Dispersogen® PLF 100 Dispersing agent


»An easier way to make stable formulations.«

Pigment pastes can be a real pain to make, but not with Dispersogen® PLF 100. One issue formulators often run into when preparing pigment concentrates is the foam formation that occurs when they grind pigments into smaller aggregates. Other problems can arise during dispersion and storage such as the development of unwanted viscosity that makes it hard to formulate pigment concentrates that fully satisfy paint manufacturers.

Dispersogen® PLF 100 is a dispersing agent that offers a reliable solution to these challenges. In our tests, paints formulated with our product clearly exhibited lower foaming during grinding and smaller viscosity changes during storage than paints prepared with the market alternatives. Due to its strong dispersion power, this paint additive also imparted excellent color strength.



Any questions?
Our experts are standing by to offer you more details. Would you like to get in touch with one of them?

Improved Storage

Any questions?
Our experts are standing by to offer you more details. Would you like to get in touch with one of them?


Dispersogen® PLF 100
Alternative 1
Alternative 2
Low foaming
Storage stability
Color strength
Organic pigments
Inorganic pigments*
Low leaching
Reduced blocking
*excellent performance for selected global pigment grades

Looking for more products?

  • Stabilizers

    Stabilizers are critical to paint formulations as they influence the paint’s flow behavior by buffering the interactions between paint ingredients. more

  • Dispersing agents

    Our dispersing agents control viscosity, prevent sedimentation and enable high tinting strength in the final application. more

  • Neutralizing agents for Waterborne Paints

    Our neutralizing agents enhance the performance and quality of the paint formulation as well as its complexity by reducing the overall amount of additives. more

Any questions? Contact us!

Marc Chan
Marc Chan
Contact Person
This information corresponds to the present state of our knowledge and is intended as a general description of our products and their possible applications. Clariant makes no warranties, express or implied, as to the information’s accuracy, adequacy, sufficiency or freedom from defect and assumes no liability in connection with any use of this information. Any user of this product is responsible for determining the suitability of Clariant’s products for its particular application.<br />
<br />
* Nothing included in this information waives any of Clariant’s General Terms and Conditions of Sale, which control unless it agrees otherwise in writing. Any existing intellectual/industrial property rights must be observed. Due to possible changes in our products and applicable national and international regulations and laws, the status of our products could change. Material Safety Data Sheets providing safety precautions, that should be observed when handling or storing Clariant products, are available upon request and are provided in compliance with applicable law. You should obtain and review the applicable Material Safety Data Sheet information before handling any of these products. For additional information, please contact Clariant.<br />
<br />
* For sales to customers located within the United States and Canada the following applies in addition: No express or implied warranty is made of the merchantability, suitability, fitness for a particular purpose or otherwise of any product or service.<br />
<br />
© Trademark of Clariant registered in many countries.<br />
® 2019 Clariant International Ltd 

You are about to leave the Clariant domain

The link you activated will take you outside the Clariant site in about 10 seconds. If you want to stop this, press "Cancel".

Request to Clariant

Please enter your contact information so we are able to process your request. Thank you for your interest.

Marc Chan
Marc Chan
Contact Person