Wettings agents for architectural coatings
Wetting agents/compatibilizers are added to waterborne and solvent-borne coatings to increase the tinting strength and to improve the compatibility with pigments in order to reduce rub-out effects.
Clariant has evaluated its range of wetting agents/compatibilizers for waterborne emulsion paints (high PVC), waterborne acrylic lacquers (low PVC) and solvent-borne alkyd lacquers (low PVC) according to a comprehensive set of parameters.
Possible effects of wetting agents on the coating formulation
WB High PVC (Emulsion)
WB Low PVC (Acrylic)
SB Low PVC (Alkyd)
Tinting strength
✓ ✓ ✓ Rub-out
✓ ✓ ✓ Water absorption
✓ Open time
✓ ✓ Freeze-thaw stability
✓ ✓ Substrate wetting on metal
✓ ✓ Substrate wetting on polyethylene
✓ Reducing grinding time
✓
WB High PVC (Emulsion)
WB Low PVC (Acrylic)
SB Low PVC (Alkyd)
Storage stability
✓ ✓
✓
Impact on gloss
✓
✓
✓ Haze effect
✓ Foaming during formulation and application
✓
✓
Blocking
✓ Wet-scrub
✓
Surface drying and overpaintability
✓ Levelling
✓
Yellowing
✓
Our full portfolio: technical data, MSDS files & samples
All our products are ecolabel compliant, APEO free and low-VOC. Click on the products to learn more.
Products
WB High PVC (EMULSION)
WB Low PVC (ACRYLIC)
SB Low PVC (ALKYD)
> Dispersogen™ AN 200
✓
✓ ✓
> Dispersogen™ ECS
✓
✓
✓ > Dispersogen™ LFS
✓
✓
✓ > Dispersogen™ PL 30
✓
✓
✓ > Emulsogen™ LCN 118
✓ ✓ > Emulsogen™ LCN 158
✓ ✓ > Emulsogen™ LCN 287
✓
> Emulsogen™ TS 100
✓
✓
✓
> Emulsogen™ TS 200
✓
✓
✓
> Genapol™ ED 3060
✓
✓
✓
> Genapol™ O 080
✓
✓
> Genapol™ O 100
✓
✓
✓
Any questions? Contact us!
