Packages & concentrates

Emulsogen™ 3971 N is an emulsifier package with good corrosion protecting properties for milky, opaque and transparent metal working fluids and fire resistant hydraulic fluids. Emulsogen™ 3971 N is dispersible in water and in mineral oil. Mineral oil based formulations show no gelation tendency, form spontaneously emulsions and are stable in hard water.

Emulsogen™ ENF is a nonylphenol-free ready-to use package for de-watering fluids, providing wetting agent and corrosion inhibiting properties to the formulation.A special drying process used in metalworking consists in briefly immersing the metal parts in solvents such as white spirit, kerosene or similar hydrocarbons. The rapid separation of the water from the metal surface is effected by a wetting agent. Selected corrosion inhibitors in the wetting agent impart adequate temporary corrosion protection to the metal parts under normal temperature and humidity conditions. The corrosion protection depends on storage and environmental conditions.Emulsogen™ ENF is tailor-made for this application. It is used at a concentration of only 0.6-1.2%. The water adhering to the metal surface is displaced within a few seconds when metal parts are dipped in the dewatering fluid. The metal parts are then effectivly protected against corrosion during storage.

Emulsogen™ T is a emulsifier package for metal working emulsions based on vegetable oils. Emulsogen™ T is tailored for optimum emulsification of most triglycerides.

Hostacor™ IT is a pre-neutralized, low foaming corrosion inhibitor mainly used in cutting & grinding fluids, in rolling emulsions and water-based hydraulic fluids (HFA-E, HFA-S). Hostacor™ IT is an excellent corrosion inhibitor for steel and shows very good hard water stability. It can be used alone or in combination with other water-soluble corrosion inhibitors or lubricants.