Genapol RPF 1720

Low-foaming, nonionic lubrication and wetting agent

Edition Date :
November 23, 2021
Genapol RPF 1720 is specially designed to be used for fully synthetic metal working fluids and silicon ingots slicing fluid. It is resistant to water hardness, metal salts, acids and alkalis in practice-orientated concentrations. Additionally, it provides excellent wetting properties resulting in a low surface tension (34,8 mN/m in water) and a low contact angle on steel (surface tension 5% in water 34.4 mN/m, contact angle V2A steel, 5% in water 15.5°).
Benefits

Product performance

  • Suitable for synthetic metal working fluids and silicon ingots slicing fluids
  • Excellent wetting properties
  • Resistant to water hardness, acids and alkalis
  • Low contact angle on steel
Marc Chan
Marc Chan
Contact Person

Request to Clariant

Order Sample
Chemical Name
  • Reverse block copolymer of propylene oxide and ethylene oxide
Product Function
  • Lubricity improver
Chemical Type
  • Block copolymers
Applications
  • Metal cleaner
  • Metal working fluids (semi-synthetic)
  • Metal working fluids (fully synthetic)
Documents

Download File

Please enter your contact details and the file will start downloading immediately after your details have been submitted. This only has to be done for the first file you download on this site. Thank you for your understanding.

Personal Information

Genapol RPF 1720

Please choose one of the available product configurations:
No files are available for this product.

Login Required

Log in or register to ClariHub for our full set of ingredient documentation, formulations and more resources!
Technical data
Product groupreverse block copolymer
Ionicitynonionic
Active contentapprox. 100%
Appearance (20°C)clear liquid 
Cloud point (5g in 25 % BDG solution)35.0 - 39.0°C 
Cloud point (1g in 100ml dist. water)33.0 - 38.0°C 
pH of 1% in aqueous solutionapprox. 7
Pour point (ISO 3016)approx. -35°C
Density, (20°C)approx. 1.030 g/cm3
Viscosity, (40°C)approx. 186 mPa*s
Solubility / 20°Csoluble in water
Contact angle V2A steel, 5% in water15.5°
Surface tension 5% in water34.4 mN/m
Disclaimer:
This information corresponds to the present state of our knowledge and is intended as a general description of our products and their possible applications. Clariant makes no warranties, express or implied, as to the information’s accuracy, adequacy, sufficiency or freedom from defect and assumes no liability in connection with any use of this information. Any user of this product is responsible for determining the suitability of Clariant’s products for its particular application.<br />
<br />
* Nothing included in this information waives any of Clariant’s General Terms and Conditions of Sale, which control unless it agrees otherwise in writing. Any existing intellectual/industrial property rights must be observed. Due to possible changes in our products and applicable national and international regulations and laws, the status of our products could change. Material Safety Data Sheets providing safety precautions, that should be observed when handling or storing Clariant products, are available upon request and are provided in compliance with applicable law. You should obtain and review the applicable Material Safety Data Sheet information before handling any of these products. For additional information, please contact Clariant.<br />
<br />
* For sales to customers located within the United States and Canada the following applies in addition: No express or implied warranty is made of the merchantability, suitability, fitness for a particular purpose or otherwise of any product or service.<br />
<br />
© Trademark of Clariant registered in many countries.<br />
® 2019 Clariant International Ltd 

You are about to leave the Clariant domain

The link you activated will take you outside the Clariant site in about 10 seconds. If you want to stop this, press "Cancel".

Request to Clariant

Please enter your contact information so we are able to process your request. Thank you for your interest.

Marc Chan
Marc Chan
Contact Person