Ceridust™ 3050
Product Information
- Excellent dispersion properties to hard-to-disperse pigment masterbatches based on polyolefin
- Provides good rub and scratch resistance and slip performance in solvent-based coatings and printing inks
- Good processing agent to improve flowability and pigment dispersibility in powder coating
- The product can also enhance slip performance of coated finishes
- Deliver outstanding anti-block performance for adhesive
Hazards
The product does not require a hazard warning label according CLP regulation (Regulation (EC) No. 1272/2008, as amended).
For further information please refer to the Material Safety Data Sheet.
Delivery Specifications and (*) General Properties
| Characteristics | Unit | Target Value | Test Method |
| Appearance | white micronized powder | QM-AA-634 | |
| Drop point | [°C] | 125 - 130 | ASTM D 3954 |
| Particle size D50 | [µm] | 7.5 - 9.5 | QM-AA-112 |
| Density (23°C) | [g/cm³] | 0.96 - 0.98 | ISO 1183 |
Ceridust 3050 is a fine particle dispersing agent and is recommended for polyolefin, like LLDPE, LDPE, MDPE, HDPE, PP etc. The micronized dispersing agent particles are close to the pigment particles and being almost statistically ideally distributed, show a high likeliness to find a place between pigment particles, thus separating them from each other. Consequently, those pigment particles will not form agglomerates. The early melting behavior of micronized particles leads to a coating effect of the pigment particles and neutralizes the binding forces of pigment particles, prevents them from reagglomeration, eases pigment dispersion and stabilizes the dispersion.
A mixture of standard powder and Ceridust already improves the color strength as well as the filter pressure value.
When used in solvent-based coatings and printing inks, Ceridust 3050 can be incorporated into coating formulations, or into wax dispersion. It improves rub and scratch resistance and enhances slip with smooth touch feel. It can also influence matting subject to dosage level applied.
In powder coating, Ceridust 3050 can be incorporated into coating formula in pre-mixing stage, or post blending stage, where it can improve the flowability of the powder hence, to increase output during extrusion process, due to its low viscosity and very good heat stability.
It also improves slip properties and enhance scratch resistance of coated finishes.
When applicated in adhesive, Ceridust 3050 can significantly reduce residual tack and deliver outstanding anti-block performance。
Delivery form
Micronized powder
Packaging
Paper bag 20 kg
Pallet 600 kg (30 bags)
Storage
For best shelf life store this product in a dry area at normal ambient temperatures.
Minimum shelf life is two years from the date of shipping when properly stored.
