PA6/66 FR Using Exolit®

Typical Property Values

Property	Typical Values				Units	Test Method	Test Specimen
	white	black	Catch me if you cana	natural
MECHANICAL PROPERTIES
Tensile stress at yield, 50 mm/min					MPa	ISO 527	Injection molded
	46	39	40	52	MPa	ISO 527	3D printed XY / flat at 250°C
	44	39	37	56	MPa	ISO 527	3D printed XZ / on edge at 250°C
	--	21	--	--	MPa	ISO 527	3D printed ZX / upright at 250°C
Tensile stress at break, 50 mm/min	48	56		37	MPa	ISO 527	Injection molded
	41	37	37	49	MPa	ISO 527	3D printed XY / flat at 250°C
	43	35	30	52	MPa	ISO 527	3D printed XZ / on edge at 250°C
	20	23	18	25	MPa	ISO 527	3D printed ZX / upright at 250°C
Tensile elongation at yield, 50 mm/min					%	ISO 527	Injection molded
	3.5	3.1	3.5	3.7	%	ISO 527	3D printed XY / flat at 250°C
	3.3	2.9	3.1	3.1	%	ISO 527	3D printed XZ / on edge at 250°C
	--	0.6	--	--	%	ISO 527	3D printed ZX / upright at 250°C
Tensile elongation at break, 50 mm/min	12	13		35	%	ISO 527	Injection molded
	12	12	17	6.9	%	ISO 527	3D printed XY / flat at 250°C
	4.5	9.3	8.1	4.5	%	ISO 527	3D printed XZ / on edge at 250°C
	1.1	0.8	1.4	1.3	%	ISO 527	3D printed ZX / upright at 240°C
Tensile modulus (modulus of elasticity), 1 mm/min					MPa	ISO 527	Injection molded
	2138	2345	2372	2803	MPa	ISO 527	3D printed XY / flat at 240-250°C
	2459	2041	2078	3010	MPa	ISO 527	3D printed XZ / on edge at 240-250°C
	2101	2602	1666	2389	MPa	ISO 527	3D printed ZX / upright at 240-250°C
Flexural modulus	2130	2370		1320	MPa	ISO 178	Injection molded
Flexural strength	67	83		46	MPa	ISO 178	Injection molded
Izod impact notched	6	5		7	MPa	ISO 180	Injection molded
Charpy impact notched	5	5		7	MPa	ISO 179	Injection molded
Charpy impact unnotched		28	27	27	kJ/m2	ISO 179	3D printed XY / flat at 250°C
FLAMMABILITY PROPERTIES
UL 94 flammability rating		V-0 at 0.8 mm				IEC 60695-11-10	Injection molded
		V-0 at 0.8 mm				IEC 60695-11-10	3D printed XY / flat at 240°C
	V-0 at 1.6 mm	V-0 at 1.6 mm				IEC 60695-11-10	Injection molded
		V-0 at 1.6 mm				IEC 60695-11-10	3D printed XY / flat at 240°C
	V-0 at 3.2 mm	V-0 at 3.2 mm		V-0 at 3.2 mm		IEC 60695-11-10	Injection molded
		V-0 at 2.0 mm				IEC 60695-11-10	Injection molded
THERMAL PROPERTIES
Melting point	197	197	194	191		ISO 11357, DSCb
Glass transition temperature	--	--	--	--	°C	ISO 11357, DSCb
Heat deflection temperature at 1.8 MPa (A)	57	56		58	°C	ISO 75	Injection molded
	73	61	64	67	°C	ISO 75	3D printed XY / flat at 250°C
Heat deflection temperature at 0.45 MPa (B)	143	140		142	°C	ISO 75	Injection molded
	151	141	133	148	°C	ISO 75	3D printed XY / flat at 250°C
GENERAL PROPERTIES
Density	1169	1169	1117	1159	kg/m3	ISO 1183
Volume	4.16	4.16	4.33	4.29	cm3	ISO 1183
pH	4.7	4.7	4.6	4.7			1% in H2O
Water absorption	8.2	5.2		5.4	%	ISO 62	24 hours at 23°C
Water content - coulometric Karl Fischer				220	μg/g	ISO 12937
Water content	0.08	0.07		0.08	%	ISO 15512	after drying at 120°C for 2 hours
non-volatile-matter content	~9	~11	~10	~7	%	ISO 3251

Packaging and Handling

Delivery Form
1.75 mm and 2.85 mm diameter 3D printer filament.

Packaging
1 kg and 5 kg spools of 3D printer filament. Custom sizes are available upon request.

Storage
Ideally store the 3D printer filament in a cool, dry place at temperatures between 5 to 25°C in a sealed container with the provided Clariant Desi Pak^® desiccant bag. If the 3D printer filament has been exposed to moisture, please dry at 80°C for 3-4 hours with a vacuum or desiccant drying system if possible. Minimum shelf life is 1 year from the date of shipping when properly stored.