Ceridust® 9615 A
Wax compound, based on polyethylene wax and amide wax
Well balanced micronized blend of polyethylene and amide wax. This outstanding combination offers good rub and scratch resistance, anti-blocking properties and slip performance in printing inks, wood and industrial coatings.
Used in powder coatings, Ceridust 9615 A acts as an excellent degassing agent. It furthermore increases the output during extrusion and improves the flowability of the powder.
- Excellent rub resistance after a short drying time
- Very good anti-blocking properties of the finished goods
- Fewer agglomerates in the product, allowing easy dispersion
- Good scratch resistance characteristics in powder coatings
- Degassing agent
- Anti-blocking and anti-caking effect
- Gloss-reducing properties in all kind of coatings
The product does not require a hazard warning label according CLP regulation (Regulation (EC) No. 1272/2008, as amended).
For further information please refer to the Material Safety Data Sheet.
SpecificationsDelivery Specifications and (*) General Properties
|Characteristics||Unit||Target value||Test method|
|Appearance||white micronized powder||QM-AA-634|
|Acid value||[mg KOH/g]||2.0 - 5.0||ISO 2114|
|Density (23°C)||[g/cm³]||0.97 - 1.00||ISO 1183|
|Drop point||[°C]||137 - 143||ISO 2176|
|Particle size D50||[µm]||5.5 - 7.5||QM-AA-112|
ApplicationsCeridust 9615 A is recommended for solvent and water based coatings and inks. It is also very effective additive for powder coatings.
It is a slip and rub resistance additive in all kind of printing ink systems. Especially in pasty inks the phenomenon of piling on the rubber blanket is noticeable reduced due to anti blocking behavior.
In solvent and water based coatings the micronized wax compound performs as scratch resistance additive and lowers the coefficient of friction (slip). It also improves the abrasion resistance and minimizes metal markings. In wood coatings it provides additionally soft touch and anti blocking performance. It can also be used as additive to improve the sand ability.
In powder coatings it is a very effective degassing agent in all kind of powder coatings. It is also increases the output during extrusion process and improves the flow ability of the powder. Ceridust 9615 A provides slip properties and enhances scratch resistance of the cured powder coating. The fine and free flowing powder is easy to blend with all the other ingredients at the beginning of the production procedure.
Packaging and HandlingDelivery form
Paper bag 20 kg
Pallet 480 kg (24 bags)
Pallet 600 kg (30 bags)
For best shelf life store this product in a dry area at normal ambient temperatures.
Minimum shelf life is two years from the date of shipping when properly stored.