Polyethylene wax
Ceridust™ 3620
エディションナンバー :
12
改訂日 :
2014年1月01日
Micronized polyethylene wax which is recommended for solvent based coatings and inks as well as for powder coating application. Ceridust 3620 is also a fine particle dispersing agent recommended for polyolefin, like LLDPE, LDPE, MDPE, HDPE.
Ceridust 3620 is an excellent rub and scratch resistance additive for all kind of printing inks. It can be used as an additive for powder coatings to increase the output during extrusion process, to improve the flowability of the powder, and to enhance slip properties and scratch resistance. As dispersing agent in polyolefins matrices, Ceridust 3620 enhances and stabilizes pigment dispersion, prevent re-agglomeration, and improves color strength.
Product Information
ベネフィット
- Excellent scratch resistance and matting properties
- High water repellent effect
- Excellent anti-settling properties
- Excellent dispersion properties to hard-to-disperse pigment masterbatches based on Polyethylene
Hazards
The product does not require a hazard warning label according CLP regulation (Regulation (EC) No. 1272/2008, as amended).
For further information please refer to the Material Safety Data Sheet.
The product does not require a hazard warning label according CLP regulation (Regulation (EC) No. 1272/2008, as amended).
For further information please refer to the Material Safety Data Sheet.
Delivery Specifications and (*) General Properties
| Characteristics | Unit | Target value | Test method |
| Appearance | white micronized powder | QM-AA-634 | |
| Drop point | [°C] | 127 - 132 | ASTM D 3954 |
| Particle size D50 | [µm] | 7.5 - 9.5 | QM-AA-112 |
| Density (23°C) | [g/cm³] | 0.96 - 0.98 | ISO 1183 |
| *Acid value | [mg KOH/g] | 0 | ISO 2114 |
Ceridust 3620 is recommended for solvent based coatings and inks as well as for powder coating application.
It is an excellent rub and scratch resistance additive for all kind of printing inks. The fine powder is easy to disperse especially in solvent or oil based inks.
In solvent based coatings the micronized polyethylene creates an excellent scratch resistance together with a very good matting and slip effect.
It is also an additive for powder coatings to increase the output during extrusion process and to improve the flowability of the powder. It also improves slip properties and enhances scratch resistance of the cured powder coating. The fine powder is also easy to blend with all the other ingredients at the beginning of the production procedure.
Ceridust 3620 is a fine particle dispersing agent and is recommended for polyolefin, like LLDPE, LDPE, MDPE, HDPE. The micronized dispersing agent particles are close to the pigment particles and being almost statistically ideally distributed, show a high likeliness to find a place between pigment particles, thus separating them from each other. Consequently those pigment particles will not form agglomerates. The early melting behavior of micronized particles leads to a coating effect of the pigment particles and neutralizes the binding forces of pigment particles, prevents them from re-agglomeration, eases pigment dispersion and stabilizes the dispersion. A mixture of standard powder and Ceridust already improves the color strength as well as the filter pressure value.
It is an excellent rub and scratch resistance additive for all kind of printing inks. The fine powder is easy to disperse especially in solvent or oil based inks.
In solvent based coatings the micronized polyethylene creates an excellent scratch resistance together with a very good matting and slip effect.
It is also an additive for powder coatings to increase the output during extrusion process and to improve the flowability of the powder. It also improves slip properties and enhances scratch resistance of the cured powder coating. The fine powder is also easy to blend with all the other ingredients at the beginning of the production procedure.
Ceridust 3620 is a fine particle dispersing agent and is recommended for polyolefin, like LLDPE, LDPE, MDPE, HDPE. The micronized dispersing agent particles are close to the pigment particles and being almost statistically ideally distributed, show a high likeliness to find a place between pigment particles, thus separating them from each other. Consequently those pigment particles will not form agglomerates. The early melting behavior of micronized particles leads to a coating effect of the pigment particles and neutralizes the binding forces of pigment particles, prevents them from re-agglomeration, eases pigment dispersion and stabilizes the dispersion. A mixture of standard powder and Ceridust already improves the color strength as well as the filter pressure value.
Delivery form
Micronized powder
Packaging
Big Bag 300 kg
Paper bag 20 kg
Pallet 600 kg (30 bags)
Storage
For best shelf life store this product in a dry area at normal ambient temperatures.
Minimum shelf life is two years from the date of shipping when properly stored.
Micronized powder
Packaging
Big Bag 300 kg
Paper bag 20 kg
Pallet 600 kg (30 bags)
Storage
For best shelf life store this product in a dry area at normal ambient temperatures.
Minimum shelf life is two years from the date of shipping when properly stored.
