Our portfolio include selected performance packages such as emulsifier, inhibitor and lubricating packages as well as and ready-to-use packages for metal working fluids, de-watering fluids and compressor oils for cooling units.

   

ILPackages  Concentrates

James Stephens
James Stephens
Contact Person

Request to Clariant

Product Highlights

  • Emulsogen 3971 N

    Emulsogen 3971 N is an emulsifier package with good corrosion protecting properties for milky, opaque and transparent metal working fluids and fire resistant hydraulic fluids. Emulsogen 3971 N is dispersible in water and in mineral oil. Mineral oil based formulations show no gelation tendency, form spontaneously emulsions and are stable in hard water. more

  • Emulsogen ENF

    Emulsogen ENF is a nonylphenol-free ready-to use package for de-watering fluids, providing wetting agent and corrosion inhibiting properties to the formulation. A special drying process used in metalworking consists in briefly immersing the metal parts in solvents such as white spirit, kerosene or similar hydrocarbons. The rapid separation of the water from the metal surface is effected by a wetting agent. Selected corrosion inhibitors in the wetting agent impart adequate temporary corrosion protection to the metal parts under normal temperature and humidity conditions. The corrosion protection depends on storage and environmental conditions. Emulsogen ENF is tailor-made for this application. It is used at a concentration of only 0.6-1.2%. The water adhering to the metal surface is displaced within a few seconds when metal parts are dipped in the dewatering fluid. The metal parts are then effectivly protected against corrosion during storage. more

  • Emulsogen T

    Emulsogen T is a emulsifier package for metal working emulsions based on vegetable oils. Emulsogen T is tailored for optimum emulsification of most triglycerides. more

  • Hostacor BIT

    Hostacor BIT is used as corrosion inhibitor package for fully synthetic metal working fluids. It can be used alone or in combination with other water-soluble corrosion inhibitors, glycols and EO/PO block- or copolymers for mineral oil free cutting and grinding fluids. Hostacor BIT is water miscible, stable against water hardness and low foaming. more

  • Hostacor IT

    Hostacor IT is a pre-neutralized, low foaming corrosion inhibitor mainly used in cutting & grinding fluids, in rolling emulsions and water-based hydraulic fluids (HFA-E, HFA-S). Hostacor IT is an excellent corrosion inhibitors for steel and show very good hard water stability. It can be used alsone or in combination with other water-soluble corrosion inhibitors or lubricants. more

  • Inhibitor concentrate 2038

    Inhibitor concentrate 2038 is used in fire resistant HFC hydraulic fluids to protect steel, yellow metals, zinc and aluminum against corrosion and deposits on the metal surface. more

  • Inhibitor concentrate HFC

    Inhibitor concentrate HFC is used in fire resistant HFC hydraulic fluids to protect steel, yellow metals, zinc and aluminum against corrosion and deposits on the metal surface. more

  • Lubricant Additive 1655 N

    Lubricant Additive 1655 N is a performance package for industrial lubricants based on polyalkylene glycols. Main charateristics of gear oils containing this package are: Excellent extreme anti-wear (EP/AW) properties increasing load carrying properties and lubricity Highly improved thermo-oxidative stability Corrosion protection Increased life-time more

Request to Clariant

Please enter your contact information so we are able to process your request. Thank you for your interest.

Judith Jakob
Judith Jakob
Contact Person
Disclaimer:
This information corresponds to the present state of our knowledge and is intended as a general description of our products and their possible applications. Clariant makes no warranties, express or implied, as to the information’s accuracy, adequacy, sufficiency or freedom from defect and assumes no liability in connection with any use of this information. Any user of this product is responsible for determining the suitability of Clariant’s products for its particular application.<br />
<br />
* Nothing included in this information waives any of Clariant’s General Terms and Conditions of Sale, which control unless it agrees otherwise in writing. Any existing intellectual/industrial property rights must be observed. Due to possible changes in our products and applicable national and international regulations and laws, the status of our products could change. Material Safety Data Sheets providing safety precautions, that should be observed when handling or storing Clariant products, are available upon request and are provided in compliance with applicable law. You should obtain and review the applicable Material Safety Data Sheet information before handling any of these products. For additional information, please contact Clariant.<br />
<br />
* For sales to customers located within the United States and Canada the following applies in addition: No express or implied warranty is made of the merchantability, suitability, fitness for a particular purpose or otherwise of any product or service.<br />
<br />
© Trademark of Clariant registered in many countries.<br />
® 2019 Clariant International Ltd 

You are about to leave the Clariant domain

The link you activated will take you outside the Clariant site in about 10 seconds. If you want to stop this, press "Cancel".