Permanent Red FGR 03

Pigment Red 112

Edition Date :
September 29, 2014
Permanent Red FGR 03 is a very transparent Naphthol AS pigment, especially recommended for offset printing inks. It exhibits high colour strength and good light- and weather fastness properties.Recommended for paste inks as well as for solvent- and water based packaging gravure and flexographic printing inks.
  • Tinctorial strength and gloss
  • High colour strength
  • High transparency
  • Good light- and weather fastness properties
Zachary Hays
Zachary Hays
Contact Person

Request to Clariant

Print this page

Download File

Please enter your contact details and the file will start downloading immediately after your details have been submitted. This only has to be done for the first file you download on this site. Thank you for your understanding.

Personal Information

Permanent Red FGR 03

Please choose one of the available product configurations:
No files are available for this product.
Product Data
Physical Data
Density [g/cm³]  1.50
pH-value   -
Specific surface
[m²/g] 33
Average particle size
[nm] 150
Fineness of grind
[µm] -
[Pa·s] -
Oil absorption
[ml/100g]  61

Fastness Data
  Staining of the test medium by:    
Test Medium Powder pigment Print / draw-down Change of the print
Solvent mixture 4 4-5 4-5
Ethanol 4-5 5 4-5
Ethyl acetate 3-4 4 4
MEK 3-4 3-4 3-4
Toluene 3-4 3-4 2
White spirit 4 5 5
DOP 4-5 5 -
Paraffine 3-4 4-5 -
Butter - 4 -
Soap - 5 4-5
Alkali - 5 5
Acid - 5 5
Heat stability 10 min.  140°C
30 min. 140°C
Light fastness 12.5% 6
Light fastness 1/3 SD 10.0% 6
Silver laquer 2-3
Sterilization Water phase Steam phase
4-5 4
Recommended for

Paste inks
Metal deco
UV curing (Offset)

Liquid inks
NC alcohol
NC acetate
Polyvinyl butyral

Pub gravure, Toluene
Decorative laminates
UV curring (Flexo)

■ highly recommended
● recommended
○ limited suitability
-  not tested

This information corresponds to the present state of our knowledge and is intended as a general description of our products and their possible applications. Clariant makes no warranties, express or implied, as to the information’s accuracy, adequacy, sufficiency or freedom from defect and assumes no liability in connection with any use of this information. Any user of this product is responsible for determining the suitability of Clariant’s products for its particular application.<br />
<br />
* Nothing included in this information waives any of Clariant’s General Terms and Conditions of Sale, which control unless it agrees otherwise in writing. Any existing intellectual/industrial property rights must be observed. Due to possible changes in our products and applicable national and international regulations and laws, the status of our products could change. Material Safety Data Sheets providing safety precautions, that should be observed when handling or storing Clariant products, are available upon request and are provided in compliance with applicable law. You should obtain and review the applicable Material Safety Data Sheet information before handling any of these products. For additional information, please contact Clariant.<br />
<br />
* For sales to customers located within the United States and Canada the following applies in addition: No express or implied warranty is made of the merchantability, suitability, fitness for a particular purpose or otherwise of any product or service.<br />
<br />
© Trademark of Clariant registered in many countries.<br />
® 2019 Clariant International Ltd 

You are about to leave the Clariant domain

The link you activated will take you outside the Clariant site in about 10 seconds. If you want to stop this, press "Cancel".

Request to Clariant

Please enter your contact information so we are able to process your request. Thank you for your interest.

Zachary Hays
Zachary Hays
Contact Person