PA6 FR Using Exolit®
3D printer filament

PA6 FR Using Exolit®

3D printer filament

Edition Number :
20191028
Edition Date :
October 28, 2019
Clariant’s Exolit® non-halogenated flame retardants provide environmental friendly and sustainable solutions for products used in a variety of industries. Exolit® is a phosphorus chemistry based flame retardant and is added to Polyamide 6 to create an exceptional flame retardant 3D printer filament for parts to be used in numerous end applications.
Benefits
  • Flame retardant material
  • Semi-crystalline thermoplastic
  • High impact strength
  • High stiffness
  • Outstanding wear resistance
  • Very good temperature resistance
  • Reduced thermo-oxidative degradation
  • Improved long term heat and stability to ultraviolet and visible light

Applications*
  • Functional end use parts
  • Functional prototypes
*Subject to detailed product specifications.

Color Range
Standard
  • White
  • Black
  • Grey
  • Yellow
  • High IR transmission black
  • Purple
ColorWorks® ColorForward® consumer color directions 2019
  • MADE IN HUMAN - Protect the core (red)
  • DO NOT DISTURB - ἀταραξία von has fidanken (green blue)
ColorWorks® ColorForward® consumer color directions 2020
  • EYE AM WATCHED - Catch me if you can (orange)
Custom colors available upon request.
  • Print Temperature = 250-280°C
  • Print Speed = 20-50 mm/s
  • Bed Adhesion = A polyvinylpyrrolidone (PVP) based glue coated on a glass or carbon fiber surface
  • Bed Temperature = 80°C
  • Fan Settings = off to low

Note: parameters are dependent on printer used; Clariant tests were performed on a 3ntr A4 V3 printer.
Property Typical ValuesUnitsTest MethodTest Specimen
  white blackredanatural    
MECHANICAL PROPERTIES       
Tensile stress at yield, 50 mm/min 

59 dryb

-- cond.c

-- dry MPaISO 527Injection molded
  

41 dry

23 cond.

51 dry MPaISO 5273D printed XY / flat at 255-270°C
  

-- dry

22 cond.

 

  MPaISO 5273D printed XZ / on edge at 255-270°C
  

-- dry

-- cond.

28 dry MPaISO 5273D printed ZX / upright at 255-270°C
Tensile stress at break, 50 mm/min
58 dry62 dry
MPaISO 527Injection molded
  

40 dry

22 cond.

50 dry MPaISO 5273D printed XY / flat at 255-270°C
  

37 dry

20 cond.

  MPaISO 5273D printed XZ / on edge at 255-270°C
  

18 dry

12 cond.

28 dry MPaISO 5273D printed ZX / upright at 255-270°C
Tensile elongation at yield, 50 mm/min 

7.0 dry


 %ISO 527Injection molded
  

3.7 dry

39 cond.

3.3 dry %ISO 5273D printed XY / flat at 255-270°C
  

-- dry

34 cond.

  %ISO 5273D printed XZ / on edge at 255-270°C
  

-- dry

-- cond.

3.5 dry %ISO 5273D printed ZX / upright at 255-270°C
Tensile elongation at break, 50 mm/min
10 dry9.0 dry %ISO 527Injection molded
  

3.8 dry

42 cond.

5.7 dry %ISO 5273D printed XY / flat at 255-270°C
  

2.5 dry

36 cond.

  %ISO 5273D printed XZ / on edge at 255-270°C
  

1.3 dry

9.2 cond.

3.2 dry %ISO 5273D printed ZX / upright at 255-270°C
Tensile modulus (modulus of elasticity), 1 mm/min 4218 dry  MPaISO 527Injection molded

 

2614 dry

1042 cond.

3353 dry MPaISO 5273D printed XY / flat at 255-270°C
  

2380 dry

878 cond.

 
MPaISO 5273D printed XZ / on edge at 255-270°C
  

1379 dry

608 cond.

2129 dry MPaISO 5273D printed ZX / upright at 255-270°C
Flexural modulus 28602730 MPaISO 178Injection molded
Flexural strength 9289 MPaISO 178Injection molded
Izod impact notched 55 kJ/m2ISO 180Injection molded
Charpy impact notched 55 kJ/m2ISO 179Injection molded
  3.1
 kJ/m2ISO 1793D printed XY / flat at 255°C
Charpy impact unnotched    kJ/m2ISO 179Injection molded
  23
 kJ/m2ISO 1793D printed XY / flat at 255°C
FLAMMABILITY PROPERTIES       
UL 94 flammability rating  V-2 at 0.4 mm 
IEC 60695-11-103D printed XY / flat at 255°C

    
IEC 60695-11-10Injection molded

  V-0 at 0.8 mm 
IEC 60695-11-103D printed XY / flat at 255°C

 V-0 at 1.6 mm  
IEC 60695-11-10Injection molded

  V-0 at 1.6 mm 
IEC 60695-11-103D printed XY / flat at 255°C

 V-0 at 3.2 mmV-0 at 3.2 mm
 
IEC 60695-11-10Injection molded
THERMAL PROPERTIES       
Melting point 223222
°CISO 11357, DSCb 
Glass transition temperature   
°CISO 11357, DSCb 
Heat deflection temperature at 1.8 MPa (A) 7066 °CISO 75Injection molded
  9094 °CISO 753D printed XY / flat at 270°C
Heat deflection temperature at 0.45 MPa (B) 204178 °CISO 75Injection molded
  165174 °CISO 753D printed XY / flat at 270°C
GENERAL PROPERTIES       
Density 10981156 kg/m3ISO 1183 
pH  4.9 

1% in H2O
Water absorption 3.17.9 % ISO 6224 hours at 23°C
Water content - coulometric Karl Fischer
1070011500 μg/gISO 12937 
Water content - coulometric Karl Fischer
15001300 μg/gISO 12937after drying 
Water content 0.080.07 %
ISO 15512after drying at 120°C for 2 hours
non-volatile-matter content
92.396.7 %ISO 3251 
a. Organic based color. b. Dried at 80°C for 8 hours. c. Conditioned at 70% humidity and 25°C. d. DSC = Differential Scanning Calorimetry at 10°C/minute.

Note: results are generated according to the valid testing standards indicated above and the standard operating procedures used by the testing facilities.

Delivery Form
1.75 mm and 2.85 mm diameter 3D printer filament.

Packaging
1 kg and 5 kg spools of 3D printer filament. Custom sizes are available upon request.

Storage
Ideally store the 3D printer filament in a cool, dry place at temperatures between 5 to 25°C in a sealed container with the provided Clariant Desi Pak® desiccant bag. If the 3D printer filament has been exposed to moisture, please dry at 80°C for 3-4 hours with a vacuum or desiccant drying system if possible. Minimum shelf life is 1 year from the date of shipping when properly stored.
Documents
There are no documents available for this product.
Contact Us
Please contact us for safety and regulatory details or the Material Safety Data Sheet (MSDS).

Download File

Please enter your contact details and the file will start downloading immediately after your details have been submitted. This only has to be done for the first file you download on this site. Thank you for your understanding.

Personal Information

3D Printing
3D Printing
Contact

Request to Clariant

Related products

Request to Clariant

Please enter your contact information so we are able to process your request. Thank you for your interest.

3D Printing
3D Printing
Contact
Disclaimer:
This information corresponds to the present state of our knowledge and is intended as a general description of our products and their possible applications. Clariant makes no warranties, express or implied, as to the information’s accuracy, adequacy, sufficiency or freedom from defect and assumes no liability in connection with any use of this information. Any user of this product is responsible for determining the suitability of Clariant’s products for its particular application.<br />
<br />
* Nothing included in this information waives any of Clariant’s General Terms and Conditions of Sale, which control unless it agrees otherwise in writing. Any existing intellectual/industrial property rights must be observed. Due to possible changes in our products and applicable national and international regulations and laws, the status of our products could change. Material Safety Data Sheets providing safety precautions, that should be observed when handling or storing Clariant products, are available upon request and are provided in compliance with applicable law. You should obtain and review the applicable Material Safety Data Sheet information before handling any of these products. For additional information, please contact Clariant.<br />
<br />
* For sales to customers located within the United States and Canada the following applies in addition: No express or implied warranty is made of the merchantability, suitability, fitness for a particular purpose or otherwise of any product or service.<br />
<br />
© Trademark of Clariant registered in many countries.<br />
® 2019 Clariant International Ltd 

You are about to leave the Clariant domain

The link you activated will take you outside the Clariant site in about 10 seconds. If you want to stop this, press "Cancel".