D-FOAM-R B2552 is a 100% synthetic base, silicone free foam control additive. It is used to
provide rapid air release in a wide range of construction materials including mortar mixes, self
leveling cements, plaster and polymer modified concrete. D-FOAM-R B2552 is compatible and can
be mixed with PCE-Superplasticizers to prevent entrapped air formation.
D-FOAM-R B2525 is a 100% synthetic base, silicone free foam control additive. It is used to provide rapid air release in a wide range of construction materials including mortar mixes, self leveling cements, plaster and polymer modified concrete. D-FOAM-R B2525 is compatible and can be mixed with PCE-Superplasticizers to prevent entrapped air formation
D-FOAM-R B075 is an economical, silicone free, dry defoamer formulated to provide rapid air release in a wide range of construction materials including mortar mixes, self leveling cements, plaster and polymer modified concrete. D-FOAM-R B075 provides excellent entrained air control with polyvinyl alcohol, PVA and EVA containing blends.
Polyglycol DME 1000 can be used as an inert high-temperature solvent, as a plasticizer for polymers or PTC as a cost-effective alternative to crown-ethers and as an additive for electroplating
JMAC S 10 is a preservative active with antimicrobial properties that reduces the spread of bacteria over the long term. The attractiveness of JMAC’s antimicrobial protection is reinforced by its low toxicity, non-sensitizing performance and very low environmental impact. JMAC meets Ecolabel standards for use in paints and coatings. Paint and coatings manufacturers benefit from easy and economical formulation. The JMAC biocides are effective at very small ppm addition levels and offer low viscosity liquid dispersion. Safe handling is assured through the non-flammability, non-corrosive nature of JMAC. For In-can preservation, the excellent thermal and pH stability of JMAC biocides means they can be used in a wide range of industrial applications, such as polymer emulsions, paints, sealants and adhesives.
Polyphosphoric acids are odourless, high viscousity liquids with strong hygroscopic properties. Phosphoric acids with < 95% H3PO4 (68% P2O5) contain the simple orthophosphoric acid. At higher concentrations the acid consists of a mixture of ortho, pyro, tri, tetra and highly condensed phosphoric acids. For this reason acids with a concentration > 68% P2O5 are commonly known as polyphosphoric acids. Polyphosphoric acids are miscible with water, hydrolysing to orthophosphoric acid with the generation of heat. They are insoluble in hydrocarbons and halogenated hydrocarbons.
Polyphosphoric acids are odourless, high viscousity liquids with strong hygroscopic properties. Phosphoric acids with < 95% H3PO4 (68% P2O5) contain the simple orthophosphoric acid. At higher concentrations the acid consists of a mixture of ortho, pyro, tri, tetra and highly condensed phosphoric acids. For this reason acids with a concentration > 68% P2O5 are commonly known as polyphosphoric acids. Polyphosphoric acids are miscible with water, hydrolysing to orthophosphoric acid with the generation of heat. They are insoluble in hydrocarbons and halogenated hydrocarbons.
SOLVTREAT DF 12086 is an organic solvent formulated for use with oil soluble production chemicals. The solvent provides cleaning and preventative maintenance for chemical umbilicals and capillary injection strings. It reduces the risk of costly injection system failures through effective removal of solids and chemical by-products. The product is filtered to less than NAS 8 specifications and manufactured using select grades of raw materials.
Licomont NaV 101 是一种褐煤酸钠盐
Licomont NaV 101 适用于PET和PBT的成核剂。由于具有高分子量，在成品中表现出低挥发性和优越的耐迁移特性。 Licomont NaV 101 除了优异的成核效果外，还具有出色的润滑和脱模效果。用于聚酯时，Licomont NaV 101 的添加浓度为 0.1% 至 0.4%即有效。
Für eine hocheffiziente Abwasseraufbereitung: SÜDFLOCK™ von Clariant Functional Minerals
SÜDFLOCK™ K2 ist ein Allround-Fällungsmittel in kommunalen und industriellen Kläranlagen. Die ausgewogene Mischung aus Magnesium-, Kalzium-, Eisen- und Aluminiumsalzen sorgt für eine ebenso effiziente wie wirksame Ausfällung der Phosphationen aus dem Abwasser. Die für Blähschlamm- und Schlackenbildung verantwortlichen Fadenbakterien werden stark reduziert. Ein weiterer Vorteil: Es werden kollodiale Partikel im Abwasser ausgeflockt und so der Anteil an Feststoffen vermindert. Gerne beraten Sie unsere Spezialisten und unterstützen Sie, die optimale Dosierung und den idealen Zeitpunkt für die Beimischung von SÜDFLOCK™ K2 zu finden.
Dare to drill: BENTONIL™ and MONTIGEL™ civil engineering additives by Clariant
Natural BENTONIL™ and TIXOTON™ drilling additives are based on selected bentonite clays and tailored to suit the most demanding civil engineering applications – from tunneling, pipe jacking, horizontal directional drilling (HDD) and vertical drilling to special foundations. A wide range of grades, a global production and sales network, and unrivalled application knowledge – civil engineers rest assured that Clariant can support any project, wherever, whatever.
And when it comes to put things to a final rest, count on Montigel™ soil sealing and geotextile bentonites. With our raw material millions of years old, chances are that whatever you want to keep away from the biosphere will stay away.
Hostagliss™ PA 135 is a polar polymer with multiple functional groups exhibiting a high affinity to metal surfaces.
Hostagliss™ PA 135 has good lubricity and anti-wear properties and is used as a component for non-water miscible metal working fluids such as cutting oils or deep drawing oils.
Other applications are rolling emulsions, gear oils and greases.
Dare to drill: BENTONIL™ and MONTIGEL™ civil engineering additives by Clariant Functional Minerals
Natural BENTONIL™ and TIXOTON™ drilling additives are based on selected bentonite clays and tailored to suit the most demanding civil engineering applications – from tunneling, pipe jacking, horizontal directional drilling (HDD) and vertical drilling to special foundations. A wide range of grades, a global production and sales network, and unrivalled application knowledge – civil engineers rest assured that Clariant can support any project, wherever, whatever.
And when it comes to put things to a final rest, count on Montigel™ soil sealing and geotextile bentonites. With our raw material millions of years old, chances are that whatever you want to keep away from the biosphere will stay away.
Natural molding sand additives for superior quality in precision castings: ECOSILECOSIL lustrous carbon former adds the finishing touch, ensuring easy mold separation, improved surfaces and increased mold stability. Our unique eco-friendly technology, ECOSIL LE, drastically reduce emissions and help foundries comply with highly demanding environmental regulations and standards. This is our two-tiered Bentonite solution to provide a one-of-a-kind efficient molding system.
Discover LE Technology
Hostagliss™ DHSZ is a complex ester and can be used as lubricity improver in rolling emulsions and cutting & forming fluids. Despite its high vicosity, it can be easily incorporated into concentrates for water based emulsions. The product contributes to emulsion stability and corrosion protection when neutralized with alkanolamines.
Hostagliss™ A is a complex ester and can be used as lubricity improver in rolling emulsions and cutting & forming fluids. Despite its high viscosity, it can be easily incorporated into concentrates for water based emulsions. The product contributes to emulsion stability and corrosion protection when neutralized with alkanolamines.
Hostagliss 1510 is used as lubricity improver in rolling emulsions and cutting & forming fluids. It is a polar polymer of high molecular weight and with multiple functional groups exhibiting a high affinity to metal surfaces. Due to the products high degree of saturation, it shows an excellent oxidative and thermal resistance but also hydrolytical stability.
The alkali and alkaline earth salts of Hostagel™ HT 300 are used as gel-forming agents or thickeners for the production of greases for special applications at high and low temperatures, exposure to high pressure, high and low revolutions, aggressive media, etc.The average concentration used is 10 % by weight, calculated on the liquid basestock. These so-called terephthalamate greases have relatively high drop points, very good water stability and low penetration values.Depending on the property and application of the grease, mineral oils as well as synthetic oils such as dicarboxylicacid esters, silicones/siloxanes, polyalkylene glycols, polyalphaolefines, alkyl benzenes and polyalkylene ethers can be used as basestocks.
Hordaphos MDB is a multi-functional additive which can be used in various applications, especially in printing inks, paints and coatings. It is a clear, colourless to yellowish liquid with an ester-like odour. For more details see our Video about Hordaphos.
Hordaphos™ 145 is an efficient EP/AW additive with emulsification as well as corrosion inhibiting properties for ferrous metals and aluminium alloys. It is used for metal working fluids (emulsions, semi-synthetic, neat oil), rolling emulsions and fire-resistant hydraulic fluids (HFA-E). To some extent the performance depends on the amine chosen for neutralization and can be boosted by combining Hordaphos™ 145 with esters, especially with TMP-trioleate.
Genapol XM 150 is a methyl-end-capped ethoxylate based on Genapol X 150 which can enable the formulation of very sensitive active ingredients in non-aqueous formulations like ECs and ODs.
Synergen™ W 06 is an excellent wetting agent to be used in EC or SC formulations or as tank-mix adjuvants to increase wetting of the plant surface. It does not require a hazardous labeling.
Hostaphat 1322 is an efficient EP/AW additive with emulsification as well as corrosion inhibiting properties for ferrous metals and aluminum alloys. It is used for metal working fluids (emulsions, semi-synthetic) as well as for rolling emulsions and rolling oils.
Synergen™ GL 5 is a polyglycerol ester-based adjuvant with unique combination of proven adjuvant performance and dispersing power. It is label-free, derived from renewable resources and can be used in a wide range of formulation types.
Sapogenat™ T products are the best- performing NPE alternatives. Besides excellent emulsification power, these surfactants are also good wetters, increasing pesticide efficacy in foliar application.
Sapogenat™ T products are the best- performing NPE alternatives. Besides excellent emulsification power, these surfactants are also good wetters, increasing pesticide efficacy in foliar application.
Licocene PE MA 4351 颗粒是一种高马来酸酐接枝的聚乙烯蜡，具有优越的物理特性，g. 适用于粉末涂料应用的特性。马来酸酐改性聚乙烯可以与二氧化钛表面形成结构性界面相结合 粗糙程度取决于二氧化钛与 Licocene PE MA 4351 颗粒的加入比例。
Licocene PE MA 4351 颗粒，在填充了玻纤、木纤维、天然纤维和无机材料填充的聚乙烯改性料中，是一种高效偶联剂
Licolub WE 4 粉末是含有多元醇的褐煤酸酯。Licolub WE 4 具有极性中心和较长的非极性烃链，其在加工工程树脂（尤其聚酯改性料）和聚氯乙烯时，兼具内外润滑效应，并以外润滑为主。
在用于压延硬质聚氯乙烯薄膜时，Licolub WE 4 粉末具有出色的润滑特性，并且热稳定性高而挥发性低。
Polyglykol D21/700 is a polyalkylene glycol (PAG) to be used as synthetic base fluid in high performance lubricants with low friction coefficients, excellent wear properties and good thermal stability.
Sapogenat™ T products are the best- performing NPE alternatives. Besides excellent emulsification power, these surfactants are also good wetters, increasing pesticide efficacy in foliar application.
Hordaphos MOB is a multi-functional additive for various applications, especially for printing inks, paints and coatings. It is a clear, colourless to yellowish liquid with an ester-like odour.For more details see our Video about Hordaphos.
Hordaphos CC MS is recommended as a base component for acidic cleaners for the sanitary sector, automotive and food processing industries. It is a clear, colourless to yellowish liquid with an ester-like odour. The product is miscible in any ratio with water. For more details see our Video about Hordaphos.
Hordaphos CC MN is recommended as a base component for acidic cleaners for sanitation, automotive and food processing industries. It is a clear, colourless to yellowish liquid with an ester-like odour. The product is miscible in any ratio with water.For more details see our Video about Hordaphos.
Hordaphos CC MIS is recommended as a base component for acidic cleaners, e.g. for sanitation, automotive and food processing industries. It is a clear, colourless to yellowish liquid with an ester-like odour. The product is miscible with water in any ratio. For more details see our Video about Hordaphos.
Hordaphos CC MIN is recommended as a base component for acidic cleaners, e.g. for sanitation, automotive and food processing industries. It is a clear, colourless to yellowish liquid with an ester-like odour. The product is miscible with water in any ratio.For more details see our Video about Hordaphos.
Hostagel VB is an environmentally friendlier low-VOC and solvent-free choice for breaking the viscosity of concentrated dishwashing liquids. It additionally prevents drying of skin and enhances mildness of formulation.
Desiccant cartridges provide protection against moisture related issues for a wide range of applications in containers, cases, electrical and optical devices.
Clariant´s range contains different designs and finishes:
Desiccant cartridges come with Molecular Sieve fill or Silica Gel fill due to different specification or end uses. Most of our desiccant cartridges are designed to meet military specifications and are listed under a NATO-Stock- Number (NSN). Special designs are available on demand and reflect a customized development based on our experience.
Hostavin N 392 micro powder is a mixture of the oligomeric HALS Hostavin N 30 and a wax to improve distribution of the product in the resin. The fine particle size of Hostavin N 392 micro powder in combination with a carefully selected wax leads to a significant improvement in the distribution of the light stabilizer in the resin even in applications without strong mechanical mixing efforts like rotomoulding or sintering.
Hostavin 3065 LIQ is a 100% liquid low molecular weight hindered amine light stabilizer (HALS). It is a basic HALS characterized by its good solubility, broad compatibility and good stabilization efficiency in a wide range of coating systems.
The Genapol X products combine low-foam emulsification and wetting properties which make them the first choice for many NPE-free formulations as emulsifier, wetting Agent and Adjuvant.
TONSIL ™ CO series catalysts have been establishing an outstanding status around the world. The Tonsil series has multiple products for each process to meet the different requirements in terms of activity and selectivity. Generally, Tonsil catalysts contain less side reaction active sites and have high surface area and superior pore properties. Those properties ensure the long cycle time of Tonsil catalysts, thus reduce the number of change outs and operation cost, increase the operation efficiency and reduce energy consumption. Clariant has years of experience in aromatics treatment and is committed to continuously improve these materials to adapt them to the increasing requirements of the petrochemical industry.
TONSIL ™ APT series catalysts have their basis on the expertise which was gained with the TONSIL™ CO series. The Tonsil APT series has multiple products for each process to meet the different requirements in terms of activity and selectivity. Generally, Tonsil catalysts contain less side reaction active sites and have high surface area and superior pore properties. Those properties ensure the long cycle time of Tonsil catalysts, thus reduce the number of change outs and operation cost, increase the operation efficiency and reduce energy consumption. Clariant has gained now also with APT series years of experience in aromatics treatment.
TONSIL™ APT series has several advantages over the TONSIL™ CO series.
No sand grading is required - Loading procedure is less complex without sand grading
Higher bulk density
Longer cycle life
Less start-ups and shut-downs
Lower pressure drop
Lower energy consumption
Finally leads to lower CAPEX and OPEX over the whole year
Exolit AP 742 是一种基于聚磷酸铵的非卤添加型阻燃剂，通过磷/氮协同作用发挥效力。Exolit AP 742 的作用方式与其他阻燃技术（例如，含氯或含溴和矿物类阻燃剂）的不同之处在于它是通过膨胀发挥效力的。这种阻燃材料遇火就会发泡。如此形成的碳泡沫层通过其隔热效果保护聚合物并减少进一步的氧气进入。
按下“打印本页”按钮，下载产品数据表。
TONSIL ™ CO series catalysts have been establishing an outstanding status around the world. The Tonsil series has multiple products for each process to meet the different requirements in terms of activity and selectivity. Generally, Tonsil catalysts contain less side reaction active sites and have high surface area and superior pore properties. Those properties ensure the long cycle time of Tonsil catalysts, thus reduce the number of change outs and operation cost, increase the operation efficiency and reduce energy consumption. Clariant has years of experience in aromatics treatment and is committed to continuously improve these materials to adapt them to the increasing requirements of the petrochemical industry.
TONSIL ™ APT series catalysts have their basis on the expertise which was gained with the TONSIL™ CO series. The Tonsil APT series has multiple products for each process to meet the different requirements in terms of activity and selectivity. Generally, Tonsil catalysts contain less side reaction active sites and have high surface area and superior pore properties. Those properties ensure the long cycle time of Tonsil catalysts, thus reduce the number of change outs and operation cost, increase the operation efficiency and reduce energy consumption. Clariant has gained now also with APT series years of experience in aromatics treatment.
TONSIL™ APT series has several advantages over the TONSIL™ CO series.
No sand grading is required - Loading procedure is less complex without sand grading
Higher bulk density
Longer cycle life
Less start-ups and shut-downs
Lower pressure drop
Lower energy consumption
Finally leads to lower CAPEX and OPEX over the whole year
TONSIL ™ CO series catalysts have been establishing an outstanding status around the world. The Tonsil series has multiple products for each process to meet the different requirements in terms of activity and selectivity. Generally, Tonsil catalysts contain less side reaction active sites and have high surface area and superior pore properties. Those properties ensure the long cycle time of Tonsil catalysts, thus reduce the number of change outs and operation cost, increase the operation efficiency and reduce energy consumption. Clariant has years of experience in aromatics treatment and is committed to continuously improve these materials to adapt them to the increasing requirements of the petrochemical industry.
OleMax™ 260 is a new generation selective acetylene hydrogenation catalyst designed for ethylene production using front-end process configurations. While OleMax series catalysts have been proven in commercial operation for decades, the new catalyst offers ultra-high selectivity for acetylene hydrogenation yet virtually no reactivity with ethylene. This maximizes product yields while minimizing energy and raw material consumption.Moreover, the promoted-palladium catalyst all but eliminates the risk of runaways by pushing runaway temperature far beyond standard operating temperature. The exceptional selectivity and consequent stability of OleMax 260 ensures reliable, on-specification performance over an unprecedentedly wide operating range, even at the extremely low CO levels typical of new cracking furnace technologies.
Dispersogen AN 200 is a surfactant-based dispersing agent for water-based and solvent-based pigment preparations, suitable for inorganic and organic pigments as well as for specialty carbon blacks. The product is especially recommended for use in point-of-sales colorants and concentrates for in-plant tinting. The general dosage recommendation is 10-50 % on organic pigments and 5-20% on inorganic pigments. Dispersogen AN 200 also acts as wetting agent/compatibilizer in waterborne high PVC paints as well as in waterborne and solvent-borne low PVC lacquers. The general dosage (supply form) is 0.6-1.9% in emulsion paints, 1.5-1.9% in acrylic lacquers and 1.3-1.9% in alkyd lacquers.
Polyglykol D21/150 is a polyalkylene glycol (PAG) to be used as synthetic base fluid in high performance lubricants with low friction coefficients, excellent wear properties and good thermal stability.
Licowax KLE flakes is an emulsifier containing montan ester wax.
Minimize your environmental footprint with Licocare™ RBW Vita—a sustainable, bio-based wax derived from renewable rice bran oil, a byproduct of rice processing.It provides similar functionality while meeting sustainability targets. Contact us for more information or to request a sample.
Polyglykol D21/220 is a polyalkylene glycol (PAG) to be used as synthetic base fluid in high performance lubricants with low friction coefficients, excellent wear properties and good thermal stability.
Sapogenat™ T products are the best- performing NPE alternatives. Besides excellent emulsification power, these surfactants are also good wetters, increasing pesticide efficacy in foliar application.
Polyglykol D01/240 is a polyalkylene glycol (PAG) to be used as synthetic base fluid in high performance lubricants with low friction coefficients, excellent wear properties and good thermal stability.
Licowax E powder is an ester of montanic acids with multifunctional alcohols. The montanic acids contained in raw montan wax are straightchain, unbranched monocarboxylic acids with a chain length in the range of C28-C32. As a result of the long chain these montanic acids have a high thermostability and a low volatility as well as a low tendency to migration. Licowax E powder is used as lubricant and dispersing agent in a wide variety of polymers like PVC, PS, PBT, PA, PDM, PC, TPU.Minimize your environmental footprint with Licocare™ RBW Vita - a sustainable, bio-based wax derived from renewable rice bran oil, a byproduct of rice processing. It provides similar functionality while meeting sustainability targets. Contact us for more information or to request a sample.
Hordaphos 124 is a yellowish to brown liquid with an ester-like odour. Solid particles may be precipitated at low temperatures but this process is reversible on warming. Hordaphos 124 is soluble in common organic solvents such as aliphatic and aromatic hydrocarbons, chlorinated hydrocarbons, esters and ketones. It can be emulsified with water. Hordaphos 124 is miscible with naphthenic and paraffinic mineral oils and with commercial vegetable and animal oils. Despite this good compatibility its miscibility with mineral oils and other additives used should be tested before use. For more details see our Video about Hordaphos.
Licowax E 片状颗粒是一种含有多功能醇的褐煤酸酯。粗褐煤蜡中所含的褐煤酸为直链、无支链的一元羧酸，链长为 C28-C32。此类褐煤酸为长链羧酸，因而具有很高的热稳定性和低挥发性，而且迁移性也很低。Licowax E 片状颗粒可作为润滑剂和分散剂，用于聚氯乙烯、聚苯乙烯、聚对苯二甲酸丁二醇酯、聚酰胺、三元乙丙胶、聚碳酸酯和热塑性聚氨酯等各类聚合物。Licowax E 片状颗粒还可用于抛光和护理行业，例如鞋类和皮革保养、汽车保养。它是一种硬的酯蜡，有很好的成膏特性，而且容易乳化。如需了解更多信息或索取样品，请点击“联系我们”并给我们发送消息。
Licowax KST is an ester of montanic acids with multifunctional alcohols with a very low drop point.
Minimize your environmental footprint with Licocare™ RBW Vita—a sustainable, bio-based wax derived from renewable rice bran oil, a byproduct of rice processing.It provides similar functionality while meeting sustainability targets. Contact us for more information or to request a sample.
Polyglykol D21/300 is a polyalkylene glycol (PAG) to be used as synthetic base fluid in high performance lubricants with low friction coefficients, excellent wear properties and good thermal stability.
Licowax KSL flakes is an ester of montanic acids with multifunctional alcohols.
Minimize your environmental footprint with Licocare™ RBW Vita—a sustainable, bio-based wax derived from renewable rice bran oil, a byproduct of rice processing.It provides similar functionality while meeting sustainability targets. Contact us for more information or to request a sample.
Polyglykol B11/70 is a polyalkylene glycol (PAG) to be used as synthetic base fluid in high performance lubricants with low friction coefficients, excellent wear properties and good thermal stability.
Sapogenat™ T products are the best- performing NPE alternatives. Besides excellent emulsification power, these surfactants are also good wetters, increasing pesticide efficacy in foliar application.
Sapogenat™ T products are the best- performing NPE alternatives. Besides excellent emulsification power, these surfactants are also good wetters, increasing pesticide efficacy in foliar application.
Polyglykol P41/3000 is a water-soluble polyalkylene glycol (PAG) to be used as thickener in fire-resistant hydraulic fluids and in water-based quenchants.
Nipacide MBM is a low toxicity biocide developed for use in metal working concentrates.
Nipacide MBM is effective against a wide range of microorganisms including gram positive and gram negative bacteria, yeast and fungi. Microorganisms grow at a rapid rate and without use of the correct biocide, numbers can increase dramatically.
Licowax LP flakes is a montanic acid wax.
Minimize your environmental footprint with Licocare™ RBW Vita—a sustainable, bio-based wax derived from renewable rice bran oil, a byproduct of rice processing.It provides similar functionality while meeting sustainability targets. Contact us for more information or to request a sample.
High foaming primary surfactant for hand dishwashing liquids. Low stickiness to textile fibres; especially for carpet and upholstery cleaners . Low tendency to build up viscosity therefore suitable for use in I&I cleaners .
Exolit AP 462 是一种基于聚磷酸铵的产品。晶体类型为 II 型。它是根据科莱恩自有的方法，采用聚磷酸铵，通过三聚氰胺树脂微包覆工艺制造而成。Exolit AP 462 是一种细粒径白色粉末，即使在高温下也具有极低的水溶性。它完全不溶于有机溶剂。该产品不吸湿且不易燃。
按下“打印本页”按钮，下载产品数据表。
Polyglykol P41/12000 M80 is a water-soluble polyalkylene glycol (PAG) to be used as thickener in fire-resistant hydraulic fluids and in water-based quenchants.
Licocene PP 2402 granules Terra ISCC PLUS is a low crystalline metallocene-technology based propylene-ethylene-copolymer, made from mass balance-certified renewable propylene and ethylene.
Licocene PP 1602 granules Terra ISCC PLUS is a low melting, metallocene-technology based propylene-ethylene copolymer, which exhibits a low degree of crystallinity, made from mass-balanced certified renewable propylene and ethylene.
Dispersogen LFA is used as anionic emulsifier for the emulsion polymerization of vinyl acetate dispersions.
Dispersogen LFA is also suitable for emulsion paints to improve the paint freeze-thaw resistance and to reduce solvent use level in the paint formulation.
Polyglykol PE-K 270 is a high performance lubricant especially designed for the use in high pressure production processes of low density polyethylene (LDPE). It is a polyalkylene glycol (EO/PO random copolymer) with an excellent intrinsic lubricity and a high viscosity index, showing a favorable pressure-viscosity relationship.
Polyglykol B11/50 is a polyalkylene glycol (PAG) to be used as synthetic base fluid in high performance lubricants with low friction coefficients, excellent wear properties and good thermal stability.
Polyglykol B11/30 is a biodegradable polyalkylene glycol (PAG) to be used as synthetic base fluid for high performance lubricants with high viscosity index, excellent wear properties and good thermal stability.
Polyglykol B01/240 is a polyalkylene glycol (PAG) to be used as synthetic base fluid for high performance lubricants with low friction coefficients, excellent wear properties and good thermal stability.
Clariant Oil Services’ FLOTREAT range of downhole treatments removes and prevents asphaltene deposits and resolves emulsions that have formed in the near-wellbore.
Clariant Oil Services’ FLOCTREAT water clarification technologies were designed to remove contaminants of residual oil and solids in produced water, while meeting regulatory requirements.
Clariant Oil Services’ DISSOLVAN demulsifier base chemistry technology has been used in finished demulsifier products to successfully separate the world’s oil from water for more than 50 years—from the lightest sweet crudes to the heaviest sour crudes, from Alaska to the Far East—and in compliance with some of the most stringent environmental regulations.
Polyglykol 200 LVC is a very low-VOC humectant for water-borne pigment preparations with little impact on wet scrub resistance. Polyglykol 200 LVC retards the drying of pigment pastes and forms a soluble film of the pigment preparation. Polyglykol 200 LVC prevents the clogging of the nozzles of tinting systems and metering machines.
Polyglykol D21/100 is a polyalkylene glycol (PAG) to be used as synthetic base fluid in high performance lubricants with low friction coefficients, excellent wear properties and good thermal stability.
Genapol O 100 is a nonionic wetting agent for use as compatibilizer in waterborne high PVC paints, as well as in waterborne and solvent-borne low PVC lacquers. The general dosage (supply form) is 0.5-1.5% in emulsion paints and 1.0-1.5% in acrylic lacquers, and 1.5% in alkyd lacquers.
Genapol O 080 is a nonionic wetting agent for use as compatibilizer in waterborne high PVC paints, as well as in waterborne low PVC lacquers. The general dosage (supply form) is 0.5-1.0% in emulsion paints and 1.0-1.5% in acrylic lacquers.
Polyglykol B01/150 is a polyalkylene glycol (PAG) to be used as synthetic base fluid in high performance lubricants with low friction coefficients, excellent wear properties and good thermal stability.
Hostagliss TPO-V 68 is a polyol ester and used as synthetic base fluid and lubricating component for rolling fluids, cutting & forming fluids and fire resistant hydraulic fluids.
Clariant Oil Services’ WellBoost chemical foamer technologies for gas well deliquification are custom-designed, cost- effective solutions that help maximize gas production and increase profits.
Clariant Oil Services’ BIOTREAT bacteria control technologies prevent microbiological-induced corrosion, system biomass fouling, process plugging and reservoir and process H2S production, as well as controls iron sulfide deposition.
GlucoPure Wet is a mild sugar surfactant with excellent cleaning and wetting ability. It is designed for the use in hard surface cleaners and especially suitable for bathroom cleaners with a mild pH value and all purpose cleaners. GlucoPure Wet combines fast soap scum removal and mildness to plastic or metal materials.
GlucoPure Deg perfectly combines sustainability and performance for Hand Dishwashing Liquid Detergents. The mild sugar surfactant provides a superior foaming profile and outstanding ecological profile. Therefore it is especially suitable for the use as co-surfactant in natural, mild and ecofriendly hand dishwashing detergents. Due to its high active level and water-free formulation it is the perfect choice for concentrated formulation in pouches, pads or for self-dilution.
GlucoPure Foam perfectly combines sustainability and performance for Hand Dishwashing Liquid Detergents. The mild sugar surfactant provides a superior foaming profile and outstanding ecological profile. Therefore it is especially suitable for the use as co-surfactant in natural, mild and ecofriendly hand dishwashing detergents. GlucoPure Foam is based on coconut oil and is therefore suitable for palm-free detergents.
Nipacide CFX is an in-can biocide based on formaldehyde + chloromethyl and methylisothiazolinone.
Nipacide CFX is water based low toxicity isothiazolinone/ formaldehyde donor biocide, developed for the complete in-can and head space protection of water based products. Nipacide CFX is effective against a wide range of microorganisms including gram positive and gram negative bacteria, yeast and fungi.
When products are prone to surface contamination by fungi and head space protection is required, Nipacide CFX should be the biocide of choice. Nipacide CFX is effective against a wide range of spoilage organisms effective over a wide pH and temperature range.
Clariant Oil Services’ HOSTADRILL technologies are HT/HP fluid loss
additives for drilling applications that improve operations and achieve
optimum results.
Safeway™ SF is an advanced sodium formate-based runway and apron de-icing solid. The formulation makes Safeway SF an extremely effective and easy applicable de-/anti-icing product that gives long-term protection against snow, slush, and ice.
Safeway™ KF HOT is an advanced, formate-based runway de-icing solution. The fluid not only uses the HOT formulation, but it also contains approximately 5 % less water than standard de-icers. This optimizes runway friction, surface coverage, ease of slush/ice removal and overall de-/anti-icing performance.
Safeway™ KF is an advanced formate based runway de-icing solution. The formulation gives the fluid an outstanding wetting performance, ensuring maximum surface coverage, optimizing friction values and de-/anti-icing performance.
Emulsogen™ 3971 N is an emulsifier package with good corrosion protecting properties for milky, opaque and transparent metal working fluids and fire resistant hydraulic fluids. Emulsogen™ 3971 N is dispersible in water and in mineral oil. Mineral oil based formulations show no gelation tendency, form spontaneously emulsions and are stable in hard water.
Safeway™ KA HOT is an advanced acetate-based runway de-icing solution. The HOT formulation gives the fluid an outstanding wetting performance, ensuring maximum surface coverage, optimizing friction values and de-/anti-icing performance, as well as reducing corrosion and environmental impact.
Safewing™ MP IV LAUNCH PLUS is your preferred choice for a modern Deicing/Anti-Icing Fluid. Due to its outstanding shear stability and product properties, this fluid is setting new standards among the aviation industry. This propylene glycol-based fluid can be applied hot or cold, neat or diluted. It is designed to combine a low viscosity profile with outstanding product performance. Safewing™ MP IV LAUNCH PLUS is approved according to AMS 1428.
Genapol EC 50 is an excellent low foaming surfactant and rinse aid for multifunctional automatic dishwashing detergents. It provides great overall rinse performance and superior drying performance also on plastic items.
Safewing™ MP IV LAUNCH is your preferred choice for a modern Deicing/Anti-Icing Fluid. Due to its outstanding shear stability and product properties, this fluid is setting new standards among the aviation industry. This propylene glycol-based fluid can be applied hot or cold, neat or diluted. It is designed to combine a low viscosity profile with outstanding product performance. Safewing™ MP IV LAUNCH is approved according to AMS 1428.
Dispersogen™ SC Plus is a performance blend for SC crop protection formulations. It is suitable for multi-active applications and includes wetting, dispersing and anti-freeze properties.
Safewing™ MP II FLIGHT is a modern propylene-based Type II Deicing/Anti-Icing Fluid. It meets and exceeds all requirements of the latest revision AMS 1428.
Safewing MP I LFD 80 is a modern propylene glycol based SAE Type I aircraft Deicing Fluid, designed to meet all individual environmental demands. Safewing MP I LFD 80 is an AMS 1424/1 fluid.
Nipacide DFX 1 is an aqueous dispersion dry film fungicide based on Carbendazim, Diuron and Octyl isothiazolinone.
Nipacide DFX1 is recommended for protection of a wide range of coating applications including water based decorative paints, wood stains and colours. Nipacide DFX 1 is effective against a wide range of fungal and algal species, responsible for the discoloration and degradation of surface coatings.
Hostagliss EHS is a polyol ester and used as synthetic base fluid and lubricating component for rolling fluids, cutting & forming fluids and fire resistant hydraulic fluids.
Red Phosphorus HB 600 is a stabilized and microencapsulatedgrade of red phosphorus, delivered as a wet filter cake with 9-25% moisture (mean value for all drums of one delivery max. 20% moisture). It has a good oxidation and thermal stability. Red Phosphorus HB 600 is a brownish-red powder that is insoluble in water and organic solvents.
Clariant Oil Services’ PHASETREAT demulsifier technology has successfully separated the world’s oil from water for more than 50 years—from the lightest sweet crudes to the heaviest sour crudes, from Alaska to the Far East—and in compliance with some of the most stringent environmental regulations.
For more details see our Innovation Spotlight video.
Nipaguard SCP is part of the Nipaguard Zero toolbox and represent a trusted alternative to parabens, halogenated preservatives and formaldehyde-donors. Nipaguard SCP is very effective for leave-on & skin care formulations such as sun protection.
Exolit OP 1400 是一种基于有机次膦酸盐的非卤阻燃剂，可用于增强型聚酰胺 6、聚酰胺 66 和高温聚酰胺。该产品通过结合气相和凝相的作用方式实现阻燃效果。Exolit OP 1400 基于一种新的化学物质，该物质目前正在登记到多个国家和地区的化学品清单中。更多信息，请查看我们的创新焦点视频。
Perlogen SF 3000 is a cold processable, liquid pearlizing, sulfate-free concentrate. With its intensive silky shine at low usage concentrations, it enhances product quality and performance while remaining economical. Especially suitable for shampoos, liquid hand soaps, nourishing conditioners and moisturizing washes seeking premium visual appeal.
Clariant Oil Services’ LIBERATE near wellbore remediation technology is an integrated system of solutions that focuses on damage removal in the wellbore region that negatively affects the normal oil production curve.
Find more information on the Oil Innovation page.
Nipacide CDI is an aqueous dispersion, dry film fungicide based on Carbendazim.
Nipacide CDI is recommended for a wide range of coating applications including water-based paints and wood coatings. It is effective against a wide range of fungal species, responsible for the discoloration and degradation of surface coatings.
AddWorks ATR 945 mp is a low molecular weight hindered amine light stabilizer particularly designed for light stabilization of non-polar polymers (e.g. polyolefins). This specific solution offers an optimal stabilization to PP compounds.
Nipaguard SCE is a broad spectrum preservative blend designed for a wide range of cosmetics and toiletries. It is particularly strong against mold and remains full stable from pH 4.0 – 6.5, thus the ideal option for low pH. Being a synergestic blend of sorbitan caprylate, Nipaguard SCE is 85% renewable, DIN ISO 16128 compliant and readily biodegradable.
Plantasens Emulsifier CCT provides a simple system to create emulsions in a cold process from an easy-to-use concentrate based on patented NanoCon Technology. Based on its compatibility with most oils or oil soluble ingredients as well as with water and water soluble ones, it can be used as an emulsifier. An emulsion is formed spontaneously as soon as water is added - adjustable to creams, lotions, wet wipes and low viscous, sprayable emulsions.
The growing scarcity, and rising cost, of freshwater, has challenged the oil industry to find new, innovative, chemical solutions to control halite buildup. Clariant Oil Services developed the SCALETREAT HL product line to address this evolving industry challenge. Application of SCALETREAT HL reduces freshwater consumption between 74% and 95%. Our product also eliminates the need for a supplemental scale inhibitor as it is effective against halite and many types of carbonate and sulfate levels. Additionally, treatment rates of SCALETREAT HL are 50% less than those of traditional halite inhibitors.
The most common strategy to control halite is fresh water addition upstream of deposition to dilute the problem. While chemical inhibitors for halite control have existed for some years, they usually required high concentrations of environmentally undesirable products. New production in the US, such as in the Bakken and the deepwater Gulf of Mexico, has resulted in more production of saline fluids. The Bakken region has already had a profound impact. Application of SCALETREAT HL at 80ppm was able to reduce water consumption to 10% of that of the incumbent strategy with a return of investment of nearly 1,000%.
Perlogen SF 117 is a cold processable, sulfate-free, liquid pearlizer. With its accessible versatility and excellent performance-to-cost ratio, it enhances rinse-off products while maintaining efficiency. Especially suitable for shampoos, liquid hand soaps and moisturizing washes where both quality and value are essential.
Clariant Oil Services’ PRESERVAN line of hydrotest technologies delivers exemplary performance in a variety of easy-to-use, flexible options to meet all of your pipeline and process preservation needs.
Clariant Oil Services’ WAXTREAT paraffin control technologies were designed to prevent and treat paraffin build-up in order to improve flow and increase production.
Dispersogen 145 is an anionic, surfactant-based dispersing agent for water-based and solvent-based pigment preparations, suitable for organic and inorganic pigments.Dispersogen 145 is recommended for use in point-of-sales colorants in combination with a nonionic dispersing agent, e.g. Dispersogen MT 200.The general dosage recommendation is 2-3% on organic pigments and 2-3% on inorganic pigments.
Clariant Oil Services’SURFTREAT range of technologies comprises product functionalities such as cleaning, detergency, wettability modification and other general surfactant type applications.
DEET is the key worldwide known insect repellent active ingredient. It is used in products designed to protect consumers from biting insects and ticks, and the serious diseases they can carry (Malaria, yellow fever, dengue fever, West Nile virus)
Licowax S flakes is an acid wax used in a wide variety of applications, such as an external release agent (e.g. for thermosets and engineering plastics), emulsifier (e.g. for paraffin) and additives in care products (for its protection and gloss properties).
Minimize your environmental footprint with Licocare™ RBW Vita—a sustainable, bio-based wax derived from renewable rice bran oil, a byproduct of rice processing.It provides similar functionality while meeting sustainability targets. Contact us for more information or to request a sample.
Licowax SW flakes is a montanic acid wax.
Minimize your environmental footprint with Licocare™ RBW Vita—a sustainable, bio-based wax derived from renewable rice bran oil, a byproduct of rice processing.It provides similar functionality while meeting sustainability targets. Contact us for more information or to request a sample.
Red Phosphorus HB 400 is a stabilized and microencapsulated grade of red phosphorus, delivered as a wet filter cake with 15-25% moisture. It has a good oxidation and thermal stability. Red Phosphorus HB 400 is a brownish-red powder that is insoluble in water and organic solvents.
TONSIL ™ CO series catalysts have been establishing an outstanding status around the world. The Tonsil series has multiple products for each process to meet the different requirements in terms of activity and selectivity. Generally, Tonsil catalysts contain less side reaction active sites and have high surface area and superior pore properties. Those properties ensure the long cycle time of Tonsil catalysts, thus reduce the number of change outs and operation cost, increase the operation efficiency and reduce energy consumption. Clariant has years of experience in aromatics treatment and is committed to continuously improve these materials to adapt them to the increasing requirements of thepetrochemical industry.
TONSIL ™ APT series catalysts have their basis on the expertise which was gained with the TONSIL™ CO series. The Tonsil APT series has multiple products for each process to meet the different requirements in terms of activity and selectivity. Generally, Tonsil catalysts contain less side reaction active sites and have high surface area and superior pore properties. Those properties ensure the long cycle time of Tonsil catalysts, thus reduce the number of change outs and operation cost, increase the operation efficiency and reduce energy consumption. Clariant has gained now also with APT series years of experience in aromatics treatment.
TONSIL™ APT series has several advantages over the TONSIL™ CO series.
No sand grading is required - Loading procedure is less complex without sand grading
Higher bulk density
Longer cycle life
Less start-ups and shut-downs
Lower pressure drop
Lower energy consumption
Finally leads to lower CAPEX and OPEX over the whole year
Exolit OP 1230 是一种基于有机次膦酸盐的白色细粒粉末。该产品不吸潮，且不溶于水和有机溶剂。用于聚酰胺的科莱恩 Exolit OP 阻燃剂均基于二乙基次膦酸铝 (= DEPAL)。纯净的 DEPAL 物质作为 Exolit OP 1230 出售，与协效剂混合后作为 Exolit OP 13xx 出售。Exolit OP 1230 是首款非卤阻燃剂，可以满足高端工程塑料领域的苛刻要求。更多信息，请查看我们的创新焦点视频。
TONSIL ™ CO series catalysts have been establishing an outstanding status around the world. The Tonsil series has multiple products for each process to meet the different requirements in terms of activity and selectivity. Generally, Tonsil catalysts contain less side reaction active sites and have high surface area and superior pore properties. Those properties ensure the long cycle time of Tonsil catalysts, thus reduce the number of change outs and operation cost, increase the operation efficiency and reduce energy consumption. Clariant has years of experience in aromatics treatment and is committed to continuously improve these materials to adapt them to the increasing requirements of the petrochemical industry.
Exolit OP 1312 是一种基于有机次膦酸盐的非卤阻燃剂。本品通过发泡实现阻燃效果。含有 Exolit OP 1312 的热塑性聚合物遇火发泡并交联，从而在表面形成稳定的焦化层作为屏障。保护层具有隔热效果，可减少氧气进入并防止熔融聚合物滴落。Exolit OP 1312 是一种白色粉末。更多信息，请查看我们的创新焦点视频。
TONSIL ™ APT series catalysts have their basis on the expertise which was gained with the TONSIL™ CO series. The Tonsil APT series has multiple products for each process to meet the different requirements in terms of activity and selectivity. Generally, Tonsil catalysts contain less side reaction active sites and have high surface area and superior pore properties. Those properties ensure the long cycle time of Tonsil catalysts, thus reduce the number of change outs and operation cost, increase the operation efficiency and reduce energy consumption. Clariant has gained now also with APT series years of experience in aromatics treatment.
TONSIL™ APT series has several advantages over the TONSIL™ CO series.
No sand grading is required - Loading procedure is less complex without sand grading
Higher bulk density
Longer cycle life
Less start-ups and shut-downs
Lower pressure drop
Lower energy consumption
Finally leads to lower CAPEX and OPEX over the whole year
TONSIL ™ CO series catalysts have been establishing an outstanding status around the world. The Tonsil series has multiple products for each process to meet the different requirements in terms of activity and selectivity. Generally, Tonsil catalysts contain less side reaction active sites and have high surface area and superior pore properties. Those properties ensure the long cycle time of Tonsil catalysts, thus reduce the number of change outs and operation cost, increase the operation efficiency and reduce energy consumption. Clariant has years of experience in aromatics treatment and is committed to continuously improve these materials to adapt them to the increasing requirements of the petrochemical industry.
Clariant Oil Services’ HYTREAT hydrate management and control technologies are designed to provide hydrate control for the most severe conditions of sub-cooling.
Clariant Oil Services’ ICETREAT flow assurance technologies offer specially-formulated solutions that prevent blockages formed by water and hydrates in gas wells and gas flow lines.
Nipaguard DMDMH Plus is a preservative that is highly soluble in water. Nipaguard DMDMH Plus can be particularly effective in surfactant- based formulations, which can have some inherent antimicrobial activity, but which are susceptible to growth of some types of microorganisms.
Hostavin N 30 pills is an oligomeric hindered amine light stabilizer (HALS), designed for light stabilization of plastic materials. This HALS is characterized by its broad compatibility and excellent resistance to migration.
Synergen™ OS is a label-free polyglycerol ester blend suitable for both in-can and tank mix applications. The product reduces fines in the spray liquid to assist in drift mitigation. On the leaf surface, Synergen™ OS has excellent wetting and retention properties and acts as a foliar penetration enhancer.
Hostavin N 30 micro pills is an oligomeric hindered amine light stabilizer (HALS), designed for light stabilization of plastic materials. This HALS is characterized by its broad compatibility and excellent resistance to migration.
Synergen™ GA is a biological enhancer for salts of agrochemicals. The universal non-ionic wetting agent and solubilizer is based on glucamide chemistry. It is a sugar-based surfactant with a renewable carbon index (RCI) above 95% and excellent ecological profile. Synergen™ GA is a high electrolyte tolerant surfactant and can be used as a building block for customized formulations such as water conditioners, salts of agrochemicals and fertilizers.
Olive Active HP is an unsaponifiable olive oil derivative that prevents the formation of Advanced Glycation Endproducts (AGEs), to delay the apparition of aging signs. It is obtained from upcycled byproduct of olive oil production.
Plantasens Cosmetic Wax A5 is a natural structuring agent derived from non-GMO sunflower oil. It presents to formulators a fully natural and cost-effective solution to stabilize and/or increase formulation viscosity and is ideal for synthetic-, petroleum- and animal-free concepts.
Plantasens Cosmetic Wax A4 is a natural structuring agent derived from non-GMO soybean oil. It presents to formulators a fully natural and cost-effective solution to stabilize and/or increase formulation viscosity and is ideal for synthetic-, petroleum- and animal-free concepts
Eclipsogen EHT is a highly effective photostable UVB filter, particularly suitable for water-resistant products The main benefits are:
- Highly effective photostable UVB filter
- Effective at low use concentrations to achieve high SPF
- Particularly suitable for water-resistant products since it is substantive on skin
- High molecular weight, allowing it to provide better surface coverage on skin
Polyglykol B01/120 is a polyalkylene glycol (PAG) to be used as synthetic base fluid for high performance lubricants with low friction coefficients, excellent wear properties and good thermal stability.
Polyglykol B01/100 is a polyalkylene glycol (PAG) to be used as synthetic base fluid in high performance lubricants with low friction coefficients, excellent wear properties and good thermal stability.
Polyglykol B01/80 is a polyalkylene glycol (PAG) to be used as synthetic base fluid for high performance lubricants with low friction coefficients, excellent wear properties and good thermal stability.
Polyglykol B01/40 is a polyalkylene glycol (PAG) to be used as synthetic base fluid for high performance lubricants with low friction coefficients, excellent wear properties and good thermal stability.
Polyglykol B01/20 is a polyalkylene glycol (PAG) to be used as synthetic base fluid in high performance lubricants with low friction coefficients, excellent wear properties and good thermal stability.
Dispersogen LEC is an amphoteric, surfactant based dispersing agent and synergist for water-based and solvent-based pigment preparations based on inorganic pigments.Dispersogen LEC is recommended for use in point-of-sales colorants and concentrates for in-plant tinting in combination with a nonionic dispersing agent, e.g. Dispersogen MT 200. The general dosage recommendation is 4-6% on organic or inorganic pigments.
Genapol LRO paste is used as anionic emulsifiers for the emulsion polymerization of styrene-butadiene latices, acrylate, styrene-acrylate and vinyl acetate dispersions.
Polyethylene polypropylene glycol allyl ether with a molecular weight of 1800 g/mol. It works as a chemical intermediate in the production of silicone ethers
TONSIL ™ CO series catalysts have been establishing an outstanding status around the world. The Tonsil series has multiple products for each process to meet the different requirements in terms of activity and selectivity. Generally, Tonsil catalysts contain less side reaction active sites and have high surface area and superior pore properties. Those properties ensure the long cycle time of Tonsil catalysts, thus reduce the number of change outs and operation cost, increase the operation efficiency and reduce energy consumption. Clariant has years of experience in aromatics treatment and is committed to continuously improve these materials to adapt them to the increasing requirements of the petrochemical industry.
Emulsogen APS 100 is used as emulsifier and comonomer in emulsion polymerization, particularly in the manufacture of acrylate, styrene/acrylate and vinyl acetate emulsions.
Nipacide GRTp is an encapsulated biocide for dry-film preservation based on benzilisothiazolinone + iodopropylbutylcarbamate.
Nipacide GRTp is a powerful, low toxicity biocide developed for complete dry film and coating materials protection. It is effective against a wide range of fungal and yeast species and exhibits some activity against Gram negative and Gram positives bacteria.
TONSIL ™ CO series catalysts have been establishing an outstanding status around the world. The Tonsil series has multiple products for each process to meet the different requirements in terms of activity and selectivity. Generally, Tonsil catalysts contain less side reaction active sites and have high surface area and superior pore properties. Those properties ensure the long cycle time of Tonsil catalysts, thus reduce the number of change outs and operation cost, increase the operation efficiency and reduce energy consumption. Clariant has years of experience in aromatics treatment and is committed to continuously improve these materials to adapt them to the increasing requirements of thepetrochemical industry.
Nipacide DDI is an aqueous dispersion, dry film algaecide based on Diuron.
Nipacide DDI is recommended for a wide range of coating applications including water basedpaints and wood coatings. It is effective against a wide range of algal species, responsible for the discoloration and degradation of surface coatings.
TONSIL ™ CO series catalysts have been establishing an outstanding status around the world. The Tonsil series has multiple products for each process to meet the different requirements in terms of activity and selectivity. Generally, Tonsil catalysts contain less side reaction active sites and have high surface area and superior pore properties. Those properties ensure the long cycle time of Tonsil catalysts, thus reduce the number of change outs and operation cost, increase the operation efficiency and reduce energy consumption. Clariant has years of experience in aromatics treatment and is committed to continuously improve these materials to adapt them to the increasing requirements of the petrochemical industry.
Nipacide BKX is an in-can biocide based on bronopol + chloromethyl and methylisothiazolinone.
Nipacide BKX is a liquid, low toxicity biocide developed for the complete in-can protection of water-based products. Nipacide BKX is effective against a wide range of spoilage organisms and effective over a pH range of 4 to pH 8 and temperature below 40o C.
TONSIL ™ APT series catalysts have their basis on the expertise which was gained with the TONSIL™ CO series. The Tonsil APT series has multiple products for each process to meet the different requirements in terms of activity and selectivity. Generally, Tonsil catalysts contain less side reaction active sites and have high surface area and superior pore properties. Those properties ensure the long cycle time of Tonsil catalysts, thus reduce the number of change outs and operation cost, increase the operation efficiency and reduce energy consumption. Clariant has gained now also with APT series years of experience in aromatics treatment.
TONSIL™ APT series has several advantages over the TONSIL™ CO series.
No sand grading is required - Loading procedure is less complex without sand grading
Higher bulk density
Longer cycle life
Less start-ups and shut-downs
Lower pressure drop
Lower energy consumption
Finally leads to lower CAPEX and OPEX over the whole year
PREVOL 1040 is a cost-efficient, 100% active, vegetable oil-based foam control agent for coatings applications, PREVOL 1040 shows high performance, rapidly repressing foams. It may be added in any production process step and presents antifoam performance even after long periods of storage. It has good compatibility and does not interfere with the final product appearance.The recommended dosage of Antimussol V4 is 0.2 - 0.4% based on total formulation.
Hostacor™ 4323 is a water-dispersible corrosion inhibitor used for metalworking fluids (emulsions, semi-synthetic, synthetic), rolling emulsions and fire-resistant hydraulic fluids.
(Water or oil soluble salts depending on neutralization)
Genapol A 55 is an ethoxylated alcohol used as an emulsifying, low foaming surfactant in metal cleaning formulations. It offers improved emulsification and solvency over typical linear or branched alcohol ethoxylates.
Genapol X 080 is used as nonionic emulsifier for the emulsion polymerization of acrylates, styrene-acrylates, vinyl acetate, styrene-butadiene and E-PVC.
Hordaphos 774 is an efficient EP/AW additive with emulsification as well as corrosion inhibiting properties for ferrous metals and aluminium alloys. It is used for metal working fluids (emulsions, semi-synthetic, neat oil), rolling oils and emulsions and fire-resistant hydraulic fluids.
Polyglycol DME 500 can be used as an inert solvent and plasticizer in paints & coatings as well as reaction solvent or as PTC as a cost-effective alternative to crown ethers.
Hordaphos 1306 is an efficient EP/AW additive with emulsification as well as corrosion inhibiting properties. It is used for metal working fluids (emulsions, semi-synthetic) as well as for rolling emulsions and fire-resistant hydraulic fluids.
Dipropylene glycol dimethyl ether is an inert solvent and well suited as a non-toxic alternative to NMP and NEP in paints & coatings applications, especially for waterborne PU-dispersions and 2P-formulations.
Hostagliss L6 is a complex ester and used as lubricity improver for milky, semisynthetic and neat oil metalworking fluids. Furthermore it is used as synthetic base fluid for rolling emulsions.
Hostagliss L2 is a complex ester and used as lubricity improver for milky, semisynthetic and neat oil metalworking fluids. Furthermore it is used as synthetic base fluid for rolling emulsions.
Plantasens Emulsifier CP40 is an efficient natural emulsifier base. Suitable for w/o with high pigment content like natural suncare and also suitable for waterproof formulations. It shows excellent compatibility with inorganic UV-filters, wide range of polar and non polar oils (from 20 - 40%). Especially suitable for dry, mature and sensitive skin due to its rich sensory and nourishing skin feel.
TONSIL ™ CO series catalysts have been establishing an outstanding status around the world. The Tonsil series has multiple products for each process to meet the different requirements in terms of activity and selectivity. Generally, Tonsil catalysts contain less side reaction active sites and have high surface area and superior pore properties. Those properties ensure the long cycle time of Tonsil catalysts, thus reduce the number of change outs and operation cost, increase the operation efficiency and reduce energy consumption. Clariant has years of experience in aromatics treatment and is committed to continuously improve these materials to adapt them to the increasing requirements of the petrochemical industry.
Nipacide BNPD is an in-can biocide based on Bronopol.
Nipacide BNPD is recommended for preservation of a wide range of applications including Paints, varnishes, adhesives, emulsions (polymers), slurries, metal working fluids and home care products where the protection against bacteria and fungi is required in humid state (in can protection).
Nipacide BNPD is especially effective against bacteria including Pseudomonas sp. and sulphate reducing bacteria (SRB).
Plantasens Emulsifier CP5 is especially designed for formulating low viscous w/o emulsions with very low oil phase content and with no need of further stabilizing ingredients such as waxes. Plantasens Emulsifier CP5 is 100 % vegetable origin, GMO-free, based on a unique association of natural glycerides and olive unsaponifiables. These ingredients confer to a high emulsifying effect and an exceptional moisturizing capacity.
Download the La Crème formulation for nourishing full body care.
PREVOL NS 22 is a liquid foam control agent for waterborne latex paints, adhesives, architectural paints and coatings. PREVOL NS 22 can be used as such or pre-dispersed in water.Dosage: 0.2 -0.5% based on the total formulation.
TONSIL ™ Jet Supreme adsorbents have been establishing an outstanding status around the world. TONSIL™ Jet Supreme has long-standing experience in the purification of kerosene and jet fuel. Typically TONSIL™ Jet Supreme is based after a Merox or Merichem unit and designed to fulfill jet fuel specifications for MSEP and JFTOT for very long cycle lives. Jet Supreme products will finally purify the kerosene and jet fuel from impurities like water, salts, surfactants, solid particles. Jet Supreme P will further remove or stabilize color.
PREVOL DF is a cost efficient, 100% active and vegetable oil-based defoamer recommended for all types of waterborne architectural coatings.Typical applications are emulsion paints, paper coatings and water-based pigment preparations.PREVOL DF can be added at any stage of the manufacturing process. It has a rapid foam knockdown and persistent antifoam performance even after long term coating storage.Good compatibility and no impact on coating appearance.
PREVOL DF dosage recommendation is 0.2 -0.4% based on the total formulation.
TONSIL ™ Jet Supreme adsorbents have been establishing an outstanding status around the world. TONSIL™ Jet Supreme has long-standing experience in the purification of kerosene and jet fuel. Typically TONSIL™ Jet Supreme is based after a Merox or Merichem unit and designed to fulfill jet fuel specifications for MSEP and JFTOT for very long cycle lives. Jet Supreme products will finally purify the kerosene and jet fuel from impurities like water, salts, surfactants, solid particles. Jet Supreme P will further remove or stabilize color.
PREVOL P is a cost-efficient, 100% active oil-based defoamer recommended for all types of waterborne architectural coatings.PREVOL P is suitable for all coating types, can be added at any stage of the manufacturing process, and has a rapid foam knockdown andpersistent antifoam performance even after long term coating storage.Good compatibility and no impact on coating appearance.PREVOL P can be used as such or pre-dispersed in water. For the use as is, the dosage recommendation is 0.2 -0.4% based on the totalformulation.
Beraca™ Abyssinian Oil Refined is a unique oil derived from the Abyssinia plant – native to the sun-drenched windy open African Highlands and the South American Caatinga, some of the world regions that receive the highest UV exposures from the sun. A natural emollient with good heat stability and oxidation resistance with a great cushony after feel. Its unique composition, rich in omegas 6 and 9 and long-chain triglycerides leaves the skin nourished and hydrated.
AddWorks ATR 945 B is a low molecular weight hindered amine light stabilizer particularly designed for light stabilization of non-polar polymers (e.g. polyolefins). This specific solution offers an optimal stabilization to PP compounds.
PREVOL Z-70 is a liquid foam control agent with very low silicone content for adhesives, coatings and inks based on synthetic latex emulsions.PREVOL Z-70 is very effective during the mixing, dispersing and milling processes. Due to its components, it is easily dispersed and acts immediately to release entrapped air in foam bubbles and to prevent undesired foam built-up. It maintains its efficiency during long periods of agitation.The recommended dosage is 2.4-3.2 kg of PREVOL Z-70 for 1000 liters of paint. This amount is sufficient to control the foam efficiently.In adhesives we recommend dosages between 1-2 % of Antimussol Z-70 based on the total latex solids.This defoamer can be used as it is or as a water dispersion.
Hostacor™ AL is a phosphorous-free, water-dispersible corrosion inhibitor based on 100% renewable feedstocks which is recommended for steel-and aluminum cutting & grinding emulsions. The product has a low foaming tendency and contributes significantly to lubrication while simultaneously reducing cobalt leaching. Hostacor AL can also be added to existing metal working fluids for steel to upgrade them for machining aluminum.
TONSIL ™ APT series catalysts have their basis on the expertise which was gained with the TONSIL™ CO series. The Tonsil APT series has multiple products for each process to meet the different requirements in terms of activity and selectivity. Generally, Tonsil catalysts contain less side reaction active sites and have high surface area and superior pore properties. Those properties ensure the long cycle time of Tonsil catalysts, thus reduce the number of change outs and operation cost, increase the operation efficiency and reduce energy consumption. Clariant has gained now also with APT series years of experience in aromatics treatment.
TONSIL™ APT series has several advantages over the TONSIL™ CO series.
No sand grading is required - Loading procedure is less complex without sand grading
Higher bulk density
Longer cycle life
Less start-ups and shut-downs
Lower pressure drop
Lower energy consumption
Finally leads to lower CAPEX and OPEX over the whole year
Nipacide BIT 20 is an in-can biocide based on BIT.
Nipacide BIT 20 DPG is a glycol based solution; low toxicity biocide developed for the complete in-can protection of water based products. Nipacide BIT 20 DPG is effective against a wide range of microorganisms including gram positive and gram negative bacteria, yeast and fungi.
Nipacide BIT 20 DPG can be used over a wide pH and temperature range. Nipacide BIT20 DPG should be the biocide of choice for products with pH >8 and production temperatures of >40 C.
TONSIL ™ APT series catalysts have their basis on the expertise which was gained with the TONSIL™ CO series. The Tonsil APT series has multiple products for each process to meet the different requirements in terms of activity and selectivity. Generally, Tonsil catalysts contain less side reaction active sites and have high surface area and superior pore properties. Those properties ensure the long cycle time of Tonsil catalysts, thus reduce the number of change outs and operation cost, increase the operation efficiency and reduce energy consumption. Clariant has gained now also with APT series years of experience in aromatics treatment.
TONSIL™ APT series has several advantages over the TONSIL™ CO series.
No sand grading is required - Loading procedure is less complex without sand grading
Higher bulk density
Longer cycle life
Less start-ups and shut-downs
Lower pressure drop
Lower energy consumption
Finally leads to lower CAPEX and OPEX over the whole year
Nipacide CO 5 is an aqueous dispersion dry film fungicide based on Carbendazim, and Octyl isothiazolinone.
Nipacide CO 5 is recommended for protection of a wide range of coating applications including water based decorative paints, wood stains and colours. It is effective against a wide range of fungal species, responsible for the discoloration and degradation of surface coatings. Nipacide CO 5 can be used over a wide pH and temperature range.
TONSIL ™ APT series catalysts have their basis on the expertise which was gained with the TONSIL™ CO series. The Tonsil APT series has multiple products for each process to meet the different requirements in terms of activity and selectivity. Generally, Tonsil catalysts contain less side reaction active sites and have high surface area and superior pore properties. Those properties ensure the long cycle time of Tonsil catalysts, thus reduce the number of change outs and operation cost, increase the operation efficiency and reduce energy consumption. Clariant has gained now also with APT series years of experience in aromatics treatment.
TONSIL™ APT series has several advantages over the TONSIL™ CO series.
No sand grading is required - Loading procedure is less complex without sand grading
Higher bulk density
Longer cycle life
Less start-ups and shut-downs
Lower pressure drop
Lower energy consumption
Finally leads to lower CAPEX and OPEX over the whole year
Plantasens Emulsifier HP 10 absorbs very quickly due to its quick break effect, without leaving any residue. This emulsifier also promotes the formation of liquid crystal structures, helping formulators develop very stable creams with fresh and moisturizing properties.
Nipacide CDZ is a dry film fungicide based on Carbendazim, available in powder form.
Nipacide CDZ is recommended for a wide range of coating applications including water-based paints and wood coatings. It is effective against a wide range of fungal species, responsible for the discoloration and degradation of surface coatings.
TONSIL ™ CO series catalysts have been establishing an outstanding status around the world. The Tonsil series has multiple products for each process to meet the different requirements in terms of activity and selectivity. Generally, Tonsil catalysts contain less side reaction active sites and have high surface area and superior pore properties. Those properties ensure the long cycle time of Tonsil catalysts, thus reduce the number of change outs and operation cost, increase the operation efficiency and reduce energy consumption. Clariant has years of experience in aromatics treatment and is committed to continuously improve these materials to adapt them to the increasing requirements of the petrochemical industry.
Nipacide CFX 5 is an in-can biocide based on formaldehyde + chloromethyl and methylisothiazolinone.
Nipacide CFX 5 is a low toxicity biocide, developed for the complete protection of water based products. Nipacide CFX 5 is effective against bacteria, yeast and fungi. Nipacide CFX 5 is recommended for a wide range of applications including preservation of paints and varnishes, adhesives, emulsions (polymer), cutting fluids, where protection against bacteria and fungi is required in the wet state (In can protection).
Nipacide CFX 5 is stable in the temperature range of 5°C to 40 °C and in the range of pH 4 to 10.0.
TONSIL ™ CO series catalysts have been establishing an outstanding status around the world. The Tonsil series has multiple products for each process to meet the different requirements in terms of activity and selectivity. Generally, Tonsil catalysts contain less side reaction active sites and have high surface area and superior pore properties. Those properties ensure the long cycle time of Tonsil catalysts, thus reduce the number of change outs and operation cost, increase the operation efficiency and reduce energy consumption. Clariant has years of experience in aromatics treatment and is committed to continuously improve these materials to adapt them to the increasing requirements of the petrochemical industry.
Nipacide BNPD 20 is an in-can biocide based on Bronopol. Nipacide BNPD 20 is an aqueous solution recommended for preservation of a wide range of applications including Paints, varnishes, adhesives, emulsions (polymers), slurries, metal working fluids and home care products where the protection against bacteria and fungi is required in humid state (in can protection). Nipacide BNPD 20 is especially effective against bacteria including Pseudomonas sp. and sulphate reducing bacteria (SRB).
Red Phosphorus HB 801 (TP) is a stabilized and micro-encapsulated red phosphorus grade. Red Phosphorus HB 801 (TP) is a fine red powder that is insoluble in water and organic solvents.
Nipacide BK is an in-can biocide basen on Hexahydrotriazine (HHT).
Nipacide BKI is a water based, liquid biocide specifically developed for the complete in-can microbiological protection of industrial water-based products against bacterial and fungal spoilage in the wet state.
Nipacide BKI is effective against a wide range of microorganisms including gram positive and gram negative bacteria, yeast and fungi. It can be used over a pH range 6 - 10 and temperature range up to 60°C.
Hostaphat OPS 100 is a solubilizer or hydrotope for nonionic detergents in liquid cleaning agents at high ph values and a corrosion inhibitor for aluminium, iron and zinc in alkaline systems.
Hostaphat is used for various industrial lubricants applications. Hostaphat is a corrosion inhibitor and EP/AW additive for cutting & forming fluids and fire resistant hydraulic fluids. It is a water-based polymer quenchant for hardening fluids and a mild alkaline type metal cleaner.
Dispersogen LFS is an anionic, surfactant-based dispersing agent for water-based pigment preparations, suitable for inorganic and organic pigments as well as for specialty carbon blacks. The product is recommended for use in point-of-sales colorants and concentrates for in-plant tinting. Dispersogen LFS can be used as a stand-alone dispersing agent for organic pigments. For inorganic pigment, it is used in combination with a nonionic dispersing agent such as Dispersogen MT 200. The general dosage recommendation is 5-25% on organic pigments and 4-10% on inorganic pigments.Dispersogen LFS also acts as wetting agent/compatibilizer in waterborne high PVC paints as well as in waterborne and solvent-borne low PVC lacquers. The general dosage (supply form) is 1.0-1.5% in emulsion paints, 1.0-1.5% in acrylic lacquers and 0.5-1.0% in alkyd lacquers.
Hostaphat OPS 30 is a solubilizer or hydrotope for nonionic detergents in liquid cleaning agents at high pH values and a corrosion inhibitor for aluminium, iron and zinc in alkaline systems.
Dispersogen PCE is an anionic, polymeric dispersing agent for water-based pigment preparations, suitable for inorganic pigments.Dispersogen PCE is recommended for in-plant tinting systems. The general dosage recommendation is 5 - 25% on inorganic pigments.
Genamin STAC is a plant-based, cationic surfactant used in Hair Care products. Hair damaged by bleaching, permanent waving or excessive degreasing tends to mat. Genamin STAC, used in cream aftertreatment preperations, considerably improves the wet combing properties and the condition of the hair.
Genapol HS 200 is a nonionic emulsfier and thickener for personal care products. It is an ethoxylated fatty acid, based on stearic acid. This naturally derived, nonionic surfactant finds use in many Personal Care DEO applications.
Hostapon TPHC is a low odor high concentrate taurate. It produces moderate foam and is stable over a broad pH range. Its long carbon-chain can also help build viscosity in surfactant formulations.
Hostagel AV can be used as stabilizer or rheology modifier in a wide variety of applications such as surface cleaning, car polishing, hand care and insects repellents.
Genapol ID 060 is a wetting Agent in SC formulations and can also be used as a built-in Adjuvant or as a component of tank-mix Adjuvants to increase wetting of the plant surface.
The Genapol X products combine low-foam emulsification and wetting properties which make them the first choice for many NPE-free formulations as emulsifier, wetting Agent and Adjuvant.
Hostacerin DGSB is an emulsifier providing viscosity-increasing properties. Also applicable as co-emulsifier for cosmetic o/w emulsions and cream rinses.
Hostacor™ IT is a pre-neutralized, low foaming corrosion inhibitor mainly used in cutting & grinding fluids, in rolling emulsions and water-based hydraulic fluids (HFA-E, HFA-S).
Hostacor™ IT is an excellent corrosion inhibitor for steel and shows very good hard water stability. It can be used alone or in combination with other water-soluble corrosion inhibitors or lubricants.
Emulsogen™ EL 200 is a castor oil-based nonionic emulsifier with high emulsification power. The product shows excellent emulsification characteristics for many solvents and is not eye-irritating. It is widely used in different agrochemical formulation types and especially recommended for EC and EW.
Hostagel PH1 is a surfactant blend for acidic cleaners, e.g. bath & toilet cleaners. It thickens HCl acid formulations and other acidic cleaners based on e.g. phosphoric, sulfamic and sulfuric acid in the presence of chloride ions. Especially in combination with amine oxides, Hostagel PH1 thickened acidic formulations show a long-term storage stability and low shear dependence.
Emulsogen EL 300 is a standard NPE-free emulsifier in various EC formulations. The product shows excellent emulsification characteristics for many solvents and is not eye-irritating.
Hostaphat KL 340 D is a flexible emulsifier for challenging formulations that demand stability as well as a pleasant skin feel. This very efficient, pre-neutralized, anionic o/w emulsifier allows the design of emulsions with all types of oils and UV filters. Also very well suitable for low viscosity formats and textures like sprays, lotions and milks.
Hostacerin CS 200 is a non ionic emulsifier, easy to use, O/W emulsifier. Provides good estability to O/W emulsions. Hostacerin CS 200 is used in wet wipes, hair conditioners, creams and lotions
Hostacerin WO is a self emulsifying base for cosmetic water-in-oil emulsions. The emulsions obtained using this product have very good spreading properties on the skin, as well as cold and heat stability. Moreover, soft lustrous creams can be formulated, depending on the fatty components used.
D-FOAM-R M752 is a high performance, water based, foam control product for metalworking fluids and cleaners. D-FOAM-R M752 contains defoaming surfactants and organo-modified silicone
materials that are cold water rinseable and will not cause coating defects or adhesion problems.
It offers excellent compatibility and persistence in all types of metalworking fluids, in some cases
at concentrations as low as 50 ppm.
Plantasens Emulsifier DGI is a natural PEG-free emulsifier based on a patented technology. In combination with other emulsifiers or co-emulsifiers it allows a wide range of w/o textures due to its high emulsifying effect. Emulsions obtained with Plantasens Emulsifier DGI have very good spreading properties on the skin and provide a cushony after-feel.
The Genapol O types are alcohol ethoxylates based on a naturally derived fatty alcohol. Besides its use as an emulsifier, Genapol O 100 shows excellent adjuvant properties in EC and SC formulations.
Hostaphat KW 340 D is a versatile emulsifier suitable for demanding formulations thanks to its strong emulsifying and stabilizing properties. Emulsions with Hostaphat KW 340 D obtain great texture making the ingredient an ideal choice for caring non-greasy formulations
Hostapon CCG is a mild surfactant with good skin compatibility. It imparts a very pleasant feel on the skin, has excellent biodegradability and is free of preservatives.
Emulsogen™ EL 540 is a castor oil-based nonionic emulsifier with high emulsification power. The product shows excellent emulsification characteristics for many solvents and is not eye-irritating. It is widely used in different agrochemical formulation types and especially recommended for EC and EW.
Hostapon CGN is a very mild anionic surfactant giving an excellent skin feel in shower gels and facial & body washes. It is convenient to use and is cold-processable.
Emulsogen™ EP 4901 is a highly efficient emulsifier and dispersant for a variety of Crop formulations including EC, EW, SC, DC, FS, SE, OD and ME. It is suitable for use as an inert ingredient according to US NOP. Emulsogen™ EP 4901 is compatible with several microorganisms used in microbial Biological formulations..
Emulsogen EPN 217 is used as nonionic emulsifier for the emulsion polymerization of monomers like acrylates, styrene-acrylates, styrene-butadiene and vinyl acetate.
Emulsogen LCN 217 is used as nonionic emulsifier for the emulsion polymerization of monomers like acrylates, styrene-acrylates, styrene-butadiene and vinyl acetate. It improves the shear, temperature and electrolyte stability of polymer dispersions. The recommended usage is 2% active based on monomers.
Genamin BTLF is an exclusive form of Behentrimonium Chloride, free of any flammable solvents. Genamin BTLF provides a safe, efficient and easy to use blend of this very successful and widely used conditioning quat. Outstanding performance on hair, such as soft, natural feel and excellent dry combing properties is now combined with safe and convenient handling.
Hair damaged by bleaching, permanent waving or excessive degreasing feels and looks dull and lifeless. Genamin BTLF greatly improves the condition of the hair, making the hair look healthy and strong. Genamin BTLF offers a superb softening effect also for thick and hard to manage hair. The antistatic effect of Genamin BTLF is also noteworthy.
Dispersogen 4387 is an anionic, surfactant-based dispersing agent for water-based pigment preparations, suitable for inorganic and organic pigments as well as for specialty carbon blacks. Dispersogen 4387 is especially recommended for use in point-of-sales colorants and concentrates for in-plant tinting. The general dosage recommendation is 10-30 % on organic pigments and 5-10% on inorganic pigments.
Genosorb™ 1753, a specialty polyethylene glycol dialkylether, delivers exceptional performance in gas treatment applications through its unique properties. Its high absorption capacity and excellent thermal stability ensure efficient removal of acid gases, while its low vapor pressure minimizes solvent losses during operation. The product's low viscosity, even at reduced temperatures, enable smooth processing and optimal flow behavior. These features, combined low foaming behavior and compatibility with standard materials of construction, make Genosorb 1753 a reliable choice for gas sweetening and purification processes. The solvent’s outstanding chemical stability helps maintain consistent performance over time, contributing to more efficient and cost-effective gas treatment operations.
Hordaphos MDAH is a clear, colourless to yellowish liquid with an ester-like odour that may darken during storage. The product is soluble in organic solvents. When the ester is neutralized, it is emulsifiable in water. For more details see our Video about Hordaphos.
Nipaguard BPX is a broad spectrum antimicrobial agent comprising a synergistic blend of esters of parahydroxybenzoic acid (parabens) and Bronopol in Phenoxyethanol. It is ideal for all difficult to preserve formulations, such as wet wipes and sun screen formulations
Nipaguard POB is a broad spectrum liquid preservative comprising a powerful fungicide in an antibacterial liquid carrier designed for preservation of a wide range of cosmetics and toiletries. It is effective against bacteria, molds, and yeasts, and is normally recommended to be used from 0.3-1.0% based on the total weight of the finished product.
Dispersogen FSE is a nonionic, surfactant based dispersing agent for water-based and solvent based pigment preparations, suitable for inorganic pigments.Dispersogen FSE is recommended for use in point-of-sales colorants, in combination with an anionic dispersing agent such as Dispersogen 145, Dispersogen 4387, Dispersogen LFH or Dispersogen LFS. The general dosage recommendation is 5- 10 % on inorganic pigments.
Nipaguard PO 5 is a broad spectrum liquid preservative comprising a powerful fungicide in an antibacterial liquid carrier designed for preservation of a wide range of cosmetics and toiletries. It is effective against bacteria, molds and yeasts
Dispersogen™ PSL 100 is a non-ionic comb-shaped polyacrylate based polymeric dispersing agent which is highly effective at low concentrations. It can be used in highly stable SC formulations. It is provided in easy-to-handle liquid form.
Dispersogen PTS is a nonionic, surfactant based dispersing agent for water-based pigment preparations, suitable for organic pigments and carbon blacks.The product is recommended for use in point-of-sales colorants and concentrates for in-plant tinting. The general dosage recommendation is 5-40% on organic pigments.
Genapol ID 100 is a wetting Agent in SC formulations and can also be used as a built-in Adjuvant or as a component of tank mix Adjuvants that can rapidly wet the plant surface and can improve penetration.
Medialan KF-J is a plant-based mild surfactant. It functions as effective foaming and lathering agent. Its easy-to-use system also offers advantage on skin and hair care due to the mild benefits it brings into the formulation.
Emulsogen™ 3510 is an EO/PO block copolymer with high emulsification power. The product shows excellent emulsification characteristics for many solvents and is not eye-irritating. It is widely used in different agrochemical formulation types and especially recommended for EC and EW.
Emulsogen 4084 is used as nonionic emulsifier for the emulsion polymerization of monomers like pure acrylic, styrene-acrylic acid esters and vinyl acetate.
Emulsogen™ CIO 050 is a very low foaming ether carboxylic acid with excellent emulsification properties, used for metal working fluids, fire resistant hydraulic fluids (HFA-S) and rolling emulsions.
Emulsogen™ CIO 050 shows good corrosion protection if neutralized with alkanolamines. The product is extremely stable against electrolyte and hard water.
Nipacide BIT 10 W is an in-can biocide based on BIT.
Nipacide BIT 10 W is a light color, 10% active, VOC free, water-based solution of 1,2-benzisothiazolinone. Nipacide BIT 10 W is a low toxicity biocide developed for the complete in-can protection of water-based products.
Nipacide BIT 10 W is effective against a wide range of microorganisms including gram positive and gram negative bacteria, yeast and fungi. Nipacide BIT 10 W should be the biocide of choice for products with pH >8 and production temperatures of >40 C.
Emulsogen™ COL 050 is a low foaming ether carboxylic acid with good emulsification and dispersing properties, used for metal working fluids, fire resistant hydraulic fluids (HFA-S) and rolling emulsions.
Emulsogen™ COL 050 also offers good corrosion protection if neutralized with alkanolamines. The product is extremely stable against electrolyte and hard water. Furthermore Emulsogen™ COL 050 has good lime soap dispersing power, being able to disperse large quantities of calcium oleate or tallate.
Besides its use as an emulsifier, Genapol C 050 shows excellent adjuvant properties in EC and SC formulations by enhancing performance in foliar applications.
Nipacide BK is an in-can biocide basen on Hexahydrotriazine (HHT).Nipacide BK is an aqueous based low toxicity biocide developed for the complete in-can protection of water based products. Nipacide BK is effective against a wide range of microorganisms including gram positive and gram negative bacteria, yeast and fungi. Nipacide BK can be used over a wide pH and temperature range.
Emulsogen HCW 049 is a solubilizer for active, essential and perfume oils and an O/W emulsifier for special emulsions. This ingredient version is an easy-to-use and cold-processable solution for formulators.
Nipacide CI 15 MV is an in-can biocide based on CMIT/MIT.
Nipacide CI 15 MW is a water-based, low toxicity biocide developed for the complete in-can protection of water based products including water based /Latex/PVA adhesives, PVA / Acrylic polymer emulsions, water based decorative paints, printing inks, metal working fluids and construction admixtures.
Nipacide CI 15 MW is effective against a wide range of microorganisms including gram positive and gram negative bacteria, yeast and fungi. Thermal and pH stability for Nipacide CI 15 MW is a critical consideration and it should not be used for products with pH >8.5 or production temperatures of >40 °C.
Nipacide TBX is an in-can biocide based on benzisothiazolinone + triazine.
Nipacide TBX is a low toxicity biocide intended for industrial use only as a microbiostat preservative for aqueous compositions such as adhesives or tackifiers, polymer emulsions and lattices, natural and synthetic thickeners, aqueous slurries, construction compounds, metal working fluids and paints & coatings.
Nipacide TBX combines the outstanding stability of Nipacide BIT based biocides with the rapid kill of Nipacide BK.
Nipaguard DMDMH is a formaldehyde donor. It combines the benefits of broad spectrum antimicrobial activity with the ease of liquid handling. It has good performance against bacteria but is not recommended for oral care. It is non-irritating to eyes, skin and mucous membranes.
Hostacor™ DT is a boron free, water-dispersible corrosion inhibitor with emulsifying properties used for metalworking fluids, rolling fluids and fire-resistant hydraulic fluids. It is primarily used for the preparation of water-soluble coolants based on mineral oil. By varying the concentration of Hostacor™ DT, it is possible to adjust the corrosion inhibiting effect of the emulsion to special requirements.
Genamin C 020 is an amine ethoxylate based on coconut fatty amine. Lower ethoxylated amine ethoxylates can be used as compatibilizer for high-load glyphosate formulations.
Polyethylene glycol dialkyl ethers are well-established absorption fluids for scrubbing waste air and waste gas streams containing a variety of components, mostly solvents and acid gases. Being mixtures of homologues, polyethylene glycol dialkyl ethers have average molecular masses. The higher molecular weight polyethylene glycol dialkyl ethers are thermally and chemically stable substances with low viscosities and low vapor pressures. They are excellent absorbents for AGR processes, mercaptane absorption and VOC abatement. In practice a large number of acid gas and waste gas purification plants are operated with Genosorb™. Gas streams ranging from 0.5 to > 500 000 Nm3/h are treated continuously.
Genamin DSAP is used mainly in cream-type hair conditioners and hair replenishing treatments. It is also suitable for skin care preparations. The concentration required depends on the hair. The more damaged the hair is the more Genamin DSAP will be used to achieve best effect, starting at about 0.5% up to 2.0%, relative to the active substance
Genapol X 307 is used as nonionic emulsifier for the emulsion polymerization of monomers like acrylates, styrene-acrylates, styrene-butadiene and vinyl acetate.
Genapol HS 020 is a nonionic emulsfier and thickener for personal care products. It is an ethoxylated fatty acid, based on stearic acid. This naturally derived, nonionic surfactant finds use in many Personal Care DEO applications.
Polyethylene glycol dialkyl ethers are well-established absorption fluids for scrubbing waste air and waste gas streams containing a variety of components, mostly solvents and acid gases. Being mixtures of homologues, polyethylene glycol dialkyl ethers have average molecular masses. The higher molecular weight polyethylene glycol dialkyl ethers are thermally and chemically stable substances with low viscosities and low vapor pressures. They are excellent absorbents for AGR processes, mercaptane absorption and VOC abatement. In practice a large number of acid gas and waste gas purification plants are operated with Genosorb™. Gas streams ranging from 0.5 to > 500 000 Nm3/h are treated continuously.
Besides its use as an emulsifier, Genapol C 070 shows excellent Adjuvant properties in EC and SC formulations by enhancing performance in foliar applications.
Polyethylene glycol dialkyl ethers are well-established absorption fluids for scrubbing waste air and waste gas streams containing a variety of components, mostly solvents and acid gases. Being mixtures of homologues, polyethylene glycol dialkyl ethers have average molecular masses. The higher molecular weight polyethylene glycol dialkyl ethers are thermally and chemically stable substances with low viscosities and low vapor pressures. They are excellent absorbents for AGR processes, mercaptane absorption and VOC abatement. In practice a large number of acid gas and waste gas purification plants are operated with Genosorb™. Gas streams ranging from 0.5 to > 500 000 Nm3/h are treated continuously.
Genamin T 050 is a neutralising agent for corrosion protection oils, cutting & forming fluids and rolling fluids. Its appearance is clear, yellowish to brown liquid.
Genamin T 150 is the standard Adjuvant for Glyphosate IPA formulations. When using Genamin T 150, the addition of a solubilizer is necessary to obtain cold-temperature stability and dissolution behavior in the spray tank.
Dispersogen 3169 is an anionic, polymeric dispersing agent for water-based pigment preparations, suitable for organic pigments and carbon blacks.Dispersogen 3169 is especially recommended for use in concentrates for in-plant tinting. The general dosage recommendation is 12-50% on organic pigments.
Dispersogen AN 100 is a surfactant-based dispersing agent for water-based and solvent based pigment preparations, suitable for inorganic and organic pigments and carbon blacks. Dispersogen AN 100 is a 3 – in – 1 product with nonionic and anionic surface active components and a polyglycol as humectant. Dispersogen AN 100 is especially recommended for use in point-of-sales colorants and concentrates for in-plant tinting. The general dosage recommendation is 20- 50 % on inorganic pigments and 5-20% on organic pigments.
Dispersogen ECS is an anionic, surfactant-based dispersing agent for water-based and solvent-based pigment preparations, suitable for organic pigments and specialty carbon blacks. The product is especially recommended for use in in-plant tinters. The general dosage recommendation is 20 - 50 % on organic pigments. Dispersogen ECS also acts as wetting agent/compatibilizer in waterborne high PVC paints as well as in waterborne and solvent-borne low PVC lacquers. The general dosage (in supply form) is 1.7-3.3% in emulsion paints, 3.3-5.0% in acrylic lacquers and 0.85-1.7% in alkyd lacquers.
Dispersogen FA is a nonionic, surfactant based dispersing agent for water-based and solvent based pigment preparations, suitable for inorganic and organic pigments.
