Concentrate for organic defoamers

Edition Date :
January 08, 2021
D-FOAM-R C119 is a 16% nominal, hydrophobic silica dispersion in hydrotreated paraffinic mineral oil. D-FOAM-R C119 is primarily used as a concentrate to build fully formulated organic defoamers for coatings, inks, adhesives, pulp & paper and many other industrial uses.
Marc Chan
Marc Chan
Contact Person

Request to Clariant

Order Sample Print this page
Product Function
  • Defoamer

Download File

Please enter your contact details and the file will start downloading immediately after your details have been submitted. This only has to be done for the first file you download on this site. Thank you for your understanding.

Personal Information


Please choose one of the available product configurations:
No files are available for this product.

Login Required

Log in or register to ClariHub for our full set of ingredient documentation, formulations and more resources!
For regulatory details such as the classification and labelling as dangerous substances or goods please refer to our corresponding Material Safety Data Sheet.
Technical Data
Appearance Opaque, light tan colored liquid
Specific gravity 0.89 g/cm³
Flash point (PMCC) Greater than 149°C/300°F
Typical applications for D-FOAM-R are:
  • Waterborne Coatings and Adhesives
D-FOAM-R C119 is typically used as a formulation concentrate. It is readily compatible with mineral oils, hydrophobic polyglycols, PEG esters and other mineral oil based dispersions. Acceptable stability of the silica suspension is generally accomplished by maintaining a minimum formula viscosity of approximately 800 cps.
Handling and Storage
Keep containers closed and protect from heat, weather or direct sunlight. Do not store in close proximity to strong oxidizers, sparks or flame. Seal partially used containers to protect from contamination or absorption of moisture (which can be detrimental to product quality and performance).
This information corresponds to the present state of our knowledge and is intended as a general description of our products and their possible applications. Clariant makes no warranties, express or implied, as to the information’s accuracy, adequacy, sufficiency or freedom from defect and assumes no liability in connection with any use of this information. Any user of this product is responsible for determining the suitability of Clariant’s products for its particular application.<br />
<br />
* Nothing included in this information waives any of Clariant’s General Terms and Conditions of Sale, which control unless it agrees otherwise in writing. Any existing intellectual/industrial property rights must be observed. Due to possible changes in our products and applicable national and international regulations and laws, the status of our products could change. Material Safety Data Sheets providing safety precautions, that should be observed when handling or storing Clariant products, are available upon request and are provided in compliance with applicable law. You should obtain and review the applicable Material Safety Data Sheet information before handling any of these products. For additional information, please contact Clariant.<br />
<br />
* For sales to customers located within the United States and Canada the following applies in addition: No express or implied warranty is made of the merchantability, suitability, fitness for a particular purpose or otherwise of any product or service.<br />
<br />
© Trademark of Clariant registered in many countries.<br />
® 2019 Clariant International Ltd 

You are about to leave the Clariant domain

The link you activated will take you outside the Clariant site in about 10 seconds. If you want to stop this, press "Cancel".

Request to Clariant

Please enter your contact information so we are able to process your request. Thank you for your interest.

Marc Chan
Marc Chan
Contact Person