Licocene® PP MS 641 granules TP
Licocene Performance Polymer

Licocene® PP MS 641 granules TP

Licocene Performance Polymer

Edition Number :
4
Edition Date :
September 11, 2015
Licocene PP MS 641 granules TP is a stabilized maleic anhydride grafted polypropylene wax.
Benefits
  • Stabilized MAH grafted PP
  • Improved compatibility to polar components
  • Low level of free MAH
  • Dispersable in water
Hazards
The product does not require a hazard warning label according CLP regulation (Regulation (EC) No. 1272/2008, as amended).
For further information please refer to the Material Safety Data Sheet.
General Properties
 
Characteristics   Unit   Target Value   Test Method 
Appearance    yellowish granules   QM-AA-634  
Acid Value  [mg KOH/g]   ~ 41   QM-AA-351a  
Density (23°C)  [g/cm³]   ~ 0,93   ISO 1183  
Viscosity  [mPa·s]   ~ 1100   QM-AA-158 at 170°C  
Softening Point  [°C] ~ 144 ASTM D 3104
Stabilizer content [%] ~ 2,0 QM-AA-939
Used in hot melt formulations, Licocene PP MS 641 granules TP offers improved adhesion and cohesion combined with a high heat resistance.

Compatibilizer for water based dispersions
Delivery form
Granules

Packaging
Polyethylene bag 20 kg
Pallet 800 kg (40 bags)
Big Bag 900 kg

Storage
For best shelf life store this product in a dry area at normal ambient temperatures.
Minimum shelf life is 2 years from the date of shipping when properly stored.
Documents
There are no documents available for this product.
Contact Us
Please contact us for safety and regulatory details or the Material Safety Data Sheet (MSDS).

Download File

Please enter your contact details and the file will start downloading immediately after your details have been submitted. This only has to be done for the first file you download on this site. Thank you for your understanding.

Personal Information

Alexis Miller
Alexis Miller
Contact Person

Request to Clariant

Request to Clariant

Please enter your contact information so we are able to process your request. Thank you for your interest.

Alexis Miller
Alexis Miller
Contact Person
Disclaimer:
This information corresponds to the present state of our knowledge and is intended as a general description of our products and their possible applications. Clariant makes no warranties, express or implied, as to the information’s accuracy, adequacy, sufficiency or freedom from defect and assumes no liability in connection with any use of this information. Any user of this product is responsible for determining the suitability of Clariant’s products for its particular application.<br />
<br />
* Nothing included in this information waives any of Clariant’s General Terms and Conditions of Sale, which control unless it agrees otherwise in writing. Any existing intellectual/industrial property rights must be observed. Due to possible changes in our products and applicable national and international regulations and laws, the status of our products could change. Material Safety Data Sheets providing safety precautions, that should be observed when handling or storing Clariant products, are available upon request and are provided in compliance with applicable law. You should obtain and review the applicable Material Safety Data Sheet information before handling any of these products. For additional information, please contact Clariant.<br />
<br />
* For sales to customers located within the United States and Canada the following applies in addition: No express or implied warranty is made of the merchantability, suitability, fitness for a particular purpose or otherwise of any product or service.<br />
<br />
© Trademark of Clariant registered in many countries.<br />
® 2019 Clariant International Ltd 

You are about to leave the Clariant domain

The link you activated will take you outside the Clariant site in about 10 seconds. If you want to stop this, press "Cancel".