Sanodure® Bronze 2LW
Aluminium Dye

Sanodure® Bronze 2LW

Aluminium Dye

Edition Date :
December 18, 2018
Sanodure Bronze 2LW is a homogeneous, water soluble dyestuff for the adsorptive dyeing of anodised aluminium. Only recommended for interior use.
Benefits
  • Suitable for indoor applications
  • Good fade resistant properties
Get in Contact Print this page
Product Data
Applications
Packaging and Handling

Product Data

Delivery Form   Granules
Solubility in water
(20°C/69°F)  5 [g/l]
Recommended dye bath
pH 5-6
Recommended dye bath buffer Sodium Acetate
Light fastness   7
Single dye   ✓
Dye blend   -

Applications

Sanodure® Bronze 2LW  is widely used for bronze shades, and on thicker anodic coatings and at higer concentrations it produces an attractive deep reddish brown.

Sanodure dyes are recommended for all kind of indoor applications.

This dye is of special interest for the following applications:
  • short time dyeing
  • cold dyeing
  • dyeing of continuously produced oxide coatings (coil anodizing or similar thin coatings)
  • dyeing of cast parts of high silicon content
  • dyeing of oxide coatings with low adsorption power

Packaging and Handling

Mark Self
Mark Self
Contact Person
Get in Contact

Request to Clariant

close

Please enter your contact information so we are able to process your request. Thank you for your interest.

Mark Self
Mark Self
Contact Person
Send Message

Request to Clariant

close

Please enter your contact information so we are able to process your request. Thank you for your interest.

Mark Self
Mark Self
Contact Person
Send Message
Disclaimer: 
This information corresponds to the present state of our knowledge and is intended as a general description of our products and their possible applications. Clariant makes no warranties, express or implied, as to the information’s accuracy, adequacy, sufficiency or freedom from defect and assumes no liability in connection with any use of this information. Any user of this product is responsible for determining the suitability of Clariant’s products for its particular application.<br />
<br />
* Nothing included in this information waives any of Clariant’s General Terms and Conditions of Sale, which control unless it agrees otherwise in writing. Any existing intellectual/industrial property rights must be observed. Due to possible changes in our products and applicable national and international regulations and laws, the status of our products could change. Material Safety Data Sheets providing safety precautions, that should be observed when handling or storing Clariant products, are available upon request and are provided in compliance with applicable law. You should obtain and review the applicable Material Safety Data Sheet information before handling any of these products. For additional information, please contact Clariant.<br />
<br />
* For sales to customers located within the United States and Canada the following applies in addition: No express or implied warranty is made of the merchantability, suitability, fitness for a particular purpose or otherwise of any product or service.<br />
<br />
© Trademark of Clariant registered in many countries.<br />
® 2019 Clariant International Ltd

You are about to leave the Clariant domain

close

The link you activated will take you outside the Clariant site in about 10 seconds. If you want to stop this, press "Cancel".

OK Cancel

close