Licowax® O flakes
Partly saponified, bright ester wax

Licowax® O flakes

Partly saponified, bright ester wax

Edition Number :
6
Edition Date :
September 11, 2015
Licowax O flakes is a partly saponified ester wax.
Benefits
  • Excellent paste forming properties
  • Excellent solvent binding capacity
  • Protection and gloss properties

 

Hazards
The product does not require a hazard warning label according CLP regulation (Regulation (EC) No. 1272/2008, as amended).
For further information please refer to the Material Safety Data Sheet.
Delivery Specifications and (*) General Properties
 
Characteristics   Unit   Target value   Test method 
Appearance    yellowish flakes   QM-AA-634  
Acid value  [mg KOH/g]   10 - 15   ISO 2114  
Saponification value  [mg KOH/g]   105 - 135   ISO 3681  
Drop point  [°C]   96 - 102   ISO 2176  
*Viscosity  [mPa·s]   ~ 200   DIN 53019 at 120°C  
*Density (23°)  [g/cm³] ~ 1,02 ISO 1183
Excellent paste forming properties and solvent-binding capacity with organic hydrocarbon solvents for hard pasty polish products.
Pasty floor, shoe, car and leather care products, corrosion agents and grinding agents.
Delivery form
Flakes

Packaging
Polyethylene bag 20 kg
Pallet 1000 kg (50 bags)
 
Storage
For best shelf life store this product in a dry area at normal ambient temperatures.
Minimum shelf life is 2 years from the date of shipping when properly stored.
Documents
There are no documents available for this product.
Contact Us
Please contact us for safety and regulatory details or the Material Safety Data Sheet (MSDS).

Download File

Please enter your contact details and the file will start downloading immediately after your details have been submitted. This only has to be done for the first file you download on this site. Thank you for your understanding.

Personal Information

Alexis Miller
Alexis Miller
Contact Person

Request to Clariant

Request to Clariant

Please enter your contact information so we are able to process your request. Thank you for your interest.

Alexis Miller
Alexis Miller
Contact Person
Disclaimer:
This information corresponds to the present state of our knowledge and is intended as a general description of our products and their possible applications. Clariant makes no warranties, express or implied, as to the information’s accuracy, adequacy, sufficiency or freedom from defect and assumes no liability in connection with any use of this information. Any user of this product is responsible for determining the suitability of Clariant’s products for its particular application.<br />
<br />
* Nothing included in this information waives any of Clariant’s General Terms and Conditions of Sale, which control unless it agrees otherwise in writing. Any existing intellectual/industrial property rights must be observed. Due to possible changes in our products and applicable national and international regulations and laws, the status of our products could change. Material Safety Data Sheets providing safety precautions, that should be observed when handling or storing Clariant products, are available upon request and are provided in compliance with applicable law. You should obtain and review the applicable Material Safety Data Sheet information before handling any of these products. For additional information, please contact Clariant.<br />
<br />
* For sales to customers located within the United States and Canada the following applies in addition: No express or implied warranty is made of the merchantability, suitability, fitness for a particular purpose or otherwise of any product or service.<br />
<br />
© Trademark of Clariant registered in many countries.<br />
® 2019 Clariant International Ltd 

You are about to leave the Clariant domain

The link you activated will take you outside the Clariant site in about 10 seconds. If you want to stop this, press "Cancel".