Biocides for Metalworking Fluids

Water-based fluids are sensitive to attack by bacteria and fungi. The appropriate biocide is essential to control the presence of micro-organisms and the formation of biofilms in order to maintain the performance and lifetime of the fluid.

   

ILBiocides

James Stephens
James Stephens
Contact Person

Request to Clariant

Product Highlights

  • Nipacide BIT 20

    Nipacide BIT 20 is an in-can biocide based on BIT. Nipacide BIT 20 is a glycol based solution; low toxicity biocide developed for the complete in-can protection of water based products. Nipacide BIT 20 is effective against a wide range of microorganisms including gram positive and gram negative bacteria, yeast and fungi. Nipacide BIT 20 can be used over a wide pH and temperature range. Nipacide BIT 20 should be the biocide of choice for products with pH >8 and production temperatures of >40 C. more

  • Nipacide BK

    Nipacide BK is an in-can biocide basen on Hexahydrotriazine (HHT). Nipacide BK is an aqueous based low toxicity biocide developed for the complete in-can protection of water based products. Nipacide BK is effective against a wide range of microorganisms including gram positive and gram negative bacteria, yeast and fungi. Nipacide BK can be used over a wide pH and temperature range. more

  • Nipacide FC

    Nipacide FC is an in-can biocide based on EMMD. more

  • Nipacide MBM

    Nipacide MBM is a low toxicity biocide developed for use in metal working concentrates. Nipacide MBM is effective against a wide range of microorganisms including gram positive and gram negative bacteria, yeast and fungi. Microorganisms grow at a rapid rate and without use of the correct biocide, numbers can increase dramatically. more

Request to Clariant

Please enter your contact information so we are able to process your request. Thank you for your interest.

Judith Jakob
Judith Jakob
Contact Person
Disclaimer:
This information corresponds to the present state of our knowledge and is intended as a general description of our products and their possible applications. Clariant makes no warranties, express or implied, as to the information’s accuracy, adequacy, sufficiency or freedom from defect and assumes no liability in connection with any use of this information. Any user of this product is responsible for determining the suitability of Clariant’s products for its particular application.<br />
<br />
* Nothing included in this information waives any of Clariant’s General Terms and Conditions of Sale, which control unless it agrees otherwise in writing. Any existing intellectual/industrial property rights must be observed. Due to possible changes in our products and applicable national and international regulations and laws, the status of our products could change. Material Safety Data Sheets providing safety precautions, that should be observed when handling or storing Clariant products, are available upon request and are provided in compliance with applicable law. You should obtain and review the applicable Material Safety Data Sheet information before handling any of these products. For additional information, please contact Clariant.<br />
<br />
* For sales to customers located within the United States and Canada the following applies in addition: No express or implied warranty is made of the merchantability, suitability, fitness for a particular purpose or otherwise of any product or service.<br />
<br />
© Trademark of Clariant registered in many countries.<br />
® 2019 Clariant International Ltd 

You are about to leave the Clariant domain

The link you activated will take you outside the Clariant site in about 10 seconds. If you want to stop this, press "Cancel".