Additives for Paints & Coatings

Emulsogen LCN 118 is used as a nonionic emulsifier for emulsion polymerization improving the shear, temperature and electrolyte stability of polymer dispersions. The recommended usage is 2% active based on monomers.In waterborne and solvent-borne lacquers (low PVC), Emulsogen LCN 118 can be used as a compatibilizer to improve tinting strength and to reduce rub-out, water absorption, and haze effects. Dosage recommendation (supply form) in waterborne acrylic lacquers is 1.3-1.9% and in solvent-borne alkyd lacquers 0.33-0.66%. When used during the premixing phase in the production of waterborne emulsion paints (high PVC), Emulsogen LCN 118 also acts as a processing aid and helps to reduce the grinding time by faster deagglomeration of TiO2 and fillers. This is especially of interest in areas of hard water. The general dosage recommendation (supply form) for this purpose is 0.3%.

Emulsogen LCN 158 is used as a nonionic emulsifier for emulsion polymerization improving the shear, temperature and electrolyte stability of polymer dispersions. The recommended usage is 2% active based on monomers. In waterborne and solvent-borne lacquers (low PVC), Emulsogen LCN 158 can be used as a compatibilizer to improve tinting strength and to reduce rub-out, water absorption, and haze effects. Dosage recommendation (supply form) in waterborne acrylic lacquers is 1.3-1.9% and in solvent-borne alkyd lacquers 0.33-0.66%.When used during the premixing phase in the production of waterborne emulsion paints (high PVC), Emulsogen LCN 158 also acts as a processing aid and helps to reduce the grinding time by faster deagglomeration of TiO2 and fillers. This is especially of interest in areas of hard water. The general dosage recommendation (supply form) for this purpose is 0.3%.

Emulsogen LCN 287 is used as a nonionic emulsifier for the emulsion polymerization of monomers like acrylates, styrene-acrylates, styrene-butadiene, and vinyl acetate. It improves the shear, temperature and electrolyte stability of polymer dispersions. The recommended usage is 1-3% active based on monomers.Emulsogen LCN 287 also acts as wetting agent/compatibilizer in waterborne acrylic lacquers (low PVC). The general dosage (supply form) for this purpose is 1.4%-2.1%. The product is suitable for low odor paints applying for eco-labels such as Blue Angel or Ecoflower.

Emulsogen TS 200 is a nonionic wetting agent for use as a compatibilizer in waterborne high PVC paints, as well as in waterborne and solvent-borne low PVC lacquers. The general dosage (supply form) is 1.0-1.5% in emulsion paints and in acrylic lacquers, and 0.25% in alkyd lacquers. The additive can also be used as a dispersing agent in water-based pigment preparations, suitable for organic pigments and carbon blacks. Emulsogen TS 200 is recommended for POS-colorants as well as for concentrates for in-plant tinting. The general dosage recommendation is 5-30% on organic pigments and 20-40% on carbon black.Furthermore, Emulsogen TS 200 acts as a nonionic emulsifier for the emulsion polymerization of monomers like acrylates, styrene-acrylates, and vinyl acetate.

Genapol O 080 is a nonionic wetting agent for use as compatibilizer in waterborne high PVC paints, as well as in waterborne low PVC lacquers. The general dosage (supply form) is 0.5-1.0% in emulsion paints and 1.0-1.5% in acrylic lacquers.

Dispersogen PLF 100 is a polymeric dispersing agent. It is distinguished by its superior storage stability, excellent color strength and low foaming during pigment paste fabrication. When applied in a finished paint it shows reduced blocking and low leaching for exterior paints. Dispersogen PLF 100 can be used not only for organic pigments, but also for selected inorganic pigments and carbon black. It is APEO/ NPEO-free, low VOC and free of any organic solvents and structural units of concern. Dispersogen PLF complies with criteria of the European Ecoflower, the German Blue Angel and the Scandinavian Nordic Swan.

Dispersogen LFH is an anionic, surfactant-based dispersing agent for water-based pigment preparations, suitable for inorganic and organic pigments and carbon blacks.Dispersogen LFH is recommended for use in point-of-sales colorants and concentrates for in-plant tinting, in combination with a nonionic dispersing agent such as Dispersogen MT 200. The general dosage recommendation is 4-20% on organic pigments and 1-6% on inorganic pigments.

Dispersogen PTS is a nonionic, surfactant based dispersing agent for water-based pigment preparations, suitable for organic pigments and carbon blacks.The product is recommended for use in point-of-sales colorants and concentrates for in-plant tinting. The general dosage recommendation is 5-40% on organic pigments.

Dispersogen PL 30 is a nonionic, polymeric dispersing agent for water-based pigment preparations, suitable for organic pigments and specialty carbon blacks.The product is recommended for use in concentrates for in-plant tinting. The general dosage recommendation is 10 - 40% on organic pigments. Dispersogen PL 30 also acts as wetting agent/compatibilizer in waterborne high PVC paints as well as in waterborne and solvent-borne low PVC lacquers. The general dosage is 0.5-1.0% in emulsion paints, 1.0-1.5% in acrylic lacquers and 0.25-0.5% in alkyd lacquers.

Dispersogen ECS is an anionic, surfactant-based dispersing agent for water-based and solvent-based pigment preparations, suitable for organic pigments and specialty carbon blacks. The product is especially recommended for use in in-plant tinters. The general dosage recommendation is 20 - 50 % on organic pigments. Dispersogen ECS also acts as wetting agent/compatibilizer in waterborne high PVC paints as well as in waterborne and solvent-borne low PVC lacquers. The general dosage (in supply form) is 1.7-3.3% in emulsion paints, 3.3-5.0% in acrylic lacquers and 0.85-1.7% in alkyd lacquers.

Emulsogen TS 200 is a nonionic wetting agent for use as a compatibilizer in waterborne high PVC paints, as well as in waterborne and solvent-borne low PVC lacquers. The general dosage (supply form) is 1.0-1.5% in emulsion paints and in acrylic lacquers, and 0.25% in alkyd lacquers. The additive can also be used as a dispersing agent in water-based pigment preparations, suitable for organic pigments and carbon blacks. Emulsogen TS 200 is recommended for POS-colorants as well as for concentrates for in-plant tinting. The general dosage recommendation is 5-30% on organic pigments and 20-40% on carbon black.Furthermore, Emulsogen TS 200 acts as a nonionic emulsifier for the emulsion polymerization of monomers like acrylates, styrene-acrylates, and vinyl acetate.

Methoxy polyethylene glycols ether with a molecular weight of 350 - 2000 g/mole are commonly used as a chemical intermediate in the production of alkyd emulsions and HEUR thickener.

Polyglykols with a molecular weight of 6000 to 12000 g/mole are commonly used as chemical intermediate in the production of HEUR thickener.

Emulsogen EPA 073 is used as anionic emulsifier for the emulsion polymerization of monomers like pure acrylic, styrene-acrylic acid esters and vinyl acetate.

Emulsogen EPN 287 is used as nonionic emulsifier for the emulsion polymerization of monomers like acrylates, styrene-acrylates, styrene-butadiene and vinyl acetate.

Emulsogen LCN 118 is used as a nonionic emulsifier for emulsion polymerization improving the shear, temperature and electrolyte stability of polymer dispersions. The recommended usage is 2% active based on monomers.In waterborne and solvent-borne lacquers (low PVC), Emulsogen LCN 118 can be used as a compatibilizer to improve tinting strength and to reduce rub-out, water absorption, and haze effects. Dosage recommendation (supply form) in waterborne acrylic lacquers is 1.3-1.9% and in solvent-borne alkyd lacquers 0.33-0.66%. When used during the premixing phase in the production of waterborne emulsion paints (high PVC), Emulsogen LCN 118 also acts as a processing aid and helps to reduce the grinding time by faster deagglomeration of TiO2 and fillers. This is especially of interest in areas of hard water. The general dosage recommendation (supply form) for this purpose is 0.3%.

Emulsogen LCN 158 is used as a nonionic emulsifier for emulsion polymerization improving the shear, temperature and electrolyte stability of polymer dispersions. The recommended usage is 2% active based on monomers. In waterborne and solvent-borne lacquers (low PVC), Emulsogen LCN 158 can be used as a compatibilizer to improve tinting strength and to reduce rub-out, water absorption, and haze effects. Dosage recommendation (supply form) in waterborne acrylic lacquers is 1.3-1.9% and in solvent-borne alkyd lacquers 0.33-0.66%.When used during the premixing phase in the production of waterborne emulsion paints (high PVC), Emulsogen LCN 158 also acts as a processing aid and helps to reduce the grinding time by faster deagglomeration of TiO2 and fillers. This is especially of interest in areas of hard water. The general dosage recommendation (supply form) for this purpose is 0.3%.

Emulsogen LCN 287 is used as a nonionic emulsifier for the emulsion polymerization of monomers like acrylates, styrene-acrylates, styrene-butadiene, and vinyl acetate. It improves the shear, temperature and electrolyte stability of polymer dispersions. The recommended usage is 1-3% active based on monomers.Emulsogen LCN 287 also acts as wetting agent/compatibilizer in waterborne acrylic lacquers (low PVC). The general dosage (supply form) for this purpose is 1.4%-2.1%. The product is suitable for low odor paints applying for eco-labels such as Blue Angel or Ecoflower.

Emulsogen LCN 407 is used as nonionic emulsifier for the emulsion polymerization of monomers like acrylates, styrene-acrylates and vinyl acetate.

JMAC Composite PG is a preservative active with antimicrobial properties that reduces the spread of bacteria over the long term. The attractiveness of JMAC’s antimicrobial protection is reinforced by its low toxicity, non-sensitizing performance and very low environmental impact. JMAC meets Ecolabel standards for use in paints and coatings. Paint and coatings manufacturers benefit from easy and economical formulation. The JMAC biocides are effective at very small ppm addition levels and offer low viscosity liquid dispersion. Safe handling is assured through the non-flammability, non-corrosive nature of JMAC. For In-can preservation, the excellent thermal and pH stability of JMAC biocides means they can be used in a wide range of industrial applications, such as polymer emulsions, paints, sealants and adhesives.

JMAC LP 10 is a preservative active with antimicrobial properties that reduces the spread of bacteria over the long term. The attractiveness of JMAC’s antimicrobial protection is reinforced by its low toxicity, non-sensitizing performance and very low environmental impact. JMAC meets Ecolabel standards for use in paints and coatings. JMAC is also suitable for home care applications.