PA6/66-GF20
3D printer filament

PA6/66-GF20

3D printer filament

版本编号 :
20190901
版本日期 :
2019年09月01日

Clariant's 20% glass fiber reinforced polyamide 6/66 (PA6/66-GF20) is a great material for the production of strong 3D printed parts. The glass fibers help increase mechanical properties and minimize warpage while printing.

优点
  • Strong and tough engineering thermoplastic
  • Chemically resistant
  • High heat resistance
  • Good tensile strength
  • Glass fiber reinforcement helps minimize warping during printing and improves strength
  • Reduced thermo-oxidative degradation
  • Minimized undesired yellowing due to ultraviolet light


Applications*

  • Mechanical and technical application parts that require strength, toughness and thermal resistance
  • Prototypes
  • Tools, jigs, fixtures

*Subject to detailed product specifications.

Color Range
Standard

  • Black

Custom colors available upon request.

  • Print Temperature = 240-260°C
  • Print Speed = 20-50 mm/s
  • Bed Adhesion = A polyvinylpyrrolidone (PVP) based glue coated on a glass or carbon fiber surface
  • Bed Temperature = ideally 80°C
  • Fan Settings = off to low

Notes: parameters are dependent on printer used; Clariant tests were performed on an Ultimaker S5 printer.

Property Typical ValuesUnitsTest MethodTest Specimen
 whiteblackredanatural   
MECHANICAL PROPERTIES       
Tensile stress at yield, 50 mm/min92108

MPaISO 527Injection molded
 
72 
MPaISO 5273D printed XY / flat at 250°C
 
89 
MPaISO 5273D printed XZ / on edge at 250°C
 
-- 
MPaISO 5273D printed ZX / upright at 250°C
Tensile stress at break, 50 mm/min8399

MPaISO 527Injection molded
 
70 
MPaISO 5273D printed XY / flat at 240°C
 
88 
MPaISO 5273D printed XZ / on edge at 250°C
 
22 
MPaISO 5273D printed ZX / upright at 250°C
Tensile elongation at yield, 50 mm/min3.83.7
 %ISO 527Injection molded
  3.7  %ISO 5273D printed XY / flat at 250°C
  3.5  %ISO 5273D printed XZ / on edge at 250°C
  --  %ISO 5273D printed ZX / upright at 250°C
Tensile elongation at break, 50 mm/min119.0

%ISO 527Injection molded
 
3.7  %ISO 5273D printed XY / flat at 250°C
 
3.7  %ISO 5273D printed XZ / on edge at 250°C
 
1.7  %ISO 5273D printed ZX / upright at 250°C
Tensile modulus (modulus of elasticity), 1 mm/min54356138  MPaISO 527Injection molded
  3932  MPaISO 5273D printed XY / flat at 250°C
  4795

 

 MPaISO 5273D printed XZ / on edge at 250°C
  2213  MPaISO 5273D printed ZX / upright at 250°C
Flexural modulus
 

MPaISO 178injection molded
Flexural strength  

MPaISO 178Injection molded
Izod impact notched
 

kJ/m2ISO 180Injection molded
Charpy impact notched
5.0

kJ/m2ISO 179Injection molded


 

kJ/m2ISO 1793D printed XY / flat at 250°C
Charpy impact unnotched
62 
kJ/m2ISO 179Injection molded
 
35 
kJ/m2ISO 1793D printed XY / flat at 250°C
THERMAL PROPERTIES       
Melting point
190

 ISO 11357, DSCb 
Glass transition temperature  

°CISO 11357, DSCb 
Heat deflection temperature at 1.8 MPa (A)
158

°CISO 75Injection molded
  126  °CISO 753D printed XY / flat at 250°C
Heat deflection temperature at 0.45 MPa (B)
178

°CISO 75Injection molded
  174  °CISO 753D printed XY / flat at 250°C
GENERAL PROPERTIES       
Density 
  kg/m3ISO 1183 
Volume    cm3ISO 1183 
pH    

1% in H2O
Water absorption 
  % ISO 6224 hours at 23°C
Water content - coulometric Karl Fischer
   μg/gISO 12937after drying at 120°C for 2 hours
Water content 
  %
ISO 15512after drying at 120°C for 2 hours
non-volatile-matter content
   %ISO 3251 
a. Organic based color. b. DSC = Differential Scanning Calorimetry at 10°C/minute.
Note: results are generated according to the valid testing standards indicated above and the standard operating procedures used by the testing facilities.

Delivery Form

1.75 mm and 2.85 mm diameter 3D printer filament.

Packaging

1 kg and 5 kg spools of 3D printer filament.
Custom sizes are available upon request.

Storage

Ideally store the 3D printer filament in a cool, dry place at temperatures between 5 to 25°C in a sealed container with the provided Clariant Desi Pak® desiccant bag. If the 3D printer filament has been exposed to moisture, please dry at 80°C for 3-4 hours with a vacuum or desiccant drying system if possible. Minimum shelf life is 1 year from the date of shipping when properly stored.
3D Printing
3D Printing
Contact

向科莱恩发送请求

向科莱恩发送请求

请输入您的联络信息以便我们处理您的请求。感谢您的关注。

3D Printing
3D Printing
Contact
免责声明:
此信息基于我们目前的知识水平,用于对我们产品和可能应用的一般描述。科莱恩不对此信息的准确性、适当性、充分性或无缺陷做出任何明示或默认保证,并且对使用此信息不承担任何相关责任。产品用户有责任确定该产品是否适合特定应用。<br />
<br />
*此信息与科莱恩销售的一般条款和条件无冲突,除非采用书面形式另加说明,否则以一般条款和条件为准。必须遵守所有现有的知识/工业产权。由于我们的产品及其适用的国家/地区和国际法律法规可能变化,我们的产品状态也可能发生改变。处置或存放科莱恩产品时,必须遵循材料安全数据表规定的安全措施,材料安全数据表将按适用法律规定和用户要求提供。在处置这些产品前,您应当获取并浏览适用的材料安全数据表信息。了解更多信息,请联系科莱恩。<br />
<br />
*此外,以下限制适用于美国和加拿大境内的客户:对任何产品或服务的适销性、适合性、特定用途适用性和其他,不作任何明示或默认保证。<br />
<br />
© 科莱恩已在许多国家/地区注册商标。<br />
® 2019 年科莱恩国际有限公司版权所有 

您即将离开 Clariant.com 页面

您点击的链接将在 10 秒内带您离开 Clariant.com 网站页面。 若想停止此操作,单击“取消”。