ESD safe PC+ABS
3D printer filament

ESD safe PC+ABS

3D printer filament

Edition Number :
20191106
Edition Date :
November 06, 2019
  • Print Temperature = 260-285°C
  • Print Speed = 20-60 mm/s
  • Bed Adhesion = PVP based glue or a polycarbonate/PC+ABS specific type commercial adhesive (e.g. Magigoo PC) on glass or carbon fiber
  • Bed Temperature = ideally heated up to 110°C (use an enclosed chamber if possible)
  • Fan Settings = off to low
  • Print recommendations = HIPS 3D printer filament is effective as a support material when printing PC+ABS

Note: parameters are dependent on printer used; Clariant tests were performed on an Ultimaker 3 extended, an Ultimaker S5 and a Bondtech modified Intamsys HT Pro printer.

Property Typical ValuesUnitsTest MethodTest Specimen
 ESD   
MECHANICAL PROPERTIES    
Tensile stress at yield, 50 mm/min MPaISO 527Injection molded
 57MPaISO 5273D printed XY / flat at 280°C
 60MPaISO 5273D printed XZ / on edge at 280°C
 --MPaISO 5273D printed ZX / upright at 280°C
Tensile stress at break, 50 mm/min
MPaISO 527Injection molded
 54MPaISO 5273D printed XY / flat at 280°C
 58MPaISO 5273D printed XZ / on edge at 280°C
 20MPaISO 5273D printed ZX / upright at 280°C
Tensile elongation at yield, 50 mm/min4.6%ISO 5273D printed XY / flat at 280°C
 4.3%ISO 5273D printed XZ / on edge at 280°C
 
%ISO 527

3D printed 

ZX / upright at 280°C

Tensile elongation at break, 50 mm/min %ISO 527Injection molded
 7.1%ISO 5273D printed XY / flat at 280°C
 4.5%ISO 5273D printed XZ / on edge at 280°C
 1.0%ISO 5273D printed ZX / upright at 280°C
Tensile modulus (modulus of elasticity), 1 mm/min MPaISO 527Injection molded

2484MPaISO 5273D printed XY / flat at 280°C
 2466MPaISO 5273D printed XZ / on edge at 280°C
 2088MPaISO 5273D printed ZX / upright at 280°C
Flexural modulus MPaISO 178Injection molded
 2309MPaISO 1783D printed ZX / upright at 280°C
Flexural strength MPaISO 178Injection molded
 86MPaISO 1783D printed ZX / upright at 280°C
Izod impact notched kJ/m2ISO 180Injection molded
Charpy impact notched kJ/m2ISO 179Injection molded
 11kJ/m2ISO 1793D printed XY / flat at 280°C
Charpy impact unnotched65kJ/m2ISO 1793D printed XY / flat at 280°C
ELECTRICAL PROPERTIES    
Volume resistivity9.9 x 1012ohms•cm Injection molded
 2 x 1011 - 5 x 1011ohms•cm 3D printed XY / flat at 260°C
Surface resistivity6 x 1012ohms/sq
 Injection molded
 2 x 109 - 9 x 109ohms/sq 3D printed XY / flat at 260°C
THERMAL PROPERTIES    
Melting point °CISO 11357, DSCb 
Glass transition temperature112, 141°CISO 11357, DSCb 
Heat deflection temperature at 1.8 MPa (A) °CISO 75Injection molded
 127°CISO 753D printed XY / flat at 280°C
Heat deflection temperature at 0.45 MPa (B) °CISO 75Injection molded
 133°CISO 753D printed XY / flat at 280°C
GENERAL PROPERTIES    
Density1163 kg/m3ISO 1183 
pH6.0  1% in H2O
Water absorption %ISO 6224 hours at 23°C
Water content - coulometric Karl Fischer< 100μg/gISO 12937after drying at 100°C for 4 hours
Water content %ISO 15512after drying at 120°C for 2 hours
non-volatile-matter content> 21%ISO 351 
     
a. Inorganic pigment based color. b. DSC = Differential Scanning Calorimetry at 10°C/minute.
Note: results are generated according to the valid testing standards indicated above and the standard operating procedures used by the testing facilities.
Delivery form
1.75 mm and 2.85 mm diameter 3D printer filament.

Packaging
1 kg and 5 kg spools of 3D printer filament. Custom sizes are available upon request.

Storage
Ideally store the 3D printer filament in a cool, dry place at temperatures between 5 to 25°C in a sealed container with the provided Clariant Desi Pak® desiccant bag. If the 3D printer filament has been exposed to moisture, please dry at 100-110°C for 3-4 hours with a vacuum or desiccant drying system if possible. Minimum shelf life is 1 year from the date of shipping when properly stored.
Documents
There are no documents available for this product.
Contact Us
Please contact us for safety and regulatory details or the Material Safety Data Sheet (MSDS).

Download File

Please enter your contact details and the file will start downloading immediately after your details have been submitted. This only has to be done for the first file you download on this site. Thank you for your understanding.

Personal Information

3D Printing
3D Printing
Contact

Request to Clariant

Related products

Request to Clariant

Please enter your contact information so we are able to process your request. Thank you for your interest.

3D Printing
3D Printing
Contact
Disclaimer:
This information corresponds to the present state of our knowledge and is intended as a general description of our products and their possible applications. Clariant makes no warranties, express or implied, as to the information’s accuracy, adequacy, sufficiency or freedom from defect and assumes no liability in connection with any use of this information. Any user of this product is responsible for determining the suitability of Clariant’s products for its particular application.<br />
<br />
* Nothing included in this information waives any of Clariant’s General Terms and Conditions of Sale, which control unless it agrees otherwise in writing. Any existing intellectual/industrial property rights must be observed. Due to possible changes in our products and applicable national and international regulations and laws, the status of our products could change. Material Safety Data Sheets providing safety precautions, that should be observed when handling or storing Clariant products, are available upon request and are provided in compliance with applicable law. You should obtain and review the applicable Material Safety Data Sheet information before handling any of these products. For additional information, please contact Clariant.<br />
<br />
* For sales to customers located within the United States and Canada the following applies in addition: No express or implied warranty is made of the merchantability, suitability, fitness for a particular purpose or otherwise of any product or service.<br />
<br />
© Trademark of Clariant registered in many countries.<br />
® 2019 Clariant International Ltd 

You are about to leave the Clariant domain

The link you activated will take you outside the Clariant site in about 10 seconds. If you want to stop this, press "Cancel".