Dispersogen AN 200 is a surfactant-based dispersing agent for water-based and solvent-based pigment preparations, suitable for inorganic and organic pigments as well as for specialty carbon blacks. The product is especially recommended for use in point-of-sales colorants and concentrates for in-plant tinting. The general dosage recommendation is 10-50 % on organic pigments and 5-20% on inorganic pigments. Dispersogen AN 200 also acts as wetting agent/compatibilizer in waterborne high PVC paints as well as in waterborne and solvent-borne low PVC lacquers. The general dosage (supply form) is 0.6-1.9% in emulsion paints, 1.5-1.9% in acrylic lacquers and 1.3-1.9% in alkyd lacquers.
Dispersogen PTS is a nonionic, surfactant based dispersing agent for water-based pigment preparations, suitable for organic pigments and carbon blacks.The product is recommended for use in point-of-sales colorants and concentrates for in-plant tinting. The general dosage recommendation is 5-40% on organic pigments.
Emulsogen LCN 158 is used as a nonionic emulsifier for emulsion polymerization improving the shear, temperature and electrolyte stability of polymer dispersions. The recommended usage is 2% active based on monomers. In waterborne and solvent-borne lacquers (low PVC), Emulsogen LCN 158 can be used as a compatibilizer to improve tinting strength and to reduce rub-out, water absorption, and haze effects. Dosage recommendation (supply form) in waterborne acrylic lacquers is 1.3-1.9% and in solvent-borne alkyd lacquers 0.33-0.66%.When used during the premixing phase in the production of waterborne emulsion paints (high PVC), Emulsogen LCN 158 also acts as a processing aid and helps to reduce the grinding time by faster deagglomeration of TiO2 and fillers. This is especially of interest in areas of hard water. The general dosage recommendation (supply form) for this purpose is 0.3%.
Dispersogen AN 200 is a surfactant-based dispersing agent for water-based and solvent-based pigment preparations, suitable for inorganic and organic pigments as well as for specialty carbon blacks. The product is especially recommended for use in point-of-sales colorants and concentrates for in-plant tinting. The general dosage recommendation is 10-50 % on organic pigments and 5-20% on inorganic pigments. Dispersogen AN 200 also acts as wetting agent/compatibilizer in waterborne high PVC paints as well as in waterborne and solvent-borne low PVC lacquers. The general dosage (supply form) is 0.6-1.9% in emulsion paints, 1.5-1.9% in acrylic lacquers and 1.3-1.9% in alkyd lacquers.
Dispersogen LFS is an anionic, surfactant-based dispersing agent for water-based pigment preparations, suitable for inorganic and organic pigments as well as for specialty carbon blacks. The product is recommended for use in point-of-sales colorants and concentrates for in-plant tinting. Dispersogen LFS can be used as a stand-alone dispersing agent for organic pigments. For inorganic pigment, it is used in combination with a nonionic dispersing agent such as Dispersogen MT 200. The general dosage recommendation is 5-25% on organic pigments and 4-10% on inorganic pigments.Dispersogen LFS also acts as wetting agent/compatibilizer in waterborne high PVC paints as well as in waterborne and solvent-borne low PVC lacquers. The general dosage (supply form) is 1.0-1.5% in emulsion paints, 1.0-1.5% in acrylic lacquers and 0.5-1.0% in alkyd lacquers.
Dispersogen ECS is an anionic, surfactant-based dispersing agent for water-based and solvent-based pigment preparations, suitable for organic pigments and specialty carbon blacks. The product is especially recommended for use in in-plant tinters. The general dosage recommendation is 20 - 50 % on organic pigments. Dispersogen ECS also acts as wetting agent/compatibilizer in waterborne high PVC paints as well as in waterborne and solvent-borne low PVC lacquers. The general dosage (in supply form) is 1.7-3.3% in emulsion paints, 3.3-5.0% in acrylic lacquers and 0.85-1.7% in alkyd lacquers.
Genamin Gluco 50 is a sugar-based neutralizer specifically designed for architectural paints that helps maintain pH stability and overall paint performance over time. Derived from renewable glucose sources, its sustainability profile enables them to outperform in paint applications and beyond.
Polyglykol 200 LVC is a very low-VOC humectant for water-borne pigment preparations with little impact on wet scrub resistance. Polyglykol 200 LVC retards the drying of pigment pastes and forms a soluble film of the pigment preparation. Polyglykol 200 LVC prevents the clogging of the nozzles of tinting systems and metering machines.
Emulsogen LCN 158 is used as a nonionic emulsifier for emulsion polymerization improving the shear, temperature and electrolyte stability of polymer dispersions. The recommended usage is 2% active based on monomers. In waterborne and solvent-borne lacquers (low PVC), Emulsogen LCN 158 can be used as a compatibilizer to improve tinting strength and to reduce rub-out, water absorption, and haze effects. Dosage recommendation (supply form) in waterborne acrylic lacquers is 1.3-1.9% and in solvent-borne alkyd lacquers 0.33-0.66%.When used during the premixing phase in the production of waterborne emulsion paints (high PVC), Emulsogen LCN 158 also acts as a processing aid and helps to reduce the grinding time by faster deagglomeration of TiO2 and fillers. This is especially of interest in areas of hard water. The general dosage recommendation (supply form) for this purpose is 0.3%.
Emulsogen™ TS 100 is a nonionic tristyrylphenol ethoxylate which commonly used as NPE-free emulsifier and dispersing Agent for a wide range of different formulation types.
Emulsogen TS 200 is a nonionic wetting agent for use as a compatibilizer in waterborne high PVC paints, as well as in waterborne and solvent-borne low PVC lacquers. The general dosage (supply form) is 1.0-1.5% in emulsion paints and in acrylic lacquers, and 0.25% in alkyd lacquers. The additive can also be used as a dispersing agent in water-based pigment preparations, suitable for organic pigments and carbon blacks. Emulsogen TS 200 is recommended for POS-colorants as well as for concentrates for in-plant tinting. The general dosage recommendation is 5-30% on organic pigments and 20-40% on carbon black.Furthermore, Emulsogen TS 200 acts as a nonionic emulsifier for the emulsion polymerization of monomers like acrylates, styrene-acrylates, and vinyl acetate.
