Термореактивные пластмассы и волокна

Негалоидированные ингибиторы горения для решений, соответствующих принципам устойчивого развития

Разные сорта Exolit® производства Clariant представляют собой широкий ряд негалоидированных ингибиторов горения на основе фосфорного химического состава для термореактивных пластмасс.

Термореактивные пластмассы с содержанием ингибиторов горения Exolit способны пройти самые строгие пожарные испытания, сохраняя хорошие механические свойства. Эти особенности позволяют использовать материалы в новых требовательных областях применения. В случае пожара с участием Exolit-содержащих систем явно заметно снижение плотности дыма и отсутствие коррозийных паров, таких как гидрохлорид. Ниже вы найдете наши предложения продуктов для конкретного полимера.

display_image_nasa_video

Watch how our Exolit® OP 560

CAN MAKE THE FIRST TRIP
TO MARS SAFER

Play
x

thermosets_and_fibers

Janice Nazer

Janice Nazer

Contact Person

Запрос в Clariant

Укажите контактную информацию; она нужна для обработки вашего запроса. Благодарим за проявленный интерес.

Имя и фамилия

 

Адрес вашей эл. почты

Ваша компания

Страна

Message

Похожие продукты

  • Полиуретаны

    • Exolit® AP 422

      Exolit AP 422 is a fine-particle ammonium polyphosphate (phase II) produced by a special method. The product is largely insoluble in water and completely insoluble in organic solvents. It is colourless, non-hygroscopic and non-flammable. Больше

    • Exolit® AP 750

      Exolit AP 750 is a non-halogenated flame retardant based on ammonium polyphosphate as main component, which develops its effectiveness through phosphorus/nitrogen synergism. In contrast to similar competitive material, it shows high processing stability. Exolit AP 750 differs in its mode of action from non phosphorus-based flame retardants (e. g. brominated, chlorinated or mineral FRs like ATH) by achieving its effect through intumescence. Material containing Exolit AP 750 will foam on exposure to flame. The carbon-rich foam layer so formed will protect the polymer and in many cases the substrate below through its heat-insulating effect, reduces further oxygen access and prevents dripping in case of a thermoplastic based formulation. Beyond the primary effects on fire behavior such as reduction of flame propagation rate, rate of heat release, dripping behavior, residual lengths of test specimens after flame tests etc., positive secondary fire effects such as low smoke density, no release of corrosive off-gases, lower formation of toxic smoke gases are of great interest. Больше

    • Exolit® AP 760

      Exolit AP 760 is a non-halogenated flame retardant based on ammonium polyphosphate, which develops its effectiveness through phosphorus / nitrogen synergism. When incorporated into thermoplastics, it exhibits high processing stability. Exolit AP 760 differs in its mode of action from chlorine- or bromine-containing flame retardants by achieving its effect through intumescence. The thermoplastic material foams on exposure to flame. The carbon foam layer so formed protects the polymer through its heat-insulating effect, reduces further oxygen access and prevents dripping of the thermoplastic. Больше

    • Exolit® AP 765 (TP)

      Exolit AP 765 (TP) is a non-halogenated flame retardant based on phosphorus and nitrogen synergism. The product achieves its flame retardant effect through intumescence. The thermoplastic material foams and crosslinks on exposure to flame and forms a stable char at the surface acting as a barrier. The protective layer provides a heat-insulation effect, reduces oxygen access and prevents dripping of molten polymer. Больше

    • Exolit® AP 766 (TP)

      Exolit AP 766 (TP) is a non-halogenated flame retardant based on phosphorus and nitrogen synergism. The product achieves its flame retardant effect through intumescence. The thermoplastic material foams and crosslinks on exposure to flame and forms a stable char at the surface acting as a barrier. The protective layer provides a heat-insulation effect, reduces oxygen access and prevents dripping of molten polymer. Больше

    • Exolit® OP 550

      Clariant’s Exolit OP 550 flame retardant can be used for flexible polyurethane foams. It is a medium-viscosity liquid and it is based on a non-halogenated phosphorus polyol with a functionality of approx. 2. The product is a reactive flame retardant that can be chemically reacted into the polymeric matrix, preventing unwanted migration from the foam. Therefore, very low fogging values can be achieved which meet the most stringent emission standards for PU flexible foams in the automotive industry. For more details see our Video about Exolit® OP 550 and 560. Больше

    • Exolit® OP 560

      Exolit® OP 560 is a flame retardant that can be used for flexible polyurethane foams. It is a medium-viscosity liquid and it is based on a non-halogenated phosphorus polyol. The product is a reactive flame retardant which can be chemically reacted into the polymeric matrix. Therefore, very low fogging values can be achieved which meet the most stringent emission standards for PU flexible foams in the automotive industry. Watch how our Exolit® OP 560 can make the first trip to Mars safer. Больше

    • Exolit® RP 6520

      Exolit RP 6520, is a brown-red paste, and is a thixotropic blend of castor oil with stabilised, microencapsulated red phosphorus. The paste form allows safe and simple handling and thus processing is made easier. The thixotropic nature of this concentrate hinders the sedimentation process and simplifies the re-homogenisation after long storage periods. Больше

  • Эпоксидные смолы

    • Exolit® AP 422

      Exolit AP 422 is a fine-particle ammonium polyphosphate (phase II) produced by a special method. The product is largely insoluble in water and completely insoluble in organic solvents. It is colourless, non-hygroscopic and non-flammable. Больше

    • Exolit® AP 423

      Exolit AP 423 is a fine-particle ammonium polyphosphate produced by a special method. The crystal modification is phase II. The product is largely insoluble in water and completely insoluble in organic solvents. It is a white powder, non-hygroscopic and non-flammable. Больше

    • Exolit® AP 740

      Exolit AP 740 is a white free flowing powder. It is a non-halogenated additive flame retardant based on ammonium polyphosphate which develops its effectiveness through phosphorus/nitrogen synergism. Exolit AP 740 differs in its mode of action from chlorine or bromine containing flame retardants by achieving its effect through intumescence. The flame retarded material foams on exposure to flame. The carbon foam layer so formed protects the polymer through its heat-insulating effect and reduces further oxygen access. Больше

    • Exolit® AP 742

      Exolit AP 742 is a non-halogenated, additive flame retardant based on ammonium polyphosphate, which develops its effectiveness through a phosphorus/nitrogen synergism. Exolit AP 742 differs in its mode of action from other flame retardant technologies (e.g. chlorine- or bromine-containing flame retardants and minerals) by achieving its effect through intumescence. The flame retarded material foams on exposure to flame. The carbon foam layer so formed protects the polymer by its heat-insulating effect and reduces further oxygen access. Больше

    • Exolit® AP 750

      Exolit AP 750 is a non-halogenated flame retardant based on ammonium polyphosphate as main component, which develops its effectiveness through phosphorus/nitrogen synergism. In contrast to similar competitive material, it shows high processing stability. Exolit AP 750 differs in its mode of action from non phosphorus-based flame retardants (e. g. brominated, chlorinated or mineral FRs like ATH) by achieving its effect through intumescence. Material containing Exolit AP 750 will foam on exposure to flame. The carbon-rich foam layer so formed will protect the polymer and in many cases the substrate below through its heat-insulating effect, reduces further oxygen access and prevents dripping in case of a thermoplastic based formulation. Beyond the primary effects on fire behavior such as reduction of flame propagation rate, rate of heat release, dripping behavior, residual lengths of test specimens after flame tests etc., positive secondary fire effects such as low smoke density, no release of corrosive off-gases, lower formation of toxic smoke gases are of great interest. Больше

    • Exolit® OP 930

      Exolit OP 930 is a white, fine-grained powder based on an organic phosphinate. The product is not hygroscopic and it is insoluble in water and common organic solvents like acetone, dichloromethane, MEK, toluene. Exolit OP 930 can easily be dispersed in solvents like acetone or MEK. For more details see our Innovation Spotlight video . Больше

    • Exolit® OP 935

      Exolit OP 935 is a white, fine-grained powder based on an organic phosphinate. The product is not hygroscopic and it is insoluble in water and common organic solvents like acetone, dichloromethane, MEK, toluene. Exolit OP 935 can easily be dispersed in solvents like acetone or MEK. For more details see our Innovation Spotlight video . Больше

  • Фенольные смолы

    • Exolit® AP 422

      Exolit AP 422 is a fine-particle ammonium polyphosphate (phase II) produced by a special method. The product is largely insoluble in water and completely insoluble in organic solvents. It is colourless, non-hygroscopic and non-flammable. Больше

    • Exolit® AP 740

      Exolit AP 740 is a white free flowing powder. It is a non-halogenated additive flame retardant based on ammonium polyphosphate which develops its effectiveness through phosphorus/nitrogen synergism. Exolit AP 740 differs in its mode of action from chlorine or bromine containing flame retardants by achieving its effect through intumescence. The flame retarded material foams on exposure to flame. The carbon foam layer so formed protects the polymer through its heat-insulating effect and reduces further oxygen access. Больше

    • Exolit® AP 742

      Exolit AP 742 is a non-halogenated, additive flame retardant based on ammonium polyphosphate, which develops its effectiveness through a phosphorus/nitrogen synergism. Exolit AP 742 differs in its mode of action from other flame retardant technologies (e.g. chlorine- or bromine-containing flame retardants and minerals) by achieving its effect through intumescence. The flame retarded material foams on exposure to flame. The carbon foam layer so formed protects the polymer by its heat-insulating effect and reduces further oxygen access. Больше

  • Полиэфирные смолы

    • Exolit® AP 422

      Exolit AP 422 is a fine-particle ammonium polyphosphate (phase II) produced by a special method. The product is largely insoluble in water and completely insoluble in organic solvents. It is colourless, non-hygroscopic and non-flammable. Больше

    • Exolit® AP 423

      Exolit AP 423 is a fine-particle ammonium polyphosphate produced by a special method. The crystal modification is phase II. The product is largely insoluble in water and completely insoluble in organic solvents. It is a white powder, non-hygroscopic and non-flammable. Больше

    • Exolit® AP 740

      Exolit AP 740 is a white free flowing powder. It is a non-halogenated additive flame retardant based on ammonium polyphosphate which develops its effectiveness through phosphorus/nitrogen synergism. Exolit AP 740 differs in its mode of action from chlorine or bromine containing flame retardants by achieving its effect through intumescence. The flame retarded material foams on exposure to flame. The carbon foam layer so formed protects the polymer through its heat-insulating effect and reduces further oxygen access. Больше

    • Exolit® AP 742

      Exolit AP 742 is a non-halogenated, additive flame retardant based on ammonium polyphosphate, which develops its effectiveness through a phosphorus/nitrogen synergism. Exolit AP 742 differs in its mode of action from other flame retardant technologies (e.g. chlorine- or bromine-containing flame retardants and minerals) by achieving its effect through intumescence. The flame retarded material foams on exposure to flame. The carbon foam layer so formed protects the polymer by its heat-insulating effect and reduces further oxygen access. Больше

  • Латексы

    • Exolit® RP 614 presscake

      Exolit RP 614 Presscake is a fine brown-red powder with a water content of 10-25%, based on a highly stabilized, microencapsulated grade of red phosphorus. This allows a safe and simple handling of the red phosphorus in a presscake form, and avoids the hazards associated when working with dry red phosphorus powders. Exolit RP 614 Presscake is noted for its high oxidation and thermal stability. It is insoluble in water and organic solvents. Due to the combination of stabilization and microencapsulation, the material is mostly inert against atmospheric influences. Больше

  • Вискозное волокно

    • Exolit® 5060 PK

      Clariant´s Exolit 5060 PK is an organic non-halogenated phosphorus flame retardant, especially designed for incorporation into viscose fibres. It is supplied as a wet presscake of 2,2'-oxybis [5,5-dimethyl-1,3,2-dioxaphosphorinane]-2,2'-disulfide. Больше

  • Загрузите брошюру, чтобы узнать больше

    Загрузить файл

    Укажите свои контактные данные. Загрузка файла начнется сразу после их отправки. Эта процедура выполняется только при первой загрузке файла на данном сайте. Благодарим вас за понимание.

    Личная информация

    Имя и фамилия *

     

    Адрес вашей эл. почты *

    Ваша должность

    Ваша компания


Загрузить файл

Укажите свои контактные данные. Загрузка файла начнется сразу после их отправки. Эта процедура выполняется только при первой загрузке файла на данном сайте. Благодарим вас за понимание.

Личная информация

Имя и фамилия *

 

Адрес вашей эл. почты *

Ваша должность

Ваша компания

Запрос в Clariant

Укажите контактную информацию; она нужна для обработки вашего запроса. Благодарим за проявленный интерес.

Имя и фамилия

 

Адрес вашей эл. почты

Ваша компания

Страна

Message

Disclaimer:
This information corresponds to the present state of our knowledge and is intended as a general description of our products and their possible applications. Clariant makes no warranties, express or implied, as to the information’s accuracy, adequacy, sufficiency or freedom from defect and assumes no liability in connection with any use of this information. Any user of this product is responsible for determining the suitability of Clariant’s products for its particular application.<br />
<br />
* Nothing included in this information waives any of Clariant’s General Terms and Conditions of Sale, which control unless it agrees otherwise in writing. Any existing intellectual/industrial property rights must be observed. Due to possible changes in our products and applicable national and international regulations and laws, the status of our products could change. Material Safety Data Sheets providing safety precautions, that should be observed when handling or storing Clariant products, are available upon request and are provided in compliance with applicable law. You should obtain and review the applicable Material Safety Data Sheet information before handling any of these products. For additional information, please contact Clariant.<br />
<br />
* For sales to customers located within the United States and Canada the following applies in addition: No express or implied warranty is made of the merchantability, suitability, fitness for a particular purpose or otherwise of any product or service.<br />
<br />
© Trademark of Clariant registered in many countries.<br />
® 2013 Clariant International Ltd 

Вы собираетесь покинуть сайт Clariant.com

Через 10 секунд вы покинете сайт Clariant.com и перейдете по выбранной ссылке. Чтобы остановить переход, нажмите кнопку «Отмена».