Dispersogen PL 30
Dispersogen PL 30 is a nonionic, polymeric dispersing agent for water-based pigment preparations, suitable for organic pigments and specialty carbon blacks.
The product is recommended for use in concentrates for in-plant tinting. The general dosage recommendation is 10 - 40% on organic pigments.
Dispersogen PL 30 also acts as wetting agent/compatibilizer in waterborne high PVC paints as well as in waterborne and solvent-borne low PVC lacquers. The general dosage is 0.5-1.0% in emulsion paints, 1.0-1.5% in acrylic lacquers and 0.25-0.5% in alkyd lacquers.
Informations sur le produit
The advantages of Dispersogen PL 30 are:
- low VOC
- hazard label free
- free of alkylphenol ethoxylates
- high pigment concentration
- low foaming
- Wetting & dispersing agent
- Polymer
- Pigment preparation
- Waterborne paints
- Solventborne paints
- Decorative paints
- Wetting
- Compatibilizing
- Dispersing
| Composition: | graft copolymer |
| Active content: | approx. 100% |
| Ionicity: | nonionic |
| Appearance: | viscous, cloudy liquid |
| pH value, 5% in water: | 6-7 |
| Solubility: | soluble in water at 500 g/l |
| Density: | approx. 1.08 g/cm3 |
| Melting point: | approx. 5 °C |
| Viscosity: | approx. 11000 mPas |
Use as wetting agent/compatibilizer:
•Waterborne emulsion paints (high PVC)
•Waterborne acrylic lacquer (low PVC)
•Solventborne alkyd lacquer (low PVC)
Use as dispersing agent:
Application area
•Concentrates for in-plant tinting
End-use systems
•Water-based end-use systems
Pigment applicability
•Organic pigments
•Specialty carbon blacks (such as Printex 85, 300, V/U and Color Black FW 171 from Orion Engineered Carbons)
