Product Redirector

ActiSorb™ Hg 2 is a sulfur-based adsorbent developed for the removal of trace quantities of mercury contaminants from all types of feed in gas processing. The powerful adsorbent is capable of reducing mercury to non-detectable levels.

ActiSorb™ S 3 is a highly effective zinc oxide-based adsorbent designed for the removal of sulfur components, such as hydrogen sulfide, mercaptans and COS, from hydrocarbon feed streams. It is recommended for applications with standard space velocities and relatively high inlet sulfur concentrations.

ActiSorb™ S6 is a copper-promoted zinc oxide adsorbent for deep desulfurization of hydrocarbon feed streams, especially upstream of a pre-reformer. It is typically placed in the bottom of the standard zinc-oxide reactor and removes the remaining hydrogen sulfide (H2S) to a value of less than 10 ppb.

ActiSorb™ Hg 5 is a silver-based adsorbent designed for extremely effective mercury removal in the purification of all types of hydrocarbon feedstocks. Thanks to its high capacity, the adsorbent is capable of reducing mercury to non-detectable levels.

ActiSorb™ S 2 is a highly effective zinc oxide-based adsorbent designed for the removal of sulfur components, such as hydrogen sulfide, mercaptans and COS, from hydrocarbon feed streams. The adsorbent is specially recommended when operating at high space velocities and elevated temperatures.

ActiSorb™ GP 402 is an economical, reliable solution for the removal of mercury in a wide range of gas-phase applications for natural gas purification. The sulfur-impregnated carbon-based adsorbent features a closely controlled surface area and pore volume, resulting in high mercury adsorption.

Dispersogen C 4020 is a dispersing agent for inorganic pigments like titanium dioxide, calcium carbonate, talcum, China clay, iron oxide pigments, gypsum, cement and many others.

Clariant Oil Services’ ICETREAT flow assurance technologies offer specially-formulated solutions that prevent blockages formed by water and hydrates in gas wells and gas flow lines.

Clariant Oil Services’ WAXTREAT paraffin control technologies were designed to prevent and treat paraffin build-up in order to improve flow and increase production.

Clariant Oil Services’ line of defoamers and anti-foam technologies provides foam management products for both oil- and aqueous-based fluids.

Clariant Oil Services’ FLOTREAT range of downhole treatments removes and prevents asphaltene deposits and resolves emulsions that have formed in the near-wellbore.

O mais alto padrão de eficiência e sustentabilidade na purificação de óleos comestíveis, gorduras e biocombustíveis: TONSIL® da Clariant Functional Minerals.As argilas clarificantes TONSIL® da Clariant, altamente eficientes contra impurezas, odores e sabores indesejáveis em óleos e gorduras sem refino, já são utilizadas há mais de 100 anos.Para atender à crescente demanda e assegurar soluções certificadas para o leque de aplicações do cliente, continuamos investindo em pesquisa e desenvolvimento de novos produtos e na otimização, de forma rápida e flexível, das qualidades do TONSIL® na Europa, Américas e Ásia. Em muitos países, o TONSIL® já se tornou sinônimo de argilas clarificantes que, a nosso ver, representa um desafio e um compromisso com o futuro. Para mais detalhes, assista ao nosso vídeo.As argilas clarificantes TONSIL® da Clariant, altamente eficientes contra impurezas, odores e sabores indesejáveis em óleos e gorduras sem refino, já são utilizadas há mais de 100 anos.

Diethylen glycol dibutyl ether is an inert solvent especially well suited for chemical synthesis.

Hostavin 3051 P is a non-substituted hindered amine light stabilizer (HALS) powder, with enhanced tribo effect for powder coating applications. It also offers good solubility and broad compatibility in all kind of solventborne paint systems.

Hostavin 3051-2 DISP is a 52% aqueous dispersion of a low molecular weight hindered amine light stabilizer (HALS). It is characterized by its easy incorporation, low volatility and broad compatibility with a wide range of waterborne coating systems.

Hostavin 3058 LIQ is a liquid, non-basic and low molecular weight hindered amine light stabilizer (HALS) designed for high performance solventborne clearcoats requiring exterior durability and ideally suited for acid-catalyzed and oxidative systems.

Hostavin 3053 is the 80% solution of a low molecular weight hindered amine light stabilizer (HALS) in xylene. It is characterized by its excellent solubility, broad compatibility, extremely low volatility and migration stability.

Hostavin 3206 is a highly effective, oxalanilide based, liquid UV-B absorber. It is characterized by its excellent compatibility in all solventborne coatings, with an improved resistance to migration and low volatility, under normal stoving conditions as well as low color in wet-paint.

Hycite 713 is an inorganic multifunctional additive specifically tailored for use in polyolefins.

Hostavin N 392 micro powder is a mixture of the oligomeric HALS Hostavin N 30 and a wax to improve distribution of the product in the resin. The fine particle size of Hostavin N 392 micro powder in combination with a carefully selected wax leads to a significant improvement in the distribution of the light stabilizer in the resin even in applications without strong mechanical mixing efforts like rotomoulding or sintering.

Hostavin PR-25 granules is an efficient UV-B absorber for coatings and plastic materials.

Hostavin 3212 liq is a 2:1 synergistic mixture of an oxalanilide based UV absorber with a low molecular weight HALS.

Hostapon SCI-85 C is a mild, high-foaming, anionic surfactant suited for use in syndet bars. It is very mild to the skin and eyes and provides a rich and abundant lather with no soap scum due to its hard water tolerance. This product imparts a luxurious, silky skin after-feel and is very easy to handle and use. Product is supplied as flakes.

Genapol TS Powder has a brilliant pearl lustre effect. It is compatible with anionic, nonionic and amphoteric surfactants. The foaming behavior of surfactants is not effected.

Hostapon SCI-85 G is a mild, high-foaming, anionic surfactant suited for use in syndet bars. It is very mild to the skin and eyes and provides a rich and abundant lather with no soap scum due to its hard water tolerance. This product imparts a luxurious, silky skin after-feel and is very easy to handle and use. Product is supplied as granules.

Hostapon SCI 65 C is a mild, anionic surfactant, which gives a good foam structure and resistance to hard water. Primarily used in syndet bars.

Hostapon SCI-85 P is a mild, high-foaming, anionic surfactant suited for use in syndet bars. It is very mild to the skin and eyes and provides a rich and abundant lather with no soap scum due to its hard water tolerance. This product imparts a luxurious, silky skin after-feel and is very easy to handle and use. Product is supplied as powder.

Hordaphos MDGB is an effective corrosion inhibitor for acidic aqueous systems, e.g. for cleaners for the food processing industry. It is a clear, colorless to yellowish liquid with an ester-like odor. The product is not in all ratios clearly soluble in water.For more details see our Video about Hordaphos.

Hordaphos MDB is a multi-functional additive which can be used in various applications, especially in printing inks, paints and coatings. It is a clear, colourless to yellowish liquid with an ester-like odour. For more details see our Video about Hordaphos.

Polyglykol D21/220 is a polyalkylene glycol (PAG) to be used as synthetic base fluid in high performance lubricants with low friction coefficients, excellent wear properties and good thermal stability.

Hostapur DTC Hi Conc is an ether carboxylic acid with excellent emulsification and dispersing properties. It is used for metal working fluids, fire resistant hydraulic fluids (HFA-S) and rolling emulsions. The product is extremely stable against electrolyte and hard water. Furthermore Hostapur DTC Hi Conc shows outstanding lime soap dispersing power, being able to disperse large quantities of calcium oleate or tallate.

HYDEX™ E is an economical distillate dewaxing and isomerization catalyst for highly paraffinic feedstocks in winter diesel. The distillate upgrading catalyst minimizes naphtha production, while allowing improved product swelling and cetane numbers, and enhancing cold flow in the diesel boiling range.

HYDEX™ L is a distillate upgrading catalyst used for hydro-dewaxing. The zeolite-based catalyst selectively hydrocracks waxy molecules to short chain products while leaving valuable properties of lube oil unchanged, and thus helping producers meet critical specifications.

Mordenite (MOR) zeolites are widely used in emission control for industrial off-gas purification and VOC reduction. As process catalysts, these zeolites suit a variety of applications, such as fuel upgrading, production of petrochemical intermediates, processing of chemicals, and isomerization of alkanes and aromatics. Clariant's standard powders with Mordenite (MOR) structures are: NaCZM 16, CZM 20 and CZM 40.

Our Chabazite (CHA) structured zeotypes are primarily used for automotive emission control, as well as in chemical processes such as conversion of methanol to olefins. The zeolites are also suitable for adsorption purposes, including hydrocarbon adsorption heat management, and active carbon replacement. Clariant’s innovative zeolite powder with the Chabazite structure type is CZC (TiAPSO-34).

The KA series consists of highly specific mesoporous alumosilicates which offer superior mechanical and chemical stability. Thus, they are ideal for use as catalysts and carriers in demanding reaction media, such as in hydrothermal, hydration, oxidation or alkylation reactions.

SynDane™ catalysts enable cost-efficient production of maleic anhydride via partial oxidation of n-butane in fixed-bed tubular reactors. Their superior yield and selectivity greatly reduce by-product formation and downstream polymerization, thus minimizing downtime of maleic anhydride plants.

Beta structured zeolites are widely used for automotive emission control, industrial off-gas purification, and reduction of VOC, NOx and N2O. As process catalysts, they are ideal for fuel upgrading, production of petrochemical intermediates, and processing chemicals. The zeolites are also suitable for adsorption purposes, such as odor removal and active carbon replacement. Clariant's standard zeolite powders with the Beta structure type are CZB 25 (BEA 25), CZB 30 (BEA 30), and CZB 150 (BEA 150).

HyFlex™ is a broad range of precious-metal and base-metal catalysts for various hydrogenation reactions, such as production of amines or oxo-alcohol, and high-temperature dehydrogenation of cyclohexanol. They also offer optimal hydrogenation for resin production when combined with NiSat™ catalysts.

HYSOPAR™ 8000 is a distillate upgrading catalyst for isomerization of C7+ feedstocks with high aromatics and naphthenics content, enabling economical enhancement of fuel properties such as knock resistance, cold flow and vapor pressure. It is optimized for upgrading specialty lubricants and solvents.

FAMAX™ DS is a specially shaped catalyst for methanol to formaldehyde oxidation with superior productivity and profitability. Engravings, on the top and bottom surfaces of the catalyst ring, generate a free path for gas flow. Thus, the pressure drop is reduced significantly.

FAMAX™ catalysts are used for partial oxidation of methanol to formaldehyde in fixed-bed tubular reactors. A broad portfolio of different catalyst types and shapes offer optimum solutions for all plant technologies and operating conditions. FAMAX catalysts are designed with a multi-layer approach tailored to the individual plant conditions. This ensures optimal catalyst activity and maximizes production performance and lifetime of the catalyst.

HDMax™ 520 is a distillate upgrading catalyst for hydrofinishing reactions aimed at removing chemically active compounds which affect the color and color stability. Due to its special macroporous structure and acidic properties, HDMax 520 produces water-clear white oils.

COD 900 is a zeolite-based catalyst developed for the conversion of olefins to diesel (COD) and gasoline. COD 900 is a proven, cost-effective solution for producing high-quality synthetic diesel from olefins, delivering products with high cetane numbers and low aromatics content.

JMAC LP 10 is a preservative active with antimicrobial properties that reduces the spread of bacteria over the long term. The attractiveness of JMAC’s antimicrobial protection is reinforced by its low toxicity, non-sensitizing performance and very low environmental impact. JMAC meets Ecolabel standards for use in paints and coatings. JMAC is also suitable for home care applications.

Binder for dishwashing and laundry tabs and multi-phase products.

Binder for dishwashing and laundry tabs and multi-phase products.

Low VOC solvent and hydrotrope for liquid laundry detergents.

Emollient for the formulation of personal care products such as creams and lotions. Solubilizer for aqueous formulations as well as dispersing agent in a wide range of formulations.

Hostagliss PA 165 is a polar polymer with multiple functional groups, exhibiting a high affinity to metal surfaces. Despite its fully saturated structure (contains no unsaturated C=C bonds) it remains liquid and pourable down to temperatures of less than -20°C. Hostagliss PA 165 has good lubricity and anti-wear properties. Therefore, it is used as a component for non-water miscible metal working fluids, such as cutting- or deep drawing oils. Other applications are gear/engine oils and greases. Hostagliss PA 165 can also be used as an additive for emulsifiable metal working fluids to improve anti wear properties.

Genapol EP 0244 is a low foam, nonionic, alkoxylated alcohol with hard water stability. Its excellent emulsifying and degreasing properties make it suitable for spray, immersion, and ultrasonic cleaning applications. Good compatibility with aqueous acids and bases makes it stable in a range of formulation types.

Genapol BA 040 is a low foam, nonionic alkoxylated alcohol with excellent emulsifying and oil rejection properties making it suitable for spray cleaning applications. Good compatibility with aqueous acids and bases makes it stable in a range of formulation types.

Polyglykol 6000 S is a polethylene glycol with a mean molecular weight of 6000. It is a solid in flake form.

Polyglykol 6000 P is a polyethylene glycol with a mean molecular weight of 6000. It is a solid in powder form.

Polyglykol 6000 PF is a polethylene glycol with a mean molecular weight of 6000. It is a solid in fine powder form.

POLYGLYKOL E01 P is a readily biodegradable polyalkylene glycol (PAG) to be used as synthetic base fluid for high performance electric car gear lubricants with high viscosity index, excellent wear properties and good thermal stability.

Genapol PN 30 is a EO/PO block copolymer resistant against water hardness, metal salts, acids and alkalis in practice-orientated concentrations. As non-ionic surfactant it can be used in combination with other non-ionic compounds and with anionic and cationic substances. Because of its interfacial activity and low foaming behaviour Genapol PN 30 is especially suitable for the manufacture of low foaming cleaners.

Genapol PF 40 is used as nonionic emulsifier for the emulsion polymerization of monomers like acrylates, styrene-acrylates and vinyl acetate.

Genapol PF 80 FP is a EO/PO block polymer. It enhances the workability, penetration and binding power of concretes/mortars to surfaces.

POLYGLYKOL E03 A is a readily biodegradable polyalkylene glycol (PAG) to be used as synthetic base fluid for high performance electric car gear lubricants with high viscosity index, excellent wear properties and good thermal stability.

POLYGLYKOL E02 A is a polyalkylene glycol (PAG) to be used as synthetic base fluid for high performance electric car gear lubricants with high viscosity index, excellent wear properties and good thermal stability.

POLYGLYKOL E04 E is a readily biodegradable polyalkylene glycol (PAG) to be used as synthetic base fluid for high performance electric car gear lubricants with high viscosity index, excellent wear properties and good thermal stability.

Hostavin 3130 LIQ is a benzotriazole UV absorber characterized by its excellent compatibility and high efficiency in solventborne and waterborne paints and coatings.

Hostavin 3400 LIQ is a high performance triazine-based UV absorber, offering superior light stabilization versus standard solutions. It is recommended for solventborne coatings systems requiring long-lasting outdoor durability.

Polyphosphoric acids are odourless, high viscousity liquids with strong hygroscopic properties. Phosphoric acids with < 95% H3PO4 (68% P2O5) contain the simple orthophosphoric acid. At higher concentrations the acid consists of a mixture of ortho, pyro, tri, tetra and highly condensed phosphoric acids. For this reason acids with a concentration > 68% P2O5 are commonly known as polyphosphoric acids. Polyphosphoric acids are miscible with water, hydrolysing to orthophosphoric acid with the generation of heat. They are insoluble in hydrocarbons and halogenated hydrocarbons.

Polyphosphoric acids are odourless, high viscousity liquids with strong hygroscopic properties. Phosphoric acids with < 95% H3PO4 (68% P2O5) contain the simple orthophosphoric acid. At higher concentrations the acid consists of a mixture of ortho, pyro, tri, tetra and highly condensed phosphoric acids. For this reason acids with a concentration > 68% P2O5 are commonly known as polyphosphoric acids. Polyphosphoric acids are miscible with water, hydrolysing to orthophosphoric acid with the generation of heat. They are insoluble in hydrocarbons and halogenated hydrocarbons.

Hostavin 3292 LIQ is a 100% liquid low molecular weight hindered amine light stabilizer (HALS). It is a basic HALS characterized by its good solubility, broad compatibility and good stabilization efficiency in a wide range of coating systems.

Safebrake DOT 4 is the economic brake fluid and fulfills standard DOT4 brake fluid requirements.

Nipahex DHC is a antiseptic / bactericide widely used in several applications. In cosmetics and personal care products, Nipahex DHC is used in the formulation of eye makeup, makeup foundations, mouthwashes, hair dyes and bleaches, and other skin care and hair care products

Nipahex G is a antiseptic / bactericide widely used in several applications. In cosmetics and personal care products, Nipahex G is used in the formulation of eye makeup, makeup foundations, mouthwashes, hair dyes and bleaches, and other skin care and hair care products

Hostapon SLI 80C is a high foaming, mild surfactant that provides a dense, creamy lather to formulations. Hostapon SLI is nearly salt-free and resistant to hard and salt water with high foaming properties. It is compatible with soap and gives excellent lime-soap dispersibility in order to retard the formation of scum in bar soaps.

Polyglykol 400 is a non-volatile humectant, solubilizer, moisturizer, antistatic agent and fixative. It offers softening, cleansing and non-irritating properties. It provides low toxicity and hygroscopic effect. It can be used in creams and all preparations that tend to dry out. It also acts as a cleansing agent in face lotions and as non-greasy lubricant and perfume stabilizer in after-shave lotions. It can be used in lipsticks as solubilizers for tetrabromo fluorescein and its derivatives and in hair care products where improves the consistency of non-greasy hair care products which can be washed out with clear water. It counteracts the tendency of these products to dry to a brittle film. It has very low water content, good biodegradability and is compatible with hard water. Polyglykol 400 is also used in hair styling products as a plasticizer and anti-static agent. It is also applicable in toothpaste where it improves consistency and storage stability

Licolub PED 2001 powder is an oxidized, high density polyehtylene wax with high molecular weight and high viscosity.

Hostagel AV is the perfect thickener for colorants, wood stains and specialty coatings to prevent sedimentation of pigments and fillers.

Genapol 2222 is a low foam, nonionic, alkoxylated alcohol with excellent emulsifying properties making it suitable for spray, immersion, and ultrasonic cleaning applications. Good compatibility with aqueous bases makes it stable in high caustic-loading formulations.

Genapol EP 2454 is a low foam, nonionic, alkoxylated alcohol with excellent wetting and rinsing properties making it suitable for spray, immersion, and ultrasonic cleaning applications. Good compatibility with aqueous acids makes it stable in low pH and cationic formulations.

Genapol EP 2465 is a low foam, nonionic, alkoxylated alcohol with excellent degreasing and wetting properties making it suitable for spray, immersion, and ultrasonic cleaning applications. Good compatibility with aqueous acids makes it stable in low pH and cationic formulations.

Genapol 1261 is a nonionic, alkoxylated alcohol with excellent emulsifying and degreasing properties making it suitable for immersion and ultrasonic cleaning applications. Good compatibility with aqueous acids and bases makes it stable in a range of formulation types.

Genapol 1585 is a low foam, nonionic, alkoxylated alcohol with excellent emulsifying properties making it suitable for spray, immersion, and ultrasonic cleaning applications. Good compatibility with aqueous acids and bases makes it stable in a range of formulation types.

Genapol UD 110 is a nonionic, ethoxylated alcohol with excellent degreasing properties making it suitable for immersion and ultrasonic cleaning applications. Good compatibility with aqueous acids and bases makes it stable in a range of formulation types.

Genapol X 120 is a nonionic, ethoxylated alcohol with excellent degreasing properties making it suitable for immersion and ultrasonic cleaning applications. Good compatibility with aqueous bases, such as NaOH, makes it stable in high caustic-loading formulations.

AddWorks LXR 568 MP CN is a highly efficient phosphorous based processing stabilizer solution, which reduces the thermo-oxidative degradation of polymers and the development of undesired color (yellowing). AddWorks LXR 568 MP CN shows enhanced hydrolytic stability, a high thermal stability and high solubility in polymeric materials. It has a broad compatibility in coating polymers.

Genapol EP 2556 is a low foam, nonionic, alkoxylated alcohol with excellent degreasing and emulsification properties making it suitable for spray, immersion, and ultrasonic cleaning applications. Good compatibility with aqueous acids makes it stable in low pH and cationic formulations.

Genapol EP 2484 is a low foam, nonionic, alkoxylated alcohol with hard water stability. Its excellent emulsifying and degreasing properties make it suitable for spray, immersion, and ultrasonic cleaning applications. Good compatibility with aqueous acids and bases makes it stable in a range of formulation types.

Genapol EP 6205 is a low foam, nonionic, alkoxylated alcohol with excellent degreasing and good oil rejection properties making it suitable for spray, immersion, and ultrasonic cleaning applications. A high cloud point gives added formulation flexibility.

Genapol FA 5100 is a low foam, nonionic, alkoxylated alcohol with excellent oil rejection properties making it suitable for spray cleaning applications. Good compatibility with aqueous acids and bases makes it stable in a range of formulation types.

Genapol G 260 is a low foam, nonionic, ethoxylated alcohol with excellent oil rejection properties making it suitable for spray cleaning applications. Good compatibility with aqueous bases makes it stable in high caustic-loading formulations.

Genapol UD 030 is a low foam, nonionic, ethoxylated alcohol surfactant and solubilizer. Its excellent degreasing and good oil rejection properties make it suitable for spray, immersion, and ultrasonic cleaning applications. Good compatibility with aqueous bases makes it stable in high caustic-loading formulations.

Genapol X 078 is a nonionic, ethoxylated alcohol with excellent emulsifying and degreasing properties making it suitable for immersion and ultrasonic cleaning applications. Good compatibility with aqueous acids and bases makes it stable in a range of formulation types, while a high cloud point further increases formulation flexibility.

Exolit OP 1230 Terra is a white, fine-grained powder based on an organic phosphinate. The product is non-hygroscopic and it is insoluble in water and organic solvents. Clariant’s Exolit OP flame retardants for polyamides are all based on aluminum diethyl-phosphinate (= DEPAL). The pure substance DEPAL is sold as Exolit OP 1230 and in combination with synergists as Exolit OP 13xx & Exolit OP 14xx types. Exolit OP 1230 is the first non-halogenated flame retardant which can withstand the demanding requirements of this high end segment of engineering plastics. Exolit OP 1230 Terra is chemicially and from its composition equivalent to Exolit OP 1230, but comes with a mass balance certificate as for its production, renewable based Ethylene was sourced. Therefore we assume that for Exolit OP Terra products no additional performance testing and qualification compared to the standard grade are necessary. For more details see our Innovation Spotlight video.

Genapol EP 2464 is a low foam, nonionic, alkoxylated alcohol with hard water stability. Its excellent emulsifying and degreasing properties make it suitable for spray, immersion, and ultrasonic cleaning applications. Good compatibility with aqueous acids and bases makes it stable in a range of formulation types.

Genapol 9106 is a nonionic, ethoxylated alcohol with excellent emulsifying and degreasing properties making it suitable for immersion and ultrasonic cleaning applications. Good compatibility with aqueous acids and bases makes it stable in a range of formulation types, while a high cloud point further increases formulation flexibility.

Genapol UD 079 is a nonionic, ethoxylated alcohol with hard water stability. Its excellent emulsifying and degreasing properties make it suitable for immersion and ultrasonic cleaning applications. Good compatibility with aqueous acids and bases makes it stable in a range of formulation types.

Genapol UD 050 is a nonionic, ethoxylated alcohol with excellent degreasing and good oil rejection properties making it suitable for immersion and ultrasonic cleaning applications. Good compatibility with aqueous bases makes it stable in high caustic-loading formulations.

Genapol ID 060 is a nonionic, ethoxylated alcohol with excellent emulsifying and degreasing properties making it suitable for immersion and ultrasonic cleaning applications. Good compatibility with aqueous acids and bases makes it stable in a range of formulation types, while a high cloud point further increases formulation flexibility.

Genapol LA 050 is a nonionic, ethoxylated alcohol surfactant and solubilizer. Its excellent emulsifying and degreasing properties make it suitable for immersion and ultrasonic cleaning applications. Good hard water stability and cold-processability provide formulation flexibility.

Genapol EP 2424 is a low foam, nonionic, alkoxylated alcohol with excellent oil rejection and wetting properties making it suitable for spray, immersion, and ultrasonic cleaning applications. Good compatibility with aqueous bases makes it stable in high caustic-loading formulations.

Genapol O 080 is a low foam, nonionic, ethoxylated alcohol with excellent degreasing and good oil rejection properties making it suitable for spray, immersion, and ultrasonic cleaning applications. Good compatibility with aqueous bases makes it stable in high caustic-loading formulations.

Exolit OP 1240 Terra is a flame retardant based on an organic aluminum phosphinate which is a thermally stable white solid without any hazard classification or labeling. It can be easily compounded into polyesters and subsequently processed again to manufacture flame retarded parts used in consumer or industrial products. The product is non-hygroscopic and it is insoluble in water and organic solvents. Exolit OP 1240 Terra is chemicially and from its composition equivalent to Exolit OP 1240 but comes with a mass balance certificate as for its production, renewable based Ethylene was sourced. Therefore, we assume that for Exolit OP Terra products no additional performance testing and qualification compared to the standard grade are necessary. For more details see our Innovation Spotlight video.

Genapol 1424 is a low foam, nonionic, alkoxylated alcohol with hard water stability. Its excellent emulsifying and degreasing properties make it suitable for spray, immersion, and ultrasonic cleaning applications. Good compatibility with aqueous acids and bases makes it stable in a range of formulation types.

Genapol UD 080 is a nonionic, ethoxylated alcohol with excellent emulsifying and degreasing properties making it suitable for immersion and ultrasonic cleaning applications. Good compatibility with aqueous acids and bases makes it stable in a range of formulation types.

Genapol UD 070 is a nonionic, ethoxylated alcohol with excellent emulsifying and degreasing properties making it suitable for immersion and ultrasonic cleaning applications. Good compatibility with aqueous acids and bases makes it stable in a range of formulation types.

Genapol X 060 is a nonionic, ethoxylated alcohol with excellent degreasing properties making it suitable for immersion and ultrasonic cleaning applications. Good compatibility with aqueous bases makes it stable in high caustic-loading formulations.

The new Hostaphat 1738 phosphate ester exhibits an excellent low foam profile and strong emulsification properties offering outstanding performance and superior sustainability in metal working fluid formulations. This, along with excellent Extreme Pressure (EP)/Anti-wear (AW) properties makes this multifunctional product an ideal choice to formulate with in semi-synthetic and synthetic fluids.

Genapol Complete is a special low foaming rinse surfactant for multifunctional automatic dishwashing detergents (ADD) with an excellent sustainability profile. It is especially suitable for tabs or powders. Genapol Complete ensures brilliant rinse results for streak-free and spotless dishware and very good drying performance. It allows rinse and drying performance comparable to the best-in-class alternatives but without the fatty residues often seen with those products.

D-FOAM-R B2552 is a 100% synthetic base, silicone free foam control additive. It is used to provide rapid air release in a wide range of construction materials including mortar mixes, self leveling cements, plaster and polymer modified concrete. D-FOAM-R B2552 is compatible and can be mixed with PCE-Superplasticizers to prevent entrapped air formation.

Calsogen™ EH is a versatile anionic emulsifier based on branched CaDDBS in an aromatic-free 2-ethylhexanol with a high flash pointt for safer handling. It is used in different agrochemical formulation types and especially recommended for ECs.

Calsogen™ AR 100 ND is a versatile anionic emulsifier based on branched CaDDBS in a naphthalene depleted aromatic solvent with a high flash point for safer handling. It is used in different agrochemical formulation types and especially recommended for ECs.

D-FOAM-R B075 is an economical, silicone free, dry defoamer formulated to provide rapid air release in a wide range of construction materials including mortar mixes, self leveling cements, plaster and polymer modified concrete. D-FOAM-R B075 provides excellent entrained air control with polyvinyl alcohol, PVA and EVA containing blends.

D-FOAM-R B2525 is a 100% synthetic base, silicone free foam control additive. It is used to provide rapid air release in a wide range of construction materials including mortar mixes, self leveling cements, plaster and polymer modified concrete. D-FOAM-R B2525 is compatible and can be mixed with PCE-Superplasticizers to prevent entrapped air formation

Calsogen™ 4814 is a versatile anionic emulsifier based on the more biodegradable linear CaDDBS in an aromatic-free 2-ethylhexanol with a high flash pointt for safer handling. It is used in different agrochemical formulation types and especially recommended for ECs.

Calsogen™ ARL 100 ND is a versatile anionic emulsifier based on the more biodegradable linear CaDDBS in a naphthalene depleted aromatic solvent with a high flash point for safer handling. It is used in different agrochemical formulation types and especially recommended for ECs.

Dispersogen 2774 is a nonionic, polymeric dispersing agent for water-based pigment preparations, suitable for organic pigments and carbon black. Dispersogen 2774 is especially recommended for use in concentrates for in-plant tinting. The general dosage recommendation is 10-40% on organic pigments.

Dispersogen AN 100 is a surfactant-based dispersing agent for water-based and solvent based pigment preparations, suitable for inorganic and organic pigments and carbon blacks. Dispersogen AN 100 is a 3 – in – 1 product with nonionic and anionic surface active components and a polyglycol as humectant. Dispersogen AN 100 is especially recommended for use in point-of-sales colorants and concentrates for in-plant tinting. The general dosage recommendation is 20- 50 % on inorganic pigments and 5-20% on organic pigments.

Dispersogen 1728 is an anionic, polymeric dispersing agent for water-based pigment preparations, suitable for organic pigments and carbon blacks.Dispersogen 1728 is especially recommended for use in concentrates for in-plant tinting. The general dosage recommendation is 12-50% on organic pigments.

Dispersogen LFH is an anionic, surfactant-based dispersing agent for water-based pigment preparations, suitable for inorganic and organic pigments and carbon blacks.Dispersogen LFH is recommended for use in point-of-sales colorants and concentrates for in-plant tinting, in combination with a nonionic dispersing agent such as Dispersogen MT 200. The general dosage recommendation is 4-20% on organic pigments and 1-6% on inorganic pigments.

Dispersogen PCE is an anionic, polymeric dispersing agent for water-based pigment preparations, suitable for inorganic pigments.Dispersogen PCE is recommended for in-plant tinting systems. The general dosage recommendation is 5 - 25% on inorganic pigments.

Dispersogen FA is a nonionic, surfactant based dispersing agent for water-based and solvent based pigment preparations, suitable for inorganic and organic pigments.

Dispersogen PTS is a nonionic, surfactant based dispersing agent for water-based pigment preparations, suitable for organic pigments and carbon blacks.The product is recommended for use in point-of-sales colorants and concentrates for in-plant tinting. The general dosage recommendation is 5-40% on organic pigments.

Dispersogen 3169 is an anionic, polymeric dispersing agent for water-based pigment preparations, suitable for organic pigments and carbon blacks.Dispersogen 3169 is especially recommended for use in concentrates for in-plant tinting. The general dosage recommendation is 12-50% on organic pigments.

D-FOAM-R M752 is a high performance, water based, foam control product for metalworking fluids and cleaners. D-FOAM-R M752 contains defoaming surfactants and organo-modified silicone materials that are cold water rinseable and will not cause coating defects or adhesion problems. It offers excellent compatibility and persistence in all types of metalworking fluids, in some cases at concentrations as low as 50 ppm.

Genamin TA 100 is a fatty amine dispersing agent for pigment preparations.

Genagen 3SB is an optimized, mild three surfactant blend of Coco Betaine, Sodium Methyl Cocoyl Taurate and Sodium Cocoyl Isethionate. It is a mild surfactant blend which can be processed cold.

Dispersogen™ SI is a ready to use and optimized combination of dispersing and wetting agents for application with solid (WP and WG) formulations.

Genamin S 080 is a wetting Agent and can have other Adjuvant functions. It can be used in different formulation types.

Emulsogen HCO 040 is a solubilizer for active, essential and perfume oils and an O/W emulsifier for special emulsions.

Genamin S 100 is a wetting Agent and can have other Adjuvant functions. It can be used in different formulation types.

Dispersogen FSE is a nonionic, surfactant based dispersing agent for water-based and solvent based pigment preparations, suitable for inorganic pigments.Dispersogen FSE is recommended for use in point-of-sales colorants, in combination with an anionic dispersing agent such as Dispersogen 145, Dispersogen 4387, Dispersogen LFH or Dispersogen LFS. The general dosage recommendation is 5- 10 % on inorganic pigments.

Polyglykol 1500 PS is a polyethylene glycol with a mean molecular weight of 1500. Is is a solid in flake form.

Nipasol M is a broad spectrum antimicrobial agent designed for preservation of a wide range of cosmetics and toiletries. This product is freely soluble in most oils, waxes, fatty alcohols, but has relatively low solubility in water

Phenylsulfonat CA is a versatile anionic emulsifier based on branched CaDDBS in iso-butanol. It is widely used in different agrochemical formulation types and especially recommended for ECs.

Phenylsulfonat CAL is a versatile anionic emulsifier based on the more biodegradable linear CaDDBS in iso-butanol. It is widely used in different agrochemical formulation types and especially recommended for ECs.

Protectogen™ C aqua is a yellowish, water-soluble, glycol-free liquid which contains a highly efficient combination of corrosion inhibitors. The product is inhibited without the use of nitrite, amine, borate, phosphate, and silicate. The optimization of the corrosion inhibition system was performed without the use of CMR-substances ( C ancerogenic M utagenic R eprotoxic). According to the formulation, Protectogen™ C aqua does not contain any restricted substances as described in the EG-guideline 2011/65/EG (RoHS = Restriction of Hazardous Substances), article 4 §1 like lead, mercury, cadmium, chromate VI, polybrominated biphenyl (PBB) and polybrominated diphenyl ether (PBDE).

Polyglykol 12000 S is a solubilizer, binder, thickener and moisturizing agent. It offers low toxicity and no emulsifying effect. It possesses binding, softening and non-irritating properties. It is used in lotions, creams and hair styling products.

Sapogenat ™ T 139 is a nonionic surfactant for the chemical industry. This clear, yellowish liquid is composed of tributyphenol ethoxylate.

Safebrake 3 M is a quality DOT 3 fluid, significantly exceeding standard DOT 3 requirements.

Nipasept Sodium is paraben blend used as a preservative in personal care products.

Nipastat is an optimized paraben preservative blend for personal care products.

Safebrake 9 M (DOT 4) is a super DOT4 brake fluid with an extremely high wet boiling point.

Safebrake 10 M (DOT 4) is a brake fluid with extreme temperature resistance for the highest performance requirements, such as racing.

Safebrake 16 M (DOT 4) is the premium OEM choice for DOT 4 low viscosity and ISO4925:2020 class6 requirements.

Phenonip ME is a preservative blend for personal care products. It is a liquid version of short-chain parabens.

SilCare Silicone 1M71 is a delivery system for stearyl alcohol. It is ideal for anhydrous sunscreen formulations.

Phenonip XB is a preservative blend for personal care products. It is a liquid version of the optimized paraben blend.

Nipasol M Sodium is a broad spectrum antimicrobial agent designed for preservation of a wide range of cosmetics and toiletries. This product is effective against bacteria, molds and yeast.

Nipasol M mesh is a single long-chain paraben preservative for personal care products

TERRANA™ series is a specifically aluminosilicate based on selected bentonite and produced according to the highest industrial standards. It has high and selective surface area, efficiently binds polar and non-polar mycotoxins found in animal feedstuff and is safe for feed formulation, bind only harmful substances but not nutrients.

Polyglykol PE-K 270 S Plus is a high-performance lubricant, especially designed for the use in high pressure production processes of low density polyethylene (LDPE). It is a polyalkylene glycol (EO/PO random copolymer) with an excellent intrinsic lubricity and a high viscosity index, showing a favorable pressure-viscosity relationship.

Polyglykol BM 01/50 is a linear butyl and methyl end-capped polyalkylene glycol (PAG) to be used as a synthetic base fluid for high performance lubricants with outstanding low temperature chracteristics, extremely high viscosity index and good solubility in mineral oils.

VitiPure HCO is obtained by hydrogenation of castor oil. Hydrogenated castor oil is vegetable origin (castor oil) and is hydrophobic in nature. VitiPure HCO is in powder form intended for solid oral and topical use. At room temperature it is a fine milled solid powder with a high melting point (>80°C). In solid oral dose formulations, VitiPure HCO is applied as hydrophobic lubricant and as sustained release agent in solid oral formulations. In topical preparations, VitiPure HCO is used as viscosity enhancer and as consistency factor.

DIETHYLENGLYKOL EE is a solvent used in various industrial applications. It is a colorless liquid with a weak odor and is completely miscible with water.

GENAMIN T 150 is a tallow alkyl amine ethoxylate used as a raw material in various industrial applications.

PREVOL ZJ is a nonionic defoamer designed for paint formulations. It is a yellow liquid with an amine-like odor, soluble in solvents like acetone, ethanol, and glycerine, and stable in highly acidic and alkaline formulations.

PREVOL 3470 is a mixture of nitrogen-containing substances used as a defoamer in paint formulations

Hostapur OSB is used as an air entraining and wetting agent for mortars and plasters based on cement, gypsum, or lime. It leads to faster wetting of solid particles, rapid solubility, and micro foam development. It enables fast air-entrainment in mortars and plasters, improves plasticity and workability, and raises the performance of the plaster or mortar.

GENAMIN S 080 is a stearylamine ethoxylate used as a wetting agent in paint formulations

Exolit OP 1242 is a non-halogenated flame retardant based on organic phosphinates. The product achieves its flame-retardant effect through a combined gas phase and condensed phase mode of action. The thermoplastic polymer with Exolit OP 1242 forms on exposure to flame a stable char at the surface acting as a barrier. The protective layer provides a heat-insulating effect, reduces oxygen access and prevents dripping of molten polymer. Exolit OP 1242 is a white powder. For more details see our Innovation Spotlight video.

Licocare RBW 222 flakes TP TERRA is a high-performing additive based on renewable, non-food competing feedstock Given its favorable chemical structure, Licocare RBW 222 flakes TP TERRA shows a high thermal stability and a low volatility as well as a low tendency to migration. As a result of that, Licocare RBW 222 flakes TP TERRA is used as lubricant and dispersing agent in a wide variety of polymers like PVC, PS, PBT, PA, PDM, PC and TPU. It is also applied in polish & care industries, such as shoe & leather care and car care. It is a hard ester wax with lower polarity that can produce readily dispersible soaps. They are important for regulating the consistency of care products.

Licocare RBW 226 flakes TP TERRA is a high-performing additive based on renewable, non-food competing feedstock Given its favorable chemical structure, Licocare RBW 226 flakes TP TERRA shows a high thermal stability and a low volatility as well as a low tendency to migration. As a result of that, Licocare RBW 226 flakes TP TERRA is used as lubricant and dispersing agent in a wide variety of polymers like PVC, PS, PBT, PA, PDM, PC and TPU. It is also applied in polish & care industries, such as shoe & leather care and car care. It is a hard ester wax with lower polarity that can produce readily dispersible soaps. They are important for regulating the consistency of care products.

Polyglykol 1450 S* is a flaked polyethylene glycol excipient grade product, produced under IPEC GMP conditions. The flaked form enables easier handling of the material within production. It is specified according to the requirements of the main international ICH guidelines and monographs. *only in combination with a Pharma CoA

Nipacide MBM is a low toxicity biocide developed for use in metal working concentrates. Nipacide MBM is effective against a wide range of microorganisms including gram positive and gram negative bacteria, yeast and fungi. Microorganisms grow at a rapid rate and without use of the correct biocide, numbers can increase dramatically.

Polyglykol B11/100 is a polyalkylene glycol (PAG) to be used as synthetic base fluid in high performance lubricants with low friction coefficients, excellent wear properties and good thermal stability.

Emulsogen 3971 is package based on Na/TEA mix salt of a complex amino carboxylic acid/anionic. Its appearance is brownish, clear and oily liquid.

Nipagin M Sodium is a highly water-soluble short-chain paraben in sodium salt form. The major benefit offered by the sodium salts is their high solubility in cold water, thereby enabling the introduction of parabens without heating or pre-dissolving in solvents.

JMAC S 10 is a preservative active with antimicrobial properties that reduces the spread of bacteria over the long term. The attractiveness of JMAC’s antimicrobial protection is reinforced by its low toxicity, non-sensitizing performance and very low environmental impact. JMAC meets Ecolabel standards for use in paints and coatings. Paint and coatings manufacturers benefit from easy and economical formulation. The JMAC biocides are effective at very small ppm addition levels and offer low viscosity liquid dispersion. Safe handling is assured through the non-flammability, non-corrosive nature of JMAC. For In-can preservation, the excellent thermal and pH stability of JMAC biocides means they can be used in a wide range of industrial applications, such as polymer emulsions, paints, sealants and adhesives.

Genagen IS 140 is a fatty acid polyglycid ester based isostearic acid used as an emulsifier in cutting and forming fluids.

Genamin SH 100 D is a primary amine and used as an intermediate for polyurea greases.

Genamin 8 R 100 D is used as an intermediate for polyurea greases. Its appearance is a colourless liquid.

Genapol BA 020 is an ethoxylated alcohol used as an emulsifying, low foaming surfactant in metal cleaning formulations. An aromatic ring is incorporated into the structure, which offers unique emulsification and greater solvency than typical linear or branched alcohol ethoxylates.

Emulsogen CLE 070 is an ether carboxylic acid with excellent emulsification and dispersing properties. It is used for metal working fluids, fire resistant hydraulic fluids (HFA-S) and rolling emulsions. The product is extremely stable against electrolyte and hard water. Furthermore Emulsogen CLE 070 shows outstanding lime soap dispersing power, being able to disperse large quantities of calcium oleate or tallate.

Hostastat FE 20 is a fatty acid ester which provides highly effective internal antistatic properties to thermoplastic polymers.

TONSIL ™ CO series catalysts have been establishing an outstanding status around the world. The Tonsil series has multiple products for each process to meet the different requirements in terms of activity and selectivity. Generally, Tonsil catalysts contain less side reaction active sites and have high surface area and superior pore properties. Those properties ensure the long cycle time of Tonsil catalysts, thus reduce the number of change outs and operation cost, increase the operation efficiency and reduce energy consumption. Clariant has years of experience in aromatics treatment and is committed to continuously improve these materials to adapt them to the increasing requirements of thepetrochemical industry.

Clariant’s CPA series is an advanced catalytic solution for the production of BTX aromatics and high-octane gasoline from light olefins and paraffins, such as LPF and gas condensates. Our high-performance catalysts are designed to maximize yields, thus enhancing plant profitability. Thanks to their outstanding thermo-mechanical stability and excellent regenerability, the catalysts ensure a long lifetime of reliable, cost-effective production. We offer CPA catalysts for both fixed-bed and moving-bed process designs. Depending on the plant’s feedstock composition, customers can choose from a variety of olefin and paraffin aromatization catalysts with tailored activity and selectivity.

The StyroMax™ series is designed to promote the dehydrogenation of ethylbenzene to styrene monomer far more efficiently than many other state-of-the-art catalysts. Thanks to their outstanding selectivity and high activity, the catalysts help to maximize styrene yield while minimizing by-product formation. Producers also benefit from reliable operation with low deactivation rates, low pressure drop, and high resistance to coke formation or accidental poisoning. A complete range of StyroMax catalysts are available for both standard and ultra-low steam-to-oil (SOR) or steam-to-hydrocarbon (SHR) ratios. Because they require less steam for styrene production, the latter versions reduce energy costs, and allow more sustainable operation.

Clariant’s highly selective MTPROP™ catalyst series is specially designed for the Methanol to Propylene (Lurgi MTP™) technology jointly developed by Air Liquide and Clariant. Air Liquide’s Lurgi MTP™ process combines an efficient reactor system with Clariant's highly selective MTPROP zeolite-based catalysts, to convert methanol to propylene in the presence of steam. An industry benchmark for MTP applications, the MTPROP catalyst series helps cover the growing demand for on-purpose propylene production derived from flexible C1-Cx feedstock. The technology and catalysts have been successfully proven at several commercial plants throughout China.

Litol™ is a high-performance catalyst for conversion of light oil, a by-product from the coking of coal, into high-purity benzene. This complex, single-step process achieves desulfurization, removal of paraffins and naphthenes, and saturation of unsaturated compounds, in addition to dealkylation and dehydrogenation. The catalyst operates at lower temperatures than thermal processes, and delivers excellent product purity (benzene content in the end-product exceeding 99.93 wt%). Hence, petrochemical producers attain maximum productivity at minimum costs.Our complete range of catalysts for dehydrogenation and dealkylation of aromatic hydrocarbons to benzene includes:Litol™ for light oil to benzeneDetol™ for toluene to benzenePyrotol™ for pyrolysis petrol to benzeneLitol, Detol and Pyrotol technologies are exclusively licensed by our process partner, Lummus Technology, while the catalysts are solely produced and supplied by Clariant.

Detol™ is a high-performance catalyst designed for selective dehydrogenation and dealkylation of toluene to benzene. Thanks to the catalyst’s high aromatic selectivity, petrochemical producers benefit from excellent product purity, with benzene content in the end-product exceeding 99.93 wt%. Detol is designed for use in an economical, single-step process, which eliminates the need for separate hydrotreating to reduce olefin or sulfur content in feedstock. Our complete range of catalysts for dehydrogenation and dealkylation of aromatic hydrocarbons to benzene includes:Detol™ for toluene to benzene Litol™ for light oil to benzene Pyrotol™ for pyrolysis petrol to benzeneDetol, Litol and Pyrotol technologies are exclusively licensed by our process partner, Lummus Technology, while the catalysts are solely produced and supplied by Clariant.

OleMax™ 200 series catalysts are developed for selective hydrogenation of acetylene to ethylene in tail-end process configurations. Thanks to their outstanding performance, excellent stability and long operating cycles, the catalysts help producers increase ethylene yield and total profitability while reducing operating costs. The promoted-palladium catalysts have a long record of performance at ethylene plants throughout the world, where they are used for a variety of feedstocks. We offer a choice of catalysts in different shapes and sizes, which are tailored to meet the unique needs of each operating plant.

Pyrotol™ is a catalyst developed for selective dehydrogenation and dealkylation of pyrolysis gas (pygas) to high-purity benzene. The Pyrotol process converts the C6 to C9 fraction of pyrolysis liquids obtained as a by-product of ethylene production. Compared to the Litol™ process, Pyrotol achieves more hydrocracking of non-aromatics, and a comparable amount of hydrodealkylation, but offers less desulfurization. The catalyst provides high activity and selectivity at lower operating temperatures than thermal processes, thereby supporting the operational and commercial success of petrochemical producers. Our complete range of catalysts for dehydrogenation and dealkylation of aromatic hydrocarbons to benzene includes:Pyrotol™ for pyrolysis petrol to benzene Litol™ for light oil to benzene Detol™ for toluene to benzene Pyrotol, Litol and Detol technologies are exclusively licensed by our process partner, Lummus Technology, while the catalysts are solely produced and supplied by Clariant.

OxyMax™ is a series of oxychlorination catalysts designed for efficient production of ethylene dichloride (EDC) from ethylene. The range offers excellent stability, selectivity and activity during operation, to maximize ethylene dichloride yields and plant profitability. Producers also benefit from greater flexibility, as the catalysts allow oxychlorination in fluid-bed reactors operated with either air or oxygen, and work under a wide range of operating conditions, such as different feed gas compositions, temperatures, or plant capacities. We offer a broad range of catalysts to suit different plant requirements and processes:OxyMax™ A: for all standard fluid-bed applications OxyMax™ B: for medium and high temperatures (225-240°C)OxyMax™ V: provides maximum performance in fluid-bed reactors OxyMax™ M: for fluid-bed reactors using Mitsui Chemicals technology OxyMax™ MW: make-up catalyst for reactors using OxyChem’s Catoxid technology OxyMax™ S & OxyMax™ BS: make-up catalysts for units with high loss of fine particles; developed to increase activity and restore fines

Cartuchos dessecantes proporcionam proteção contra problemas relacionados à umidade para uma ampla gama de aplicações em recipientes, caixas, dispositivos elétricos e ópticos. A linha da Clariant contém diferentes designs e acabamentos: Os cartuchos dessecantes vêm com enchimento de Peneira Molecular ou Gel de Sílica devido a diferentes especificações ou usos finais. A maioria de nossos cartuchos dessecantes é projetada para atender às especificações militares e está listada sob um Número NATO de Estoque (NSN). Designs especiais estão disponíveis sob demanda e refletem um desenvolvimento personalizado com base em nossa experiência.

Os plugues dessecantes ADSORMAT® para sistemas abertos são instalados nos bicos dos suspiros de tambores, KTC/IBCs e tanques. O ADSORMAT® seca a coluna de ar acima do produto dentro do recipiente, bem como qualquer ar úmido que entre posteriormente pelo bico do suspiro à medida que se esvazia o recipiente. Evitam-se assim reações químicas que, do contrário, poderiam ocorrer em uma atmosfera úmida. Cada plugue dessecante ADSORMAT® vem equipado com um indicador de umidade reversível, em que a mudança de cor mostra quando o seu limite de capacidade foi atingido.

The Genapol X products combine low-foam emulsification and wetting properties which make them the first choice for many NPE-free formulations as emulsifier, wetting Agent and Adjuvant.

The Genapol X products combine low-foam emulsification and wetting properties which make them the first choice for many NPE-free formulations as emulsifier, wetting Agent and Adjuvant.

Polyglykol 8000 PS is a polethylene glycol with a mean molecular weight of 8000. It is a spray dried powder.

Nipacide HF-I is an in-can biocide based on chloromethyl and methylisothiazolinone + formaldehyde. Nipacide HF-I is a water based, liquid biocide specifically developed for the complete in-can microbiological protection of industrial water-based products against bacterial and fungal spoilage in the wet state. It is effective against a wide range of common spoilage organisms and can be used over a pH range 4-9 and temperature range up to 40°C.

Nipacide DFX 1 is an aqueous dispersion dry film fungicide based on Carbendazim, Diuron and Octyl isothiazolinone. Nipacide DFX1 is recommended for protection of a wide range of coating applications including water based decorative paints, wood stains and colours. Nipacide DFX 1 is effective against a wide range of fungal and algal species, responsible for the discoloration and degradation of surface coatings.

Nipacide CI 15 HS is an in-can biocide based on CMIT/MIT. Nipacide CI 15 HS is a water-based, low toxicity biocide developed for the complete in-can protection of water based products including water based /Latex/PVA adhesives, PVA / Acrylic polymer emulsions, water based decorative paints, printing inks, metal working fluids and construction admixtures. Nipacide CI 15 HS is effective against a wide range of microorganisms including gram positive and gram negative bacteria, yeast and fungi. Thermal and pH stability for Nipacide CI 15 HS is a critical consideration and it should not be used for products with pH > 9 or production temperatures of > 40 °C.

Nipacide DFX 5 is an aqueous dispersion dry film fungicide based on Carbendazim, Diuron and Octyl isothiazolinone. Nipacide DFX 5 is recommended for protection of a wide range of coating applications including water based decorative paints, wood stains and colours. Nipacide DFX 5 is effective against a wide range of fungal and algal species, responsible for the discoloration and degradation of surface coatings.

Nipacide CDI is an aqueous dispersion, dry film fungicide based on Carbendazim. Nipacide CDI is recommended for a wide range of coating applications including water-based paints and wood coatings. It is effective against a wide range of fungal species, responsible for the discoloration and degradation of surface coatings.

Nipacide CFX is an in-can biocide based on formaldehyde + chloromethyl and methylisothiazolinone. Nipacide CFX is water based low toxicity isothiazolinone/ formaldehyde donor biocide, developed for the complete in-can and head space protection of water based products. Nipacide CFX is effective against a wide range of microorganisms including gram positive and gram negative bacteria, yeast and fungi. When products are prone to surface contamination by fungi and head space protection is required, Nipacide CFX should be the biocide of choice. Nipacide CFX is effective against a wide range of spoilage organisms effective over a wide pH and temperature range.

DEET is the key worldwide known insect repellent active ingredient. It is used in products designed to protect consumers from biting insects and ticks, and the serious diseases they can carry (Malaria, yellow fever, dengue fever, West Nile virus)

Natural molding sand additives for superior quality in precision castings: GEKOUnrivaled precision, smooth processability and easy shake-out for iron and steel castings: GEKO is the effective booster for foundry productivity and perfect castings. Our unique eco-friendly technology, GEKO LE, drastically reduce emissions and help foundries comply with highly demanding environmental regulations and standards. This is our two-tiered Bentonite solution to provide a one-of-a-kind efficient molding system. Discover LE Technology

Dare to drill: BENTONIL™ and MONTIGEL™ civil engineering additives by Clariant Natural BENTONIL™ and TIXOTON™ drilling additives are based on selected bentonite clays and tailored to suit the most demanding civil engineering applications – from tunneling, pipe jacking, horizontal directional drilling (HDD) and vertical drilling to special foundations. A wide range of grades, a global production and sales network, and unrivalled application knowledge – civil engineers rest assured that Clariant can support any project, wherever, whatever. And when it comes to put things to a final rest, count on Montigel™ soil sealing and geotextile bentonites. With our raw material millions of years old, chances are that whatever you want to keep away from the biosphere will stay away.

Emulsogen HCO 060 is a solubilizer for active, essential and perfume oils and an O/W emulsifier for special emulsions.

Safebrake 6 M (DOT 4) is an OEM-choice brake fluid that significantly exceeds DOT4 requirements.

Genapol LT is a special thickener for those systems where electrolytes do not work enough.

Polyethylene glycol allyl methyl ether

Polyethylene glycol allyl methyl ether

Polyethylene glycol allyl methyl ether

Polyethylene glycol allyl methyl ether.

Solution of anionic and nonionic surface active agents in water

Dare to drill: BENTONIL™ and MONTIGEL™ civil engineering additives by Clariant Functional Minerals Natural BENTONIL™ and TIXOTON™ drilling additives are based on selected bentonite clays and tailored to suit the most demanding civil engineering applications – from tunneling, pipe jacking, horizontal directional drilling (HDD) and vertical drilling to special foundations. A wide range of grades, a global production and sales network, and unrivalled application knowledge – civil engineers rest assured that Clariant can support any project, wherever, whatever. And when it comes to put things to a final rest, count on Montigel™ soil sealing and geotextile bentonites. With our raw material millions of years old, chances are that whatever you want to keep away from the biosphere will stay away.

Hostaphat TBEP HQ is a phosphate ester used as plasticizer for polymer dispersions.

Dispersogen 145 is an anionic, surfactant-based dispersing agent for water-based and solvent-based pigment preparations, suitable for organic and inorganic pigments.Dispersogen 145 is recommended for use in point-of-sales colorants in combination with a nonionic dispersing agent, e.g. Dispersogen MT 200.The general dosage recommendation is 2-3% on organic pigments and 2-3% on inorganic pigments.

TONSIL ™ CO series catalysts have been establishing an outstanding status around the world. The Tonsil series has multiple products for each process to meet the different requirements in terms of activity and selectivity. Generally, Tonsil catalysts contain less side reaction active sites and have high surface area and superior pore properties. Those properties ensure the long cycle time of Tonsil catalysts, thus reduce the number of change outs and operation cost, increase the operation efficiency and reduce energy consumption. Clariant has years of experience in aromatics treatment and is committed to continuously improve these materials to adapt them to the increasing requirements of the petrochemical industry.

TONSIL ™ APT series catalysts have their basis on the expertise which was gained with the TONSIL™ CO series. The Tonsil APT series has multiple products for each process to meet the different requirements in terms of activity and selectivity. Generally, Tonsil catalysts contain less side reaction active sites and have high surface area and superior pore properties. Those properties ensure the long cycle time of Tonsil catalysts, thus reduce the number of change outs and operation cost, increase the operation efficiency and reduce energy consumption. Clariant has gained now also with APT series years of experience in aromatics treatment. TONSIL™ APT series has several advantages over the TONSIL™ CO series. No sand grading is required - Loading procedure is less complex without sand grading Higher bulk density Longer cycle life Less start-ups and shut-downs Lower pressure drop Lower energy consumption Finally leads to lower CAPEX and OPEX over the whole year

TONSIL ™ APT series catalysts have their basis on the expertise which was gained with the TONSIL™ CO series. The Tonsil APT series has multiple products for each process to meet the different requirements in terms of activity and selectivity. Generally, Tonsil catalysts contain less side reaction active sites and have high surface area and superior pore properties. Those properties ensure the long cycle time of Tonsil catalysts, thus reduce the number of change outs and operation cost, increase the operation efficiency and reduce energy consumption. Clariant has gained now also with APT series years of experience in aromatics treatment. TONSIL™ APT series has several advantages over the TONSIL™ CO series. No sand grading is required - Loading procedure is less complex without sand grading Higher bulk density Longer cycle life Less start-ups and shut-downs Lower pressure drop Lower energy consumption Finally leads to lower CAPEX and OPEX over the whole year

TONSIL ™ CO series catalysts have been establishing an outstanding status around the world. The Tonsil series has multiple products for each process to meet the different requirements in terms of activity and selectivity. Generally, Tonsil catalysts contain less side reaction active sites and have high surface area and superior pore properties. Those properties ensure the long cycle time of Tonsil catalysts, thus reduce the number of change outs and operation cost, increase the operation efficiency and reduce energy consumption. Clariant has years of experience in aromatics treatment and is committed to continuously improve these materials to adapt them to the increasing requirements of the petrochemical industry.

ActiSorb™ CI adsorbents are designed for efficient removal of HCl (hydrogen chloride) and RCl (organic chlorides). Our high-performance chloride guards provide the strength and stability critical for trouble-free operation in numerous applications in the refining and petrochemical industry.Typical applications include removal of HCl from hydrogen streams and removal of RCl from BTX streams in continuous catalytic reforming (CCR) units; effluent treatment from dehydrogenation process units; as well as feed purification for hydrogen production units (HPU) and hydrogen purification units (PSA). The zinc-oxide based chloride guards were developed in close cooperation with customers, and are available in a variety of compositions, shapes and sizes for either gas or liquid phase processes.

ActiSorb™ CI 5 is used in combination with ActiSorb™ Cl 10 for the removal of very high levels of HCl in the refining and petrochemical industry. The chloride guard is typically used for purification of net gas downstream continuous catalytic reforming (CCR) operations and for the treatment of effluents from dehydrogenation process units.

TONSIL ™ CO series catalysts have been establishing an outstanding status around the world. The Tonsil series has multiple products for each process to meet the different requirements in terms of activity and selectivity. Generally, Tonsil catalysts contain less side reaction active sites and have high surface area and superior pore properties. Those properties ensure the long cycle time of Tonsil catalysts, thus reduce the number of change outs and operation cost, increase the operation efficiency and reduce energy consumption. Clariant has years of experience in aromatics treatment and is committed to continuously improve these materials to adapt them to the increasing requirements of the petrochemical industry.

TONSIL ™ CO series catalysts have been establishing an outstanding status around the world. The Tonsil series has multiple products for each process to meet the different requirements in terms of activity and selectivity. Generally, Tonsil catalysts contain less side reaction active sites and have high surface area and superior pore properties. Those properties ensure the long cycle time of Tonsil catalysts, thus reduce the number of change outs and operation cost, increase the operation efficiency and reduce energy consumption. Clariant has years of experience in aromatics treatment and is committed to continuously improve these materials to adapt them to the increasing requirements of the petrochemical industry.

TONSIL ™ APT series catalysts have their basis on the expertise which was gained with the TONSIL™ CO series. The Tonsil APT series has multiple products for each process to meet the different requirements in terms of activity and selectivity. Generally, Tonsil catalysts contain less side reaction active sites and have high surface area and superior pore properties. Those properties ensure the long cycle time of Tonsil catalysts, thus reduce the number of change outs and operation cost, increase the operation efficiency and reduce energy consumption. Clariant has gained now also with APT series years of experience in aromatics treatment. TONSIL™ APT series has several advantages over the TONSIL™ CO series. No sand grading is required - Loading procedure is less complex without sand grading Higher bulk density Longer cycle life Less start-ups and shut-downs Lower pressure drop Lower energy consumption Finally leads to lower CAPEX and OPEX over the whole year

TONSIL ™ CO series catalysts have been establishing an outstanding status around the world. The Tonsil series has multiple products for each process to meet the different requirements in terms of activity and selectivity. Generally, Tonsil catalysts contain less side reaction active sites and have high surface area and superior pore properties. Those properties ensure the long cycle time of Tonsil catalysts, thus reduce the number of change outs and operation cost, increase the operation efficiency and reduce energy consumption. Clariant has years of experience in aromatics treatment and is committed to continuously improve these materials to adapt them to the increasing requirements of the petrochemical industry.

TONSIL ™ APT series catalysts have their basis on the expertise which was gained with the TONSIL™ CO series. The Tonsil APT series has multiple products for each process to meet the different requirements in terms of activity and selectivity. Generally, Tonsil catalysts contain less side reaction active sites and have high surface area and superior pore properties. Those properties ensure the long cycle time of Tonsil catalysts, thus reduce the number of change outs and operation cost, increase the operation efficiency and reduce energy consumption. Clariant has gained now also with APT series years of experience in aromatics treatment. TONSIL™ APT series has several advantages over the TONSIL™ CO series. No sand grading is required - Loading procedure is less complex without sand grading Higher bulk density Longer cycle life Less start-ups and shut-downs Lower pressure drop Lower energy consumption Finally leads to lower CAPEX and OPEX over the whole year

ActiSorb™ S7 RS is designed for the removal of trace sulfur compounds from liquid hydrocarbon streams, such as naphtha purification in catalytic reformers and isomerization units. Due to its computer designed shape (CDS) and high nickel content, ActiSorb S7 RS has a much higher capacity for sulfur than standard nickel-based materials and copper-based adsorbents. This makes it ideal for applications requiring fine purification. Since ActiSorb S7 RS is non-selective, it can efficiently remove a wide range of refractory sulfur species such as H2S, disulfides, mercaptans and thiophenes under a wide range of operating conditions.

AmoMax™ 10RS is a highly active wustite-based ammonia synthesis catalyst, which is manufactured by reduction and subsequent stabilization of oxidic AmoMax 10. Pre-reduction not only shortens start-up time, but also decreases the formation of reduction water during activation. As with the oxidic form, AmoMax 10RS offers outstanding activity – much higher than magnetite-based ammonia synthesis catalysts. This significantly increases ammonia yields and lowers costs, making AmoMax 10RS the optimal choice for the fertilizer industry.Watch our Innovation Spotlight video to learn more.

ActiSorb™ CI 6 is a high capacity chloride adsorbent designed for efficient removal of HCl and RCl (organic chlorides) in liquid phase applications. The chloride guard is typically used for reformate and LPG purification in continuous catalytic reforming (CCR) operations; and feed purification for aromatics treatment units (BTX) in the refining and petrochemical industry.

AmoMax™ 10 is a wustite-based ammonia synthesis catalyst with much higher activity than magnetite types. This improves conversion at low operating temperatures and at more thermodynamically favorable conditions, thus raising ammonia yields. Due to reduced recycles and loop pressure, it also saves energy. Thanks to its exceptional ability to increase ammonia production, AmoMax 10 is very valuable for the fertilizer industry, and used by over 100 customers globally. Our wustite-based catalyst also contains less oxygen than magnetite catalysts, thus greatly reducing reduction times. Furthermore, it offers excellent long-term stability as expected for the magnetite type. The ammonia synthesis catalyst is supplied in its oxidic form (AmoMax 10) or as pre-reduced and stabilized in air (AmoMax 10RS).Watch our Innovation Spotlight video to learn more.

Thanks to its high adsorption capacity, ActiSorb™ Cl 2 prevents in steam reforming units the poisoning of downstream catalysts, such as steam reforming and methanol synthesis catalysts. It also protects downstream units and equipment from fouling, deposits and corrosion. The hydrogen plant thus avoids unexpected shutdowns, and costly replacements. Moreover, through efficient, long-term removal of HCl, the chloride guard also helps to reduce harmful emissions.Downstream CCR units ActiSorb CI 2 is used to remove HCl from the hydrogen rich gas streams.

OleMax™ 260 is a new generation selective acetylene hydrogenation catalyst designed for ethylene production using front-end process configurations. While OleMax series catalysts have been proven in commercial operation for decades, the new catalyst offers ultra-high selectivity for acetylene hydrogenation yet virtually no reactivity with ethylene. This maximizes product yields while minimizing energy and raw material consumption.Moreover, the promoted-palladium catalyst all but eliminates the risk of runaways by pushing runaway temperature far beyond standard operating temperature. The exceptional selectivity and consequent stability of OleMax 260 ensures reliable, on-specification performance over an unprecedentedly wide operating range, even at the extremely low CO levels typical of new cracking furnace technologies.

OleMax™ 350 is the proven catalyst series for liquid phase methylacetylene and propadiene (MAPD) hydrogenation in tail-end process configurations. Thanks to their computer designed shape (CDS) and optimized palladium dispersion, the catalysts offer unparalleled selectivity and activity to maximize conversion of MADP and increase propylene yields for use in downstream processes. Depending on operating conditions, the palladium-based catalysts offer a very long life cycle of 10 to 15 years. Another important advantage of the catalysts is their ability to minimize green oil formation, thus preventing contamination and fouling.

The OleMax™ 800 catalyst series is developed for second-stage hydrotreatment of commercial pyrolysis gasoline (pygas) units. The catalysts selectively hydrogenate olefins from the pygas, while also converting organic sulfur to hydrogen sulfide via hydrodesulfurization. Due to their high selectivity, the catalysts prevent loss of valuable BTX aromatics (benzene, toluene and xylene isomers). OleMax 800 series catalysts also offer excellent activity at low operating temperatures, and extremely low pressure drop. The C5+ fraction of raw pyrolysis gasoline must undergo two-stage hydrotreatment to saturate diolefins, olefins, and aromatic unsaturates (especially styrene) before use in other processes. In addition to the above-mentioned OleMax 800 catalysts for the second stage of this process, Clariant also offers the OleMax™ 600 series for first-stage hydrotreatment.

With over 60 years of continuously improved performance, CATOFIN technology is a highly reliable and productive method for light paraffin dehydrogenation. The process operates at thermodynamically advantaged reactor pressure and temperature to maximize conversion of propane to propylene, while reducing investment and operating costs. As an ongoing commitment to advance catalyst technology, Clariant consistently improves the CATOFIN process with innovations such as Heat Generating Material (HGM) and new catalyst generations. CATOFIN 311 delivers even greater selectivity and a longer lifetime of service, resulting in increased overall profitability for PDH producers. Thanks to its extraordinarily high reliability and productivity, CATOFIN delivers excellent production output annually compared to alternative technologies. For a typical 600 kta PDH unit, this innovation translates to a potential of up to $20 million of additional productivity over the lifetime of the CATOFIN 311 catalyst. Learn more about our high performance CATOFIN catalysts

At Clariant, we have been developing and manufacturing catalysts to clean exhaust gases from combustion processes since the early 1980s. They are used for engines running on various fuels, such as natural gas, diesel, bio-diesel, LPG, landfill gas, synthetics, dimethyl ether, alcohols, or methane. EnviCat TWC is a three-way catalyst (TWC) for engine emission control. It removes volatile organic compounds (VOCs) from the off-gases of stationary engines and gas turbines. The catalyst oxidizes carbon monoxide (CO) and other hydrocarbons (HCs). At the same time, it reduces nitrogen oxides (NOx) into CO2, water and nitrogen. It can be used in rich-burn applications with air-fuel-ratio control (lambda control).

HYSOPAR™ 5000 is an upgrading catalyst for isomerization of C5 and C6 feedstocks, enabling cost-effective octane enhancement in fuel. The catalyst has set standards in performance and robustness over the last ten years, as demonstrated in numerous isomerization units around the world.

HYDEX™ G is a distillate upgrading catalyst used to greatly improve cold flow properties of high-sulfur middle distillates, ranging from kerosene to heavy diesel, via selective mild hydrocracking of long-chain normal paraffins. The zeolite-based catalyst is extremely robust and fully regenerable.

HYSOPAR™ 6000 is a platinum-promoted zeolite-based upgrading catalyst for isomerization of C5 and C6 naphtha feedstocks which enables cost-effective octane enhancement in fuel. The higher density of the catalyst’s active sites increases conversion even with limited reactor volume.

K catalysts are acid-activated bentonites designed for slurry-based reactions. Key parameters of the solid-acid catalysts – such as acidity, porosity, surface area or cation exchange capacity – can be optimized for specific applications. The meso- and macroporous catalysts are based on alumosilicates.

HYSOPAR™ 7000 is a distillate upgrading catalyst designed for isomerization of C7+ feedstocks which allows cost-effective enhancement of fuel properties, such as knock resistance, cold flow, and vapor pressure. The catalyst can be used to upgrade cold flow properties of hydrogenated vegetable oil (HVO), also frequently called diesel or renewable diesel.

FAMAX™ 200 is a next-generation catalyst for methanol to formaldehyde oxidation that is optimized to enhance plant efficiency. The catalyst’s advanced composition and design achieve higher specific formaldehyde production at lower cooling medium temperatures, thus increasing overall plant economy.

AC 6120 catalysts are designed for the removal of radioactive inorganic iodine as well as iodine bound in organic compounds such as methyl iodine (iodomethane). The adsorbers are commonly used in nuclear power plants, nuclear waste reprocessing plants, and nuclear off-gas or air monitoring systems.

HYDEX™ C is a high-conversion dewaxing and isomerization catalyst with selective ring-opening functionality which increases naphtha yields. The distillate upgrading catalyst’s unique composition ensures improved product swelling, high cetane numbers, and improved cold flow in the diesel boiling range.

CMG 1 is a zeolite-based catalyst designed for the conversion of methanol to gasoline (CMG), also known as the methanol to gasoline (MTG) process. CMG 1 is industrially proven to offer excellent performance in cost-effective production of high-quality gasoline-blending compounds from methanol.CMG 1 is typically used as a second-stage catalyst, after the dimethyl ether (DME) reactor is loaded with the SynMax™ sulfur recovery catalyst.

HDMax® 800 is a platinum-based distillate upgrading catalyst for hydrogenation of lighter feedstock, such as naphtha, to light diesel. Due to its special shape and dimensions, the catalyst offers superior activity and robustness, as well as favorable options for heat integration in hydrofinishing.

SHUMax™ catalysts are designed for the removal of dienes from olefin streams in selective hydrogenation units (SHU’s) downstream of cracking equipment. The palladium-based fuel upgrading catalysts are offered in a variety of forms and customized to the specific requirements of each refinery.

DSM 11 is a catalyst for the removal of radioactive inorganic iodine in nuclear power plants, nuclear waste reprocessing plants, and off-gas and air monitoring systems. It has been designed for the selective absorption of inorganic iodine in the presence of organic iodine compounds such as methyl iodine. In combination with Clariant's AC 6120 – which absorbs both iodine bound in organic compounds and inorganic iodine – complete iodine-balances can be generated.

ActiSorb G 1 is a copper promoted zinc oxide used for the purification of natural gas containing low concentrations of total sulphur. Simultaneous hydrosulphurisation and H2S pick-up is a feature unique to ActiSorb G 1. Even when saturated it fully retains its hydrogenation capabilities.

ActiSorb™ GP 105 is a fast-reacting adsorbent for the purification of hydrocarbon gas streams containing hydrogen sulfide (H2S). The mixed-metal sulfur scavenger offers outstanding activity and selectivity to ensure effective sulfur removal at low temperatures.

The VAMax™ series of selective oxidation catalysts offers high activity for Vinyl-Acetate Monomer (VAM) producers. VAM is produced by reacting ethylene and acetic acid with oxygen (oxy-acetylation) in the presence of a catalyst. It is an essential building block for various polymer and co-polymer derivatives.

AcryloMax™ allows more profitable and efficient production of acrylonitrile (AN), which is an important intermediate in the value chain of plastics and synthetic fibers for the automotive and textile industries. AN is produced from propylene, ammonia and air in contact with a catalyst. The AcryloMax catalyst enables synthesis of acrylonitrile via ammoxidation of propylene in a fluidized bed reactor. Hydrogen cyanide (HCN) is also generated as a valuable side product.

EleMax™ catalysts are designed for storing hydrogen from renewable energy sources, such as wind or hydro power. They are used in an innovative technique developed by Clariant’s partner, Hydrogenious Technologies, to transport hydrogen by chemically binding the molecules to Liquid Organic Hydrogen Carriers (LOHC). In the method, hydrogenation of the liquid organic hydrocarbon dibenzyltoluene via EleMax H “stores” hydrogen, while its dehydrogenation with EleMax D “releases” hydrogen on demand. This provides the handling flexibility required for widespread roll-out of hydrogen production from renewable power sources (Power-to-Gas, Power-to-X).

ReforMax™ 410 LDP is a highly active and robust catalyst for secondary reforming in the production of syngas, such as ammonia and methanol. The nickel oxide catalyst helps to minimize attrition during operation, thus preventing deposits in the waste heat boiler downstream. Thanks to its 10-hole shape, ReforMax 410 LDP also decreases pressure drop. The secondary reforming catalyst is typically used for the bulk of the reactor load.

ReforMax™ 330 LDP is a nickel-based catalyst for steam reforming of NG (natural gas) in the production of ammonia, hydrogen and methanol. The catalyst offers high activity and outstanding stability in a 10-hole ring shape that ensures low pressure drop. Syngas producers also benefit from the suppression of coke (carbon) formation, especially when ReforMax 330 LDP is combined with ReforMax 210 LDP. Based on more than 60 years of expertise in catalysis, Clariant’s ReforMax series is commercially proven to be highly effective for a variety of feed conditions and process designs.

ShiftMax™ 207 is an extremely robust low temperature shift (LTS) catalyst with high copper dispersion, resulting in outstanding activity and stability for water gas shift reactions. The catalyst also offers high CO conversion over its long lifetime, excellent poison resistance and superior strength.ShiftMax 207 is also available as ShiftMax™ 217, which is specially promoted to further minimize methanol by-product formation. Both state-of-the-art syngas catalysts are successfully operated in numerous commercial LTS reactors worldwide, where they have proven their outstanding performance and stability.

ReforMax™ 400 GG is an active guard catalyst for secondary and autothermal reforming in the production of syngas, such as ammonia and methanol. It is typically used as a heat shield in the top layer instead of hexagonal target bricks. Unlike alumina balls and lumps, ReforMax 400 GG is catalytically active, and helps lower the bed temperature due to the endothermic reaction. The syngas catalyst is also ideal for use as a bottom-active support layer where extreme short loadings are required, or as a replacement for high-purity inert supports.

ShiftMax™ 210 is an extremely robust low temperature shift (LTS) catalyst with excellent copper dispersion, resulting in high activity and stability for water gas shift reactions. The syngas catalyst also offers high CO conversion over a long lifetime, high poison resistance, and superior strength.ShiftMax 210 is successfully operated in numerous commercial LTS reactors worldwide, where it has demonstrated its outstanding performance and stability.

ShiftMax™ 217 is a promoted version of our high-performance ShiftMax™207 low temperature shift (LTS) catalyst. The special promoter minimizes methanol by-product formation without decreasing the catalyst’s outstanding activity and stability for water gas shift reactions. Both ShiftMax syngas catalysts also feature high CO conversion over their long lifetimes, excellent poison resistance and superior physical strength. Their unparalleled performance and stability have been proven in numerous commercial LTS reactors worldwide.

ShiftMax™ 120 is a high temperature shift (HTS) catalyst that combines high activity and thermal stability with extreme robustness, enabling it to withstand potential boiler leakages. The syngas catalyst also effectively prevents Fischer-Tropsch by-product formation at low steam-to-gas conditions.ShiftMax 120 is also available as ShiftMax™ 120 HCF, which offers the same outstanding performance but contains essentially no hexavalent chromium.

ShiftGuard™ 200 powerfully adsorbs and retains chlorides so that the downstream LTS catalyst, such as ShiftMax™ 217, is fully protected and can exhibit its superior activity and longevity. The chloride guard’s proprietary mixed metal oxide formulation supports sustainability as it is chromium free.In addition to its outstanding mechanical strength, ShiftGuard 200 presents high initial CO shift activity with low methanol by-product formation, which strongly supports the LTS reaction in the main catalyst bed.

ReforMax™ M is a catalyst designed for steam reforming of methanol to produce hydrogen and carbon monoxide. This syngas catalyst offers outstanding mechanical and thermal strength, which enables it to withstand the extreme operating conditions required for methanol to hydrogen reforming.

ShiftGuard™ 100 is a ring-shaped, inert guard material based on high temperature fired alumina, which offers superior strength and surface area to effectively protect HTS (high temperature shift) catalysts, such as ShiftMax™ 120 and ShiftMax 120 HCF, from upstream waste heat boiler leakages. Typically, a layer of 5-10% ShiftGuard 100 is installed on top of the main HTS catalyst bed to protect it from foreign material, such as dust, water droplets or salts. The guard material also inhibits the formation of a crusted layer on the catalyst bed, and prevents crushing of downstream catalysts.

ShiftMax™ 120 HCF is a high temperature shift (HTS) catalyst that combines high activity and thermal stability with extreme robustness, enabling it to withstand potential boiler leakages. With virtually no hexavalent chromium (Cr6+), it eliminates health or safety risks in handling or commissioning.ShiftMax 120 HCF offers the same outstanding benefits as ShiftMax™ 120, and performs identically after initial reduction. Both HTS syngas catalysts effectively prevent Fischer-Tropsch by-product formation at low steam-to-gas conditions.

Steam reforming, also called primary reforming, is at the heart of the reforming process. The selection of the optimal catalysts depends on several factors including furnace design, severity of service and the type of hydrocarbon processed. Common catalysts for this process are the ReforMax 200 LDP, ReforMax 250 and ReforMax 330 LDP.ReforMax 250 is a high performance catalyst for the steam reforming of hydrocarbon feedstocks from Naphtha.

ReforMax™ 100 is a highly active and stable nickel-based pre-reforming catalyst that is designed to handle the entire range of hydrocarbon feedstocks – from natural gas to LPGs and naphthas. It effectively protects the downstream steam reforming catalyst and tubes, thus extending their lifetimes.ReforMax 100 also offers the option of increasing overall plant capacity, and allows operation at lower steam-to-carbon ratios. The robust tablet structure of our pre-reforming catalyst significantly improves pressure drop stability. In addition to ReforMax 100, we also offer a pre-reduced and stabilized version, ReforMax™ 100RS.

MegaMax™ 800 is a next-generation methanol synthesis catalyst that offers much higher activity than previous solutions – even at very low reactor temperatures and pressures. It also provides superior selectivity towards methanol production, as well as excellent stability and poison tolerance.Thanks to its outstanding performance, MegaMax 800 enables a long lifetime of productivity and improved energy efficiency in comparison to standard methanol synthesis catalysts. The catalyst is suitable for large or small production units, and can be run with a variety of methanol production technologies.

ReforMax™ 100 RS is the pre-reduced and stabilized version of our highly active and stable pre-reforming catalyst, ReforMax™ 100. It is recommended in case of plant limitations regarding proper activation or reduction of the catalyst during start-up, and can greatly simplify and speed up the process.As with ReforMax 100, our pre-reduced version offers great flexibility in the choice of feedstock – from natural gas to LPGs and naphthas. Likewise, it extends the lifetime of the downstream steam reforming catalyst, and offers the options of increasing overall plant capacity, or operating at lower steam-to-carbon ratios.

ReforMax™ 210 LDP is a potassium-promoted nickel-based catalyst for steam reforming of hydrocarbon feedstocks ranging from NG to LPG in the production of ammonia, hydrogen and methanol. The catalyst offers high activity and outstanding strength in a 10-hole ring shape that ensures low pressure drop.ReforMax 210 LDP is typically loaded in the reformer tubes as the top layer (30-50%) on an un-promoted catalyst such as ReforMax 330 LDP. This way, the steam reforming catalyst provides added insurance against coking during plant startups, sudden feed changes, or other critical situations. Based on more than 60 years of expertise in catalysis, Clariant’s ReforMax series of syngas catalysts is commercially proven to be highly effective for a variety of feed conditions and process designs.

ReforMax™ 117 RR is a nickel-based catalyst for the dissociation of ammonia in off-gas. The catalyst’s ribbed rings provide great stability, protecting it from the extreme temperatures needed for dissociation. Due to its enhanced surface area, ReforMax 117 RR also offers outstanding activity.Based on more than 60 years of expertise in catalysis, Clariant’s ReforMax series of syngas catalysts is commercially proven to be highly effective for a variety of feed conditions and process designs.

OxyMax™ PA catalysts offer high performance in selective oxidation of o-xylene, naphthalene and mixed feedstocks to phthalic anhydride (PA). They are produced with Clariant’s proprietary fluid-bed coating process. Proprietary promotors optimize activity and selectivity in a multi-layer catalyst design. This enables catalyst solutions to be tailored to individual plant operating conditions and needs.

METH™ 150 is a methanation catalyst that offers high activity at extremely low temperatures (below 170°C) for the removal of CO in ammonia synthesis or syngas production. Comprised of ruthenium on an alumina support, the catalyst efficiently converts carbon oxides to methane via hydrogenation.

METH™ 134 is a highly active methanation catalyst that efficiently converts carbon oxides to methane through hydrogenation. The alumina-supported nickel(II)oxide catalyst is operated above 200°C, and well suited for standard methanation applications in ammonia synthesis or syngas production.

NiSat™ is a series of highly selective catalysts for hydrogenation, hydro-finishing, and fuel or distillate upgrading. It is used in numerous applications including the production of caprolactam, methylbutanol, and cyclohexane, or in the hydrogenation of acetone to isopropanol. The fixed-bed types are ideal for removing aromatic compounds or carboxyl groups, while the powders are best for slurry processes, such as conversion of nitriles to amines, or hydrogenation of resins and rosins. All NiSat hydrogenation catalysts are available as oxides, or in a reduced and stabilized form. The latter form significantly reduces start-up times, thus improving overall plant output.

HyMax™ is a series of copper-chromite hydrogenation catalysts that offer high acid stability for selective conversion of aldehydes, ketones or esters to the corresponding alcohols. The catalysts are ideal for liquid and trickle-bed hydrogenation, and can be applied in selected gas phase processes.Typical applications for our robust copper-chromite catalysts include liquid-phase production of fatty-alcohol or oxo-alcohol, as well as amines. HyMax hydrogenation catalysts are supplied as tablets or in powder form, and available as oxides, or reduced and stabilized under liquid (e.g. decanol).

HySat™ is a series of chromium-free copper catalysts for hydrogenation of ketones, aldehydes or esters to the corresponding alcohols. The broad range includes copper-zinc, copper-alumina and copper-bismuth catalysts suitable for fixed-bed or slurry hydrogenation processes. The HySat series’ excellent performance is commercially proven for the production of oleochemicals, butane-diol, hexane-diol or oxo-alcohol. The catalysts’ highly dispersed copper crystallites ensure high activity, while their structural promoters increase selectivity and lifetime, as well as inhibit deactivation effects, such as sintering.HySat hydrogenation catalysts are available as powder catalysts, or as tablets for fixed-bed processes. Thanks to a choice of tablet sizes, and the catalysts’ high mechanical stability, producers benefit from low pressure drop, and extended change-out cycles. Selected products are available in reduced and stabilized form, which significantly shortens start up times, thus increasing overall plant output.

The HyProGen™ 280 comprises of reforming catalysts tailor-made for fuel cell applications. The precious-metal-based catalysts combine excellent activity with high tolerance to start-stop and oxidation cycles. They also offer high resistance to poisons and very low ammonia production. Learn more about our comprehensive catalyst portfolio for fuel cell technologies > MORE

METH™ 135 is a methanation catalyst with a higher nickel content which provides enhanced activity at low temperatures, and is suitable for higher space velocities. Composed of nickel(II)oxide on an alumina support, the catalyst enables high product purity in ammonia synthesis or syngas production.

HDMax™ 300 is a nickel-molybdenum-based catalyst for hydrodesulfurization of all types of hydrocarbon feedstock, such as naphtha, LPG, natural gas and off-gases, in the liquid or gas phase. The catalyst is also effective in hydrogenation of organic nitrogen compounds as well as olefin saturation.

HDMax™ 200 is a cobalt-molybdenum-based catalyst for hydrodesulfurization of all types of hydrocarbon feedstock, such as naphtha, LPG, natural gas and off-gases. The catalyst is suitable for both liquid- and gas-phase applications.

Wax emulsion out of copolymer wax.

ActiSorb™ 405 is a promoted alumina-based catalyst for the purification of syngas and natural gas through hydrolysis of COS and CS2. Thanks to its special promoter, high surface area and optimum porosity, ActiSorb offers excellent activity for efficient syngas purification.

ActiSorb™ O is a catalyst designed for effective oxygen (O2) removal in syngas. The catalyst is suitable for the purification of all types of hydrocarbon feedstocks, and capable of reducing oxygen to non-detectable levels.

ActiSorb™ GP 300 adsorbents offer excellent performance for the removal of arsine contamination from gas- or liquid-phase hydrocarbon streams. The series includes a variety of arsine adsorbents for different operating conditions, which can be used as drop-in replacements without any modification.

ActiSorb™ 410 simultaneously promotes COS hydrolysis and CS2 hydrogenation, while also hydrolyzing HCN. The catalyst’s high selectivity allows purification of syngas with very high CO content. The feed to the COS hydrolysis reactor may contain metal carbonyls, which must be removed using ActiSorb 400.

Pharmasorb™ is a highly refined, pulverized attapulgite clay designed for use in pharmaceutical and cosmetic applications. Available as Pharmasorb Colloidal and Pharmasorb Regular. It is produced under Current Good Manufacturing Practice (cGMP) guidelines and certified to meet the United States Pharmacopeia (USP) and the British Pharmacopeia (BP).

Clariant offers a wide range of specialty products based on bentonite clays.Ranging from pharmaceutical ingredients to rubber processing, a plethora of industries and applications benefit from the unique properties of this remarkable material.Our specialty products include:TERRANA™ bentonite powders, which are applied in the purification processes for both waste water treatment and drinking water preparation.CERATOSIL™ /CERATOFIX™ materials which help the ceramic, rubber and plastics industry to improve quality and production efficiency.

Zeolites are aluminosilicate crystals. Their unique structures consist of well-defined channels and pores. These channels make zeolites an excellent choice for a variety of applications in catalysis and adsorption depending upon needs.Clariant is one of the world’s largest producers of specialty zeolite powders for chemical and environmental applications. We have development and manufacturing capabilities for virtually any type of zeolite, including modifications to standard zeolites or new developments.

Zeolites are aluminosilicate crystals. Their unique structures consist of well-defined channels and pores. These channels make zeolites an excellent choice for a variety of applications in catalysis and adsorption depending upon needs.Clariant is one of the world’s largest producers of specialty zeolite powders for chemical and environmental applications. We have development and manufacturing capabilities for virtually any type of zeolite, including modifications to standard zeolites or new developments. For additional information on this zeolite please contact our product specialists.

HyProGen 310 demonstrate very high activity when compared to conventional Low-Temperature Shift (LTS) catalyst used in the syngas industry. High-performance low-temperature shift (LTS) catalyst at 200–300 °C. The HyProGen 310 is tailored for fuel cell applications in terms of shape and performance requirements. Learn more about our comprehensive catalyst portfolio for fuel cell technologies > MORE

Motusflex HV is a high viscosity rheology modifier & synthetic polymer used as a gelling agent for aqueous systems and as a texturizer and thickener for oil-in-water emulsions. Motusflex HV provides formulations with excellent yield value, corresponding to superior stability even in the absence of additional emulsifier. This product has a good compatibility with APIs and organic solvents (ethanol, acetone) and is stable towards UV radiation and high shear stress.

Motusflex MF is a multi-functional rheology modifier & synthetic polymer which offers the solution for complex skin formulations – a true partner which suits your specific requirements. Motusflex™ MF is ready to use and easy to add at any formulation stage as it disperses quickly in the water or oil phase. It is easy to add Motusflex MF at any formulation step (oil or water phase) and cold processable.

Motusflex LV is a low viscosity rheology modifier & synthetic polymer. Motusflex LV consists of a large, hydrophilic portion and a smaller hydrophobic portion. This chemical structure allows this copolymer to function as primary emulsifier and stabilizer in oil-in-water emulsions. This is done as the hydrophobic portion adsorbs at the oil-water interface, and the hydrophilic portion swells in the water phase to provide exceptional emulsion stability to a broad range of oils. In combination with other polymers like Motusflex HV, Motusflex LV can be used to modify skin rheology and texture, improve pick up as well as to reduce the total amount of required thickener. It is indicated for low-viscosity formulations like lotions, wet wipes, sprayable formulations, hot and cold O/W formulations with an elegant and rich skin after-feel.

Encapsogen® Fresh is a superior malodor counteracting technology which is more effective than other malodor capture technologies on the market. It has been extensively tested against a broad range of odours e.g. urine, faeces, vomit, sweat, kitchen smells, wet dog, etc. Encapsogen® Fresh effectively captures malodors and pollutants and can partially neutralize allergens, enabling a prolonged and more consistent fragrance experience.

Licolub PED 1602 powder is an oxidized, high density polyehtylene wax with high molecular weight and high viscosity.

Zeotypes are aluminosilicate and phosphorous-containing crystals. Their unique structures consist of well-defined channels and pores. These channels make them an excellent choice for a variety of applications in catalysis and adsorption.Clariant is one of the world’s largest producers of specialty zeolite and zeotype powders for chemical and environmental applications. We have development and manufacturing capabilities for virtually any type of zeolite, including modifications to standard zeolites or new developments.In process catalysts, SAPO-11 (AEL) zeolites are widely used in:Fuels upgradingIsomerization processesFor adsorption purposes, they are used in:Active carbon replacement Clariant's standard powder is CZA.

Licocene PE 5401 granules is a medium viscous, high melting point Metallocene catalyzed Polyethylene wax.

Attasorb product is a granular, thermally-activated Attapulgite designed for use mainly in agricultural sorbent applications. Available as a low volatile matter (LVM), or regular volatile matter (RVM). The RVM products have a high level of sorptivity and an intermediate level of particle strength. The LVM products have good sorptivity and a high level of particle strength. Attasorb sorbents are available in a wide range of particle sizes and packaging to maximize end-use versatility.

Microsorb™ attapulgite is effective as a filtration aid and sorbent in various applications. Available as low volatile matter (LVM), or regular volatile matter (RVM), thermally activated, granular, or powdered grades. Can be used as dry flow aids, carriers, diluents, sorbents, and filter aids.

Micronized polyethylene for use in single pigment concentrates

Polyglykol 8000 PF is a milled PEG excipient grade powder product with a fine particle size distribution, produced under IPEC GMP conditions.The powder form supports the homogeneous mixing with other materials within production.The fine particle size distribution supports granulation and compressing processes. It is specified according to the requirements of the main international ICH guidelines and monographs (see below). * only in combination with a Pharma CoA

Lanogen™ 1500 is a mixture of Polyglykol 300 and 1500 in a 50 :50 ratio, which is produced under IPEC GMP conditions. It is specified according to the requirements of the main international ICH guidelines and monographs (see below). This ready-made mixture eases the production of ointments.

Polyglykol 3350 PSR is a sprayed PEG API grade powder product, with a coarse particle size distribution. It is produced under ICH Q7 conditions and GMP certified by the German authorities. The powder form supports the homogeneous mixing with other powder materials within production resulting into powder mixtures with improved flowability. It is specified according to the requirements of the main international ICH guidelines and monographs (see below).With its low Ethylene oxide and Dioxane specification limits special formulation requirements could be fulfilled.

Polyglykol 10000 S is a flaked PEG excipient grade product, produced under IPEC GMP conditions. The flaked form enables easier handling of the material within production. It is specified according to the requirements of the main international ICH guidelines and monographs (see below). * only in combination with a Pharma CoA

Polyglykol 35000 S is a flaked PEG excipient grade product, produced under IPEC GMP conditions. The flaked form enables easier handling of the material within production. It is specified according to the requirements of the main international ICH guidelines and monographs (see below). * only in combination with a Pharma CoA

Polyglykol 12000 S is a flaked PEG excipient grade product, produced under IPEC GMP conditions. The flaked form enables easier handling of the material within production. It is specified according to the requirements of the main international ICH guidelines and monographs (see below). * only in combination with a Pharma CoA

Polyglykol 20000 P is a milled PEG excipient grade powder product, produced under IPEC GMP conditions. The powder form supports the homogeneous mixing with other materials within production. It is specified according to the requirements of the main international ICH guidelines and monographs (see below). * only in combination with a Pharma CoA

Polyglykol 3350 PS is a sprayed PEG API grade powder product, with a mean particle size distribution. It is produced under ICH Q7 conditions and GMP certified by the German authorities. The powder form supports the homogeneous mixing with other powder materials within production resulting into powder mixtures with improved flowability. It is specified according to the requirements of the main international ICH guidelines and monographs (see below).

Polyglykol 3350 PSE is a sprayed PEG API grade powder product, with a mean particle size distribution. It is produced under ICH Q7 conditions and GMP certified by the German authorities. The powder form supports the homogeneous mixing with other powder materials within production resulting into powder mixtures with improved flowability. It is specified according to the requirements of the main international ICH guidelines and monographs (see below).With its low Ethylene oxide and Dioxane specification limits special formulation requirements could be fulfilled.

Polyglykol 3350 PS is a sprayed PEG API grade powder product, with a coarse particle size distribution. It is produced under ICH Q7 conditions and GMP certified by the German authorities. The powder form supports the homogeneous mixing with other powder materials within production resulting into powder mixtures with improved flowability. It is specified according to the requirements of the main international ICH guidelines and monographs (see below).

Polyglykol 3350 P is a milled PEG API grade powder product, produced under ICH Q7 conditions with GMP certification by the German authorities.The powder form supports the homogeneous mixing with other materials within production. It is specified according to the requirements of the main international ICH guidelines and monographs (see below). * only in combination with a Pharma CoA

Polyglykol 1500 fl is a pasty PEG excipient grade product, produced under IPEC GMP conditions. It is specified according to the requirements of the main international ICH guidelines and monographs (see below). * only in combination with a Pharma CoA

Polyglykol 1500 S is a flaked PEG excipient grade product, produced under IPEC GMP conditions. The flaked form enables easier handling of the material within production. It is specified according to the requirements of the main international ICH guidelines and monographs (see below). * only in combination with a Pharma CoA

Polyglykol 3000 P is a milled PEG excipient grade powder product, produced under IPEC GMP conditions. The powder form supports the homogeneous mixing with other materials within production. It is specified according to the requirements of the main international ICH guidelines and monographs (see below). * only in combination with a Pharma CoA

Polyglykol 3350 S is a flaked PEG API grade powder product, produced under ICH Q7 conditions with GMP certification by the German authorities.The flaked form enables easier handling of the material within production. It is specified according to the requirements of the main international ICH guidelines and monographs (see below). * only in combination with a Pharma CoA

Polyglykol 3000 S is a flaked PEG excipient grade product, produced under IPEC GMP conditions. The flaked form enables easier handling of the material within production. It is specified according to the requirements of the main international ICH guidelines and monographs (see below). * only in combination with a Pharma CoA

Polyglykol 2000 S is a flaked PEG excipient grade product, produced under IPEC GMP conditions. The flaked form enables easier handling of the material within production. It is specified according to the requirements of the main international ICH guidelines and monographs (see below). * only in combination with a Pharma CoA

Polyglykol 4000 PF is a milled PEG excipient grade powder product with a fine particle size distribution, produced under IPEC GMP conditions. The powder form supports the homogeneous mixing with other materials within production. The fine particle size distribution supports granulation and compressing processes. It is specified according to the requirements of the main international ICH guidelines and monographs (see below). * only in combination with a Pharma CoA

Polyglykol 4000 P is a milled PEG API grade powder product, produced under ICH Q7 conditions with GMP certification by the German authorities.The powder form supports the homogeneous mixing with other materials within production. It is specified according to the requirements of the main international ICH guidelines and monographs (see below). * only in combination with a Pharma CoA

Polyglykol 6000 PF is a milled PEG excipient grade powder product with a fine particle size distribution, produced under IPEC GMP conditions.The powder form supports the homogeneous mixing with other materials within production. The fine particle size distribution supports granulation and compressing processes. It is specified according to the requirements of the main international ICH guidelines and monographs (see below). * only in combination with a Pharma CoA

Polyglykol 8000 S is a flaked PEG excipient grade product, produced under IPEC GMP conditions. The flaked form enables easier handling of the material within production. It is specified according to the requirements of the main international ICH guidelines and monographs (see below). * only in combination with a Pharma CoA

Polyglykol 8000 P is a milled PEG excipient grade powder product, produced under IPEC GMP conditions. The powder supports the homogeneous mixing with other materials within production. It is specified according to the requirements of the main international ICH guidelines and monographs (see below). * only in combination with a Pharma CoA

Polyglykol 4000 PS is a sprayed PEG API grade powder product, with a mean particle size distribution. It is produced under ICH Q7 conditions and GMP certified by the German authorities. The powder supports the homogeneous mixing with other powder materials within production. It is specified according to the requirements of the main international ICH guidelines and monographs (see below).

Polyglykol 6000 S is a flaked PEG excipient grade product, produced under IPEC GMP conditions. The flaked form enables easier handling of the material within production. It is specified according to the requirements of the main international ICH guidelines and monographs (see below). * only in combination with a Pharma CoA

Polyglykol 3350 PST is a sprayed PEG API grade powder product, with a fine particle size distribution. It is produced under ICH Q7 conditions and GMP certified by the German authorities. The powder form supports the homogeneous mixing with other powder materials within production resulting into powder mixtures with improved flowability. It is specified according to the requirements of the main international ICH guidelines and monographs (see below).With its low Ethylene oxide and Dioxane specification limits special formulation requirements could be fulfilled.

Polyglykol 4000 S is a flaked PEG API grade powder product, produced under ICH Q7 conditions with GMP certification by the German authorities.The flaked form enables easier handling of the material within production. It is specified according to the requirements of the main international ICH guidelines and monographs (see below). * only in combination with a Pharma CoA

Polyglykol 20000 S is a flaked PEG excipient grade product, produced under IPEC GMP conditions. The flaked form enables easier handling of the material within production. It is specified according to the requirements of the main international ICH guidelines and monographs (see below). * only in combination with a Pharma CoA

PEG 400 is described by the FDA as a possible demulcent in Ophthalmic Drug Products1. Polyglykol 400 J is a low molecular weight polyethylene glycol API type, which is produced under ICH Q7 GMP conditions, certified by the German authorities. With defined microbiological & endotoxin checks of the final packed product batch, which are given individually on the certificate of analysis, we would like to support you in your individual formulation risk assessment. 1. FDA, Final Administrative Order OTC000023, “Over-the-Counter Monograph 018: Ophthalmic Drug Products for Over-the-Counter Use,” Section M018.12(d)(3) (available at: https://dps.fda.gov/omuf/monographsearch/monograph_m018).

Polyglykol 1000 is a pasty PEG excipient grade product, produced under IPEC GMP conditions. It is specified according to the requirements of the main international ICH guidelines and monographs (see below).Pharmacopoeia name: USP-NF: Polyethylene glycol 1000, Ph. Eur.: Macrogol 1000 * only in combination with a Pharma CoA

Polyglykol 300 is a liquid PEG excipient grade product, produced under IPEC GMP conditions. It is specified according to the requirements of the main international ICH guidelines and monographs (see below). * only in combination with a Pharma CoA

Polyglykol 600 is a liquid PEG excipient grade product, produced under IPEC GMP conditions. It is specified according to the requirements of the main international ICH guidelines and monographs (see below). * only in combination with a Pharma CoA

Polyglykol 400 is a liquid PEG excipient grade product, produced under IPEC GMP conditions.It is specified according to the requirements of the main international ICH guidelines and monographs (see below). * only in combination with a Pharma CoA

Polyglykol 200 USP is a liquid PEG excipient grade product, produced under IPEC GMP conditions. It is specified according to the requirements of the main international ICH guidelines and monographs (see below).

VitiPure M 2000 PE is a pelletized MPEG product, produced under DIN ISO 9001 conditions. This product has been developed to serve the needs of customers working in liposomal or protein pegylation type of drug delivery solutions. Being typically used as starting raw material for development of PEG-lipids or for activated PEGs for protein pegylation, the specification of VitiPureTM M 2000 PE has been already extended including also USP-NF aspects to fulfill the purity requirements.Chemical name: Methyl polyglycol, average molar mass 2000 g/mol

The HDMax 230 catalyst is used in Claus process plants to recover sulfur from off-gases. This tail-gas treater also promotes the hydrolysis of carbonyl sulfide (COS) and the hydrogenation of sulfur oxides (SOx) to hydrogen sulfide (H2S) at very low operating temperatures.Clariant's range of Claus tail gas treatment (TGT) catalysts also has numerous commercial references for HDMax 213 and HDMax 214, which can be used for higher operating temperatures (around 250°C).

Praepagen WK 85 is a raw material used in the paint and specialities industry.

Praepagen WK-V is used as an additive for organophilic bentonite thickeners.

Coconut fatty acid ethoxylate with 10 moles EO.

GENAMIN C 200 is an ethoxylated coconut fatty acid amine used as an emulsifier in various industrial applications. It is a brownish clear liquid with a density of 1.04 g/cm³ at 50°C and a viscosity of approximately 70 mPa.s at 50°C. It is soluble in water and has a pH of 9.0 – 11.0 in a 1% aqueous solution.

Genapol PF 20 is used as nonionic emulsifier for the emulsion polymerization of monomers like acrylates, styrene-acrylates and vinyl acetate.

HOSTAPHAT OPS 75 E is an aqueous, ethanolic solution of alkane phosphonic acid used as a solubilising and dispersing agent in the detergent and paints & coatings industries.

Genamin S 200 is used as an emulsifier and dispersing agent for wax emulsions, bitumen emulsions, and crop protection.

Genamin S 100 is used as an emulsifier, wetting and dispersing agent in mineral oil emulsions, adhesives, paints & coatings, construction, crop protection, and other technical applications. It performs preferably under neutral and acidic conditions forming a cationic surfactant.

Dispersogen™ LFH is an excellent surfactant based dispersing agent. It maintains its dispersion power in high electrolyte environments and it exhibits good emulsification properties.

Emulsogen™ ELO 200 is an emulsifier which is derived from modified castor oil ethoxylate with very good emulsification properties for natural oils, their methyl esters and mineral oils. It has an excellent tox-/ecotox profile and requires no hazardous labeling. It is specially indicated for formulations containing hydrolytically unstable active ingredients.

Emulsogen™ IT is a ready to use emulsifier mixture of a non-ionic and an anionic surfactant.

Genamin T 080 is a medium EO range tallow amine ethoxylate highly compatible with high-load formulations of Glyphosate.

Hostapon TPHC is a solid dispersing and wetting agent with an excellent performance profile. It can be used in liquid and solid formulations and is especially recommended for use in soluble and dispersible granules.

Extremely low foaming surfactant with excellent chemical and thermal stability. Especially suitable for high alkaline powder cleaners.

Emulsogen 607 is a low HLB emulsifier used as a W/O emulsifier and as a coemulsifier in combination with hydrophilic emulsifiers for the manufacture of O/W emulsions. Emulsogen 607 is particularly suitable for the production of waterin-oil emulsions. Paraffin oils as well as natural and synthetic fatty acid esters and triglycerides can be processed as oil components.

By the addition of 2-3 wt.-% Emulsogen OGP in combination with nonionic emulsifiers like Emulsogen™ M in metal working fluids based on paraffinic mineral oil, concentrate and emulsion stability are improved. Emulsogen OGP is used for the manufacture of high viscous to paste-like water-in-oil emulsions based on mineral oils, petrolatum, fatty acid esters, etc.

Polyglykol D12/150 is a polyalkylene glycol (PAG) to be used as a synthetic base fluid for high performance lubricants with low friction coefficients, excellent wear properties and good thermal stability.

Polyglykol 4000 PF is a polethylene glycol with a mean molecular weight of 4000. It is a solid in fine powder form.

AddWorks PKG 184 is a pure blend of a vegetable based ethoxylated alkyl amine which provides highly effective long-term antistatic properties and an erucamide which provides slip properties to thermoplastic polymers.

Genapol SA 120 is a nonionic, ethoxylated alcohol with excellent degreasing properties making it suitable for immersion and ultrasonic cleaning applications. Good compatibility with aqueous bases makes it stable in high caustic-loading formulations, while a high cloud point further increases formulation flexibility.

Genapol A 55 is an ethoxylated alcohol used as an emulsifying, low foaming surfactant in metal cleaning formulations. It offers improved emulsification and solvency over typical linear or branched alcohol ethoxylates.

Hostagliss NDC is a polyol ester and used as synthetic base fluid in rolling oils or lubricating component for cutting & grinding fluids.

Hostagliss EHS is a polyol ester and used as synthetic base fluid and lubricating component for rolling fluids, cutting & forming fluids and fire resistant hydraulic fluids.

Hostagliss EFP is a polyol ester and used as synthetic base fluid in rolling oils or lubricating component for cutting & grinding fluids.

Hostagliss L6 is a complex ester and used as lubricity improver for milky, semisynthetic and neat oil metalworking fluids. Furthermore it is used as synthetic base fluid for rolling emulsions.

Polyglykol B01/20 is a polyalkylene glycol (PAG) to be used as synthetic base fluid in high performance lubricants with low friction coefficients, excellent wear properties and good thermal stability.

Polyglykol D21/100 is a polyalkylene glycol (PAG) to be used as synthetic base fluid in high performance lubricants with low friction coefficients, excellent wear properties and good thermal stability.

Polyglykol B01/240 is a polyalkylene glycol (PAG) to be used as synthetic base fluid for high performance lubricants with low friction coefficients, excellent wear properties and good thermal stability.

Polyglykol B01/120 is a polyalkylene glycol (PAG) to be used as synthetic base fluid for high performance lubricants with low friction coefficients, excellent wear properties and good thermal stability.

Polyglykol B01/100 is a polyalkylene glycol (PAG) to be used as synthetic base fluid in high performance lubricants with low friction coefficients, excellent wear properties and good thermal stability.

Hostagliss TPO-V is a polyol ester and used as synthetic base fluid and lubricating component for rolling fluids, cutting & forming fluids and fire resistant hydraulic fluids.

Hostagliss TPO-V 68 is a polyol ester and used as synthetic base fluid and lubricating component for rolling fluids, cutting & forming fluids and fire resistant hydraulic fluids.

TONSIL ™ APT series catalysts have their basis on the expertise which was gained with the TONSIL™ CO series. The Tonsil APT series has multiple products for each process to meet the different requirements in terms of activity and selectivity. Generally, Tonsil catalysts contain less side reaction active sites and have high surface area and superior pore properties. Those properties ensure the long cycle time of Tonsil catalysts, thus reduce the number of change outs and operation cost, increase the operation efficiency and reduce energy consumption. Clariant has gained now also with APT series years of experience in aromatics treatment. TONSIL™ APT series has several advantages over the TONSIL™ CO series. No sand grading is required - Loading procedure is less complex without sand grading Higher bulk density Longer cycle life Less start-ups and shut-downs Lower pressure drop Lower energy consumption Finally leads to lower CAPEX and OPEX over the whole year

TONSIL ™ APT series catalysts have their basis on the expertise which was gained with the TONSIL™ CO series. The Tonsil APT series has multiple products for each process to meet the different requirements in terms of activity and selectivity. Generally, Tonsil catalysts contain less side reaction active sites and have high surface area and superior pore properties. Those properties ensure the long cycle time of Tonsil catalysts, thus reduce the number of change outs and operation cost, increase the operation efficiency and reduce energy consumption. Clariant has gained now also with APT series years of experience in aromatics treatment. TONSIL™ APT series has several advantages over the TONSIL™ CO series. No sand grading is required - Loading procedure is less complex without sand grading Higher bulk density Longer cycle life Less start-ups and shut-downs Lower pressure drop Lower energy consumption Finally leads to lower CAPEX and OPEX over the whole year

TONSIL ™ APT series catalysts have their basis on the expertise which was gained with the TONSIL™ CO series. The Tonsil APT series has multiple products for each process to meet the different requirements in terms of activity and selectivity. Generally, Tonsil catalysts contain less side reaction active sites and have high surface area and superior pore properties. Those properties ensure the long cycle time of Tonsil catalysts, thus reduce the number of change outs and operation cost, increase the operation efficiency and reduce energy consumption. Clariant has gained now also with APT series years of experience in aromatics treatment. TONSIL™ APT series has several advantages over the TONSIL™ CO series. No sand grading is required - Loading procedure is less complex without sand grading Higher bulk density Longer cycle life Less start-ups and shut-downs Lower pressure drop Lower energy consumption Finally leads to lower CAPEX and OPEX over the whole year

TONSIL ™ APT series catalysts have their basis on the expertise which was gained with the TONSIL™ CO series. The Tonsil APT series has multiple products for each process to meet the different requirements in terms of activity and selectivity. Generally, Tonsil catalysts contain less side reaction active sites and have high surface area and superior pore properties. Those properties ensure the long cycle time of Tonsil catalysts, thus reduce the number of change outs and operation cost, increase the operation efficiency and reduce energy consumption. Clariant has gained now also with APT series years of experience in aromatics treatment. TONSIL™ APT series has several advantages over the TONSIL™ CO series. No sand grading is required - Loading procedure is less complex without sand grading Higher bulk density Longer cycle life Less start-ups and shut-downs Lower pressure drop Lower energy consumption Finally leads to lower CAPEX and OPEX over the whole year

TONSIL ™ CO series catalysts have been establishing an outstanding status around the world. The Tonsil series has multiple products for each process to meet the different requirements in terms of activity and selectivity. Generally, Tonsil catalysts contain less side reaction active sites and have high surface area and superior pore properties. Those properties ensure the long cycle time of Tonsil catalysts, thus reduce the number of change outs and operation cost, increase the operation efficiency and reduce energy consumption. Clariant has years of experience in aromatics treatment and is committed to continuously improve these materials to adapt them to the increasing requirements of the petrochemical industry.

TONSIL ™ CO series catalysts have been establishing an outstanding status around the world. The Tonsil series has multiple products for each process to meet the different requirements in terms of activity and selectivity. Generally, Tonsil catalysts contain less side reaction active sites and have high surface area and superior pore properties. Those properties ensure the long cycle time of Tonsil catalysts, thus reduce the number of change outs and operation cost, increase the operation efficiency and reduce energy consumption. Clariant has years of experience in aromatics treatment and is committed to continuously improve these materials to adapt them to the increasing requirements of the petrochemical industry.

TONSIL ™ CO series catalysts have been establishing an outstanding status around the world. The Tonsil series has multiple products for each process to meet the different requirements in terms of activity and selectivity. Generally, Tonsil catalysts contain less side reaction active sites and have high surface area and superior pore properties. Those properties ensure the long cycle time of Tonsil catalysts, thus reduce the number of change outs and operation cost, increase the operation efficiency and reduce energy consumption. Clariant has years of experience in aromatics treatment and is committed to continuously improve these materials to adapt them to the increasing requirements of the petrochemical industry.

TONSIL ™ CO series catalysts have been establishing an outstanding status around the world. The Tonsil series has multiple products for each process to meet the different requirements in terms of activity and selectivity. Generally, Tonsil catalysts contain less side reaction active sites and have high surface area and superior pore properties. Those properties ensure the long cycle time of Tonsil catalysts, thus reduce the number of change outs and operation cost, increase the operation efficiency and reduce energy consumption. Clariant has years of experience in aromatics treatment and is committed to continuously improve these materials to adapt them to the increasing requirements of thepetrochemical industry.

TONSIL ™ Jet Supreme adsorbents have been establishing an outstanding status around the world. TONSIL™ Jet Supreme has long-standing experience in the purification of kerosene and jet fuel. Typically TONSIL™ Jet Supreme is based after a Merox or Merichem unit and designed to fulfill jet fuel specifications for MSEP and JFTOT for very long cycle lives. Jet Supreme products will finally purify the kerosene and jet fuel from impurities like water, salts, surfactants, solid particles. Jet Supreme P will further remove or stabilize color.

TONSIL ™ Jet Supreme adsorbents have been establishing an outstanding status around the world. TONSIL™ Jet Supreme has long-standing experience in the purification of kerosene and jet fuel. Typically TONSIL™ Jet Supreme is based after a Merox or Merichem unit and designed to fulfill jet fuel specifications for MSEP and JFTOT for very long cycle lives. Jet Supreme products will finally purify the kerosene and jet fuel from impurities like water, salts, surfactants, solid particles. Jet Supreme P will further remove or stabilize color.

TONSIL ™ CO series catalysts have been establishing an outstanding status around the world. The Tonsil series has multiple products for each process to meet the different requirements in terms of activity and selectivity. Generally, Tonsil catalysts contain less side reaction active sites and have high surface area and superior pore properties. Those properties ensure the long cycle time of Tonsil catalysts, thus reduce the number of change outs and operation cost, increase the operation efficiency and reduce energy consumption. Clariant has years of experience in aromatics treatment and is committed to continuously improve these materials to adapt them to the increasing requirements of the petrochemical industry.

TONSIL ™ CO series catalysts have been establishing an outstanding status around the world. The Tonsil series has multiple products for each process to meet the different requirements in terms of activity and selectivity. Generally, Tonsil catalysts contain less side reaction active sites and have high surface area and superior pore properties. Those properties ensure the long cycle time of Tonsil catalysts, thus reduce the number of change outs and operation cost, increase the operation efficiency and reduce energy consumption. Clariant has years of experience in aromatics treatment and is committed to continuously improve these materials to adapt them to the increasing requirements of the petrochemical industry.

Red Phosphorus HB 801 (TP) is a stabilized and micro-encapsulated red phosphorus grade. Red Phosphorus HB 801 (TP) is a fine red powder that is insoluble in water and organic solvents.

Nipacide GRTp is an encapsulated biocide for dry-film preservation based on benzilisothiazolinone + iodopropylbutylcarbamate. Nipacide GRTp is a powerful, low toxicity biocide developed for complete dry film and coating materials protection. It is effective against a wide range of fungal and yeast species and exhibits some activity against Gram negative and Gram positives bacteria.

Nipacide CDZ is a dry film fungicide based on Carbendazim, available in powder form. Nipacide CDZ is recommended for a wide range of coating applications including water-based paints and wood coatings. It is effective against a wide range of fungal species, responsible for the discoloration and degradation of surface coatings.

Nipacide BNPD 20 is an in-can biocide based on Bronopol. Nipacide BNPD 20 is an aqueous solution recommended for preservation of a wide range of applications including Paints, varnishes, adhesives, emulsions (polymers), slurries, metal working fluids and home care products where the protection against bacteria and fungi is required in humid state (in can protection). Nipacide BNPD 20 is especially effective against bacteria including Pseudomonas sp. and sulphate reducing bacteria (SRB).

Nipacide DDI is an aqueous dispersion, dry film algaecide based on Diuron. Nipacide DDI is recommended for a wide range of coating applications including water basedpaints and wood coatings. It is effective against a wide range of algal species, responsible for the discoloration and degradation of surface coatings.

Nipacide CO 5 is an aqueous dispersion dry film fungicide based on Carbendazim, and Octyl isothiazolinone. Nipacide CO 5 is recommended for protection of a wide range of coating applications including water based decorative paints, wood stains and colours. It is effective against a wide range of fungal species, responsible for the discoloration and degradation of surface coatings. Nipacide CO 5 can be used over a wide pH and temperature range.

Nipacide BKX is an in-can biocide based on bronopol + chloromethyl and methylisothiazolinone. Nipacide BKX is a liquid, low toxicity biocide developed for the complete in-can protection of water-based products. Nipacide BKX is effective against a wide range of spoilage organisms and effective over a pH range of 4 to pH 8 and temperature below 40o C.

Nipacide CFX 5 is an in-can biocide based on formaldehyde + chloromethyl and methylisothiazolinone. Nipacide CFX 5 is a low toxicity biocide, developed for the complete protection of water based products. Nipacide CFX 5 is effective against bacteria, yeast and fungi. Nipacide CFX 5 is recommended for a wide range of applications including preservation of paints and varnishes, adhesives, emulsions (polymer), cutting fluids, where protection against bacteria and fungi is required in the wet state (In can protection). Nipacide CFX 5 is stable in the temperature range of 5°C to 40 °C and in the range of pH 4 to 10.0.

Nipacide BNPD is an in-can biocide based on Bronopol. Nipacide BNPD is recommended for preservation of a wide range of applications including Paints, varnishes, adhesives, emulsions (polymers), slurries, metal working fluids and home care products where the protection against bacteria and fungi is required in humid state (in can protection). Nipacide BNPD is especially effective against bacteria including Pseudomonas sp. and sulphate reducing bacteria (SRB).

Nipacide BK is an in-can biocide basen on Hexahydrotriazine (HHT). Nipacide BKI is a water based, liquid biocide specifically developed for the complete in-can microbiological protection of industrial water-based products against bacterial and fungal spoilage in the wet state. Nipacide BKI is effective against a wide range of microorganisms including gram positive and gram negative bacteria, yeast and fungi. It can be used over a pH range 6 - 10 and temperature range up to 60°C.

Genapol LA 080 is a nonionic, ethoxylated alcohol with excellent degreasing properties making it suitable for immersion and ultrasonic cleaning applications. Good compatibility with aqueous bases makes it stable in high caustic-loading formulations.

Genapol O 100 is a nonionic, ethoxylated alcohol with excellent degreasing and oil rejection properties making it suitable for immersion and ultrasonic cleaning applications. Good compatibility with aqueous bases makes it stable in high caustic-loading formulations.

Genapol PF 80 is used as nonionic emulsifier for the emulsion polymerization of monomers like acrylates, styrene-acrylates and vinyl acetate.

Genapol O 200 is a nonionic, ethoxylated alcohol surfactant and solubilizer. Its excellent degreasing and oil rejection properties make it suitable for immersion and ultrasonic cleaning applications. Compatibility with aqueous acids and bases makes it stable in a range of formulation types.

PREVOL Z-70 is a liquid foam control agent with very low silicone content for adhesives, coatings and inks based on synthetic latex emulsions.PREVOL Z-70 is very effective during the mixing, dispersing and milling processes. Due to its components, it is easily dispersed and acts immediately to release entrapped air in foam bubbles and to prevent undesired foam built-up. It maintains its efficiency during long periods of agitation.The recommended dosage is 2.4-3.2 kg of PREVOL Z-70 for 1000 liters of paint. This amount is sufficient to control the foam efficiently.In adhesives we recommend dosages between 1-2 % of Antimussol Z-70 based on the total latex solids.This defoamer can be used as it is or as a water dispersion.

PREVOL 1030 is a cost-efficient, 100% active, vegetable oil-based defoamer recommended for coatings applications, especially recommended in the manufacture of binders, paints, adhesives and pigment preparations.PREVOL 1030 can be added at any stage of the manufacturing process, and has a rapid foam knockdown and persistent antifoam performance even after long term coating storage. It shows a good compatibility with other components and has no impact on end-product appearance.PREVOL 1030 can be used as such or pre-dispersed in water. For the use as is, the dosage recommendation is 0.2 -0.4% based on the total formulation.

PREVOL 1040 is a cost-efficient, 100% active, vegetable oil-based foam control agent for coatings applications, PREVOL 1040 shows high performance, rapidly repressing foams. It may be added in any production process step and presents antifoam performance even after long periods of storage. It has good compatibility and does not interfere with the final product appearance.The recommended dosage of Antimussol V4 is 0.2 - 0.4% based on total formulation.

Genamin M 41/2000 is a random EO/PO copolymer end-capped with a primary amino group.

PREVOL DF is a cost efficient, 100% active and vegetable oil-based defoamer recommended for all types of waterborne architectural coatings.Typical applications are emulsion paints, paper coatings and water-based pigment preparations.PREVOL DF can be added at any stage of the manufacturing process. It has a rapid foam knockdown and persistent antifoam performance even after long term coating storage.Good compatibility and no impact on coating appearance. PREVOL DF dosage recommendation is 0.2 -0.4% based on the total formulation.

PREVOL P is a cost-efficient, 100% active oil-based defoamer recommended for all types of waterborne architectural coatings.PREVOL P is suitable for all coating types, can be added at any stage of the manufacturing process, and has a rapid foam knockdown andpersistent antifoam performance even after long term coating storage.Good compatibility and no impact on coating appearance.PREVOL P can be used as such or pre-dispersed in water. For the use as is, the dosage recommendation is 0.2 -0.4% based on the totalformulation.

PREVOL NS 22 is a liquid foam control agent for waterborne latex paints, adhesives, architectural paints and coatings. PREVOL NS 22 can be used as such or pre-dispersed in water.Dosage: 0.2 -0.5% based on the total formulation.

Hostastat HS 1 pills Zn is an alkane sulfonate which provides highly effective antistatic properties to thermoplastic polymers.

DESVOCANT helps to control and eliminate the accumulation of volatile organic compounds (VOCs) due to the off-gassing of products enclosed in packaging to fully-loaded shipping containers. It also helps to minimize the unpleasant odors associated with VOCs. Made from a naturally-occurring, bentonite clay mineral with a unique structure that is non-toxic.

Phenylsulfonat CA 62 is a versatile anionic emulsifier based on branched CaDDBS in iso-butanol. It is widely used in different agrochemical formulation types and especially recommended for ECs.

Exolit OP 935 Terra is chemicially and from its composition equivalent to Exolit OP 935, but comes with a mass balance certificate as for its production, renewable based Ethylene was sourced. Therefore we assume that for Exolit OP Terra products no additional performance testing and qualification compared to the standard grade are necessary. Exolit OP 935 Terra is a white, fine-grained powder based on an organic phosphinate. The product is not hygroscopic and it is insoluble in water and common organic solvents like acetone, dichloromethane, MEK, toluene. Exolit OP 935 Terra can easily be dispersed in solvents like acetone or MEK.For more details see our Innovation Spotlight video.

ActiSorb™ Hg 1 is highly effective for purifying hydrocarbon feedstocks and off-gases. It is also ideal for mercury removal in chlorine plants, and purification of hydrogen by-product in sodium amalgam decomposition and cell room ventilation air. In all cases, mercury is reduced to non-detectable levels.

ActiSorb™ GP 405 is an advanced mixed-metal adsorbent for the removal of elemental mercury from gas streams such as natural gas. Due to its high capacity for mercury, the adsorbent helps to lower operating costs and extend cycle lengths. Various options are available, all offering low pressure drop.

Polyglykol 2000 S is a polyethylene glycol with a mean molecular weight of 2000 g/mol. Product supplied in flakes form

Polyglykol 300 is a polyethylene glycol with a mean molecular weight of 300 g/mol.

Nipacide™ CI 15is a preservative for aqueous formulations.

Polyglykol 3350 P is a polyethylene glycol with a mean molecular weight of 3350 g/mol. Product supplied in powder form

Polyglykol 1000 is a polyethylene glycol with a mean molecular weight of 1000 g/mol.

Polyglykol 4000 S is a polyethylene glycol with a mean molecular weight of 4000 g/mol. Product supplied in flakes form.

Genagen C 100 is a non-ionic emulsifier derived from vegetable oil with good emulsification properties for Aromatic solvents.

Besides its use as an emulsifier, Genapol C 200 shows excellent Adjuvant properties in EC and SC formulations by enhancing performance in foliar applications.

Hostapur OSB is a solid alpha olefin sulfonate and especially suitable as anionic wetting agent for solid formulations

Nipacide™ BKX is a preservative for aqueous formulations.

Polyglykol 400 is a polyethylene glycol with a mean molecular weight of 400 g/mol.

Genapol EP 2564 is an alkoxylate wetting Agent which does not require a hazardous labeling

"Prevol™ is a silicon-free antifoaming agent suitable for EW and SL formulations. It is compatible with electrolytes and demonstrate good antifoaming performance in the presence of high foaming adjuvants and coformulants without negative impacts on storage stability. "

Genapol X 100 is a nonionic, ethoxylated alcohol with excellent emulsifying and degreasing properties making it suitable for immersion and ultrasonic cleaning applications. Good compatibility with aqueous acids and bases makes it stable in a range of formulation types.

Emulsogen™ MTP 030 is an excellent nonionic emulsifier based on vegetable fatty alcohol alkoxylate. It is soluble in many common oils and easy to formulate. The product is label free and does not require any hazardous labeling. Emulsogen™ MTP 030 also acts as adjuvant which improves the bioavailability of actives.

Genapol LA 030 is a wetting Agent in SC formulations and can also be used as a built-in Adjuvant or as a component of tank mix Adjuvants that can rapidly wet the plant surface and can improve penetration.

Emulsogen™ VO 13 is a label-free emulsifier and adjuvant based on an ethoxylated rapeseed oil. It can be used in different formulation types and is especially recommended to combine adjuvant and emulsifier functionality.

Emulsogen™ MTP 070 is an excellent nonionic emulsifier. It is soluble in many common oils and easy to formulate. The product is label free and does not require any hazardous labeling.

Genapol T 200 is a vegetable tallow alcohol-based emulsifier and is further successfully used as Adjuvant in SC formulations.

Dispersogen™ C 4020 is an anionic dispersant based on a modified polymeric carboxylate. It can greatly improve the stability of the product and effectively reduce the viscosity of formulations. It is suitable for different pesticide formulation types and suspensions of fertilizers.

Genapol ID 069 is 90% active content version of Genapol ID 060. It is a wetting Agent in SC formulations and can also be used as a built-in Adjuvant or as a component of tank-mix Adjuvants to increase wetting of the plant surface.

Genapol LA 090 is a readily biodegradable ethoxylate based on naturally derived lauryl alcohol.

Dispersogen™ LFS is the neutralized version of Dispersogen™ LFH. It maintains its dispersion power in high electrolyte environments and it exhibits good emulsification properties.

The Genapol UD products are ethoxylates based on a branched fatty alcohol. The products exhibit good wetting and low-foaming characteristics.

Genapol LA 070 is a readily biodegradable ethoxylate based on naturally derived lauryl alcohol.

Licocene PP 2502 GR is a low crystalline metallocene-technology based propylene-ethylene-copolymer.

Dispersogen IC 80 is a polymeric dispersing agent for water-based industrial coatings. It is particularly recommended for 1K acrylic direct-to-metal coatings, where it can stabilize the viscosity of the formulation.

GENAMIN O 050 is a substance used wetting agent in the paint industry.

Genamin LAP 100 D is a distilled lauryl propylene diamine used as a raw material in various industrial applications.

Nipacide CFX 3-IN is a water based biocide based on a combination of isothiazolinones and formaldehyde donor for the complete in-can and head space microbiological protection of industrial water based products against bacterial and fungal spoilage in the wet state. It demonstrates a broad spectrum of activity with fast action against microbial contamination in various applications.

Emulsogen™ B 43 is a high performing adjuvant and dispersing agent especially suitable for suspension concentrates of triketones like mesotrione.

Polyglykol 1500 S is a polyethylene glycol with a mean molecular weight of 1500 g/mol. Product supplied in flakes form.

Polyglykol 200 is a polyethylene glycol with a mean molecular weight of 200 g/mol.

Dispersogen™ 4133 is a unique polymer-based phosphate ester salt in water. It is especially recommended as emulsifier and dispersing agent for the stabilization of EW and SE formulations.

Nipacide™ BNPD 20 is a preservative for aqueous formulations.

Nipacide™ BIT 20 is the standard preservative for aqueous formulations.

Nipacide CI 15 R is a water based, non-formaldehyde biocide for the complete in-can protection of industrial water based products against bacterial and fungal spoilage in the wet state. It demonstrates a broad spectrum of activity with fast action against microbial contamination in various applications.

Polyglykol 6000 S is a polyethylene glycol with a mean molecular weight of 6000 g/mol.

Polyglykol 8000 S is a polyethylene glycol with a mean molecular weight of 8000 g/mol. Product is in flakes form.

The Genapol X products combine low-foam emulsification and wetting properties which make them the first choice for many NPE-free formulations as emulsifier, wetting Agent and Adjuvant.

The Genapol X products combine low-foam emulsification and wetting properties which make them the first choice for many NPE-free formulations as emulsifier, wetting Agent and Adjuvant.

Emulsogen™ MTP 090 is an excellent nonionic emulsifier. It is soluble in many common oils and easy to formulate. The product is label free and does not require any hazardous labeling.

Polyglykol 300 SG Vita is a polyethylene glycol with a mean molecular weight of 300 g/mol. This product is 100% bio-based with a fully segregated supply chain and a Renewable Carbon Index (RCI) of 100%.

Hostapur OS liq. Is an aqueous solution of an alpha olefin sulfonate and is used as anionic wetting agent in liquid formulations.

Nipacide™ BIT AS 40 is a high load water based preservative ideal for SC formulations.

Genapol 10500 VL is the liquid form of Genapol 10500 in water. It serves as an EO/PO block co-polymer dispersing agent for complex SC formulations. It improves wetting and adhesion contributing to bioefficacy.

Genapol CS 170 shows excellent adjuvant properties in EC and SC formulations by enhancing performance in foliar applications

Emulsogen™ SF 8 is an aqueous solution of a dioctyl sulfosuccinate and is mainly used as anionic wetting Agent.

Emulsogen™ T is an established emulsifier for vegetable oils which does not require a hazardous labeling

Genapol EP 0244 combines extremely low foaming tendency with very low surface tension making it a powerful wetting agent in demanding environments. The product does not require a hazardous labeling.

Genapol T 250 p is a vegetable tallow alcohol-based emulsifier and can be used as Adjuvant in liquid and solid formulations.

Genapol EP 2584 is an alkoxylate wetting Agent which does not require a hazardous labeling

Genamin T 050 is tallow amine ethoxylate with lower ethoxylation degree which is highly compatible with the Glyphosate potassium salt and high-load formulations of Glyphosate.

Dispersogen™ PL 40 is an anionic comb-shaped polymer dispersing agent which is highly effective at low concentrations and can e.g. be used to formulate highly stable SC formulations.

Dispersogen™ TP 160 T is the neutralized version of Dispersogen™ TP 160, showing both dispersing and emulsifier properties.

Genapol PN 30 is a versatile surfactant which acts as compatibilizer and stabilizes SC formulations

Hostaphat 2404 is used as an emulsifier for emulsion polymerization, specifically for alkyd and polyester resins.

Genagen CM 070 is a wetting Agent for agrochemical formulations, which is made by insertion ethoxylation of methyl fatty esters. In addition it shows Adjuvant properties as cuticular penetration enhancing agent.

Genapol T 250 P (INCI: Ceteareth-25) is an emulsifier and solubilizer for cosmetic use, based on fatty alcohol polyglycol ether derived from C16/C18 alcohol, saturated, with 25 mol EO.

Nipaguard DMDMH Plus is a preservative that is highly soluble in water. Nipaguard DMDMH Plus can be particularly effective in surfactant- based formulations, which can have some inherent antimicrobial activity, but which are susceptible to growth of some types of microorganisms.

Eclipsogen HOS is an effective UVB filter and excellent solubilizer for crystalline UV absorbers.

Licocene PPA 330 is an amorphous metallocene-technology based propylene-ethylene-copolymer.

Os absorventes de oxigênio Oxy-Guard™ Case Ready Meat foram especialmente formulados para proporcionar rapidez e eficiência na remoção do oxigênio presente em embalagens de carne pronta para consumo com o objetivo de manter um ambiente com baixo teor de oxigênio. A ausência de oxigênio protege a validade e a boa aparência das carnes, por retardar a oxidação química dos nutrientes, da cor, da gordura e do sabor e o crescimento de organismos aeróbios deteriorantes durante o transporte e a posterior distribuição.O Oxy-Guard™ Case Ready Meat é oferecido em uma variedade de tamanhos com base no tamanho da embalagem e no ar residual contido dentro da embalagem. Ele foi criado para remover o oxigênio das embalagens, de forma rápida e eficaz, e remover qualquer oxigênio residual ou impedir a entrada de oxigênio durante o transporte e o armazenamento.

Genamin T 01/5000 is a tri amine based on propoxylated glycerol with an average molecular mass of 5000 - 6000 g/mol. Genamin T 01/5000 contains terminal primary amine groups which can undergo all typical amine reactions.

ISOXYL™ EBI series catalyst are optimized for the isomerization of xylenes to an equilibrium mixture, while converting ethylbenzene to additional xylenes (rather than dealkylation). This ensures maximum feed utilization without creating benzene as a by-product. Thanks to an optimum balance between the zeolite’s protonic sites and the hydrogenation power of the noble metal function, the catalysts offer excellent selectivity for high conversion of ethylbenzene to paraxylene (PX). The former property reduces hydraulic load on the paraxylene separation section, while the latter improves plant economics by preserving aromatic rings. ISOXYL EBI catalysts are designed for convenient use as a drop-in replacement in existing units. Producers also benefit from the catalysts’ superior stability, extended service life, and simple regeneration via carbon burn-off.

H2Max™ catalysts are optimized for the purification of terephthalic acid (PTA) to remove impurities, such as 4-carboxybenzaldehyde (4-CBA). The process involves hydrogenation of colored by-products to water-soluble, colorless compounds in a fixed bed reactor. Thanks to the advanced design of our palladium-based catalysts, they ensure highly efficient purification of terephthalic acid, with 4-CBA content typically reduced to less than 20 ppm. The H2Max series is also a more economical solution, as it demonstrates significantly lower loss of costly palladium during operation compared to state-of-the-art catalysts. We offer a choice of PTA purification catalysts to suit different plant requirements:• H2Max™ 50: Classical grade PTA catalyst with reliable palladium retention• H2Max™ HD: Higher grade with enhanced palladium retention due to patented dispersion and distribution of the precious metal on the support structure

CATADIENE™ is a high-performance catalyst for selective dehydrogenation and dealkylation of hydrocarbons. Based on the Houdry process of catalytic cracking, CATADIENE technology and catalysts are used in butane-to-butadiene and isopentane-to-isoprene petrochemical processes. The reliable, proven process operates at vacuum conditions and lower reactor temperatures to maximize conversion of n-butane to n-butylenes and butadiene while minimizing costs. CATADIENE technology is exclusively licensed by our process partner, Lummus Technology, while the catalysts are solely produced and supplied by Clariant.

Genamin™ MTT is an alkaline pH neutralizing agent for low odor, waterborne paints, and emulsion polymerization. It is a cost-effective replacement for aminomethyl propanol. It can also be used as an alternative to ammonia, offering better performance in terms of pH stability, low odor, stable viscosity and wetting of pigments & fillers. The dosage recommendation (in supply form) is 0.1% - 03%.

Genamin A 016 is a cost-effective pH neutralizing agent for waterborne paints and emulsion polymerization. It is a suitable replacement for ammonia and other neutralizing agents such as aminomethyl propanol. Genamin A 016 meets all performance parameters in terms of pH stability, low odor, freeze-thaw stability, controlled color properties, controlled gloss and opacity, stable viscosity and scrub resistance. The dosage recommendation (in supply form) is 0.1% - 03%.