Silver biocide for antimicrobial preservation
JMAC LP 10
改訂日 :
2026年2月06日
JMAC LP 10 is a preservative active with antimicrobial properties that reduces the spread of bacteria over the long term. JMAC is also suitable for various industrial applications like paints and coatings.
Product Information
ベネフィット
Paint and coatings manufacturers benefit from easy and economical formulation. The JMAC biocides are effective at very small ppm addition levels and offer low viscosity liquid dispersion.
For In-can preservation, the excellent thermal and pH stability of JMAC biocides means they can be used in a wide range of industrial applications, such as polymer emulsions, paints, sealants and adhesives.
- Versatile additive for paints & coatings applications
- Wide spectrum of activity – effective against bacteria, fungi and yeast
- Controlled release over a long period of time
- Effective at very low concentrations
- Use over an exceptionally wide pH range
- Excellent temperature stability
- Does not contain formaldehyde and isothiazolinones
Product details
製品機能
- Industrial biocide
Chemical Type
- Silver technology
用途
- Emulsion polymerization
- Pigment preparation
- Waterborne paints
- Decorative paints
- In-can preservation
- General preservation
Use biocides safely. Always read the label and product information before use.
| Active ingredients | AgCl on TiO2 |
| Silver chloride content | approx. 2% |
| Physical form | dispersion/white liquid |
| Ionicity | anionic |
| Freeze point | approx. 0 °C |
| Density | approx. 1.0 g/cm3 |
| Viscosity | approx. 3500 mPas |
| pH stability | 3-12 |
| Temperature stability | up to 300°C |
| Recommended use level | 0.25 - 1.0% |
In-Can preservative
Provides complete in-can protection of water based products at very low dose level.
Additive for hygenic paints
JMAC releases silver ions on demand, to inhibit bacterial growth on surfaces where high hygenic standards are required.
Additive to extend shelf life
Added value to your paint formulation to extend the shelf life of your product.
Co-Biocide
JMAC is the right choice as co-biocide when use of biocidal actives for a formulation is limited due to regulatory requirements or chemical stability reasons.
JMAC combinations
Clariant offers innovative, ready-to-use blends based on the JMAC technology providing exceptional protection.
Provides complete in-can protection of water based products at very low dose level.
Additive for hygenic paints
JMAC releases silver ions on demand, to inhibit bacterial growth on surfaces where high hygenic standards are required.
Additive to extend shelf life
Added value to your paint formulation to extend the shelf life of your product.
Co-Biocide
JMAC is the right choice as co-biocide when use of biocidal actives for a formulation is limited due to regulatory requirements or chemical stability reasons.
JMAC combinations
Clariant offers innovative, ready-to-use blends based on the JMAC technology providing exceptional protection.
Documentation
Log in or register to ClariHub for our full set of product documentation and more resources.
