PP
3D printer filament

PP

3D printer filament

版本编号 :
20190721
版本日期 :
2019年07月21日
Clariant polypropylene (PP) 3D printer filament is optimized with an additive to improve interlayer adhesion during printing. Clariant Hostanox® P-EPQ® and Hostavin® N 30 are added to the polypropylene to improve the heat stability and resistance to thermo-oxidative degradation and yellowing during printing and usage.
优点
  • Semi-crystalline and non-polar thermoplastic polyolefin
  • Tough (good impact resistance)
  • Flexible
  • Formulation optimized for excellent interlayer adhesion
  • Reduced thermo-oxidative degradation
  • Minimized undesired yellowing due to ultraviolet light

Applications*
  • Functional packaging (e.g. bottles)
  • Automotive and transportation parts
  • Parts with living hinges
  • Good material for general polymer applications
*Subject to detailed product specifications.

Color Range
Standard
  • White
  • Black
  • Grey
  • Fluorescent orange
  • Blue
  • Green
  • Red
  • Yellow
ColorWorks® ColorForward® consumer color directions 2019
  • DO NOT DISTURB - ἀταραξία von has fidanken (green blue)
ColorWorks® ColorForward® consumer color directions 2020
  • EYE AM WATCHED - Catch me if you can (orange)
  • Print Temperature = 200-220°C
  • Print Speed = 10-20 mm/s
  • Bed Adhesion = direct printing onto polypropylene based tape, market available adhesion sheets or 3D printing specific adhesives (e.g. Magigoo PP) coated onto a build plate
  • Bed Temperature = ideally 80°C
  • Fan Settings = medium to high
  • Print recommendations = printing polypropylene with large overhangs is difficult and print quality will be design dependent

Note: parameters are dependent on printer used; Clariant tests were performed on an Ultimaker 3 extended and an Ultimaker S5 printer.

Property Typical ValuesUnitsTest MethodTest Specimen
  white blackἀταραξία von has fidankenanatural    
Tensile stress at yield, 50 mm/min2222  MPaISO 527Injection molded
 222023 MPaISO 5273D printed XY / flat at 210-220°C
 222122 MPaISO 5273D printed XZ / on edge at 210°C
  

 MPaISO 5273D printed ZX / upright at 210°C
Tensile stress at break, 50 mm/min1818  MPaISO 527Injection molded
 171617 MPaISO 5273D printed XY / flat at 210-220°C
 14 17 MPaISO 5273D printed XZ / on edge at 210°C
  

 MPaISO 5273D printed ZX / upright at 210°C
Tensile elongation at yield, 50 mm/min1516  %ISO 527Injection molded
 171514 %ISO 5273D printed XY / flat at 210-220°C
 15 14 %ISO 5273D printed XZ / on edge at 210°C
  

 %ISO 5273D printed ZX / upright at 210°C
Tensile elongation at break, 50 mm/min6475  %ISO 527Injection molded
 26310660 %ISO 5273D printed XY / flat at 210-220°C
 254 53 %ISO 5273D printed XZ / on edge at 210°C
  
  %ISO 5273D printed ZX / upright at 210°C
Tensile modulus (modulus of elasticity), 1 mm/min648597  MPaISO 527Injection molded

665582730 MPaISO 5273D printed XY / flat at 210-220°C
 637 613 MPaISO 5273D printed XZ / on edge at 210°C
 

  MPaISO 5273D printed ZX / upright at 210°C
Flexural modulus 
  MPaISO 178Injection molded
Flexural strength 
  MPaISO 178Injection molded
Izod impact notched 
  kJ/m2ISO 180Injection molded
Charpy impact notched5.611.2
 kJ/m2ISO 179 Injection molded
  6.4
 kJ/m2ISO 179 3D printed XY / flat at 210°C
Charpy impact unnotchedno breakno break
 kJ/m2ISO 179Injection molded
  
34 kJ/m2ISO 179 3D printed XY / flat at 210°C
THERMAL PROPERTIES       
Melting point
130-150130-150
°CISO 11357, DSCb 
Glass transition temperature



°CISO 11357, DSCb 
Heat deflection temperature at 1.8 MPa (A)4545  °CISO 75Injection molded
 
47
 °CISO 753D printed XY / flat at 210°C
Heat deflection temperature at 0.45 MPa (B) 57 
°CISO 75Injection molded
 5757
 °CISO 753D printed XY / flat at 210°C
GENERAL PROPERTIES       
Density 904908
kg/m3ISO 1183 
Volume 4.925.25
cm3ISO 1183 
pH 6.56.4
  1% in H2O
Water content - coulometric Karl Fischer    μg/gISO 12937 
Water content - coulometric Karl Fischer    μg/gISO 15512 
non-volatile-matter content <0.5<1 %ISO 3251 
a. Organic based color. b. DSC = Differential Scanning Calorimetry at 10°C/minute.

Note: results are generated according to the valid testing standards indicated above and the standard operating procedures used by the testing facilities.

Delivery Form

1.75 mm and 2.85 mm diameter 3D printer filament.

Packaging

1 kg and 5 kg spools of 3D printer filament.
Custom sizes are available upon request.

Storage

Ideally store the 3D printer filament in a cool, dry place at temperatures between 5 to 25°C in a sealed container with the provided Clariant Desi Pak® desiccant bag. Polypropylene is hydrophobic but can be dried at 80°C for 2-4 hours with a vacuum or desiccant drying system to improve print performance. Minimum shelf life is 1 year from the date of shipping when properly stored.
3D Printing
3D Printing
Contact

向科莱恩发送请求

Related products

向科莱恩发送请求

请输入您的联络信息以便我们处理您的请求。感谢您的关注。

3D Printing
3D Printing
Contact
免责声明:
此信息基于我们目前的知识水平,用于对我们产品和可能应用的一般描述。科莱恩不对此信息的准确性、适当性、充分性或无缺陷做出任何明示或默认保证,并且对使用此信息不承担任何相关责任。产品用户有责任确定该产品是否适合特定应用。<br />
<br />
*此信息与科莱恩销售的一般条款和条件无冲突,除非采用书面形式另加说明,否则以一般条款和条件为准。必须遵守所有现有的知识/工业产权。由于我们的产品及其适用的国家/地区和国际法律法规可能变化,我们的产品状态也可能发生改变。处置或存放科莱恩产品时,必须遵循材料安全数据表规定的安全措施,材料安全数据表将按适用法律规定和用户要求提供。在处置这些产品前,您应当获取并浏览适用的材料安全数据表信息。了解更多信息,请联系科莱恩。<br />
<br />
*此外,以下限制适用于美国和加拿大境内的客户:对任何产品或服务的适销性、适合性、特定用途适用性和其他,不作任何明示或默认保证。<br />
<br />
© 科莱恩已在许多国家/地区注册商标。<br />
® 2019 年科莱恩国际有限公司版权所有 

您即将离开 Clariant.com 页面

您点击的链接将在 10 秒内带您离开 Clariant.com 网站页面。 若想停止此操作,单击“取消”。