PA6/66-CF20

Descrição do produto

Clariant's 20% carbon fiber reinforced polyamide 6/66 (PA6/66-CF20) is created by combining an exceptional copolyamide 6/66 with long carbon fibers. This combination results in a material that is exceptionally strong, chemically and thermally resistant and has minimized warpage due to the carbon fibers.

Benefícios

Strong and tough engineering thermoplastic
Chemically resistant
High heat resistance
Long carbon fiber reinforcement helps minimize warping during printing and improves strength
Very high tensile strength
Reduced thermo-oxidative degradation
Minimized undesired yellowing due to ultraviolet light

Applications*

Mechanical and technical application parts that require strength, toughness and thermal resistance
Prototypes
Tools, jigs, fixtures
ESD safe applications

*Subject to detailed product specifications.

Color Range
Standard

Black

Printing Parameters

Print Temperature = 240-260°C
Print Speed = 20-50 mm/s
Bed Adhesion = polyvinylpyrrolidone (PVP) based glue or a polyamide specific adhesion material applied to the build plate
Bed Temperature = ideally heated up to 80°C
Fan Settings = off to medium

Notes: parameters are dependent on printer used; Clariant tests were performed on an Ultimaker S5 printer.

Typical Property Values

Property	Typical Values	Units	Test Method	Test Specimen
	natural
MECHANICAL PROPERTIES
Tensile stress at yield, 50 mm/min	155	MPa	ISO 527	Injection molded
	--	MPa	ISO 527	3D printed XY / flat at 240°C
	--	MPa	ISO 527	3D printed XZ / on edge at 240°C
	--	MPa	ISO 527	3D printed ZX / upright at 240°C
Tensile stress at break, 50 mm/min	152	MPa	ISO 527	Injection molded
	76	MPa	ISO 527	3D printed XY / flat at 240°C
	101	MPa	ISO 527	3D printed XZ / on edge at 240°C
	18	MPa	ISO 527	3D printed ZX / upright at 240°C
Tensile elongation at yield, 50 mm/min	4.0	%	ISO 527	Injection molded
	--	%	ISO 527	3D printed XY / flat at 240°C
Tensile elongation at break, 50 mm/min	6.0	%	ISO 527	Injection molded
	3.0	%	ISO 527	3D printed XY / flat at 240°C
	2.0	%	ISO 527	3D printed XZ / on edge at 240°C
	0.9	%	ISO 527	3D printed ZX / upright at 240°C
Tensile modulus (modulus of elasticity), 1 mm/min	12292	MPa	ISO 527	Injection molded
	5592	MPa	ISO 527	3D printed XY / flat at 240°C
	8962	MPa	ISO 527	3D printed XZ / on edge at 240°C
	2177	MPa	ISO 527	3D printed ZX / upright at 240°C
Flexural modulus	8940	MPa	ISO 178	Injection molded
Flexural strength	201	MPa	ISO 178	Injection molded
Izod impact notched	12	kJ/m²	ISO 180	Injection molded
Charpy impact notched	7	kJ/m²	ISO 179	Injection molded
		kJ/m²	ISO 179	3D printed XY / flat at 240°C
Charpy impact unnotched	73	kJ/m²	ISO 179	Injection molded
	31	kJ/m²	ISO 179	3D printed XY / flat at 240°C
THERMAL PROPERTIES
Melting point	188-192	°C	ISO 11357, DSC^b
Glass transition temperature		°C	ISO 11357, DSC^b
Heat deflection temperature at 1.8 MPa (A)	166	°C	ISO 75	Injection molded
	157	°C	ISO 75	3D printed XY / flat at 240°C
Heat deflection temperature at 0.45 MPa (B)	178	°C	ISO 75	Injection molded
	172	°C	ISO 75	3D printed XY / flat at 255°C
GENERAL PROPERTIES
Density	1186	kg/m³	ISO 1183
pH	6.2			1% in H₂O
Water absorption		%	ISO 62	24 hours at 23°C
Water content - coulometric Karl Fischer	600	μg/g	ISO 12937	after drying at 100°C for 4 hours
Water content		%	ISO 15512	after drying at 120°C for 2 hours
non-volatile-matter content	~20	%	ISO 3251

^a. Organic based color. ^b. DSC = Differential Scanning Calorimetry at 10°C/minute.

Note: results are generated according to the valid testing standards indicated above and the standard operating procedures used by the testing facilities.

Packaging and Handling

Delivery Form

1.75 mm and 2.85 mm diameter 3D printer filament.

Packaging

1 kg and 5 kg spools of 3D printer filament.

Custom sizes are available upon request.

Storage

Ideally store the 3D printer filament in a cool, dry place at temperatures between 5 to 25°C in a sealed container with the provided Clariant Desi Pak^® desiccant bag. If the 3D printer filament has been exposed to moisture, please dry at 80°C for 3-4 hours with a vacuum or desiccant drying system if possible. Minimum shelf life is 1 year from the date of shipping when properly stored.

Safety

Fale conosco;
Entre em contato conosco para obter detalhes sobre segurança e regulamentos ou a ficha de informações de segurança de produtos químicos (FISPQ).

Imprimir esta página 3D Printing

New Business Development