Absorption fluid
Genosorb™ 300
Data da edição :
fevereiro 06, 2026
Polyethylene glycol dialkyl ethers are well-established absorption fluids for scrubbing waste air and waste gas streams containing a variety of components, mostly solvents and acid gases.
Being mixtures ofhomologues , polyethylene glycol dialkyl ethers have average molecular masses. The higher molecular weight polyethylene glycol dialkyl ethers are thermally and chemically stable substances with low viscosities and low vapor pressures. They are excellent absorbents for AGR processes, mercaptane absorption and VOC abatement. In practice a large number of acid gas and waste gas purification plants are operated with Genosorb™. Gas streams ranging from 0.5 to > 500 000 Nm3/h are treated continuously.
Being mixtures of
Product Information
Benefícios
Product details
Funções dos produtos
- Solvent
- Gas absorption fluids
Aplicações
- Gas Absorbtion Fluids
| Molar mass | [g/mol] | 280 |
| Appearance | dark | |
| Boiling range at 1013mbar | [°C] | >250 |
| Vapour pressure at 20°C | [mbar] | <0.002 |
| Density at 20°C | [g/cm3] | 1.03 |
| Setting point | [°C] | -23 |
| Water absorbtion at 20°C | [%m/m] | ∞ |
| Solubility in water at 20°C | [%m/m] | ∞ |
| Viscosity at 20°C | [mm2/s] | 7 - 8 |
| Electrical conductivity at 25°C | [S/m] | 2*105 |
| Specific heat at 50°C | [J/g*K] | 2.13 |
| Thermal conductivity at 20°C | [W/m*K] | 0.1693 |
| Flash point (DIN 51758) | [°C] | 137 |
| Ignition point (DIN 51794) | [°C] | 210 |
Waste air purification, suitable for removal of e.g. solvents, e.g. chloronated hydrocarbons, ketones, esters.
The products Genosorb™ 300 and Genosorb™ 1843 were designed for scrubbing of VOCs such as alcohols, ketones, chlorinated and fluorinated hydrocarbons, aromatics, hydrocarbons etc.
They have proved successful in around 50 installations for VOC abatement around the world. Unlike incineration or adsorption, the Genosorb™ process allows recycling of valuable organic compounds from waste gases.
Genosorb™ 300 is a polyglycol dimethyl ether and physically absorbs polar VOCs like alcohols, aldehydes etc. It is completely miscible with water. It contains a stabilizer and tolerates acidic components in the gas stream
They have proved successful in around 50 installations for VOC abatement around the world. Unlike incineration or adsorption, the Genosorb™ process allows recycling of valuable organic compounds from waste gases.
Genosorb™ 300 is a polyglycol dimethyl ether and physically absorbs polar VOCs like alcohols, aldehydes etc. It is completely miscible with water. It contains a stabilizer and tolerates acidic components in the gas stream
