PA6/66-GF20 FR Using Exolit®
3D printer filament

PA6/66-GF20 FR Using Exolit®

3D printer filament

Edition Number :
20190721
Edition Date :
July 21, 2019

Clariant’s Exolit® non-halogenated flame retardants provide environmental friendly and sustainable solutions for products used in a variety of industries. Clariant's flame retardant 20% glass fiber reinforced polyamide 6/66 using Exolit® (PA6/66-GF20 FR) 3D printer filament is an exceptionally printing material that has good mechanical properties and achieves UL 94 V-0 flammability standards. 

Benefits
  • Flame retardant material
  • Semi-crystalline thermoplastic
  • Good impact strength and stiffness
  • Outstanding wear resistance
  • Good temperature resistance
  • Reduced thermo-oxidative degradation
  • Improved long term heat and stability to ultraviolet and visible light

Applications*
  • Functional end use parts
  • Functional prototypes
*Subject to detailed product specifications.

Color Range
Standard
  • White
  • Black
  • Grey
  • Red
ColorWorks® ColorForward® consumer color directions 2019
  • MADE IN HUMAN - Protect the core (red)
  • DO NOT DISTURB - ἀταραξία von has fidanken (green blue)
ColorWorks® ColorForward® consumer color directions 2020
  • EYE AM WATCHED - Catch me if you can (orange)
Custom colors available upon request.
  • Print Temperature = 230-250°C
  • Print Speed = 20-50 mm/s
  • Bed Adhesion = A polyvinylpyrrolidone (PVP) based glue coated on a glass or carbon fiber surface
  • Bed Temperature = 80°C
  • Fan Settings = off to low

Note: parameters are dependent on printer used; Clariant tests were performed on Ultimaker S5 and 3ntr A4 V3 printers.
Property Typical ValuesUnitsTest MethodTest Specimen
  white blackredanatural    
MECHANICAL PROPERTIES       
Tensile stress at yield, 50 mm/min80   MPaISO 527Injection molded
  53  MPaISO 5273D printed XY / flat at 235°C
     MPaISO 5273D printed XZ / on edge at 235°C
  15  MPaISO 5273D printed ZX / upright at 235°C
Tensile stress at break, 50 mm/min7894  MPaISO 527Injection molded
  54  MPaISO 5273D printed XY / flat at 235°C
     MPaISO 5273D printed XZ / on edge at 235°C
  15  MPaISO 5273D printed ZX / upright at 235°C
Tensile elongation at yield, 50 mm/min2.9
  %ISO 527Injection molded
  3.7  %ISO 5273D printed XY / flat at 235°C
     %ISO 5273D printed XZ / on edge at 255°C
  0.8  %ISO 5273D printed ZX / upright at 235°C
Tensile elongation at break, 50 mm/min4.3   %ISO 527Injection molded
  2.3  %ISO 5273D printed XY / flat at 235°C
     %ISO 5273D printed XZ / on edge at 235°C
  0.8  %ISO 5273D printed ZX / upright at 235°C
Tensile modulus (modulus of elasticity), 1 mm/min6968   MPaISO 527Injection molded

 4963  MPaISO 5273D printed XY / flat at 235°C
     MPaISO 5273D printed XZ / on edge at 235°C
 
1714  MPaISO 5273D printed ZX / upright at 235°C
Flexural modulus 6410  MPaISO 178Injection molded
Flexural strength 145  MPaISO 178Injection molded
Izod impact notched 12  MPaISO 180Injection molded
Charpy impact notched 12  MPaISO 179Injection molded
FLAMMABILITY PROPERTIES       
UL 94 flammability rating  V-0 at 0.4 mm  
UL 943D printed XY / flat at 235°C
   V-0 at 0.8 mm  
UL 94Injection molded
  V-0 at 0.8 mm  
UL 943D printed XY / flat at 235°C
  V-0 at 1.6 mm  
UL 94Injection molded
  V-0 at 3.2 mm  
UL 94Injection molded
THERMAL PROPERTIES       
Melting point   
 ISO 11357, DSCb 
Glass transition temperature   
°CISO 11357, DSCb 
Heat deflection temperature at 1.8 MPa (A) 160  °CISO 75Injection molded
  125  °CISO 753D printed XY / flat at 235°C
Heat deflection temperature at 0.45 MPa (B) 188  °CISO 75Injection molded
  173  °CISO 753D printed XY / flat at 235°C
GENERAL PROPERTIES       
Density 1328  kg/m3ISO 1183 
pH      1% in H2O
Water absorption 4  % ISO 6224 hours at 23°C
Water content - coulometric Karl Fischer
   μg/gISO 12937 
Water content 0.12  %
ISO 15512after drying at 120°C for 2 hours
non-volatile-matter content
   %ISO 3251 
a. Organic based color. b. DSC = Differential Scanning Calorimetry at 10°C/minute.

Note: results are generated according to the valid testing standards indicated above and the standard operating procedures used by the testing facilities.

Delivery Form
1.75 mm and 2.85 mm diameter 3D printer filament.

Packaging
1 kg and 5 kg spools of 3D printer filament. Custom sizes are available upon request.

Storage
Ideally store the 3D printer filament in a cool, dry place at temperatures between 5 to 25°C in a sealed container with the provided Clariant Desi Pak® desiccant bag. If the 3D printer filament has been exposed to moisture, please dry at 80°C for 3-4 hours with a vacuum or desiccant drying system if possible. Minimum shelf life is 1 year from the date of shipping when properly stored.
3D Printing
3D Printing
Contact

Request to Clariant

Related products

Request to Clariant

Please enter your contact information so we are able to process your request. Thank you for your interest.

3D Printing
3D Printing
Contact
Disclaimer:
This information corresponds to the present state of our knowledge and is intended as a general description of our products and their possible applications. Clariant makes no warranties, express or implied, as to the information’s accuracy, adequacy, sufficiency or freedom from defect and assumes no liability in connection with any use of this information. Any user of this product is responsible for determining the suitability of Clariant’s products for its particular application.<br />
<br />
* Nothing included in this information waives any of Clariant’s General Terms and Conditions of Sale, which control unless it agrees otherwise in writing. Any existing intellectual/industrial property rights must be observed. Due to possible changes in our products and applicable national and international regulations and laws, the status of our products could change. Material Safety Data Sheets providing safety precautions, that should be observed when handling or storing Clariant products, are available upon request and are provided in compliance with applicable law. You should obtain and review the applicable Material Safety Data Sheet information before handling any of these products. For additional information, please contact Clariant.<br />
<br />
* For sales to customers located within the United States and Canada the following applies in addition: No express or implied warranty is made of the merchantability, suitability, fitness for a particular purpose or otherwise of any product or service.<br />
<br />
© Trademark of Clariant registered in many countries.<br />
® 2019 Clariant International Ltd 

You are about to leave the Clariant domain

The link you activated will take you outside the Clariant site in about 10 seconds. If you want to stop this, press "Cancel".