Novoperm Yellow HR 02
Pigment Yellow 83

Novoperm Yellow HR 02

Pigment Yellow 83

Edition Date :
October 06, 2014
Novoperm Yellow HR 02 is a very strong, red shade, transparent diarylide yellow pigment. It exhibits excellent light fastness properties as well as good overall fastness properties.
  • Excellent fastness properties
  • High tinctorial strength


Physical Data
Density [g/cm3] 1.49
pH-value   -
Specific surface
Average particle size
[nm] 55
Fineness of grind
Viscosity [Pa.s] -
Oil absorption
[ml/100g] 79

Fastness properties

Staining of the test medium by:
Test medium
 Powder pigment
Print / draw-down
Change of the print
Solvent mixture
5 5 5
Ethanol 5 5 5
Ethyl acetate
5 5 5
MEK 5 5 5
Toluene 5 5 5
White spirit
5 5 5
DOP 5 5 -
Paraffine 5 5 -
Butter - 5 -
Soap - 5 5
Alkali - 5 5
Acid - 5 5
Heat stability
10 min.
  30 min.
Light fastness
 1/3 SD
11.9 %
Light fastness
  10.0% 5-6
Silver laquer
Sterilization Water phase
Steam phase
  5 5  

Recommended for

Paste inks
Coldset -
Silkscreen -
Metal deco
UV curing (Offset)

Liquid inks
NC alcohol
NC acetate
 Polyvinyl butyral
 Pub gravure, Toluene
Decorative laminates
UV curring (Flexo)

■ highly recommended
● recommended
○ limited suitability
-  not tested
Chris Patterson
Chris Patterson
Contact Person

Request to Clariant

Request to Clariant

Please enter your contact information so we are able to process your request. Thank you for your interest.

Chris Patterson
Chris Patterson
Contact Person
This information corresponds to the present state of our knowledge and is intended as a general description of our products and their possible applications. Clariant makes no warranties, express or implied, as to the information’s accuracy, adequacy, sufficiency or freedom from defect and assumes no liability in connection with any use of this information. Any user of this product is responsible for determining the suitability of Clariant’s products for its particular application.<br />
<br />
* Nothing included in this information waives any of Clariant’s General Terms and Conditions of Sale, which control unless it agrees otherwise in writing. Any existing intellectual/industrial property rights must be observed. Due to possible changes in our products and applicable national and international regulations and laws, the status of our products could change. Material Safety Data Sheets providing safety precautions, that should be observed when handling or storing Clariant products, are available upon request and are provided in compliance with applicable law. You should obtain and review the applicable Material Safety Data Sheet information before handling any of these products. For additional information, please contact Clariant.<br />
<br />
* For sales to customers located within the United States and Canada the following applies in addition: No express or implied warranty is made of the merchantability, suitability, fitness for a particular purpose or otherwise of any product or service.<br />
<br />
© Trademark of Clariant registered in many countries.<br />
® 2019 Clariant International Ltd 

You are about to leave the Clariant domain

The link you activated will take you outside the Clariant site in about 10 seconds. If you want to stop this, press "Cancel".