AddWorks LXR 308 AP is a synergistic solution for solventborne systems which require light stabilization.
- Low initial color
- Non-interaction with metal catalysts
- No interaction with photoinitiators in UV curable systems
- Very good UV performance in QUV-B and Xenon weathering test up to 2000 hrs
Classification according CLP regulation (Regulation (EC) No. 1272/2008, as amended).
Flammable liquids, Cat. 3
Skin irritation, Cat. 2
Eye irritation, Cat. 2
Skin sensitization, Cat. 1
Specific target organ toxicity - repeated exposure, Cat. 2
Acute aquatic toxicity, Cat. 1
Chronic aquatic toxicity, Cat. 1
For further information please refer to the Material Safety Data Sheet.
Classification: Mixture of UV absorber and HALS
Delivery Specifications and (*) General Properties
|Characteristics||Unit||Target value||Test method|
|Dry content||[%]||83.0 - 87.0||QC-999-0031 (2.5h at 150°C)|
|Iodine color||max. 15||DIN 6162|
AddWorks LXR 308 AP is miscible with most of the commonly used organic solvents, e.g. n-Butanol, Ethyl Acetate, Xylene or White Spirit. Water solubility is less than 0.01%.
Most of the solventborne clearcoats being UV stabilized with a 2:1 UVA/HALS combination, AddWorks LXR 308 AP can be a single solution replacement.
AddWorks LXR 308 AP is recommended for the following applications:
- Car refinish clearcoats
- Industrial and wood coatings
- UV curable coatings (no interaction with photoinitiators)
Recommended dosage level of AddWorks LXR 308 AP: 1.0 - 3.0% (active additive on solid resin)
Steel drum 25 kg
Pallet 300 kg (12 drums)
Steel drum 50 kg
Pallet 300 kg (6 drums)
Storage for longer than six weeks at higher temperature than +40°C can result in darkening of the additive, but this has no effect on the UV absorption capacity.
Minimum shelf life is two years from the date of shipping when properly stored in original sealed drums at room temperature under the recommended conditions.