Emulsogen LCN 118
Nonionic emulsifier for emulsion polymerization, compatibilizer and process aid for waterborne coatings

Emulsogen LCN 118

Nonionic emulsifier for emulsion polymerization, compatibilizer and process aid for waterborne coatings

Edition Date :
September 09, 2019
Emulsogen LCN 118 is used as a nonionic emulsifier for emulsion polymerization improving the shear, temperature and electrolyte stability of polymer dispersions. The recommended usage is 2% active based on monomers.

In waterborne and solvent-borne lacquers (low PVC), Emulsogen LCN 118 can be used as a compatibilizer to improve tinting strength and to reduce rub-out, water absorption, and haze effects. Dosage recommendation (supply form) in waterborne acrylic lacquers is 1.3-1.9% and in solvent-borne alkyd lacquers 0.33-0.66%.
 
When used during the premixing phase in the production of waterborne emulsion paints (high PVC), Emulsogen LCN 118 also acts as a processing aid and helps to reduce the grinding time by faster deagglomeration of TiO2 and fillers. This is especially of interest in areas of hard water. The general dosage recommendation (supply form) for this purpose is 0.3%.

Benefits

The use of Emulsogen LCN 118 offers the following advantages:

Product properties:
•low VOC
•free of alkylphenol ethoxylates (APEO)
•readily biodegradable
•easy to handle (liquid material; soluble in water)
•FDA approved

Performance as emulsifier in emulsion polymerization:
•maintains low viscosity of polymer emulsion at different shear rates
•enhanced electrolyte stability
•improved shelf life (high freeze thaw stability)
•similar polymerization results to APEOs
•Dosage level is 2 % based on monomers.

Performance as compatibilizer in water-borne acrylic lacquers (low PVC):
•prevents rub-out effects
•increased tinting strength
•improved wetting of the coated surface  
•good adhesion on polyethylene
•reduced water absorbtion
•use recommandation: 1.0 - 1.5% active dosage, 1.3 - 1.9% supply dosage

Performance as compatibilizer in solvent-borne alkyd lacquers (low PVC):
•prevents rub-out effects
•increased tinting strength
•reduced haze
•good adhesion on metal and zinc
•no impact on storage stability
•no yellowing effects
•no influence on overpaintability performance
•use recommandation: 0.25 - 0.5% active dosage, 0.33 - 0.66% supply dosage    

Performance as process aid in the production of water-borne emulsion paints (high PVC):
•reduces the grinding time by faster desagglomeration of TiO2 and fillers in slurries
•less energy consumption and more production capacity
•use recommandation: 0.3% supply dosage

Product group:  Fatty alcohol ethoxylate
Active content: 80%
Appearance: clear liquid
pH value: 6 - 8 
Solubility: soluble in water
Density: approx. 1.05 g/cm3 
Viscosity: approx. 270 mPas 
Crystallisation temperature:  < 5 °C
Flash point: > 100 °C
HLB value: 14

Use as nonionic emulsifier in emulsion polymerization:
•Styrene/acrylate dispersions
•Acrylate dispersions
•Vinyl acetate dispersions
•Butadiene/styrene latex
•dosage level is 2% based on monomers.

Use as compatibilizer:
•water-borne acrylic lacquers (low PVC): use recommandation: 1.0-1.5% active dosage, 1.3-1.9% supply dosage
•solvent-borne alkyd lacquers (low PVC): use recommandation: 0.25-0.5% active dosage, 0.33-0.66% supply dosage

Use as process aid:
•in the production of water-borne emulsion paints (high PVC): use recommandation: 0.3% supply dosage

Documents
Please be aware that Safety Data Sheets are currently restricted to Europe. If you need this document for other regions, please contact us.

Download File

Please enter your contact details and the file will start downloading immediately after your details have been submitted. This only has to be done for the first file you download on this site. Thank you for your understanding.

Personal Information

Jeff McManus
Jeff McManus
Contact Person

Request to Clariant

Related products

Request to Clariant

Please enter your contact information so we are able to process your request. Thank you for your interest.

Jeff McManus
Jeff McManus
Contact Person
Disclaimer:
This information corresponds to the present state of our knowledge and is intended as a general description of our products and their possible applications. Clariant makes no warranties, express or implied, as to the information’s accuracy, adequacy, sufficiency or freedom from defect and assumes no liability in connection with any use of this information. Any user of this product is responsible for determining the suitability of Clariant’s products for its particular application.<br />
<br />
* Nothing included in this information waives any of Clariant’s General Terms and Conditions of Sale, which control unless it agrees otherwise in writing. Any existing intellectual/industrial property rights must be observed. Due to possible changes in our products and applicable national and international regulations and laws, the status of our products could change. Material Safety Data Sheets providing safety precautions, that should be observed when handling or storing Clariant products, are available upon request and are provided in compliance with applicable law. You should obtain and review the applicable Material Safety Data Sheet information before handling any of these products. For additional information, please contact Clariant.<br />
<br />
* For sales to customers located within the United States and Canada the following applies in addition: No express or implied warranty is made of the merchantability, suitability, fitness for a particular purpose or otherwise of any product or service.<br />
<br />
© Trademark of Clariant registered in many countries.<br />
® 2019 Clariant International Ltd 

You are about to leave the Clariant domain

The link you activated will take you outside the Clariant site in about 10 seconds. If you want to stop this, press "Cancel".