Exolit® AP 435
Ammonium Polyphosphate

Exolit® AP 435

Ammonium Polyphosphate

Data da edição :
maio 03, 2019

Exolit®  AP 435 is a fine-particle ammonium polyphosphate (phase II) optimized for low viscosity in aqueous suspension and intumescent coatings. The product is largely insoluble in water and completely insoluble in organic solvents. It is colourless, non-hygroscopic and non-flammable.

Benefícios
  • Optimized for low viscosity in aqueous suspension, low water solubility and low acid number
  • Non-halogenated flame retardant with favorable environmental and health profile
  • Particularly suitable as an ”acid donor” for intumescent coatings thanks to its low water solubility. Steel structures coated with intumescent paints can meet the requirements of fire resistance classes specified in EN, DIN, BS, ASTM and others. Their application on wood or plastics enables these materials to qualify for Building Material Class B (DIN EN 13501-1)
  • Imparts a good flame-retardant effect to adhesives and sealants when it is incorporated into the base formulation at the rate of 10 - 20%
  • Suitable non-halogenated flame retardant for polyurethane foams. PUR Foams with Exolit® AP 435 can be recycled
  • Excellent flame-retardant effect in cellulose-containing materials such as paper and wood products. With chipboard products, the DIN EN 13501-1 classification can be achieved by adding 15 - 20 % Exolit® AP 435
  • An essential component in intumescent formulations for thermoplastics, particularly polypropylene, for which the classification UL 94-V0 is specified for applications in the electrical sector
  • In the case of thermosets like epoxy resins and unsaturated polyester resins, it paves the way for the production of lightweight components with low solids content
  • (Bio-)degradable by breaking down to naturally occurring phosphate and ammonia
For regulatory details such as the classification and labeling as dangerous substances or goods please refer to our corresponding Material Safety Data Sheet.

Contact Us
Please contact us for safety and regulatory details or the Material Safety Data Sheet (MSDS).
Characteristics  Unit   Target value   DS¹) TD²) Test method 
Chemical Formula  [NH4PO3]n
n > 1000  

☐ 

Phosphorus  % (w/w)   31.0 - 32.0  

Photometry after oxidizing dissolution; (11/17)  
Water / Moisture  % (w/w)   max. 0.25  

Thermogravimetry at 130 °C; (11/03)  
Nitrogen  % (w/w)   14.0 - 15.0  

Elemental analysis; (11/07)  
Density  g/cm³   1.9  

at 25 °C  
Bulk Density 

g/cm³  

approx. 0.7  

Viscosity  mPa*s   max. 40  

at 25 °C in 10 % aqueous suspension  
pH Value  5-8             

Potentiometry in 10 % aqueous suspension; (11/12)  
Solubility in Water  % (w/w)   max. 0.5  

Gravimetry after filtration of a 10 % aqueous suspension at 25 °C; (11/41)  
Acid Number  mg KOH/g   max. 2              

Titration using alkali in 10 % aqueous suspension; (11/11)  
Decomposition Temperature  °C   > 275  

Initial evolution of ammonia  
Average Particle Size (D50)  µm   approx. 17              

Particle Size Distribution  % (w/w)  

Air jet sieving; (11/02)  
> 100 µm   max. 0.2 (DS)  
< 50 µm   min. 95 (TD)  
Weight Loss  % (w/w)  

350 °C   approx. 5  
450 °C   approx. 10    
550 °C   approx. 20    
¹) Delivery specification: The product is monitored on a regular basis to ensure that it adheres to the specified values. Test methods: Clariant method numbers 11/xx in brackets.
²) Technical data: The technical data are used solely to describe the product and are not subject to regular monitoring.  
Intumescent coatings
  • On account of its low water solubility, Exolit® AP 435 is particularly suitable as an ”acid donor” for intumescent coatings. Other essential components of intumescent systems include a binder, a carbon donor (e.g. pentaerythritol) and a blowing agent (e.g. melamine).
  • On exposure to flame, intumescent coatings form a carbonaceous foam which effectively shields the underlying material from temperature increases.
  • Steel structures coated with intumescent paints can meet the requirements of fire resistance classes specified in EN, DIN, BS, ASTM and others.
  • The application of Exolit® AP 435 based intumescent coatings on wood or plastics enables these materials to qualify for Building Material Class B (DIN EN 13501-1). 
  • Exolit® AP 435 imparts a good flame-retardant effect to adhesives and sealants when it is incorporated into the base formulation at the rate of 10 - 20 %.

Polyurethane foams 
  • Exolit® AP 435 is a suitable non-halogenated flame retardant for polyurethane foams. If handling of Exolit® AP 435 as a solid is not possible we recommend the dosage of the flame retardant by preparing an Exolit® AP 435 /polyol-suspension. Because of the low acid number of Exolit® AP 435, it is also possible to incorporate this flame retardant in an Exolit® AP 435/isocyanate suspension.
  • To prevent the solids from settling, the Exolit® AP 435 suspensions should be stirred or circulated by pump. The stirrers commonly found in service tanks are adequate for this purpose. 

Other applications 
  • Exolit® AP 435 has an excellent flame-retardant effect in cellulose-containing materials such as paper and wood products. With chipboard products, the DIN EN 13501-1 classification can be achieved by adding 15 - 20 % Exolit® AP 435.
  • Because of its high heat stability, Exolit® AP 435 is an essential component in intumescent formulations for thermoplastics, particularly polypropylene, for which the classification UL 94-V0 is specified for applications in the electrical sector.
  • Casting resins and composites based on epoxy resins or unsaturated polyester resins achieve the classification UL 94-V0 with Exolit AP 435. Combinations of  AP 435 with ATH show synergistic effects in UL94 and LOI tests.
Delivery form
White powder

Packaging
Exolit® AP 435 is packed in 25 kg 4-ply paper bags with polyethylene inliner. The standard supply unit is a shrink-wrapped pallet with 40 bags weighing 1000 kg net. Exolit® AP 435 can also be supplied in a variety of big bags, shrink-wrapped.

Storage
Minimum shelf life is 12 months from the date of shipping when stored according to the said conditions.
Products that offer outstanding sustainability advantages are awarded Clariant’s EcoTain® label. EcoTain® products significantly exceed sustainability market standards, have best-in-class performance and contribute overall to sustainability efforts of the company and our customers. Find out more about: EcoTain®.
PeoplePEOPLE
People
  • Non hazardous, studies on life cycle data available
People
  • Contributes to saving lives and assets as a flame retardant, supports the global trend towards low-VOC formulations
PeoplePLANET
People
  • Phosphorus is on the EU list of critical raw materials, however, recycling is possible and actively investigated
People
  • Increased material efficiency and reduced waste generation in production through recycling of raw material
PeoplePERFORMANCE
People
  • Joint developments with customers on formulations

 

 

 

People
  • Improves long-term stability of waterborne solutions. Lower VOC emissions enable the obtainment of e. g. Leadership in Energy and Environmental Design or other certifications according to ISO 16000
Documentos
Fale conosco
Entre em contato conosco para obter detalhes sobre segurança e regulamentos ou a ficha de informações de segurança de produtos químicos (FISPQ).

Baixar arquivo

Insira os seus dados de contato, e o arquivo começará a baixar imediatamente após o envio dos seus dados. Essa operação só precisa ser feita para o primeiro arquivo que for baixado neste site. Obrigado por sua compreensão.

Informações pessoais

Alexis Miller
Alexis Miller
Contact Person

Solicitação à Clariant

Produtos relacionados

Solicitação à Clariant

Insira suas informações de contato para que possamos processar sua solicitação. Obrigado por seu interesse.

Alexis Miller
Alexis Miller
Contact Person
Aviso legal:
Estas informações correspondem ao estado atual do nosso conhecimento, destinando-se à descrição geral de nossos produtos e suas possíveis aplicações. A Clariant não fornece nenhuma garantia, implícita ou explícita, quanto à precisão, adequação e suficiência das informações nem ausência de defeitos, e não assume nenhuma responsabilidade relacionada a qualquer utilização das mesmas. Qualquer usuário deste produto tem a responsabilidade de determinar a adequação dos produtos da Clariant à sua aplicação específica.<br />
<br />
* Nada que conste nestas informações afeta as Condições e termos gerais de vendas da Clariant, salvo se acordado, de outra forma, por escrito. Devem ser observados quaisquer direitos de propriedade intelectual/industrial existentes. Devido a possíveis alterações em nossos produtos e em leis e regulamentos aplicáveis nacionais e internacionais, a condição de nossos produtos pode se alterar. São disponibilizadas, mediante solicitação, Fichas de Informações de Segurança de Produtos Químicos contendo precauções de segurança, as quais devem ser observadas na manipulação ou no armazenamento dos produtos Clariant, que serão providenciadas em conformidade com a lei vigente. Deve-se obter e analisar as informações aplicáveis da Ficha de Informações de Segurança de Produtos Químicos antes de manipular qualquer desses produtos. Para mais informações, entre em contato com a Clariant.<br />
<br />
* Para vendas a clientes localizados nos Estados Unidos e no Canadá, aplica-se também a seguinte disposição: NENHUMA GARANTIA EXPRESSA OU IMPLÍCITA É FORNECIDA SOBRE A COMERCIALIZAÇÃO, ADEQUAÇÃO E APTIDÃO PARA UM PROPÓSITO PARTICULAR OU DIFERENTE DE QUALQUER PRODUTO OU SERVIÇO.<br />
<br />
© Marca registrada da Clariant registrada em muitos países.<br />
® 2019 Clariant International Ltd 

Você está prestes a sair do domínio da Clariant

O link que você acessou levará você para fora do site da Clariant em aproximadamente 10 segundos. Caso deseje interromper esta operação, pressione “Cancelar”.