AddWorks™ AGC 102 G

Chemical nature:        High Molecular Weight HALS

Classification:             not classified

Delivery Specifications and (*) General Properties

It is recommended for polyolefins (LLDPE, HDPE, PP, EVA, EBA) mainly agricultural films such as eg. greenhouse film.

Delivery form
Granules

Packaging
Cardboard box 20 kg PE bag
Pallet 480 kg (with 24 cardboard boxes)

Storage
For best shelf life store this product in a dry are a at normal ambient temperatures.
Minimum shelf life is five years from the date of shipping when properly stored.

1. What is the chemical nature and primary use of AddWorks AGC 102 G?
   AddWorks AGC 102 G is a polymer with aminoether-HALS and is used as an additive in the polymers industry, specifically in paints, lacquers, and varnishes.
2. Is AddWorks AGC 102 G classified as hazardous according to GHS?
   No, AddWorks AGC 102 G is not classified as a hazardous substance or mixture according to the Globally Harmonised System (GHS). However, dust from the product can form an explosive mixture in air.
3. What are the recommended first aid measures in case of inhalation of AddWorks AGC 102 G dust?
   Move the affected person to fresh air immediately. If unconscious, place them in the recovery position and seek medical advice. Do not give anything by mouth to an unconscious person. Get immediate medical attention.
4. What personal protective equipment (PPE) is recommended when handling AddWorks AGC 102 G?
   Recommended PPE includes respiratory protection with particulate filters unless adequate ventilation is provided, chemical-resistant gloves such as Butyl Rubber, PVC, or Neoprene, safety glasses with side shields or goggles, and protective clothing including long sleeves to prevent skin contact.
5. What precautions should be taken to prevent fire or explosion when handling AddWorks AGC 102 G?
   Keep the product away from heat and sources of ignition. Avoid dust formation and use non-sparking tools. Take measures to prevent electrostatic charge buildup, such as earthing during loading and off-loading. Electrical equipment should be protected to the appropriate standard. Cool endangered containers with water spray if necessary.
6. What are the physical properties of AddWorks AGC 102 G relevant to safety?
   AddWorks AGC 102 G appears as light yellow granules, almost odorless, with a melting range of 90 - 110 °C. It has a density of 0.98 g/cm³ at 23 °C and is insoluble in water (<1 mg/l). It does not catch fire and is not explosive. The particle size ranges from 1 to 3 mm.
7. What should be done in case of accidental release of AddWorks AGC 102 G?
   Avoid contact with skin, eyes, and clothing. Ensure adequate ventilation and evacuate personnel to safe areas. Remove all sources of ignition and avoid dust formation. Use non-sparking tools and sweep up the material into suitable containers for disposal. Clean contaminated surfaces thoroughly and dispose of recovered material according to local regulations.
8. What is the toxicity profile of AddWorks AGC 102 G?
   AddWorks AGC 102 G is not classified for acute toxicity. The oral LD50 in rats is greater than 2000 mg/kg. It is non-irritant to skin and eyes, and it is not classified as a skin or respiratory sensitizer. It is also not classified for germ cell mutagenicity, carcinogenicity, reproductive toxicity, or specific target organ toxicity.
9. How should AddWorks AGC 102 G be stored to ensure safety and stability?
   Store AddWorks AGC 102 G in tightly closed containers in a dry, cool, and well-ventilated place. Keep it away from sources of ignition and do not smoke near the product. Handle and open containers with care. The product is stable under recommended storage conditions.
10. Are there any environmental precautions related to AddWorks AGC 102 G?
    Yes, the product should not be allowed to enter drains, water courses, or soil. Release to the environment should be avoided. The product itself has not been tested for ecological effects, but it is recommended to handle it responsibly to prevent environmental contamination.