油漆和&涂料添加剂

Emulsogen LCN 118 作为乳液聚合工艺专用的非离子乳化剂，可改进聚合物分散剂的剪切、温度和电解质稳定性。推荐用量为 2% 基于各种单体的活性成分。EmulsogenLCN 118 能够作为增容剂用于水性和溶剂型清漆（低 PVC），以改进着色力并减轻磨损、吸水性和雾度效应。 用量建议（供应形态）：水性丙烯酸漆为 1.3-1.9%；溶剂型酚醛漆为 0.33-0.66%。 Emulsogen LCN 118 可作为加工助剂，在生产水性乳胶漆（高 PCV）的预混合阶段使用，有助于加快 TiO2 和填料的解聚，从而缩短研磨时间。本品在水质较硬的地区使用尤其占据优势。该用途的推荐用量（供应形态）通常为 0.3%。

Emulsogen LCN 158 is used as a nonionic emulsifier for emulsion polymerization improving the shear, temperature and electrolyte stability of polymer dispersions. The recommended usage is 2% active based on monomers. In waterborne and solvent-borne lacquers (low PVC), Emulsogen LCN 158 can be used as a compatibilizer to improve tinting strength and to reduce rub-out, water absorption, and haze effects. Dosage recommendation (supply form) in waterborne acrylic lacquers is 1.3-1.9% and in solvent-borne alkyd lacquers 0.33-0.66%.When used during the premixing phase in the production of waterborne emulsion paints (high PVC), Emulsogen LCN 158 also acts as a processing aid and helps to reduce the grinding time by faster deagglomeration of TiO2 and fillers. This is especially of interest in areas of hard water. The general dosage recommendation (supply form) for this purpose is 0.3%.

Emulsogen LCN 287 作为非离子乳化剂，用于丙烯酸酯、苯乙烯-丁二烯酯和醋酸乙烯酯等单体的乳液聚合。 它改进了聚合物分散剂的剪切、温度和电解质稳定性。推荐用量为 1-3% 基于各种单体的活性成分。Emulsogen LCN 287 还可在水性丙烯酸漆中充当润湿剂/增容剂（低 PVC）。该用途的用量（供应形态）通常为 1.4%-2.1%。 该产品适用于申请蓝色天使或欧洲之花等环保标签的低气味涂料。

Emulsogen TS 200 is a nonionic wetting agent for use as a compatibilizer in waterborne high PVC paints, as well as in waterborne and solvent-borne low PVC lacquers. The general dosage (supply form) is 1.0-1.5% in emulsion paints and in acrylic lacquers, and 0.25% in alkyd lacquers. The additive can also be used as a dispersing agent in water-based pigment preparations, suitable for organic pigments and carbon blacks. Emulsogen TS 200 is recommended for POS-colorants as well as for concentrates for in-plant tinting. The general dosage recommendation is 5-30% on organic pigments and 20-40% on carbon black.Furthermore, Emulsogen TS 200 acts as a nonionic emulsifier for the emulsion polymerization of monomers like acrylates, styrene-acrylates, and vinyl acetate.

Genapol O 080 is a nonionic wetting agent for use as compatibilizer in waterborne high PVC paints, as well as in waterborne low PVC lacquers. The general dosage (supply form) is 0.5-1.0% in emulsion paints and 1.0-1.5% in acrylic lacquers.

Dispersogen PLF 100 是一种聚合物型分散剂。它在色浆制造过程中具有优异的储存稳定性、着色强度和低发泡性。当用于成品涂料时，它在外墙涂料表现出良好的粘度稳定性和耐雨痕能力 Dispersogen PLF 100 不仅可用于有机颜料，还可用于特定的无机颜料和炭黑。它无APEO/NPEO，低VOC，并且无有害的有机溶剂和化学成分。Dispersogen PLF 符合欧盟环保标签 (Ecoflower)、德国蓝色天使 (Blue Angel) 和北欧白天鹅 (Nordic Swan) 的标准。

Dispersogen LFH 是一种水性颜料制备物专用的阴离子表面活性剂类分散剂，适用于无机和有机颜料以及炭黑。Dispersogen LFH 推荐用于销售点着色剂和厂内着色专用浓缩物，可结合非离子分散剂（如 Dispersogen MT 200）使用。 推荐用量通常为：有机颜料 4-20%；无机颜料 1-6%。

Dispersogen PTS is a nonionic, surfactant based dispersing agent for water-based pigment preparations, suitable for organic pigments and carbon blacks.The product is recommended for use in point-of-sales colorants and concentrates for in-plant tinting. The general dosage recommendation is 5-40% on organic pigments.

Dispersogen PL 30 是一种水性颜料制备物专用的非离子聚合物分散剂，适用于有机颜料和特种炭黑。该产品推荐用于工厂调色的颜料浓缩物。 有机颜料的推荐用量通常为 10 - 40%。 Dispersogen PL 30 也可作为润湿剂/相容剂，用于水性高PVC含量的涂料以及水性或溶剂型低PVC油漆中。通常用量为：乳胶漆 0.5-1.0% ，丙烯酸漆 1.0-1.5%，醇酸漆 0.25-0.5%。

Dispersogen ECS is an anionic, surfactant-based dispersing agent for water-based and solvent-based pigment preparations, suitable for organic pigments and specialty carbon blacks. The product is especially recommended for use in in-plant tinters. The general dosage recommendation is 20 - 50 % on organic pigments. Dispersogen ECS also acts as wetting agent/compatibilizer in waterborne high PVC paints as well as in waterborne and solvent-borne low PVC lacquers. The general dosage (in supply form) is 1.7-3.3% in emulsion paints, 3.3-5.0% in acrylic lacquers and 0.85-1.7% in alkyd lacquers.

Emulsogen TS 200 is a nonionic wetting agent for use as a compatibilizer in waterborne high PVC paints, as well as in waterborne and solvent-borne low PVC lacquers. The general dosage (supply form) is 1.0-1.5% in emulsion paints and in acrylic lacquers, and 0.25% in alkyd lacquers. The additive can also be used as a dispersing agent in water-based pigment preparations, suitable for organic pigments and carbon blacks. Emulsogen TS 200 is recommended for POS-colorants as well as for concentrates for in-plant tinting. The general dosage recommendation is 5-30% on organic pigments and 20-40% on carbon black.Furthermore, Emulsogen TS 200 acts as a nonionic emulsifier for the emulsion polymerization of monomers like acrylates, styrene-acrylates, and vinyl acetate.

Methoxy polyethylene glycols ether with a molecular weight of 350 - 2000 g/mole are commonly used as a chemical intermediate in the production of alkyd emulsions and HEUR thickener.

Polyglykols with a molecular weight of 6000 to 12000 g/mole are commonly used as chemical intermediate in the production of HEUR thickener.

Emulsogen EPA 073 作为阴离子乳化剂，用于纯丙烯酸酯、苯乙烯-丙烯酸酯和醋酸乙烯酯等单体的乳液聚合。

Emulsogen EPN 287 is used as nonionic emulsifier for the emulsion polymerization of monomers like acrylates, styrene-acrylates, styrene-butadiene and vinyl acetate.

Emulsogen LCN 118 作为乳液聚合工艺专用的非离子乳化剂，可改进聚合物分散剂的剪切、温度和电解质稳定性。推荐用量为 2% 基于各种单体的活性成分。EmulsogenLCN 118 能够作为增容剂用于水性和溶剂型清漆（低 PVC），以改进着色力并减轻磨损、吸水性和雾度效应。 用量建议（供应形态）：水性丙烯酸漆为 1.3-1.9%；溶剂型酚醛漆为 0.33-0.66%。 Emulsogen LCN 118 可作为加工助剂，在生产水性乳胶漆（高 PCV）的预混合阶段使用，有助于加快 TiO2 和填料的解聚，从而缩短研磨时间。本品在水质较硬的地区使用尤其占据优势。该用途的推荐用量（供应形态）通常为 0.3%。

Emulsogen LCN 158 is used as a nonionic emulsifier for emulsion polymerization improving the shear, temperature and electrolyte stability of polymer dispersions. The recommended usage is 2% active based on monomers. In waterborne and solvent-borne lacquers (low PVC), Emulsogen LCN 158 can be used as a compatibilizer to improve tinting strength and to reduce rub-out, water absorption, and haze effects. Dosage recommendation (supply form) in waterborne acrylic lacquers is 1.3-1.9% and in solvent-borne alkyd lacquers 0.33-0.66%.When used during the premixing phase in the production of waterborne emulsion paints (high PVC), Emulsogen LCN 158 also acts as a processing aid and helps to reduce the grinding time by faster deagglomeration of TiO2 and fillers. This is especially of interest in areas of hard water. The general dosage recommendation (supply form) for this purpose is 0.3%.

Emulsogen LCN 287 作为非离子乳化剂，用于丙烯酸酯、苯乙烯-丁二烯酯和醋酸乙烯酯等单体的乳液聚合。 它改进了聚合物分散剂的剪切、温度和电解质稳定性。推荐用量为 1-3% 基于各种单体的活性成分。Emulsogen LCN 287 还可在水性丙烯酸漆中充当润湿剂/增容剂（低 PVC）。该用途的用量（供应形态）通常为 1.4%-2.1%。 该产品适用于申请蓝色天使或欧洲之花等环保标签的低气味涂料。

Emulsogen LCN 407 作为非离子乳化剂，用于丙烯酸酯、苯乙烯-丙烯酸酯和醋酸乙烯酯等单体的乳液聚合。

JMAC Composite PG is a preservative active with antimicrobial properties that reduces the spread of bacteria over the long term. The attractiveness of JMAC’s antimicrobial protection is reinforced by its low toxicity, non-sensitizing performance and very low environmental impact. JMAC meets Ecolabel standards for use in paints and coatings. Paint and coatings manufacturers benefit from easy and economical formulation. The JMAC biocides are effective at very small ppm addition levels and offer low viscosity liquid dispersion. Safe handling is assured through the non-flammability, non-corrosive nature of JMAC. For In-can preservation, the excellent thermal and pH stability of JMAC biocides means they can be used in a wide range of industrial applications, such as polymer emulsions, paints, sealants and adhesives.

JMAC LP 10 是一种具有抗菌特性的防腐剂，可长期减少细菌的传播。JMAC 抗菌保护的魅力因其低毒性、非致敏性能和极低的环境影响而得到增强。JMAC 符合油漆和涂料适用的生态标签标准。 JMAC 还适用于家庭护理应用。