Hostanox™ P-EPQ™ pills
Product Information
Plastics
- Low dosage
- High performance in color and melt flow retention during conversion process
- White application window allowing high processing temperatures
- Low softening temperature providing early stage protection in extrusion processes
- Significant contribution to dyne level retention
- High solubility in polymer virtually no haze or blooming
- High contribution to thermal stability of filled Polyolefin and engineering plastic compounds
- Higher contribution to Polypropylene clarity compared to other processing stabilizers
- Low plate out, low die buildup
- Preventing formation of char and specks
Coatings
- High contribution to termal yellowing reduction during processing and long term heat stability
- Inhibit discoloration due to Stoving/NOx
- Reduce Gas Fading
The product does not require a hazard warning label according CLP regulation (Regulation (EC) No. 1272/2008, as amended).
For further information please refer to the Material Safety Data Sheet.
Chemical nature: Phosphorous trichloride, reaction products with 1,1'-biphenyl and 2,4-bis(1,1-dimethylethyl)phenol
Classification: Process stabilizer for plastics
Delivery Specifications and (*) General Properties
| Characteristics | Unit | Target Value | Test Method |
| Appearance | white to off-white pills | visual | |
| Drop point | [°C] | 100 - 110 | QC-999-1353 |
| Acid value | [mg KOH/g] | max. 5.0 | QC-999-1353 |
| Phosphorus content | [%] | 5.4 - 5.9 | A.070.3017 |
| Loss on drying, 2 hours at 105°C | [%] | max. 0.5 | QC-999-1353 |
| 2,4-di-tert.-butyl-phenol | [%] | max. 2.5 | A.031.0001 |
| Transmission 425nm, 10% in EtOH/Chloroforme 2:1 | [%] | min. 86 | QC-070-0947 |
| Transmission 500nm, 10% in EtOH/Chloroforme 2:1 | [%] | min. 94 | QC-070-0947 |
Hostanox P-EPQ pills is recommended especially for the applications where polymers and/or binders are cured at elevated temperature and need thermo-stabilization, e.g. powder coatings, coil coatings and specific solventborne coatings (automotive for ex.).
Hostanox P-EPQ pills is suitable for most kinds of thermoplastic polymers. It is recommended especially for the stabilization of polyolefins (LLDPE, HDPE, PP), ABS, PS, polybutylene, PBT, PC, PA, thermoplastic polyester, nitrile barrier resins, etc.
Delivery form
Pills
The product is also available in other physical forms.
Packaging
Cardboard box 480 kg with 24 PE bags of 20 kg
Cardboard box 200 kg with 20 PE bags of 10 kg
Storage
The product should be stored dry and at room temperatures and processed immediately after opening the packaging.
Minimum shelf life is two years from date of shipping when properly stored in the original sealed packaging.
