Hostaperm Pink E for Paints and Coatings
Pigment Red 122
Edition Date :
May 16, 2013
Hostaperm Pink E is a blue shade quinacridone pigment with high tinctorial strength and the outstanding fastness properties of this group of pigments.
Benefits
- Very high weather fastness
- Very high overspray fastness
- High tinting strength and brilliance
Product Data
Application Profile- Automotive Coatings
- Industrial Coatings
- Decorative Paints
Special Recommendations
Air-drying Alkyds |
● | |
Physically Drying Paints |
● |
|
Baking Enamels |
● | |
Acid Cured Paints |
● |
|
Amine Cured Epoxies |
● |
|
Isocyanate Cured Paints |
● |
|
Waterbased Paints |
● |
● recommended
○ limited suitability
- not recommended
Physical Data
Density | [g/cm3] | 1.45 |
Form of Supply |
powder | |
Specific surface |
[m2/g] |
77 |
Oil absorption |
[ml/100g] | 65 |
Avg. Size of Primary Particles |
[nm] |
90 |
Heat Stability |
[°C] |
200 |
Fastness Data
to Light |
to Weathering |
||||||
|
12 month |
24 month |
|||||
LOA |
AM | LOA |
AM |
LOA |
AM |
||
Full shade |
7-8d |
7-8d | 4d | 4d | 4-5d | 4-5d | |
Deep shade | 7-8d | 7-8d | 4-5 | 4d | 4-5 | 4d | |
1/3 ST | [1:5 TiO2] |
8 | 8 | 4-5 | 4-5 | 4 | 4-5 |
1/25 ST |
[1:71 TiO2] | 7-8 | 8 | 4 | 4-5 | 4 | 4 |
Acids |
5 | ||
Water | 5 | ||
Butyl Glycol |
4-5 | ||
Methyl Ethyl Ketone |
4-5 | ||
Xylene | 5 | ||
Alkali | 5 | ||
Butanol | 4-5 | ||
Butyl Acetate |
4-5 | ||
White Spirit |
5 | ||
Dibutyl Phthalate |
5 | ||
Blooming | No blooming observed | ||
Fastness to Overpainting |
NC | AM (120°C) |
AM (160°C) |
5 | 5 | 5 |
LOA- Air-drying Long Oil Alkyd
AM- Baked Alkyd-Melamine
NC- Nitrocellulose Combination Lacquer
EcoTain


- No hazard labelling required
- Suitable for water-based colorants enabling eco labels

- Products based on renewable raw materials
- Support of environmental awareness in society
- Improved ecological footprint


- Pigments based on renewable raw material (succinic acid)

- Reducing petrochemical consumption
- Decreased amount of greenhouse gases released to the atmosphere


- Reduction of carbon footprint compared to petroleum-based products

- No performance drop-off: identical product specification independent from raw material source (bio/petrochemical succinic acid)
- Meets the demands of the automotive, architectural and industrial coatings industry