PA6/66-CF20
3D printer filament

PA6/66-CF20

3D printer filament

版本编号 :
20190901
版本日期 :
2019年09月01日
Clariant's 20% carbon fiber reinforced polyamide 6/66 (PA6/66-CF20) is created by combining an exceptional copolyamide 6/66 with long carbon fibers. This combination results in a material that is exceptionally strong, chemically and thermally resistant and has minimized warpage due to the carbon fibers.
优点
  • Strong and tough engineering thermoplastic
  • Chemically resistant
  • High heat resistance
  • Long carbon fiber reinforcement helps minimize warping during printing and improves strength
  • Very high tensile strength
  • Reduced thermo-oxidative degradation
  • Minimized undesired yellowing due to ultraviolet light

Applications*
  • Mechanical and technical application parts that require strength, toughness and thermal resistance
  • Prototypes
  • Tools, jigs, fixtures
  • ESD safe applications
*Subject to detailed product specifications.

Color Range
Standard
  • Black
请与我们联系 打印此页
Printing Parameters
Typical Property Values
Packaging and Handling

Printing Parameters

  • Print Temperature = 240-260°C
  • Print Speed = 20-50 mm/s
  • Bed Adhesion = polyvinylpyrrolidone (PVP) based glue or a polyamide specific adhesion material applied to the build plate
  • Bed Temperature = ideally heated up to 80°C
  • Fan Settings = off to medium

Notes: parameters are dependent on printer used; Clariant tests were performed on an Ultimaker S5 printer.

Typical Property Values

Property Typical ValuesUnitsTest MethodTest Specimen
 natural    
MECHANICAL PROPERTIES    
Tensile stress at yield, 50 mm/min155MPaISO 527Injection molded
 --MPaISO 5273D printed XY / flat at 240°C
 --MPaISO 5273D printed XZ / on edge at 240°C
 --MPaISO 5273D printed ZX / upright at 240°C
Tensile stress at break, 50 mm/min152MPaISO 527Injection molded
 76MPaISO 5273D printed XY / flat at 240°C
 101MPaISO 5273D printed XZ / on edge at 240°C
 18MPaISO 5273D printed ZX / upright at 240°C
Tensile elongation at yield, 50 mm/min4.0%ISO 527Injection molded
 --%ISO 5273D printed XY / flat at 240°C
Tensile elongation at break, 50 mm/min6.0%ISO 527Injection molded
 3.0%ISO 5273D printed XY / flat at 240°C
 2.0%ISO 5273D printed XZ / on edge at 240°C
 0.9%ISO 5273D printed ZX / upright at 240°C
Tensile modulus (modulus of elasticity), 1 mm/min12292MPaISO 527Injection molded

5592

MPaISO 5273D printed XY / flat at 240°C
 8962MPaISO 5273D printed XZ / on edge at 240°C
 2177MPaISO 5273D printed ZX / upright at 240°C
Flexural modulus8940MPaISO 178Injection molded
Flexural strength201MPaISO 178Injection molded
Izod impact notched12kJ/m2ISO 180Injection molded
Charpy impact notched7kJ/m2ISO 179Injection molded
 
kJ/m2ISO 1793D printed XY / flat at 240°C
Charpy impact unnotched73kJ/m2ISO 179Injection molded

31kJ/m2ISO 1793D printed XY / flat at 240°C
THERMAL PROPERTIES    
Melting point188-192°CISO 11357, DSCb 
Glass transition temperature
°CISO 11357, DSCb 
Heat deflection temperature at 1.8 MPa (A)166°CISO 75Injection molded
 157°CISO 753D printed XY / flat at 240°C
Heat deflection temperature at 0.45 MPa (B)178°CISO 75Injection molded
 172°CISO 753D printed XY / flat at 255°C
GENERAL PROPERTIES    
Density1186kg/m3ISO 1183 
pH6.2  1% in H2O
Water absorption % ISO 6224 hours at 23°C
Water content - coulometric Karl Fischer600μg/gISO 12937after drying at 100°C for 4 hours
Water content %
ISO 15512after drying at 120°C for 2 hours
non-volatile-matter content~20%ISO 3251 
a. Organic based color. b. DSC = Differential Scanning Calorimetry at 10°C/minute.

Note: results are generated according to the valid testing standards indicated above and the standard operating procedures used by the testing facilities.

Packaging and Handling

Delivery Form

1.75 mm and 2.85 mm diameter 3D printer filament.

Packaging

1 kg and 5 kg spools of 3D printer filament.
Custom sizes are available upon request.

Storage

Ideally store the 3D printer filament in a cool, dry place at temperatures between 5 to 25°C in a sealed container with the provided Clariant Desi Pak® desiccant bag. If the 3D printer filament has been exposed to moisture, please dry at 80°C for 3-4 hours with a vacuum or desiccant drying system if possible. Minimum shelf life is 1 year from the date of shipping when properly stored.
Documents
There are no documents available for this product.
联系我们
要了解有关安全性和管理细则或材料安全数据表 (MSDS) 的详细信息，请与我们取得联系。
打印此页

下载文件

关闭

请输入您的详细联系信息，信息提交以后将立即开始下载文件。只有您第一次在本网站下载文件时需要进行此操作。感谢您的理解。

个人信息

发送请求
3D Printing
3D Printing
Contact
请与我们联系

向科莱恩发送请求

close

请输入您的联络信息以便我们处理您的请求。感谢您的关注。

3D Printing
3D Printing
Contact
发送消息

向科莱恩发送请求

close

请输入您的联络信息以便我们处理您的请求。感谢您的关注。

3D Printing
3D Printing
Contact
发送消息
免责声明： 
此信息基于我们目前的知识水平，用于对我们产品和可能应用的一般描述。科莱恩不对此信息的准确性、适当性、充分性或无缺陷做出任何明示或默认保证，并且对使用此信息不承担任何相关责任。产品用户有责任确定该产品是否适合特定应用。<br />
<br />
*此信息与科莱恩销售的一般条款和条件无冲突，除非采用书面形式另加说明，否则以一般条款和条件为准。必须遵守所有现有的知识/工业产权。由于我们的产品及其适用的国家/地区和国际法律法规可能变化，我们的产品状态也可能发生改变。处置或存放科莱恩产品时，必须遵循材料安全数据表规定的安全措施，材料安全数据表将按适用法律规定和用户要求提供。在处置这些产品前，您应当获取并浏览适用的材料安全数据表信息。了解更多信息，请联系科莱恩。<br />
<br />
*此外，以下限制适用于美国和加拿大境内的客户：对任何产品或服务的适销性、适合性、特定用途适用性和其他，不作任何明示或默认保证。<br />
<br />
© 科莱恩已在许多国家/地区注册商标。<br />
® 2019 年科莱恩国际有限公司版权所有

您即将离开 Clariant.com 页面

close

您点击的链接将在 10 秒内带您离开 Clariant.com 网站页面。 若想停止此操作，单击“取消”。

确定 取消

close