Novoperm Yellow P-HG

Pigment Yellow 180

Edition Date :

October 06, 2014

Novoperm Yellow P-HG is a green shade benzimidazolone pigment of the P-grade range with extremely low specific conductivity (< 0,2 mS/cm), especially recommended for solvent based packaging printing inks. It exhibits high color strength, high gloss and high transparency with very good rheological and excellent fastness properties. It is used if the fastness properties of a Pigment Yellow 13 or Pigment Yellow 17 are not sufficient.

Benefits

High color strength
High gloss and high transparency
Very good rheological behaviour
Excellent fastness properties

Print this page

Product Data

Applications

Product Data

Physical Data

Density	[g/cm³]	1.40
pH-value		-
Specific surface	[m²/g]	44
Average particle size	[nm]	140
Fineness of grind	[µm]	-
Viscosity	[Pa.s]	-
Oil absorption	[ml/100g]	76

Fastness properties

	Staining of the test medium by:
Test medium	Powder pigment	Print / draw-down	Change of the print
Solvent mixture	5	-	-
Ethanol	5	-	-
Ethyl acetate	5	-	-
MEK	5	-	-
Toluene	5	-	-
White spirit	5	-	-
DOP	5	-	-
Paraffine	5	5	-
Butter	-	5	-
Soap	-	5	5
Alkali	-	5	5
Acid	-	5	5

Heat stability	10 min.	180°C
	30 min.	180°C

Light fastness	1/3 SD	5.0 %	6
Light fastness		10.0%	7

Silver laquer	-
Sterilization	Water phase	Steam phase
	-	-

Applications

Recommended for

Paste inks

Sheetfed	●
Heatset	●
Coldset	-
Silkscreen	●
Metal deco	●
UV curing (Offset)	■

Liquid inks

NC alcohol	■
NC acetate	■
Waterbased	○
Polyvinyl butyral	■
Polyamide	-
Pub gravure, Toluene	-
Decorative laminates	●
UV curring (Flexo)	■

■ highly recommended
● recommended
○ limited suitability
- not tested

Documents

There are no documents available for this product.

Contact Us
Please contact us for safety and regulatory details or the Material Safety Data Sheet (MSDS).

Print this page

Please enter your contact details and the file will start downloading immediately after your details have been submitted. This only has to be done for the first file you download on this site. Thank you for your understanding.

Personal Information

Send Request

Chris Patterson

Contact Person

+17043317789

This information corresponds to the present state of our knowledge and is intended as a general description of our products and their possible applications. Clariant makes no warranties, express or implied, as to the information’s accuracy, adequacy, sufficiency or freedom from defect and assumes no liability in connection with any use of this information. Any user of this product is responsible for determining the suitability of Clariant’s products for its particular application. * Nothing included in this information waives any of Clariant’s General Terms and Conditions of Sale, which control unless it agrees otherwise in writing. Any existing intellectual/industrial property rights must be observed. Due to possible changes in our products and applicable national and international regulations and laws, the status of our products could change. Material Safety Data Sheets providing safety precautions, that should be observed when handling or storing Clariant products, are available upon request and are provided in compliance with applicable law. You should obtain and review the applicable Material Safety Data Sheet information before handling any of these products. For additional information, please contact Clariant. * For sales to customers located within the United States and Canada the following applies in addition: No express or implied warranty is made of the merchantability, suitability, fitness for a particular purpose or otherwise of any product or service. © Trademark of Clariant registered in many countries. ® 2019 Clariant International Ltd

Select your Language

Select your Region and Country

Novoperm Yellow P-HG

Pigment Yellow 180

Product Data

Applications

Download File

Personal Information

Your request has been successfully submitted. You can now continue downloading the file.

Request to Clariant

Your message was successfully sent.

Request to Clariant

Your message was successfully sent.

Disclaimer:

You are about to leave the Clariant domain