热固性材料和纤维

用于可持续性解决方案的无卤阻燃剂

根据其 Exolit® 等级,科莱恩基于磷化学应用为热固性材料提供一系列丰富的无卤阻燃剂。

使用 Exolit 阻燃剂的热固性系统可以通过要求最高的燃烧试验,同时保持良好的机械性能。这些特性使得材料可以用于要求高的新应用领域。如果含 Exolit 的系统遇到火灾,烟密度会明显降低,并且不会产生诸如氯化氢这样的腐蚀性气体。在下面通过目标聚合物,您可以找到我们的产品。

display_image_nasa_video

Watch how our Exolit® OP 560

CAN MAKE THE FIRST TRIP
TO MARS SAFER

Play
x

thermosets_and_fibers

Janice Nazer

Janice Nazer

Contact Person

向科莱恩发送请求

请输入您的联络信息以便我们处理您的请求。 感谢您的关注。

您的姓名

 

您的电子邮箱

您的职位

您的公司

所在国家/地区

电话

Message

相关产品

  • 聚氨酯 (PUR)

    • Exolit® AP 422

      Exolit AP 422 is a fine-particle ammonium polyphosphate (phase II) produced by a special method. The product is largely insoluble in water and completely insoluble in organic solvents. It is colourless, non-hygroscopic and non-flammable. 更多

    • Exolit® AP 750

      Exolit AP 750 is a non-halogenated flame retardant based on ammonium polyphosphate as main component, which develops its effectiveness through phosphorus/nitrogen synergism. In contrast to similar competitive material, it shows high processing stability. Exolit AP 750 differs in its mode of action from non phosphorus-based flame retardants (e. g. brominated, chlorinated or mineral FRs like ATH) by achieving its effect through intumescence. Material containing Exolit AP 750 will foam on exposure to flame. The carbon-rich foam layer so formed will protect the polymer and in many cases the substrate below through its heat-insulating effect, reduces further oxygen access and prevents dripping in case of a thermoplastic based formulation. Beyond the primary effects on fire behavior such as reduction of flame propagation rate, rate of heat release, dripping behavior, residual lengths of test specimens after flame tests etc., positive secondary fire effects such as low smoke density, no release of corrosive off-gases, lower formation of toxic smoke gases are of great interest. 更多

    • Exolit® AP 760

      Exolit AP 760 is a non-halogenated flame retardant based on ammonium polyphosphate, which develops its effectiveness through phosphorus / nitrogen synergism. When incorporated into thermoplastics, it exhibits high processing stability. Exolit AP 760 differs in its mode of action from chlorine- or bromine-containing flame retardants by achieving its effect through intumescence. The thermoplastic material foams on exposure to flame. The carbon foam layer so formed protects the polymer through its heat-insulating effect, reduces further oxygen access and prevents dripping of the thermoplastic. 更多

    • Exolit® AP 765 (TP)

      Exolit AP 765 (TP) is a non-halogenated flame retardant based on phosphorus and nitrogen synergism. The product achieves its flame retardant effect through intumescence. The thermoplastic material foams and crosslinks on exposure to flame and forms a stable char at the surface acting as a barrier. The protective layer provides a heat-insulation effect, reduces oxygen access and prevents dripping of molten polymer. 更多

    • Exolit® AP 766 (TP)

      Exolit AP 766 (TP) is a non-halogenated flame retardant based on phosphorus and nitrogen synergism. The product achieves its flame retardant effect through intumescence. The thermoplastic material foams and crosslinks on exposure to flame and forms a stable char at the surface acting as a barrier. The protective layer provides a heat-insulation effect, reduces oxygen access and prevents dripping of molten polymer. 更多

    • Exolit® OP 550

      Clariant’s Exolit OP 550 flame retardant can be used for flexible polyurethane foams. It is a medium-viscosity liquid and it is based on a non-halogenated phosphorus polyol with a functionality of approx. 2. The product is a reactive flame retardant that can be chemically reacted into the polymeric matrix, preventing unwanted migration from the foam. Therefore, very low fogging values can be achieved which meet the most stringent emission standards for PU flexible foams in the automotive industry. For more details see our Video about Exolit® OP 550 and 560. 更多

    • Exolit® OP 560

      Exolit® OP 560 is a flame retardant that can be used for flexible polyurethane foams. It is a medium-viscosity liquid and it is based on a non-halogenated phosphorus polyol. The product is a reactive flame retardant which can be chemically reacted into the polymeric matrix. Therefore, very low fogging values can be achieved which meet the most stringent emission standards for PU flexible foams in the automotive industry. Watch how our Exolit® OP 560 can make the first trip to Mars safer. 更多

    • Exolit® RP 6520

      Exolit RP 6520, is a brown-red paste, and is a thixotropic blend of castor oil with stabilised, microencapsulated red phosphorus. The paste form allows safe and simple handling and thus processing is made easier. The thixotropic nature of this concentrate hinders the sedimentation process and simplifies the re-homogenisation after long storage periods. 更多

  • 环氧树脂

    • Exolit® AP 422

      Exolit AP 422 is a fine-particle ammonium polyphosphate (phase II) produced by a special method. The product is largely insoluble in water and completely insoluble in organic solvents. It is colourless, non-hygroscopic and non-flammable. 更多

    • Exolit® AP 423

      Exolit AP 423 is a fine-particle ammonium polyphosphate produced by a special method. The crystal modification is phase II. The product is largely insoluble in water and completely insoluble in organic solvents. It is a white powder, non-hygroscopic and non-flammable. 更多

    • Exolit® AP 740

      Exolit AP 740 is a white free flowing powder. It is a non-halogenated additive flame retardant based on ammonium polyphosphate which develops its effectiveness through phosphorus/nitrogen synergism. Exolit AP 740 differs in its mode of action from chlorine or bromine containing flame retardants by achieving its effect through intumescence. The flame retarded material foams on exposure to flame. The carbon foam layer so formed protects the polymer through its heat-insulating effect and reduces further oxygen access. 更多

    • Exolit® AP 742

      Exolit AP 742 is a non-halogenated, additive flame retardant based on ammonium polyphosphate, which develops its effectiveness through a phosphorus/nitrogen synergism. Exolit AP 742 differs in its mode of action from other flame retardant technologies (e.g. chlorine- or bromine-containing flame retardants and minerals) by achieving its effect through intumescence. The flame retarded material foams on exposure to flame. The carbon foam layer so formed protects the polymer by its heat-insulating effect and reduces further oxygen access. 更多

    • Exolit® AP 750

      Exolit AP 750 is a non-halogenated flame retardant based on ammonium polyphosphate as main component, which develops its effectiveness through phosphorus/nitrogen synergism. In contrast to similar competitive material, it shows high processing stability. Exolit AP 750 differs in its mode of action from non phosphorus-based flame retardants (e. g. brominated, chlorinated or mineral FRs like ATH) by achieving its effect through intumescence. Material containing Exolit AP 750 will foam on exposure to flame. The carbon-rich foam layer so formed will protect the polymer and in many cases the substrate below through its heat-insulating effect, reduces further oxygen access and prevents dripping in case of a thermoplastic based formulation. Beyond the primary effects on fire behavior such as reduction of flame propagation rate, rate of heat release, dripping behavior, residual lengths of test specimens after flame tests etc., positive secondary fire effects such as low smoke density, no release of corrosive off-gases, lower formation of toxic smoke gases are of great interest. 更多

    • Exolit® OP 930

      Exolit OP 930 is a white, fine-grained powder based on an organic phosphinate. The product is not hygroscopic and it is insoluble in water and common organic solvents like acetone, dichloromethane, MEK, toluene. Exolit OP 930 can easily be dispersed in solvents like acetone or MEK. For more details see our Innovation Spotlight video . 更多

    • Exolit® OP 935

      Exolit OP 935 is a white, fine-grained powder based on an organic phosphinate. The product is not hygroscopic and it is insoluble in water and common organic solvents like acetone, dichloromethane, MEK, toluene. Exolit OP 935 can easily be dispersed in solvents like acetone or MEK. For more details see our Innovation Spotlight video . 更多

  • 酚醛树脂

    • Exolit® AP 422

      Exolit AP 422 is a fine-particle ammonium polyphosphate (phase II) produced by a special method. The product is largely insoluble in water and completely insoluble in organic solvents. It is colourless, non-hygroscopic and non-flammable. 更多

    • Exolit® AP 740

      Exolit AP 740 is a white free flowing powder. It is a non-halogenated additive flame retardant based on ammonium polyphosphate which develops its effectiveness through phosphorus/nitrogen synergism. Exolit AP 740 differs in its mode of action from chlorine or bromine containing flame retardants by achieving its effect through intumescence. The flame retarded material foams on exposure to flame. The carbon foam layer so formed protects the polymer through its heat-insulating effect and reduces further oxygen access. 更多

    • Exolit® AP 742

      Exolit AP 742 is a non-halogenated, additive flame retardant based on ammonium polyphosphate, which develops its effectiveness through a phosphorus/nitrogen synergism. Exolit AP 742 differs in its mode of action from other flame retardant technologies (e.g. chlorine- or bromine-containing flame retardants and minerals) by achieving its effect through intumescence. The flame retarded material foams on exposure to flame. The carbon foam layer so formed protects the polymer by its heat-insulating effect and reduces further oxygen access. 更多

  • 聚酯树脂

    • Exolit® AP 422

      Exolit AP 422 is a fine-particle ammonium polyphosphate (phase II) produced by a special method. The product is largely insoluble in water and completely insoluble in organic solvents. It is colourless, non-hygroscopic and non-flammable. 更多

    • Exolit® AP 423

      Exolit AP 423 is a fine-particle ammonium polyphosphate produced by a special method. The crystal modification is phase II. The product is largely insoluble in water and completely insoluble in organic solvents. It is a white powder, non-hygroscopic and non-flammable. 更多

    • Exolit® AP 740

      Exolit AP 740 is a white free flowing powder. It is a non-halogenated additive flame retardant based on ammonium polyphosphate which develops its effectiveness through phosphorus/nitrogen synergism. Exolit AP 740 differs in its mode of action from chlorine or bromine containing flame retardants by achieving its effect through intumescence. The flame retarded material foams on exposure to flame. The carbon foam layer so formed protects the polymer through its heat-insulating effect and reduces further oxygen access. 更多

    • Exolit® AP 742

      Exolit AP 742 is a non-halogenated, additive flame retardant based on ammonium polyphosphate, which develops its effectiveness through a phosphorus/nitrogen synergism. Exolit AP 742 differs in its mode of action from other flame retardant technologies (e.g. chlorine- or bromine-containing flame retardants and minerals) by achieving its effect through intumescence. The flame retarded material foams on exposure to flame. The carbon foam layer so formed protects the polymer by its heat-insulating effect and reduces further oxygen access. 更多

  • 乳液

    • Exolit® RP 614 presscake

      Exolit RP 614 Presscake is a fine brown-red powder with a water content of 10-25%, based on a highly stabilized, microencapsulated grade of red phosphorus. This allows a safe and simple handling of the red phosphorus in a presscake form, and avoids the hazards associated when working with dry red phosphorus powders. Exolit RP 614 Presscake is noted for its high oxidation and thermal stability. It is insoluble in water and organic solvents. Due to the combination of stabilization and microencapsulation, the material is mostly inert against atmospheric influences. 更多

  • 粘胶纤维

    • Exolit® 5060 PK

      Clariant´s Exolit 5060 PK is an organic non-halogenated phosphorus flame retardant, especially designed for incorporation into viscose fibres. It is supplied as a wet presscake of 2,2'-oxybis [5,5-dimethyl-1,3,2-dioxaphosphorinane]-2,2'-disulfide. 更多

  • 下载手册以了解更多资讯

    下载文件

    请输入您的详细联系信息,信息提交以后将立即开始下载文件。 只有您第一次在本网站下载文件时需要进行此操作。 感谢您的理解。

    个人信息

    您的姓名 *

     

    您的电子邮箱 *

    您的职位

    您的公司


下载文件

请输入您的详细联系信息,信息提交以后将立即开始下载文件。 只有您第一次在本网站下载文件时需要进行此操作。 感谢您的理解。

个人信息

您的姓名 *

 

您的电子邮箱 *

您的职位

您的公司

向科莱恩发送请求

请输入您的联络信息以便我们处理您的请求。 感谢您的关注。

您的姓名

 

您的电子邮箱

您的职位

您的公司

所在国家/地区

电话

Message

Disclaimer:
This information corresponds to the present state of our knowledge and is intended as a general description of our products and their possible applications. Clariant makes no warranties, express or implied, as to the information’s accuracy, adequacy, sufficiency or freedom from defect and assumes no liability in connection with any use of this information. Any user of this product is responsible for determining the suitability of Clariant’s products for its particular application.<br />
<br />
* Nothing included in this information waives any of Clariant’s General Terms and Conditions of Sale, which control unless it agrees otherwise in writing. Any existing intellectual/industrial property rights must be observed. Due to possible changes in our products and applicable national and international regulations and laws, the status of our products could change. Material Safety Data Sheets providing safety precautions, that should be observed when handling or storing Clariant products, are available upon request and are provided in compliance with applicable law. You should obtain and review the applicable Material Safety Data Sheet information before handling any of these products. For additional information, please contact Clariant.<br />
<br />
* For sales to customers located within the United States and Canada the following applies in addition: No express or implied warranty is made of the merchantability, suitability, fitness for a particular purpose or otherwise of any product or service.<br />
<br />
© Trademark of Clariant registered in many countries.<br />
® 2013 Clariant International Ltd 

您即将离开 Clariant.com 页面

您点击的链接将在 10 秒内带您离开 Clariant.com 网站页面。 若想停止此操作,单击“取消”。