Ethylene Dichloride and Therephthalic Acid Catalysts

Catalysts for the production of Ethylene Dichloride and for the purification of Terephthalic Acid

Ethylene_Derivatives_Picture

Production of Ethylene Dichloride (EDC) by Oxychlorination

PVC (polyvinyl chloride) is one of the most widely manufactured synthetic plastic polymers. PVC is produced by polymerizing vinyl chloride monomer (VCM). Ethylene dichloride (EDC) forms the basis for this process. It is made from ethylene in a fluid-bed reactor via an oxychlorination process.

Clariant has offered catalysts for this oxychlorination process since 1983, and has continually improved their performance. Today, more than 40 plants operate with Clariant’s OxyMax® fluid-bed catalyst series.

OxyMax® has been optimized for both air- and oxygen-fed fluid-bed processes. It works under a wide range of operative conditions, such as different feed gas compositions, temperatures, or plant capacities. OxyMax® catalysts offer high selectivity to EDC, combined with high activity and stability during operation.

  • OxyMax® A: for all standard fluid-bed applications
  • OxyMax® B: for medium and high temperatures (225-240°C)
  • OxyMax® V: provides maximum performance in fluid-bed reactors
  • OxyMax® M: for fluid-bed reactors using Mitsui Chemicals technology
  • OxyMax® MW: make-up catalyst for reactors using OxyChem’s Catoxid technology
  • OxyMax® S: make-up catalyst recommended when high loss of fine particles occurs; developed to increase the activity and to restore fines.

Purification of Terephthalic Acid (PTA)

Terephthalic acid is a precursor to the polyester PET, used to make plastic bottles and clothing. Crude terephthalic acid is produced by catalytic air oxidation of p-xylene. During this process, unwanted by-products are formed. One in particular, 4-carboxybenzaldehyde (4-CBA), needs to be removed, as it is a colored compound.

Therefore, the crude terephthalic acid is purified in a fixed-bed reactor using Clariant’s H2MAX® catalyst: the colored by-products are hydrogenated to uncolored and water-soluble substances. In the end, the purified terephthalic acid (PTA) has typically less than 20 parts-per-million (ppm) of 4-CBA.

H2MAX® catalysts contain palladium, a precious metal. Clariant produces the catalysts with a unique production technology that assures their activity remain stable for a long time. For precious metal catalysts, it is important that they preserve as much as possible of the valuable metal during operation. H2MAX® retains more palladium during its lifetime than other state-of-the-art catalysts. This means that customers save money, as they need to buy less palladium.

  • H2Max® 50: standard grade PTA catalyst with strong palladium retention
  • H2Max® HD: providing even higher palladium retention thanks to patented dispersion and distribution of the precious metal on the support structure

Request to Clariant

Please enter your contact information so we are able to process your request. Thank you for your interest.

Your Personal Catalyst Expert
Your Personal Catalyst Expert
Clariant Catalysts
Disclaimer:
This information corresponds to the present state of our knowledge and is intended as a general description of our products and their possible applications. Clariant makes no warranties, express or implied, as to the information’s accuracy, adequacy, sufficiency or freedom from defect and assumes no liability in connection with any use of this information. Any user of this product is responsible for determining the suitability of Clariant’s products for its particular application.<br />
<br />
* Nothing included in this information waives any of Clariant’s General Terms and Conditions of Sale, which control unless it agrees otherwise in writing. Any existing intellectual/industrial property rights must be observed. Due to possible changes in our products and applicable national and international regulations and laws, the status of our products could change. Material Safety Data Sheets providing safety precautions, that should be observed when handling or storing Clariant products, are available upon request and are provided in compliance with applicable law. You should obtain and review the applicable Material Safety Data Sheet information before handling any of these products. For additional information, please contact Clariant.<br />
<br />
* For sales to customers located within the United States and Canada the following applies in addition: No express or implied warranty is made of the merchantability, suitability, fitness for a particular purpose or otherwise of any product or service.<br />
<br />
© Trademark of Clariant registered in many countries.<br />
® 2019 Clariant International Ltd 

You are about to leave the Clariant domain

The link you activated will take you outside the Clariant site in about 10 seconds. If you want to stop this, press "Cancel".