Hostaperm Red D3G 71
Pigment Red 254

Hostaperm Red D3G 71

Pigment Red 254

Edition Date :
March 01, 2019
Hostaperm Red D3G 71 is a modified version with a highly efficient and widely compatible additive. Optimum tinting strength in solvent-borne systems can be achieved in relatively short time using a dissolver and suitable dispersing agents. The simplified dispersion process that does not include a bead mill results in a cost efficient manufacturing of paints.
Benefits
  • Very high weather fastness
  • High overspray fastness
  • High tinting strength and brilliance
  • Easily be dispersed with a dissolver
  •  

Application Profile
  • Industrial Coatings
  • Decorative Paints

Special Recommendations
Air-drying Alkyds
 
Physically Drying Paints
 
Baking Enamels
 
Acid Cured Paints
 
Amine Cured Epoxies
 
Isocyanate Cured Paints
 
Waterbased Paints
 

● recommended
○ limited suitability
-  not recommended

Physical Data
Density[g/cm3]1.60
Form of Supply
 powder
Specific surface
[m2/g]
27
Oil absorption
[ml/100g]64
Avg. Size of Primary Particles
[nm]
280
Heat Stability
[°C]
200

Fastness Data
   to Light
 to Weathering
  

12 month
24 month

 LOA
AMLOA
AM
LOA
AM
Full shade
 8
84-54-5--
Deep shade  ------
1/3 ST [1:5.5 TiO2]
8 844--
1/25 ST
[1:83 TiO2] 8844--

Acids
 5  
Water 5 
Butyl Glycol
 4-5  
Methyl Ethyl Ketone
 4-5  
Xylene 5  
Alkali 5  
Butanol 4-5  
Butyl Acetate
 5  
White Spirit
 5  
Dibutyl Phthalate
 4-5 
Blooming 5
 
Fastness to Overpainting 
NCAM (120°C)
AM (160°C)
 555

LOA- Air-drying Long Oil Alkyd
AM- Baked Alkyd-Melamine
NC- Nitrocellulose Combination Lacquer


Justin Seay
Justin Seay
Contact Person
+17043317204

Request to Clariant

Request to Clariant

Please enter your contact information so we are able to process your request. Thank you for your interest.

Justin Seay
Justin Seay
Contact Person
+17043317204
Disclaimer:
This information corresponds to the present state of our knowledge and is intended as a general description of our products and their possible applications. Clariant makes no warranties, express or implied, as to the information’s accuracy, adequacy, sufficiency or freedom from defect and assumes no liability in connection with any use of this information. Any user of this product is responsible for determining the suitability of Clariant’s products for its particular application.<br />
<br />
* Nothing included in this information waives any of Clariant’s General Terms and Conditions of Sale, which control unless it agrees otherwise in writing. Any existing intellectual/industrial property rights must be observed. Due to possible changes in our products and applicable national and international regulations and laws, the status of our products could change. Material Safety Data Sheets providing safety precautions, that should be observed when handling or storing Clariant products, are available upon request and are provided in compliance with applicable law. You should obtain and review the applicable Material Safety Data Sheet information before handling any of these products. For additional information, please contact Clariant.<br />
<br />
* For sales to customers located within the United States and Canada the following applies in addition: No express or implied warranty is made of the merchantability, suitability, fitness for a particular purpose or otherwise of any product or service.<br />
<br />
© Trademark of Clariant registered in many countries.<br />
® 2019 Clariant International Ltd 

You are about to leave the Clariant domain

The link you activated will take you outside the Clariant site in about 10 seconds. If you want to stop this, press "Cancel".