PV Fast Pink E 01
Pigment Red 122

PV Fast Pink E 01

Pigment Red 122

Edition Date :
May 14, 2019
PV Fast Pink E 01 is a bluish red pigment with excellent fastness properties and therefore suitable for high-end applications and for coloration of most plastics.
Benefits
  • Excellent fastness to weathering

 

Physical and Chemical Properties
Density  [g/cm³]
1.45
Bulk volume [l/kg]  3.2
Average particle size  [nm] 132
Alkali resistance   5
Acid resistance   5
Specific surface [m2/g] 63


Fastness Properties
  PE PP PVC PS ABS PC
SD 1/3  [g/kg] 2.1 2.4 8.1 2.0 2.0 3.0
Hue angle  [°] 338.1 341.0 339.4 336.1 337.0 336.0
Chroma   54.7 53.0 56.3 50.5 53.1 47.4
Light fastness
(Full shade) 8 8 7 8 8 8
Light fastness
(Reduction) 8 8 7 8 7-8 8
Heat resistance  [°C] 300 300 - 300 300 310
Weathering fastness   5 - 4 - - -

Additional Technical Properties
Low warping applications Suitable
Cable sheathing Suitable
Fastness to bleeding in P-PVC 5

 

Suitable  Limited suitability Not suitable
PO POM PAN Fiber
PVC/ Rubber  PA   
PS/ ABS  PET Fiber   
PC PA Fiber   
PBT     
PUR     
PP Fiber     

 

7D5EA87A408C40EA816617E2BA78F113
63CC749EC15E4740A453A2CA3A0A629D
PeoplePEOPLE
PeopleSAFE USE, TRANSPARENCY AND INFORMATION
  • No hazard labelling required
PeopleADDRESSING MEGATRENDS AND SOCIETAL TRENDS
  • Products based on renewable raw materials
  • Support of environmental awareness in society
  • Improved ecological footprint
PeoplePLANET
PeopleRAW MATERIALS AND SUSTAINABLE SOURCING
  • Pigments based on renewable raw material (succinic acid)
PeopleRESOURCE EFFICIENCY AND ENVIRONMENTAL PROTECTION
  • Reducing petrochemical consumption
  • Decreased amount of greenhouse gases released to the atmosphere
PeoplePERFORMANCE
PeopleINTEGRATED SUSTAINABLE BUSINESS
  • Reduction of carbon footprint compared to petroleum-based products
PeoplePERFORMANCE ADVANTAGES
  • No performance drop-off: identical product specification independent from raw material source (bio/petrochemical succinic acid)
  • Meets the demands of the plastic industry

Documents
Contact Us
Please contact us for safety and regulatory details or the Material Safety Data Sheet (MSDS).

Download File

Please enter your contact details and the file will start downloading immediately after your details have been submitted. This only has to be done for the first file you download on this site. Thank you for your understanding.

Personal Information

Justin Seay
Justin Seay
Contact Person
+17043317204

Request to Clariant

Related products

Request to Clariant

Please enter your contact information so we are able to process your request. Thank you for your interest.

Justin Seay
Justin Seay
Contact Person
+17043317204
Disclaimer:
This information corresponds to the present state of our knowledge and is intended as a general description of our products and their possible applications. Clariant makes no warranties, express or implied, as to the information’s accuracy, adequacy, sufficiency or freedom from defect and assumes no liability in connection with any use of this information. Any user of this product is responsible for determining the suitability of Clariant’s products for its particular application.<br />
<br />
* Nothing included in this information waives any of Clariant’s General Terms and Conditions of Sale, which control unless it agrees otherwise in writing. Any existing intellectual/industrial property rights must be observed. Due to possible changes in our products and applicable national and international regulations and laws, the status of our products could change. Material Safety Data Sheets providing safety precautions, that should be observed when handling or storing Clariant products, are available upon request and are provided in compliance with applicable law. You should obtain and review the applicable Material Safety Data Sheet information before handling any of these products. For additional information, please contact Clariant.<br />
<br />
* For sales to customers located within the United States and Canada the following applies in addition: No express or implied warranty is made of the merchantability, suitability, fitness for a particular purpose or otherwise of any product or service.<br />
<br />
© Trademark of Clariant registered in many countries.<br />
® 2019 Clariant International Ltd 

You are about to leave the Clariant domain

The link you activated will take you outside the Clariant site in about 10 seconds. If you want to stop this, press "Cancel".