Anodal® EC-2
Aluminum Chemical

Anodal® EC-2

Aluminum Chemical

Edition Date :
May 14, 2019
Anodal® EC-2 Liquid is a silicate- and chlorate-free liquid sequestrant for the preparation of E-6 long-term etching baths for aluminum and its alloys.
Benefits
  • very good E6 effect
  • good levelling with little erosion
  • very good results even with Zn-containing alloys
  • low application concentration: 25-50 g/l
  • Aluminum content over 150 g/l possible
  • low viscosity
  • titratable
  • very good degradability
  • premixing with caustic soda is possible
Appearance Clear, slightly yellowish liquid
Density [kg/m3] approx. 1170
pH value 10-11
Storage stability 5 years in the original container at 5-30°C
Anodal® EC-2
  • is applied as an addition to caustic soda for satin and matt finishes on aluminum parts by the immersion method before anodizing. With an aluminum content of 100-150 g/l this treatment imparts a uniform, matt, decorative appearance to the aluminum parts. Minor surface imperfections are usually completely or almost completely covered
  • prevents the formation and deposition of aluminate on the walls of the vessels and heating coils
Documents
Contact Us
Please contact us for safety and regulatory details or the Material Safety Data Sheet (MSDS).
Print this page

Download File

Please enter your contact details and the file will start downloading immediately after your details have been submitted. This only has to be done for the first file you download on this site. Thank you for your understanding.

Personal Information

Your Name *

 

Your Email *

Your position

Your Company

Mark Self

Mark Self

Contact Person

Request to Clariant

Please enter your contact information so we are able to process your request. Thank you for your interest.

Mark Self

Mark Self

Contact Person

Your Name

 

Your Email

Phone

Your Company

Country

Message

Related products

Request to Clariant

Please enter your contact information so we are able to process your request. Thank you for your interest.

Mark Self

Mark Self

Contact Person

Your Name

 

Your Email

Phone

Your Company

Country

Message

Disclaimer:
This information corresponds to the present state of our knowledge and is intended as a general description of our products and their possible applications. Clariant makes no warranties, express or implied, as to the information’s accuracy, adequacy, sufficiency or freedom from defect and assumes no liability in connection with any use of this information. Any user of this product is responsible for determining the suitability of Clariant’s products for its particular application.<br />
<br />
* Nothing included in this information waives any of Clariant’s General Terms and Conditions of Sale, which control unless it agrees otherwise in writing. Any existing intellectual/industrial property rights must be observed. Due to possible changes in our products and applicable national and international regulations and laws, the status of our products could change. Material Safety Data Sheets providing safety precautions, that should be observed when handling or storing Clariant products, are available upon request and are provided in compliance with applicable law. You should obtain and review the applicable Material Safety Data Sheet information before handling any of these products. For additional information, please contact Clariant.<br />
<br />
* For sales to customers located within the United States and Canada the following applies in addition: No express or implied warranty is made of the merchantability, suitability, fitness for a particular purpose or otherwise of any product or service.<br />
<br />
© Trademark of Clariant registered in many countries.<br />
® 2019 Clariant International Ltd 

You are about to leave the Clariant domain

The link you activated will take you outside the Clariant site in about 10 seconds. If you want to stop this, press "Cancel".