Hostavin® 3058 LIQ
Product Information
- Excellent solubility and broad compatibility in wide range of liquid paints
- Low volatility and excellent stabilization efficiency
- Non interacting with photoinitiator radicals during UV curing process
- The low migration properties makes it suitable for use in plastic coatings
Classification according CLP regulation (Regulation (EC) No. 1272/2008, as amended).
Skin irritation, Cat. 2
Skin sensitization, Cat. 1
Acute aquatic toxicity, Cat. 1
Chronic aquatic toxicity, Cat. 1
For further information please refer to the Material Safety Data Sheet.
Chemical nature: N-ACETYL-3-DODECYL-1-(2,2,6,6-TETRAMETHYL-4-PIPERIDINYL) PYRROLIDINE-2,5-DIONE
Classification: Acylated hindered amine light stabilizer (HALS)
Delivery Specifications and (*) General Properties
Characteristics | Unit | Target value | Test method |
Appearance | yellowish liquid | QM-AA-634 | |
Gardner color | max. 5 | ISO 4630 | |
Starting material | [%] | max. 9.0 | QM-AA-930 |
Acylated HALS | [%] | min. 91 | QM-AA-930 |
*Density at 20°C | [g/cm³] | ~ 1.00 | |
*Miscibility at 20°C | [g/100g] | ||
Water | max. 0.02 | ||
n-Butanol | min. 200 | ||
White Spirit | min. 200 | ||
Xylene | min. 200 | ||
Acetone | min. 200 | ||
Ethyl Acetate | min. 200 | ||
Toluene | min. 200 |
Hostavin 3058 LIQ is widely used in clearcoat automotive OEM systems based on acid-catalyzed resin system. It is highly recommended for high solid solventborne paint systems in the general industrial coatings market.
In addition it is suitable for alkyd based wood stains and varnishes requiring long lasting performance and as an acylated HALS, Hostavin 3058 LIQ is not instantly active and therefore does not interact with the photoinitiators during the UV curing process.
Recommended dosage level of Hostavin 3058 LIQ: 1.0 - 3.0% (active additive on solid resin)
Delivery form
Liquid
Packaging
Steel drums 50 kg
Pallet 400 kg (8 drums)
Storage
Minimum shelf life is five years from the date of shipping when properly stored. Hostavin 3058 LIQ has the tendency to form a crystalline precipitate.
Heating the product to 50°C for a few hours will liquefy the product again. Other properties are not affected by this process. Store in a cool and dry place.