Dispersogen LFS
Dispersing agent for water-based pigment preparations & compatibilizer for tinted waterborne/solventborne deco paints

Dispersogen LFS

Dispersing agent for water-based pigment preparations & compatibilizer for tinted waterborne/solventborne deco paints

Edition Date :
September 10, 2019

Dispersogen LFS is an anionic, surfactant-based dispersing agent for water-based pigment preparations, suitable for inorganic and organic pigments as well as for specialty carbon blacks. 

The product is recommended for use in point-of-sales colorants and concentrates for in-plant tinting. Dispersogen LFS can be used as a stand-alone dispersing agent for organic pigments. For inorganic pigment, it is used in combination with a nonionic dispersing agent such as Dispersogen MT 200. The general dosage recommendation is 5-25% on organic pigments and 4-10% on inorganic pigments.

Dispersogen LFS also acts as wetting agent/compatibilizer in waterborne high PVC paints as well as in waterborne and solvent-borne low PVC lacquers. The general dosage (supply form) is 1.0-1.5% in emulsion paints, 1.0-1.5% in acrylic lacquers and 0.5-1.0% in alkyd lacquers. 

Benefits
The advantages of Dispersogen LFS are:

  • low VOC 
  • APEO-free 
  • hazard label free
  • Ecolabel compliant 
  • high pigment concentration 
  • low viscosity of the preparation 
  • high stability of the preparation in a wide temperature range 
  • low foaming 
  • broad registration status: Australia (AICS), Europe (REACH), Japan (ENCS), China (IECSC), Taiwan (NECI), Korea (KECI), New Zealand (NZIoC)
This product is not available in your region. Please contact us for more details.
Jeff McManus
Jeff McManus
Contact Person

Request to Clariant

Related products

Request to Clariant

Please enter your contact information so we are able to process your request. Thank you for your interest.

Jeff McManus
Jeff McManus
Contact Person
Disclaimer:
This information corresponds to the present state of our knowledge and is intended as a general description of our products and their possible applications. Clariant makes no warranties, express or implied, as to the information’s accuracy, adequacy, sufficiency or freedom from defect and assumes no liability in connection with any use of this information. Any user of this product is responsible for determining the suitability of Clariant’s products for its particular application.<br />
<br />
* Nothing included in this information waives any of Clariant’s General Terms and Conditions of Sale, which control unless it agrees otherwise in writing. Any existing intellectual/industrial property rights must be observed. Due to possible changes in our products and applicable national and international regulations and laws, the status of our products could change. Material Safety Data Sheets providing safety precautions, that should be observed when handling or storing Clariant products, are available upon request and are provided in compliance with applicable law. You should obtain and review the applicable Material Safety Data Sheet information before handling any of these products. For additional information, please contact Clariant.<br />
<br />
* For sales to customers located within the United States and Canada the following applies in addition: No express or implied warranty is made of the merchantability, suitability, fitness for a particular purpose or otherwise of any product or service.<br />
<br />
© Trademark of Clariant registered in many countries.<br />
® 2019 Clariant International Ltd 

You are about to leave the Clariant domain

The link you activated will take you outside the Clariant site in about 10 seconds. If you want to stop this, press "Cancel".