Automotive & Transportation

From brake fluids to car coolants

solution_industries_automotive_transportation_1160x451_banner
  • Products

    • Aluprint Black 3R

      Aluprint Black 3R is a specially formulated printing ink which contains dyestuffs which are easily absorbed into anodized aluminum. Aluprints are used to produce multi-colored text and designs on unsealed anodized aluminum. more

    • Aluprint Blue 3R

      Aluprint Blue 3R is a specially formulated printing ink which contains dyestuffs which are easily absorbed into anodized aluminum. Aluprints are used to produce multi-colored text and designs on unsealed anodized aluminum. more

    • Aluprint Diluent Liq

      Aluprint Diluent Liquid is a combination of the same solvents used in both the Aluprint 3R and Aluprint W Printing Pastes. This makes it compatible with these inks and is therefore commonly used as a dilluant/thinner and as an agent for cleaning screens. more

    • Aluprint Green 3R

      Aluprint Green 3R is a specially formulated printing ink which contains dyestuffs which are easily absorbed into anodized aluminum. Aluprints are used to produce multi-colored text and designs on unsealed anodized aluminum. more

    • Aluprint Red 3R

      Aluprint Red 3R is a specially formulated printing ink which contains dyestuffs which are easily absorbed into anodized aluminum. Aluprints are used to produce multi-colored text and designs on unsealed anodized aluminum. more

    • Aluprint Reducer 3R

      Aluprint Reducer 3R is the unpigmented printing paste ie. the finished coloured paste minus the dyestuff. It can be mixed with the appropriate coloured paste to reduce its colour strength and thereby produce pale, pastel shades without altering any other process conditions. more

    • Aluprint Turquoise 3R

      Aluprint Turquoise 3R is a specially formulated printing ink which contains dyestuffs which are easily absorbed into anodized aluminum. Aluprints are used to produce multi-colored text and designs on unsealed anodized aluminum. more

    • Aluprint Yellow 3R

      Aluprint Yellow 3R is a specially formulated printing ink which contains dyestuffs which are easily absorbed into anodized aluminum. Aluprints are used to produce multi-colored text and designs on unsealed anodized aluminum. more

    • Sanodal® Black 2LW

      Sanodal® Black 2LW produces a Blue-Black color. At medium concentrations it is used for Blue-Grey and Midnight Blues shades. more

    • Sanodal® Black GL

      Sanodal® Black GL Paste is a light fast and weather fast dye that can be used to color aluminum to be used for both out-door and in-door applications. It is also suitable for producing dark green colors and for shading. more

    • Sanodal® Deep Black H3LW

      Sanodal® Deep Black H3LW paste is an extremely stable homogeneous dye recommended for exterior architectural applications as well as for coloring thin films and for situations such as coil coating where a short immersion time is required. more

    • Sanodal® Deep Black HBL Liq.

      Sanodal® Deep Black HBL Liq. is a convenient to use product that provides a fast striking neutral shade of black. This dye is suitable for the dyeing of coatings thinner than the norm, therefore its use can significantly improve the efficiency and reduce the cost of black anodizing aluminum. more

    • Sanodal® Deep Black MLW

      Sanodal® Deep Black MLW is the standard colorant for architectural quality apllications because of its excellent light and weather fastness. more

    • Sanodal® Deep Black MLW Gran.

      Sanodal® Deep Black MLW is the original standard, used throughout the anodizing industry, for a premium quality black dye. The granular form is practically dust-free making the product more user friendly. more

    • Sanodal® Gold 4N

      Sanodal® Gold 4N Powder is not a true organic dye but an iron compound that forms a colored complex with the aluminum oxide coating. It produces an attractive brassy-gold color that has exceptional permanence and has been used for architectual applications throughout the world. more

    • Sanodal® Green 3LW

      Sanodal® Green 3LW is distinguished by high fastness to light, weather and heat. It is recommended for applications where a light fast green finish is required. When processed according to the Sanodal procedure, this dye is suitable for exterior architectural components. more

    • Sanodal® Orange 3LW Liq.

      Sanodal® Orange 3LW Liquid is a homogeneous, water-soluble dye for adsorptive dyeing of anodized aluminum, which is distinguished by high fastness to light, weather and heat. more

    • Sanodal® Red B3LW

      Sanodal® Red B3LW Powder produces a shade of red that is of exceptional light fastness. In addition to exterior applications, this dye has been widely used for nameplates and appliance trim. more

    • Sanodal® Turquoise PLW Liq.

      Sanodal® Turquoise PLW Liquid is recommended for all applications ranging from exterior architectural panels and extrusions, stadium seating, and highway signs to such small objects as costume jewelry, nameplates and foil labels. more

    • Sanodure® Black CRO

      Sanodure® Black CRO is a homogeneous water soluble black dye with rapid adsorption dyeing of anodized aluminum. Sanodure® Black CRO is of primary interest for finishing processes in which rapid dye absorption is desired and the fastness properties are of secondary importance. Only recommended for interior use. more

    • Sanodure® Bordeaux RL

      Sanodure® Bordeaux RL is a homogeneous, water soluble dyestuff for the adsorptive dyeing of anodized aluminum. Only recommended for interior use more

    • Sanodure® Bronze 2LW

      Sanodure Bronze 2LW is a homogeneous, water soluble dyestuff for the adsorptive dyeing of anodised aluminium. Only recommended for interior use. more

    • Sanodure® Bronze G

      Sanodure® Bronze G is a homogeneous, water soluble dyestuff for the adsorptive dyeing of anodised aluminium. Only recommended for interior use. more

    • Sanodure® Brown GSL

      Sanodure® Brown GSL is a homogeneous, water soluble dyestuff for the adsorptive dyeing of anodized aluminum. Only recommended for interior use. more

    • Sanodure® Fast Bronze L

      Sanodure® Fast Bronze L is a homogeneous, water soluble dyestuff for the adsorptive dyeing of anodized aluminum. Only recommended for interior use. Sanodure® Fast Bronze L produces shades of pink, gold, bronze and orange with excellent light fastness, even on thin anodic coatings. Combinations with Sanodure® Fast Bronze L enable duplication of the entire range of gold colors from brassy to copper-like tones. more

    • Sanodure® Fast Gold L

      Sanodure® Fast Gold L is a homogeneous, water soluble dyestuff for the adsorptive dyeing of anodized aluminum. Only recommended for interior use. more

    • Sanodure® Fiery Red ML

      Sanodure® Fiery Red ML is a homogeneous, water soluble dyestuff for the adsorptive dyeing of anodized aluminum. Only recommended for interior use. more

    • Sanodure® Green LWN

      Sanodure® Green LWN produces deep shades suitable for all interior applications. more

    • Sanodure® Grey HLN liq

      Sanodure Grey HLN liq produces a neutral grey shade that can be used to produce a stainless steel look. This homogeneous dye is distinguished by its fastness to light and heat as well as its ability to hold shade. more

    • Sanodure® Grey NL liq.

      Sanodure Grey NL liq produces a neutral grey shade that is often used to produce a stainless steel look. It is compatible with Sanodure Fast Gold L or Sanodure Fast Bronze L to produce a wide range of bronze colors. more

    • Sanodure® Olive Brown 2R

      Sanodure® Olive Brown 2R is used for producing greenish-brown and neutral bronze. more

    • Sanodure® Orange G

      Sanodure® Orange G is a water soluble dyestuff for adsorptive dyeing of anodized aluminum. more

    • Sanodure® Orange RL

      Sanodure® Orange RL produces shades ranging from brass to deep orange depending upon concentration and coating thickness. It is also useful for jetting various black dyes. more

    • Sanodure® Violet CLW

      Sanodure Violet CLW is a quick-striking violet dye suitable for many novelty applications such as costume jewelry, identification tags, and decorative applications. more

    • Sanodure® Yellow Brown 2G

      Sanodure® Yellow Brown 2G yields an interesting range of Brown shades, the primary use of which is for appliance trim and costume jewelry. more

    • Sanodye® Black OA

      Sanodye® Black OA is unique for a black dye in that it is metal-free and may be used where disposal of metal containing effluent is objectionable. When properly applied it is suitable for almost any exterior application. more

    • Sanodye® Blue 2LW gran

      Sanodye® Blue 2LW gran produces pure blue shades making it versatile for many applications including, owing to its excellent light fastness, exterior. more

    • Sanodye® Blue G

      Sanodye® Blue G produces an intense blue sapphire-like shade having superb resistance to fading and weathering. This dye is well suited for both exterior and interior applications, and is effectively used for shading. more

    • Sanodye® Brown R

      Sanodye® Brown R is useful for the production of oxidized copper and reddish brown shades. more

    • Sanodye® Golden Orange RLW

      Sanodye® Golden Orange RLW produces shades ranging from brass to deep orange depending upon concentration and coating thickness. It may be shaded with Sanodye® Red GLW to produce a variety of gold colors. more

    • Sanodye® Green AEN

      Sanodye® Green AEN produces an attractive grass-green color. Although it is a mixture it has reasonable stability and long tank life. more

    • Sanodye® Orange 2B

      Sanodye® Orange 2B produces a bright yellow-orange color at full intensity. When mixed with blue dyes it forms bright green shades. Also, at low concentrations, it may be used to produce a shade very close to that of real brass. more

    • Sanodye® Red GLW

      Sanodye® Red GLW is extremely useful for shading gold and bronze hues in addition to its primary application as a red dye. more

    • Sanodye® Red RLW

      Sanodye® Red RLW is a water soluble dyestuff for adsorptive dyeing of anodized aluminum. more

    • Sanodye® Violet 3D

      Sanodye® Violet 3D Powder produces an intense red-violet shade, which has been adopted as the standard warning color for nuclear radiation hazards. more

    • Sanodye® Violet MRB New

      Sanodye® Violet MRB New Powder produces a unique blue-violet shade, Moon Rocks Blue, which emulates the color of the stones brought back by the Astronauts after the first Lunar landing. more

    • Sanodye® Yellow D

      Sanodye® Yellow D produces an excellent neutral Yellow color when used alone. Also, it is extremely useful in mixtures because of its compatibility with so many other dyes. more

    • Anodal® Color S-2

      Anodal® Color S-2 is a high performing, aqueous, sulphuric acid concentrate consisting of stabilizers and throwing power assistants in optimum composition, for improving the stability and throwing power of coloring electrolytes based on tin sulphate. more

    • Anodal® DA-5

      Anodal® DA-5 is a weakly alkaline, phosphate and silicate free degreasing agent and detergent for aluminum parts and their alloys. more

    • Anodal® Defoamer SFN

      Additive for the prevention of foam formation and suppressing of existing foam more

    • Anodal® EE

      Anodal® EE is a product for hardcoating anodizing. With the addition of Anodal EE the conventional sulfuric acid electrolyte can be used for hardcoating without the expense of costly refrigeration or a new high-voltage power supply. By utilizing Anodal EE additive in your electrolyte both, normal and hardcoat anodizing can be accomplished in the same tank. more

    • Anodal® MS-1

      Anodal® MS-1 is a nickel-based mid-temperature seal concentrate that will provide a smut free quality seal. The recommended temperature range is 75-85°C. more

    • Anodal® SH-1

      Anodal® SH-1 is used to obtain smudge-free hot water sealing of anodized aluminum and produces excellent sealing qualities. more

    • Anodal® SH-2

      Anodal® SH-2 is an additive for smudge-free mid-temperature sealing of anodically produced oxide coatings. more

    • Anodal® SUAC

      Anodal® SUAC is used on a large scale in anodic integral coloring processes. The function of Anodal® SUAC is to regulate the current potential characteristic and the redissolving power of the oxide layer. The colors produced by this anodic process are outstandingly resistant to light and weathering. Colors range from bright bronze to black, depending on the alloy. more

    • CERATOFIX®

      Bentonite at its best: TERRANA®, CLARIT® and CERATOSIL® clay specialties by Clariant Functional Minerals Clariant offers a wide range of specialty products based on bentonite clays. Ranging from pharmaceutical ingredients to rubber processing, a plethora of industries and applications benefit from the unique properties of this remarkable material. TERRANA® bentonite powders are applied in purification processes for both waste water treatment and drinking water preparation. CLARIT® grades are most effective products for clarifying wine, beer and fruit juices from proteins. CERATOSIL® materials help the ceramic industry to improve quality and production efficiency. CERATOFIX® bentonites are optimized for rubber applications. more

  • Products

    • Graphtol Bordeaux HF3R

      Graphtol Bordeaux HF3R is a brilliant bordeaux pigment with high colour strength, good lightfastness and excellent dielectric properties. Particularly suitable for films, cable sheathing and as a replacement for thioindigo pigments. more

    • Graphtol Carmine HF3C

      Graphtol Carmine HF3C is a highly transparent blue shade red with good fastness properties. Suitable for cable sheathing and spin-dyeing applications. more

    • Graphtol Carmine HF4C

      Graphtol Carmine HF4C is a bluish red pigment with good fastness properties. It is recommended for PVC, PE film and cable applications. more

    • Graphtol Fire Red 3RLP

      Graphol Fire Red 3RLP is an economical bluish red pigment with excellent dispersibility. It is suitable for the mass coloration of films and PP fibres, also recommended for cable applications, injection and blow moulding. more

    • Graphtol Orange GPS

      Graphtol Orange GPS is a pure and brilliant orange pigment. It is not recommended for processing temperatures above 200°C. more

    • Graphtol Orange RL

      Graphtol Orange RL is a pure and brilliant orange pigment with excellent dielectric properties. It is not recommended for processing temperatures above 200°C. more

    • Graphtol Red BB

      Graphtol Red BB is a very strong yellow shade red pigment with excellent dielectric properties. It is not recommended for processing temperatures above 200°C. more

    • Graphtol Red HF2B

      Graphtol Red HF2B is a standard pigment for PVC with excellent dielectric properties. In combination with PV Fast Yellow HR 02 or PV Fast Yellow HGR it is possible to match a wide range of orange and red color shades. more

    • Graphtol Red LC

      Graphtol Red LC is an economical yellow shade red pigment with high heat stability and good colour strength. It is not suitable for the coloration of consumer goods, food packaging and toys and not recommended in applications were good lightfastness is required. more

    • Graphtol Red P2B

      Graphtol Red P2B is a bluish red pigment exhibiting high color strength, good dispersibility and fastness properties. A highly economical pigment suitable for injection moulding, extrusion, film blowing and PP fibre applications. more

    • Graphtol Rubine L4B

      Graphtol Rubine L4B is an economical bluish red pigment with excellent dispersibility. It is recommended for cable, film and fibre application. more

    • Graphtol Yellow 3GP

      Graphtol Yellow 3GP is an economical greenish yellow pigment with reasonable fastness properties. It is suitable for PP fibers, packaging and toy applications and an ideal replacement for diarylide and lead chromate pigments. more

    • Graphtol Yellow GG

      Graphtol Yellow GG is a very strong, pure and cost effective green shade yellow pigment with excellent dielectric properties. It is not recommended for processing temperatures above 200°C. more

    • Graphtol Yellow GR

      Graphtol Yellow GR is a very strong and economical classical yellow pigment with excellent dielectric properties. It is not recommended for processing temperatures above 200°C. more

    • Graphtol Yellow H2R

      Graphtol Yellow H2R is a red shade yellow pigment with high color strength. It can be used as a replacement for diarylide and lead chromate pigments. Its potential reaction with alkaline additives can lead to discoloration and a reduction in properties. It is recommended for PP fiber applications. more

    • Graphtol Yellow H2R-LHC

      Low Halogen Controlled version of Graphtol Yellow H2R which is a red shade yellow pigment with high color strength. It can be used as a replacement for diarylide and lead chromate pigments. Its potential reaction with alkaline additives can lead to discoloration and a reduction in properties. It is recommended for PP fiber applications. more

    • Hostaprint Yellow H4G 32

      Hostaprint Yellow H4G 32 is a greenish yellow pigment preparation with excellent lightfastness and heat resistance. A reaction with alkaline additives may cause discoloration and reduction in properties. Suitable for exterior application. more

    • Hostasin Blue A2R 30

      Hostasin Blue A2R 30 is a finely dispersed, free-flowing pigment recommended for the coloration of natural rubber and most synthetic elastomers. more

    • Hostasin Green GG 30

      Hostasin Green GG 30 is a finely dispersed, free-flowing pigment recommended for the coloration of natural rubber and most synthetic elastomers. more

    • Hostasin Orange G 30

      Hostasin Orange G 30 is a finely dispersed, free-flowing pigment recommended for the coloration of natural rubber and most synthetic elastomers. more

    • Hostasin Red B 30

      Hostasin Red B 30 is a finely dispersed, free-flowing pigment recommended for the coloration of natural rubber and most synthetic elastomers. more

    • Hostasin Red HF2B 30

      Hostasin Red HF2B 30 is a finely dispersed, free-flowing pigment recommended for the coloration of natural rubber and most synthetic elastomers. more

    • Hostasin Yellow GR 30

      Hostasin Yellow GR 30 is a finely dispersed, free-flowing pigment recommended for the coloration of natural rubber and most synthetic elastomers. more

    • Hostasin Yellow HR 30

      Hostasin Yellow HR 30 is a finely dispersed, free-flowing pigment recommended for the coloration of natural rubber and most synthetic elastomers. more

    • PV Fast Blue A2R

      PV Fast Blue A2R is an organic blue pigment with excellent fastness, resistance and dispersion properties. It is a versatile pigment with applications in all polymers. more

    • PV Fast Blue A4R

      PV Fast Blue A4R is a reddish blue pigment with very good fastness properties. It is an universal pigment with applications in most polymers. more

    • PV Fast Blue A4R-LHC

      Low Halogen Controlled version of PV Fast Blue A4R. An universal pigment with applications in most polymers and suitable for fibre and film coloration. more

    • PV Fast Blue BG

      PV Fast Blue BG is a greenish blue pigment with excellent fastness and dispersion properties. A versatile pigment with applications in all polymers. more

    • PV Fast Blue BG-LHC

      Low Halogen Controlled version of PV Fast Blue BG. It is a pigment with excellent fastness and dispersion properties and applications in all polymers. more

    • PV Fast Green GNX

      PV Fast Green GNX is an organic green pigment with excellent fastness and dispersion properties. It is suitable for most plastics. more

    • PV Fast Orange H2GL

      PV Fast Orange H2GL is a strong and brilliant red shade orange with excellent fastness properties and high heat stability recommended in a wide range of applications and polymers. more

    • PV Fast Orange H4GL 01

      PV Fast Orange H4GL 01 is a strong and brilliant yellow shade orange pigment with excellent light fastness and high heat stability. more

    • PV Fast Pink E

      PV Fast Pink E is a bluish red pigment with excellent fastness properties and outstanding dispersibility. Suitable for high-end applications and for most plastics. Recommended for fibre, film and thin-wall applications. more

    • PV Fast Pink E 01

      PV Fast Pink E 01 is a bluish red pigment with excellent fastness properties and therefore suitable for high-end applications and for coloration of most plastics. more

    • PV Fast Pink E-LHC

      Low Halogen Controlled version of PV Fast Pink E. A pigment with excellent fastness properties and outstanding dispersibility. It is suitable for high-end applications and for most plastics additionally recommended for fibre, film and thin-wall applications. more

    • PV Fast Red B

      PV Fast Red B is a yellowish red pigment with high purity and excellent fastness properties. It is suitable as shading pigment and recommended for a wide range of applications and polymers. more

    • PV Fast Red B-LHC

      Low Halogen Controlled version of PV Fast Red B. Yellowish red pigment with high purity and excellent fastness properties. It is suitable as shading pigment and recommended for a wide range of applications and polymers. more

    • PV Fast Red BNP

      PV Fast Red BNP is a bluish red pigment with superior heat resistance and a wide range of applications including fibres, films and engineering polymers. It is suitable as a shading pigment. more

    • PV Fast Red D3G

      PV Fast Red D3G is a mid-shade red pigment with outstanding fastness properties in Polyolefins and PVC. more

    • PV Fast Red E3B

      PV Fast Red E3B is the bluish red shade version of Pigment Violet 19. It has an excellent heat resistance and outstanding fastness to light and weathering. more

    • PV Fast Red E4G

      PV Fast Red E4G is the yellowish red shade version of Pigment Violet 19. It has excellent heat resistance and outstanding fastness to light and weathering. more

    • PV Fast Red E5B

      PV Fast Red E5B is a bluish red shade version of Pigment Violet 19. It has an excellent heat resistance, light and weathering fastness. more

    • PV Fast Red HB

      PV Fast Red HB is a bright mid-shade red pigment with excellent heat resistance. It is suitable for tinting and full shade applications in a wide range of polymers. more

    • PV Fast Red HF4B

      PV Fast Red HF4B is a bluish red pigment with high light fastness. It is suitable for combinations with iron oxide red for artificial leather in the automotive sector. more

    • PV Fast Scarlet 4RF

      PV Fast Scarlet 4RF is an intense scarlet pigment with excellent fastness properties. It is suitable for fibres, films, injection moulding and extrusion applications in a wide range of polymers. more

    • PV Fast Violet BLP

      PV Fast Violet BLP is a very strong and brilliant violet pigment, with high fastness levels. It is not recommended as tinting component. But in combination with phthalocyanine pigments it is possible to economically match navy shades. more

    • PV Fast Violet RL

      PV Fast Violet RL is a very strong and brilliant violet pigment with very high fastness levels. It is not recommended as tinting component but in combination with phthalocyanine pigments it is possible to match navy shades economically. more

    • PV Fast Yellow H2GR

      It is a transparent mid-shade yellow pigment with excellent heat stability and high colour strength. Ideal replacement for diarylide, cadmium and lead chromate pigments. more

    • PV Fast Yellow H3R

      PV Fast Yellow H3R is a reddish yellow pigment with excellent light fastness and heat resistance. It can also be used as shading component. more

    • PV Fast Yellow H3R-LHC

      Low Halogen Controlled version of PV Fast Yellow H3R. Reddish yellow pigment with excellent light fastness and heat resistance.It can also be used as shading component. more

    • PV Fast Yellow H4G

      PV Fast Yellow H4G has an excellent light fastness, high weather fastness, high heat resistance and excellent dispersibility. Due to low influence on warpage it works very well for coloration of bottle crates, boxes and cases. more

    • PV Fast Yellow H9G

      PV Fast Yellow H9G is a very green shade, alkali resistant yellow pigment suitable for fibre, thin-wall and film applications. more

    • PV Fast Yellow HG

      PV Fast Yellow HG is a greenish yellow pigment with excellent fastness properties for applications in a wide range of polymers. It is a replacement for cadmium, lead chromate and diarylide pigments. more

    • PV Fast Yellow HG 01

      PV Fast Yellow HG 01 is a green shade yellow pigment with high color strength, high transparency and excellent fastness properties with applications in a wide range of polymers. more

    • PV Fast Yellow HR

      PV Fast Yellow HR is a very strong, pure and transparent reddish yellow pigment with excellent fastness and dielectric properties. It is not recommended for processing temperatures above 200 °C. more

    • PV Fast Yellow HR 02

      PV Fast Yellow HR 02 is a very strong, pure and transparent reddish yellow pigment with excellent fastness and dielectric properties. It is not recommended for processing temperatures above 200 °C. more

  • Products

    • Polysynthren Red GFP

      Polysynthren Red GFP is a yellowish red with excellent light fastness and heat resistance. Main use is for PET spin dyeing and the coloration of PET bottles. more

    • Solvaperm Green G

      Solvaperm Green G is a yellowish green with good light fastness and very good heat resistance. more

    • Solvaperm Green GSB

      Solvaperm Green GSB is a bluish green with good light fastness and very good heat stability. more

    • Solvaperm Orange 3G

      Solvaperm Orange 3G is a brilliant orange with very good light fastness and excellent heat resistance. more

    • Solvaperm Red 2G

      Solvaperm Red 2G is a yellowish red with very good light fastness and excellent heat resistance. more

    • Solvaperm Red 2G-LHC

      Solvaperm Red 2G-LHC is a Low Halogen Controlled version of Solvaperm Red 2G. It is a yellowish red with very good light fastness and excellent heat resistance. more

    • Solvaperm Red BB

      Solveperm Red BB is a brilliant, bluish red with high colour strength, very good light fastness and heat resistance. more

    • Solvaperm Red G

      Solvaperm Red G is a yellowish red with excellent light fastness and heat resistance. It is suitable for the coloration of PS, styrene co-polymers, PC, PETP, PBTP, PMMA and PVC-R. more

  • Products

    • Hostaperm Blue A2R for Paints and Coatings

      Hostaperm Blue A2R is a strong, red shade alpha-copper phthalocyanine pigment with the outstanding fastness properties of this group of pigments. more

    • Hostaperm Blue A4R

      Reddish blue pigment stable to aromatic solvents with the outstanding fastness properties of this group of pigments. In shade it is distinctly redder and slightly purer than Hostaperm Blue A2R. more

    • Hostaperm Blue BT-617-D

      Hostaperm Blue BT-617-D is a greenish blue pigment stabilized against flocculation with the outstanding fastness properties of this group of pigments. Hostaperm Blue BT-617-D is slightly redder in reduction and somewhat more opaque in full shade than Hostaperm Blue BFL. more

    • Hostaperm Blue BT-627-D

      Greenish blue pigment stabilized against flocculation with the outstanding fastness properties of this group of pigments. Hostaperm Blue BT-617-D is slightly redder in reduction and somewhat more opaque in full shade than Hostaperm Blue BFL. Can be used in solid colors and in metallic colors in a very wide range of concentrations. more

    • Hostaperm Blue BT-728-D

      Hostaperm Blue BT-728-D is a greenish tetrachloro-Cu-phthalocyanine pigment. When compared with the common Pigment Blue 15:1 grades Hostaperm Blue BT-728-D is distinguished by its distinctly greener shade and, in metallic shades, by a greener color flop, which is not achievable with any other phthalocyanine blue grades. more

    • Hostaperm Blue BT-729-D

      Hostaperm Blue BT-729-D is a greenish tetrachloro-Cu-phthalocyanine pigment. When compared with the common Pigment Blue 15:1 grades Hostaperm Blue BT-729-D is distinguished by its distinctly greener shade and, in metallic shades, by a greener color flop, which is not achievable with any other phthalocyanine blue grades. more

    • Hostaperm Brown HFR 01 for Paints and Coatings

      Hostaperm Brown HFR 01 is a dark brown, very transparent benzimidazolone pigment with excellent light-, weather- and solvent fastness properties as well as high heat stability. more

    • Hostaperm Green GNX

      Hostaperm Green GNX is a green pigment stable to aromatic solvents with the outstanding fastness properties of this group of pigments. Hostaperm Green GNX is slightly bluer than Hostaperm Green GG 01 more

    • Hostaperm Orange GR for Paints and Coatings

      Hostaperm Orange GR is a strong and very brillant perinone orange pigment with very good fastness, a very pure shade and high tinctorial strength. more

    • Hostaperm Pink E for Paints and Coatings

      Hostaperm Pink E is a blue shade quinacridone pigment with high tinctorial strength and the outstanding fastness properties of this group of pigments. more

    • Hostaperm Pink E transp. 01

      Hostaperm Pink E transp. 01 is a transparent, purer version of Pigment Red 122. It has higher tinctorial strength and is somewhat bluer than Hostaperm Pink E. In most paint binders it possesses very good flocculation stability, good rheological characteristics and good gloss. more

    • Hostaperm Pink EB transp.

      Hostaperm Pink EB transp. is a highly transparent, pure, bluish version of Pigment Red 122. It has markedly higher tinctorial strength and is markedly bluer than Hostaperm Pink E. It has very good flocculation stability, good flowability and good gloss in most paint binders. more

    • Hostaperm Red D2G 70

      Hostaperm Red D2G 70 is a brillant red pigment with excellent durability and good opacity. more

    • Hostaperm Red D3G 70

      Hostaperm Red D3G 70 is a brillant red pigment with very good durability, high color strength and very good opacity. more

    • Hostaperm Red E2B 70 for Paints and Coatings

      Hostaperm Red E2B 70 is a yellow shade, brillant and very opaque quinacridone pigment with the outstanding fastness properties of this group of pigments. Chemically and crystallographically identical to Hostaperm Red E3B. Differs from this in its higher covering power, better rheological properties, easier dispersibility, distinctly improved flocculation stability and, coloristically, by a yellower purer shade both in full tone and reductions, and about 10 % higher tinctorial strength. Because of the good flocculation stability a haze-free high gloss is obtained in paints even at high pigment concentrations. more

    • Hostaperm Red E3B for Paints and Coatings

      Hostaperm Red E3B is a very opaque, yellow shade quinacridone pigment with the best fastness properties of this group of pigments. It is substantially more opaque and slightly yellower than Hostaperm Red E5B 02, which is crystallographically and chemically identical. Because of its outstanding fastness properties, it can be used in a wide range of concentrations, i. e. both in full shades and as a shading component. It gives brilliant yellowish reds when used in combination with opaque organic and inorganic orange pigments. more

    • Hostaperm Red P2GL-WD

      Hostaperm Red P2GL-WD is a highly transparent, yellowish, pure red pigment with outstanding light and weathering fastness. more

    • Hostaperm Red Violet ER 02 for Paints and Coatings

      Hostaperm Red Violet ER 02 is a quinacridone pigment with the outstanding fastness properties of this group of pigments. more

    • Hostaperm Scarlet GO transp.

      Transparent version of Hostaperm Scarlet GO with very similar fastness properties. Distincly greater tinctorial strength in some paint systems. Particulary recommended for metallic paints. more

    • Hostaperm Violet BL 01

      Reddish, pure violet pigment with outstanding color strength. Violet BL 01 provides very good fastness properties and is recommended for all paint systems and in all fields of paint application more

    • Hostaperm Violet RL spec. for Paints and Coatings

      Hostaperm Violet RL spec. is a blue shade, very strong dioxazine pigment with the outstanding fastness properties of this group of pigments..Violet RL special is highly recommended as shading pigment to give a redder hue to phthalocyanine blue based solid- as well as effectshade paints. more

    • Hostaperm Violet RL-NF

      Surface-treated version of Hostaperm Violet RL special with excellent rheological properties and high flocculation stability in most solvent-based binders. Fastness properties and fields of application are the same as for Hostaperm Violet RL special. more

    • Hostaperm Yellow H3G for Paints and Coatings

      Pigment with a medium yellow shade and outstanding fastness to light and weathering. Because of its excellent fastness, it is suitable for use in all concentration ranges down to very pale pastel shades and as a shading pigment. more

    • Hostaperm Yellow H4G 70

      Modified version of Hostaperm Yellow H4G with considerably better opacity and distinctly improved flow properties with a lighter and cleaner full shade. Its improved rheological characteristics contribute to increase production eco- nomies by permitting for higher pigment loading in mill base without adversely affecting the gloss. more

    • Hostaperm Yellow H4G for Paints and Coatings

      Hostaperm Yellow H4G is a green shade, very opaque benzimidazolone pigment with excellent light, weather and solvent fastness properties as well as high heat stability. Recommended for paste inks as well as for solvent- and water based packaging gravure and flexographic printing inks more

    • Hostaperm Yellow H5G

      Greenish yellow pigment with high purity an excellent color strength. Noted for high heat stability and outstanding solvent fastness, recommended both for water borne and solvent borne OEM and refinish systems. With its outstanding weathering fastness and its semi-transparent full shade H5G is suitable for solid shades as well as for effect shades in the yellow, orange and green range. more

    • Hostaperm Yellow H6G for Paints and Coatings

      Hostaperm Yellow H6G is a green shade, opaque benzimidazolone pigment with excellent light, weather and solvent fastness properties as well as high heat stability. Recommended for paste inks as well as for solvent- and water based packaging gravure and flexographic printing inks. more

    • Novoperm Orange HL 70 for Paints and Coatings

      Novoperm Orange HL 70 is an opaque red shade benzimidazolone pigment. more

    • Novoperm Red F2RK 70 for Paints and Coatings

      Novoperm Red F2RK 70 is a pure, yellowish and highly opaque Naphthol AS pigment. more

    • Novoperm Red HF3S 70

      Novoperm Red HF3S 70 is a brilliant, yellowish red pigment with very good fastness to light and weathering in deep shades. It possesses very good rheological properties, high gloss and good opacity and is mainly used for lead-free, pure red shades in the automotive and industrial paints sector. more

    • Novoperm Yellow M2R 70

      Novoperm Yellow M2R 70 is a reddish yellow pigment with excellent fastness to light and weathering, especially in deep shades. Very good opacity for an organic pigment. As it has very good flow properties in paints, it can also be used at high pigment concentrations (about 25 % pigment relative to solid binder) without affecting the gloss. Eminently suitable for the production of intense opaque yellow shades for lead-free or low-lead paints. It should be borne in mind that the resistance to very strong alkalis is in some binder systems unsatisfactory. more

    • PV Fast Yellow H3R

      PV Fast Yellow H3R is a reddish yellow pigment with excellent light fastness and heat resistance. It can also be used as shading component. more

  • Products

    • Hostaperm Blue A2R for Paints and Coatings

      Hostaperm Blue A2R is a strong, red shade alpha-copper phthalocyanine pigment with the outstanding fastness properties of this group of pigments. more

    • Hostaperm Blue A4R

      Reddish blue pigment stable to aromatic solvents with the outstanding fastness properties of this group of pigments. In shade it is distinctly redder and slightly purer than Hostaperm Blue A2R. more

    • Hostaperm Blue BT-617-D

      Hostaperm Blue BT-617-D is a greenish blue pigment stabilized against flocculation with the outstanding fastness properties of this group of pigments. Hostaperm Blue BT-617-D is slightly redder in reduction and somewhat more opaque in full shade than Hostaperm Blue BFL. more

    • Hostaperm Blue BT-627-D

      Greenish blue pigment stabilized against flocculation with the outstanding fastness properties of this group of pigments. Hostaperm Blue BT-617-D is slightly redder in reduction and somewhat more opaque in full shade than Hostaperm Blue BFL. Can be used in solid colors and in metallic colors in a very wide range of concentrations. more

    • Hostaperm Blue BT-728-D

      Hostaperm Blue BT-728-D is a greenish tetrachloro-Cu-phthalocyanine pigment. When compared with the common Pigment Blue 15:1 grades Hostaperm Blue BT-728-D is distinguished by its distinctly greener shade and, in metallic shades, by a greener color flop, which is not achievable with any other phthalocyanine blue grades. more

    • Hostaperm Blue BT-729-D

      Hostaperm Blue BT-729-D is a greenish tetrachloro-Cu-phthalocyanine pigment. When compared with the common Pigment Blue 15:1 grades Hostaperm Blue BT-729-D is distinguished by its distinctly greener shade and, in metallic shades, by a greener color flop, which is not achievable with any other phthalocyanine blue grades. more

    • Hostaperm Brown HFR 01 for Paints and Coatings

      Hostaperm Brown HFR 01 is a dark brown, very transparent benzimidazolone pigment with excellent light-, weather- and solvent fastness properties as well as high heat stability. more

    • Hostaperm Green GNX

      Hostaperm Green GNX is a green pigment stable to aromatic solvents with the outstanding fastness properties of this group of pigments. Hostaperm Green GNX is slightly bluer than Hostaperm Green GG 01 more

    • Hostaperm Orange GR for Paints and Coatings

      Hostaperm Orange GR is a strong and very brillant perinone orange pigment with very good fastness, a very pure shade and high tinctorial strength. more

    • Hostaperm Pink E for Paints and Coatings

      Hostaperm Pink E is a blue shade quinacridone pigment with high tinctorial strength and the outstanding fastness properties of this group of pigments. more

    • Hostaperm Pink E transp. 01

      Hostaperm Pink E transp. 01 is a transparent, purer version of Pigment Red 122. It has higher tinctorial strength and is somewhat bluer than Hostaperm Pink E. In most paint binders it possesses very good flocculation stability, good rheological characteristics and good gloss. more

    • Hostaperm Pink EB transp.

      Hostaperm Pink EB transp. is a highly transparent, pure, bluish version of Pigment Red 122. It has markedly higher tinctorial strength and is markedly bluer than Hostaperm Pink E. It has very good flocculation stability, good flowability and good gloss in most paint binders. more

    • Hostaperm Red D2G 70

      Hostaperm Red D2G 70 is a brillant red pigment with excellent durability and good opacity. more

    • Hostaperm Red D3G 70

      Hostaperm Red D3G 70 is a brillant red pigment with very good durability, high color strength and very good opacity. more

    • Hostaperm Red E2B 70 for Paints and Coatings

      Hostaperm Red E2B 70 is a yellow shade, brillant and very opaque quinacridone pigment with the outstanding fastness properties of this group of pigments. Chemically and crystallographically identical to Hostaperm Red E3B. Differs from this in its higher covering power, better rheological properties, easier dispersibility, distinctly improved flocculation stability and, coloristically, by a yellower purer shade both in full tone and reductions, and about 10 % higher tinctorial strength. Because of the good flocculation stability a haze-free high gloss is obtained in paints even at high pigment concentrations. more

    • Hostaperm Red E3B for Paints and Coatings

      Hostaperm Red E3B is a very opaque, yellow shade quinacridone pigment with the best fastness properties of this group of pigments. It is substantially more opaque and slightly yellower than Hostaperm Red E5B 02, which is crystallographically and chemically identical. Because of its outstanding fastness properties, it can be used in a wide range of concentrations, i. e. both in full shades and as a shading component. It gives brilliant yellowish reds when used in combination with opaque organic and inorganic orange pigments. more

    • Hostaperm Red P2GL-WD

      Hostaperm Red P2GL-WD is a highly transparent, yellowish, pure red pigment with outstanding light and weathering fastness. more

    • Hostaperm Red Violet ER 02 for Paints and Coatings

      Hostaperm Red Violet ER 02 is a quinacridone pigment with the outstanding fastness properties of this group of pigments. more

    • Hostaperm Scarlet GO transp.

      Transparent version of Hostaperm Scarlet GO with very similar fastness properties. Distincly greater tinctorial strength in some paint systems. Particulary recommended for metallic paints. more

    • Hostaperm Violet BL 01

      Reddish, pure violet pigment with outstanding color strength. Violet BL 01 provides very good fastness properties and is recommended for all paint systems and in all fields of paint application more

    • Hostaperm Violet RL spec. for Paints and Coatings

      Hostaperm Violet RL spec. is a blue shade, very strong dioxazine pigment with the outstanding fastness properties of this group of pigments..Violet RL special is highly recommended as shading pigment to give a redder hue to phthalocyanine blue based solid- as well as effectshade paints. more

    • Hostaperm Violet RL-NF

      Surface-treated version of Hostaperm Violet RL special with excellent rheological properties and high flocculation stability in most solvent-based binders. Fastness properties and fields of application are the same as for Hostaperm Violet RL special. more

    • Hostaperm Yellow H3G for Paints and Coatings

      Pigment with a medium yellow shade and outstanding fastness to light and weathering. Because of its excellent fastness, it is suitable for use in all concentration ranges down to very pale pastel shades and as a shading pigment. more

    • Hostaperm Yellow H4G 70

      Modified version of Hostaperm Yellow H4G with considerably better opacity and distinctly improved flow properties with a lighter and cleaner full shade. Its improved rheological characteristics contribute to increase production eco- nomies by permitting for higher pigment loading in mill base without adversely affecting the gloss. more

    • Hostaperm Yellow H4G for Paints and Coatings

      Hostaperm Yellow H4G is a green shade, very opaque benzimidazolone pigment with excellent light, weather and solvent fastness properties as well as high heat stability. Recommended for paste inks as well as for solvent- and water based packaging gravure and flexographic printing inks more

    • Hostaperm Yellow H4G-EDS VP 3620

      Easily dispersible (called ED) version of Hostaperm Yellow H4G for solvent-borne coating systems. These pigments are surface modified with a highly efficient and widely compatible dispersing additive; hence they can also be dispersed with a dissolver, provided that their mill bases have been suitably formulated. The dispersion of ED pigments does not require additional dispersant as they already contain the optimal amount of additive for the modification of their surfaces. The coloristic properties of Hostaperm Yellow H4G-EDS VP 3620 can differ from those of the conventional pigment as a result of their improved ease-of-dispersion. more

    • Hostaperm Yellow H6G for Paints and Coatings

      Hostaperm Yellow H6G is a green shade, opaque benzimidazolone pigment with excellent light, weather and solvent fastness properties as well as high heat stability. Recommended for paste inks as well as for solvent- and water based packaging gravure and flexographic printing inks. more

    • Novoperm Orange H5G 70 for Paints and Coatings

      Novoperm Orange H5G 70 is a very opaque, pure, yellowish benzimidazolone pigment. more

    • Novoperm Orange HL 70 for Paints and Coatings

      Novoperm Orange HL 70 is an opaque red shade benzimidazolone pigment. more

    • Novoperm Orange HL 70-NF

      Novoperm Orange HL 70-NF is the surface-treated version of Novoperm Orange HL 70 with considerably improved rheological properties and dispersion stability, also in critical binder systems. Fields of application are the same as those of Novoperm Orange HL 70. Attention must be paid to the easier dispersibility of the pigment and hence its somewhat higher sensitivity to overmilling. Not recommended for water-borne paint systems. more

    • Novoperm Red F2RK 70 for Paints and Coatings

      Novoperm Red F2RK 70 is a pure, yellowish and highly opaque Naphthol AS pigment. more

    • Novoperm Red F3RK 70 for Paints and Coatings

      Novoperm Red F3RK 70 is a blue shade, brilliant and very opaque Naphthol AS pigment. more

    • Novoperm Red HF3S 70

      Novoperm Red HF3S 70 is a brilliant, yellowish red pigment with very good fastness to light and weathering in deep shades. It possesses very good rheological properties, high gloss and good opacity and is mainly used for lead-free, pure red shades in the automotive and industrial paints sector. more

    • Novoperm Red HF4B for Paints and Coatings

      Novoperm Red HF4B is a transparent blue shade Naphthol AS pigment. more

    • Novoperm Yellow 5GD 71 for Paints and Coatings

      Novoperm Yellow 5GD 71 is a very opaque and strong, green shade pigment. more

    • Novoperm Yellow H2G for Paints and Coatings

      Novoperm Yellow H2G is a mid shade benzimidazolone pigment. more

    • Novoperm Yellow HR 70 for Paints and Coatings

      Novoperm Yellow HR 70 is a strong, red shade, highly opaque diarylide yellow pigment. more

    • Novoperm Yellow M2R 70

      Novoperm Yellow M2R 70 is a reddish yellow pigment with excellent fastness to light and weathering, especially in deep shades. Very good opacity for an organic pigment. As it has very good flow properties in paints, it can also be used at high pigment concentrations (about 25 % pigment relative to solid binder) without affecting the gloss. Eminently suitable for the production of intense opaque yellow shades for lead-free or low-lead paints. It should be borne in mind that the resistance to very strong alkalis is in some binder systems unsatisfactory. more

    • PV Fast Yellow H3R

      PV Fast Yellow H3R is a reddish yellow pigment with excellent light fastness and heat resistance. It can also be used as shading component. more

  • Products

    • Graphtol Bordeaux HF3R

      Graphtol Bordeaux HF3R is a brilliant bordeaux pigment with high colour strength, good lightfastness and excellent dielectric properties. Particularly suitable for films, cable sheathing and as a replacement for thioindigo pigments. more

    • Graphtol Carmine HF3C

      Graphtol Carmine HF3C is a highly transparent blue shade red with good fastness properties. Suitable for cable sheathing and spin-dyeing applications. more

    • Graphtol Carmine HF4C

      Graphtol Carmine HF4C is a bluish red pigment with good fastness properties. It is recommended for PVC, PE film and cable applications. more

    • Graphtol Red F3RK 70

      Graphtol Red F3RK 70 is a very strong and brilliant mid-shade red pigment with good light fastness properties and good heat stability in polyolefins. more

    • Graphtol Red F5RK

      Graphtol Red F5RK is a very strong and brilliant bluish red pigment with very good lightfastness and high transparency. more

    • Graphtol Red HF2B

      Graphtol Red HF2B is a standard pigment for PVC with excellent dielectric properties. In combination with PV Fast Yellow HR 02 or PV Fast Yellow HGR it is possible to match a wide range of orange and red color shades. more

    • Graphtol Red HFG

      Graphtol Red HFG is a yellowish red pigment with good fastness properties. In combination with PV Fast Yellow HR 02 or PV Fast Yellow HGR it is possible to match brilliant orange color shades with good light fastness. more

    • Graphtol Yellow H2R

      Graphtol Yellow H2R is a red shade yellow pigment with high color strength. It can be used as a replacement for diarylide and lead chromate pigments. Its potential reaction with alkaline additives can lead to discoloration and a reduction in properties. It is recommended for PP fiber applications. more

    • Hostaprint Yellow H4G 32

      Hostaprint Yellow H4G 32 is a greenish yellow pigment preparation with excellent lightfastness and heat resistance. A reaction with alkaline additives may cause discoloration and reduction in properties. Suitable for exterior application. more

    • PV Fast Blue A2R

      PV Fast Blue A2R is an organic blue pigment with excellent fastness, resistance and dispersion properties. It is a versatile pigment with applications in all polymers. more

    • PV Fast Blue A4R

      PV Fast Blue A4R is a reddish blue pigment with very good fastness properties. It is an universal pigment with applications in most polymers. more

    • PV Fast Blue BG

      PV Fast Blue BG is a greenish blue pigment with excellent fastness and dispersion properties. A versatile pigment with applications in all polymers. more

    • PV Fast Brown HFR

      PV Fast Brown HFR is a red shade organic brown pigment with high fastness properties. It is distinguished by its excellent weather fastness. more

    • PV Fast Brown RL

      PV Fast Brown RL is a yellow shade organic brown pigment with excellent fastness properties. Suitable for exterior applications in PVC and polyolefins due to its excellent weather fastness. more

    • PV Fast Green GNX

      PV Fast Green GNX is an organic green pigment with excellent fastness and dispersion properties. It is suitable for most plastics. more

    • PV Fast Orange 6RL

      PV Fast Orange 6RL is a reddish orange pigment with high heat resistance and compatibility in a broad range of plastics. After preliminary testing, it is suitable for the coloration of polyamides and other engineering polymers. more

    • PV Fast Orange GRL

      PV Fast Orange GRL is a strong and brilliant orange pigment with very good heat resistance, light fastness and excellent fastness to weathering. more

    • PV Fast Orange H2GL

      PV Fast Orange H2GL is a strong and brilliant red shade orange with excellent fastness properties and high heat stability recommended in a wide range of applications and polymers. more

    • PV Fast Orange H4GL 01

      PV Fast Orange H4GL 01 is a strong and brilliant yellow shade orange pigment with excellent light fastness and high heat stability. more

    • PV Fast Pink E

      PV Fast Pink E is a bluish red pigment with excellent fastness properties and outstanding dispersibility. Suitable for high-end applications and for most plastics. Recommended for fibre, film and thin-wall applications. more

    • PV Fast Pink E 01

      PV Fast Pink E 01 is a bluish red pigment with excellent fastness properties and therefore suitable for high-end applications and for coloration of most plastics. more

    • PV Fast Red B

      PV Fast Red B is a yellowish red pigment with high purity and excellent fastness properties. It is suitable as shading pigment and recommended for a wide range of applications and polymers. more

    • PV Fast Red BNP

      PV Fast Red BNP is a bluish red pigment with superior heat resistance and a wide range of applications including fibres, films and engineering polymers. It is suitable as a shading pigment. more

    • PV Fast Red D3G

      PV Fast Red D3G is a mid-shade red pigment with outstanding fastness properties in Polyolefins and PVC. more

    • PV Fast Red E3B

      PV Fast Red E3B is the bluish red shade version of Pigment Violet 19. It has an excellent heat resistance and outstanding fastness to light and weathering. more

    • PV Fast Red E4G

      PV Fast Red E4G is the yellowish red shade version of Pigment Violet 19. It has excellent heat resistance and outstanding fastness to light and weathering. more

    • PV Fast Red E5B

      PV Fast Red E5B is a bluish red shade version of Pigment Violet 19. It has an excellent heat resistance, light and weathering fastness. more

    • PV Fast Red HF4B

      PV Fast Red HF4B is a bluish red pigment with high light fastness. It is suitable for combinations with iron oxide red for artificial leather in the automotive sector. more

    • PV Fast Scarlet 4RF

      PV Fast Scarlet 4RF is an intense scarlet pigment with excellent fastness properties. It is suitable for fibres, films, injection moulding and extrusion applications in a wide range of polymers. more

    • PV Fast Violet BLP

      PV Fast Violet BLP is a very strong and brilliant violet pigment, with high fastness levels. It is not recommended as tinting component. But in combination with phthalocyanine pigments it is possible to economically match navy shades. more

    • PV Fast Violet RL

      PV Fast Violet RL is a very strong and brilliant violet pigment with very high fastness levels. It is not recommended as tinting component but in combination with phthalocyanine pigments it is possible to match navy shades economically. more

    • PV Fast Yellow H2G

      PV Fast Yellow H2G is a greenish yellow pigment with excellent light fastness and resistance properties. It is recommend for a wide range of polymers and for outdoor applications. more

    • PV Fast Yellow H2GR

      It is a transparent mid-shade yellow pigment with excellent heat stability and high colour strength. Ideal replacement for diarylide, cadmium and lead chromate pigments. more

    • PV Fast Yellow H3R

      PV Fast Yellow H3R is a reddish yellow pigment with excellent light fastness and heat resistance. It can also be used as shading component. more

    • PV Fast Yellow H4G

      PV Fast Yellow H4G has an excellent light fastness, high weather fastness, high heat resistance and excellent dispersibility. Due to low influence on warpage it works very well for coloration of bottle crates, boxes and cases. more

    • PV Fast Yellow HG

      PV Fast Yellow HG is a greenish yellow pigment with excellent fastness properties for applications in a wide range of polymers. It is a replacement for cadmium, lead chromate and diarylide pigments. more

    • PV Fast Yellow HG 01

      PV Fast Yellow HG 01 is a green shade yellow pigment with high color strength, high transparency and excellent fastness properties with applications in a wide range of polymers. more

    • PV Fast Yellow HR

      PV Fast Yellow HR is a very strong, pure and transparent reddish yellow pigment with excellent fastness and dielectric properties. It is not recommended for processing temperatures above 200 °C. more

    • PV Fast Yellow HR 02

      PV Fast Yellow HR 02 is a very strong, pure and transparent reddish yellow pigment with excellent fastness and dielectric properties. It is not recommended for processing temperatures above 200 °C. more

  • Products

    • Hostavin® B-CAP®

      Hostavin B-CAP is a UV absorber with pronounced absorptivity in the high energy (low wavelength) range of the UV spectrum. more

    • Hostavin® N 30 P

      Hostavin N 30 P is an oligomeric hindered amine light stabilizer (HALS), designed for light stabilization of plastic materials. This HALS is characterized by its broad compatibility and excellent resistance to migration. more

    • Nylostab® S-EED®

      Nylostab S-EED is a unique multifunctional additive specially tailored for high compatibility with nylons by molecular recognition. more

  • Products

    • Safebrake 10 M

      Safebrake® 10 M (DOT 4) is based on glycols, glycol ethers, the corresponding borates, anti corrosion additives and anti-oxidants. A higher wet boiling point is a crutial safety feature. more

    • Safebrake 16 M

      Safebrake 16 M (DOT 4)was specially developed for vehicles with electronic ESP/DSC - driving stability systems. The fluid is characterized by an extreme low temperature viscosity, whereby a faster responding time of approx. 30% of the individual brake discs at low temperatures is guaranteed. As one of a few brake fluids world-wide, Safebrake 16 M exceeds the strong requirements of the standard ISO 4925, Class 6. more

    • Safebrake 3 M

      Safebrake® 3 M (DOT 3) is based on glycols, glycol ethers, anticorrosion additives and antioxidants. more

    • Safebrake 6 M

      Safebrake® 6 M (DOT 4) is based on glycols, glycol ethers, the corresponding borates, anti corrosion additives and anti-oxidants. The borate ester functions as a water sponge and increases the wet boiling point. A high wet boiling point is a crutial safety feature. more

    • Safebrake 9 M

      Safebrake® 9 M (DOT 4) is based on glycols, glycol ethers, the corresponding borates, anti corrosion additives and anti-oxidants. A higher wet boiling point is a crutial safety feature. more

  • Products

    • Sanolin Blue AE 90

      Sanolin Blue AE 90 is a water soluble anionic dye. Suitable for cosmetics, stationery, cleaning agents, polishes, fertilizers and crop protection. Sanolin Blue AE 90 meets the requirements for cosmetic ingredients in EU (CI 42090). more

    • Sanolin Orange RGL 90

      Sanolin Orange RGL 90 is a water soluble dye that is recommended for the coloration of personal care products, cosmetics, fabric and home care products as well as industrial and institutional cleaners. more

    • Sanolin Patent Blue V 85 01

      Sanolin Patent Blue V 85 01 is a water soluble powder dye that is recommended for the coloration of personal care products, cosmetics, fabric & home care products as well as industrial and institutional cleaners. more

    • Sanolin Ponceau 4RC 82

      Sanolin Ponceau 4RC 82 is a water soluble powder dye that is recommended for the coloration of personal care products, crop protection and fertilizers, cosmetics, fabric and home care products as well as industrial and institutional cleaners. more

    • Sanolin Quinoline Yellow 70

      Sanolin Quinoline Yellow 70 is a water soluble dye that is recommended for the coloration of personal care products, cosmetics, fabric and home care products as well as industrial and institutional cleaners. more

    • Sanolin Tartrazine X 90

      Sanolin Tartrazine X 90 is a water soluble anionic powder dye. Suitable for cosmetics, stationery, cleaning agents, polishes, fertilizers and crop protection. Sanolin Tartrazine X90 meets the requirements for cosmetic ingredients in EU (CI 19140). more

  • Products

    • Ink Jet Magenta E 02

      Ink Jet Magenta E 02 is a specially designed pigment for use in inkjet inks. Narrow particle size distribution and high purity offer very good stability in inkjet inks. more

    • Ink Jet Magenta E5B 02

      Ink Jet Magenta E5B 02 is a specially designed pigment for use in inkjet inks. Narrow particle size distribution and high purity offer very good stability in inkjet inks. more

    • Ink Jet Magenta E7B VP 3958

      Ink Jet Magenta E7B VP 3958 is a specially designed inkjet grade with high chroma. Recommended for use in UV-, solvent- and waterbased inks. more

    • Ink Jet Yellow 4G

      Ink Jet Yellow 4G is a specially designed pigment for use in inkjet inks. Narrow particle size distribution and high purity offer very good stability in inkjet inks. more

    • Ink Jet Yellow 4GC

      Ink Jet Yellow 4GC is specially designed inkjet grade pigment with very good overall fastness properties. Recommended for for use in UV-, solvent- and waterbased inks. more

    • Ink Jet Yellow 5GX-W

      Ink Jet Yellow 5GX-W is a specially designed inkjet grade for use in waterbased inks. more

    • Ink Jet Yellow H2G

      Ink Jet Yellow H2G is a specially designed high performance pigment for use in solvent an UV-based inkjet inks. more

    • Ink Jet Yellow H4G

      Ink Jet Yellow H4G is a specially designed high performance pigment for use in inkjet inks. It has very good stability in solvent and UV-inkjet inks and reduced particle size and narrow particle size distribution. more

  • Products

    • Exolit® AP 422

      Exolit AP 422 is a fine-particle ammonium polyphosphate (phase II) produced by a special method. The product is largely insoluble in water and completely insoluble in organic solvents. It is colourless, non-hygroscopic and non-flammable. more

    • Exolit® AP 423

      Exolit AP 423 is a fine-particle ammonium polyphosphate produced by a special method. The crystal modification is phase II. The product is largely insoluble in water and completely insoluble in organic solvents. It is a white powder, non-hygroscopic and non-flammable. more

    • Exolit® AP 462

      Exolit AP 462 is a product based on ammonium polyphosphate. The crystal modification is phase II. It is manufactured from ammonium polyphosphate by micro-encapsulation with melamine resin according to Clariant’s own method. Exolit AP 462 is a fine-particle white powder with very low solubility in water, even at elevated temperatures. It is completely insoluble in organic solvents. The product is non-hygroscopic and non-flammable. more

    • Exolit® AP 740

      Exolit AP 740 is a white free flowing powder. It is a non-halogenated additive flame retardant based on ammonium polyphosphate which develops its effectiveness through phosphorus/nitrogen synergism. Exolit AP 740 differs in its mode of action from chlorine or bromine containing flame retardants by achieving its effect through intumescence. The flame retarded material foams on exposure to flame. The carbon foam layer so formed protects the polymer through its heat-insulating effect and reduces further oxygen access. more

    • Exolit® AP 740 F

      Exolit AP 740 F is a white free flowing powder. It is a non-halogenated additive flame retardant based on ammonium polyphosphate which develops its effectiveness through phosphorus/nitrogen synergism. Exolit AP 740 F differs in its mode of action from chlorine or bromine containing flame retardants by achieving its effect through intumescence. The flame retarded material foams on exposure to flame. The carbon foam layer so formed protects the polymer through its heat-insulating effect and reduces further oxygen access. more

    • Exolit® AP 740 S

      Exolit AP 740 S is a white free flowing powder. It is a non-halogenated additive flame retardant based on ammonium polyphosphate which develops its effectiveness through phosphorus/nitrogen synergism. Exolit AP 740 S differs in its mode of action from chlorine or bromine containing flame retardants by achieving its effect through intumescence. The flame retarded material foams on exposure to flame. The carbon foam layer so formed protects the polymer through its heat-insulating effect and reduces further oxygen access. more

    • Exolit® AP 742

      Exolit AP 742 is a non-halogenated, additive flame retardant based on ammonium polyphosphate, which develops its effectiveness through a phosphorus/nitrogen synergism. Exolit AP 742 differs in its mode of action from other flame retardant technologies (e.g. chlorine- or bromine-containing flame retardants and minerals) by achieving its effect through intumescence. The flame retarded material foams on exposure to flame. The carbon foam layer so formed protects the polymer by its heat-insulating effect and reduces further oxygen access. more

    • Exolit® AP 750

      Exolit AP 750 is a non-halogenated flame retardant based on ammonium polyphosphate as main component, which develops its effectiveness through phosphorus/nitrogen synergism. In contrast to similar competitive material, it shows high processing stability. Exolit AP 750 differs in its mode of action from non phosphorus-based flame retardants (e. g. brominated, chlorinated or mineral FRs like ATH) by achieving its effect through intumescence. Material containing Exolit AP 750 will foam on exposure to flame. The carbon-rich foam layer so formed will protect the polymer and in many cases the substrate below through its heat-insulating effect, reduces further oxygen access and prevents dripping in case of a thermoplastic based formulation. Beyond the primary effects on fire behavior such as reduction of flame propagation rate, rate of heat release, dripping behavior, residual lengths of test specimens after flame tests etc., positive secondary fire effects such as low smoke density, no release of corrosive off-gases, lower formation of toxic smoke gases are of great interest. more

    • Exolit® AP 755

      You will find Exolit® AP 755 now as Exolit® IFR 36. Sie finden Exolit® AP 755 nun unter Exolit® IFR 36. http://www.clariant.com/de/Solutions/Products/2014/06/05/13/42/Exolit-IFR-36 more

    • Exolit® AP 766 (TP)

      Exolit AP 766 (TP) is a non-halogenated flame retardant based on phosphorus and nitrogen synergism. The product achieves its flame retardant effect through intumescence. The thermoplastic material foams and crosslinks on exposure to flame and forms a stable char at the surface acting as a barrier. The protective layer provides a heat-insulation effect, reduces oxygen access and prevents dripping of molten polymer. more

    • Exolit® OP 1230

      Exolit OP 1230 is a white, fine-grained powder based on an organic phosphinate. The product is non-hygroscopic and it is insoluble in water and organic solvents. Clariant’s Exolit OP flame retardants for polyamides are all based on aluminium diethyl-phosphinate (= DEPAL). The pure substance DEPAL is sold as Exolit OP 1230 and in combination with synergists as Exolit OP 13xx types. Exolit OP 1230 is the first non-halogenated flame retardant which can withstand the demanding requirements of this high end segment of engineering plastics. For more details see our Innovation Spotlight video . more

    • Exolit® OP 1240

      Exolit OP 1240 is a flame retardant based on an organic aluminium phosphinate which is a thermally stable white solid without any hazard classification or labeling. It can be easily compounded into polyesters and subsequently processed again to manufacture flame retarded parts used in consumer or industrial products. For more details see our Innovation Spotlight video . more

    • Exolit® OP 1260 (TP)

      Flame Retardant for Polyester Exolit OP 1260 (TP) is a non-halogenated flame retardant based on organic phosphinates. The product achieves its flame retardant effect through a combined gas phase and condensed phase mode of action. Exolit OP 1260 (TP) is based on commercially available chemical substances registered in inventories worldwide. For more details see our Innovation Spotlight video . more

    • Exolit® OP 1311

      Exolit OP 1311 is a non-halogenated flame retardant based on organic phosphinates. The product achieves its flame retardant effect through intumescence. The thermoplastic polymer with Exolit OP 1311 foams and crosslinks on exposure to flame and forms a stable char at the surface acting as a barrier. The protective layer provides a heat-insulating effect, reduces oxygen access and prevents dripping of molten polymer. Exolit OP 1311 is a white powder. For more details see our Innovation Spotlight video . more

    • Exolit® OP 1312

      Exolit OP 1312 is a non-halogenated flame retardant based on organic phosphinates. The product achieves its flame retardant effect through intumescence. The thermoplastic polymer with Exolit OP 1312 foams and crosslinks on exposure to flame and forms a stable char at the surface acting as a barrier. The protective layer provides a heat-insulating effect, reduces oxygen access and prevents dripping of molten polymer. Exolit OP 1312 is a white powder. For more details see our Innovation Spotlight video . more

    • Exolit® OP 1314

      Exolit OP 1314 is a non-halogenated flame retardant based on organic phosphinates. The product achieves its flame retardant effect through intumescence. The thermoplastic polymer with Exolit OP 1314 foams and crosslinks on exposure to flame and forms a stable char at the surface acting as a barrier. The protective layer provides a heat-insulating effect, reduces oxygen access and prevents dripping of molten polymer. Compared to Exolit OP 1312, the product gives an improved thermal stability of polyamide compounds. Exolit OP 1314 is a white powder. For more details see our Innovation Spotlight video . more

    • Exolit® OP 1400

      Exolit OP 1400 is a non-halogenated flame retardant based on organic phosphinates for reinforced polyamide 6, polyamide 66 and high temperature polyamides. The product achieves its flame retardant effect through a combined gas phase and condensed phase mode of action. Exolit OP 1400 is based on a new chemical substance which is currently being registered in various national and regional chemical inventories. For more details see our Innovation Spotlight video . more

    • Exolit® OP 550

      Clariant’s Exolit OP 550 flame retardant can be used for flexible polyurethane foams. It is a medium-viscosity liquid and it is based on a non-halogenated phosphorus polyol with a functionality of approx. 2. The product is a reactive flame retardant that can be chemically reacted into the polymeric matrix, preventing unwanted migration from the foam. Therefore, very low fogging values can be achieved which meet the most stringent emission standards for PU flexible foams in the automotive industry. For more details see our Video about Exolit® OP 550 and 560. more

    • Exolit® OP 560

      Exolit® OP 560 is a flame retardant that can be used for flexible polyurethane foams. It is a medium-viscosity liquid and it is based on a non-halogenated phosphorus polyol. The product is a reactive flame retardant which can be chemically reacted into the polymeric matrix. Therefore, very low fogging values can be achieved which meet the most stringent emission standards for PU flexible foams in the automotive industry. Watch how our Exolit® OP 560 can make the first trip to Mars safer. more

    • Exolit® RP 614 presscake

      Exolit RP 614 Presscake is a fine brown-red powder with a water content of 10-25%, based on a highly stabilized, microencapsulated grade of red phosphorus. This allows a safe and simple handling of the red phosphorus in a presscake form, and avoids the hazards associated when working with dry red phosphorus powders. Exolit RP 614 Presscake is noted for its high oxidation and thermal stability. It is insoluble in water and organic solvents. Due to the combination of stabilization and microencapsulation, the material is mostly inert against atmospheric influences. more

    • ECOSIL®

      Natural molding sand additives for superior quality in precision castings: ECOSIL® ECOSIL® lustrous carbon former adds the finishing touch, ensuring easy mold separation, improved surfaces and increased mold stability. Our unique eco-friendly technology, ECOSIL® LE, drastically reduce emissions and help foundries comply with highly demanding environmental regulations and standards. This is our two-tiered Bentonite solution to provide a one-of-a-kind efficient molding system. Discover LE Technology more

    • GEKO®

      Natural molding sand additives for superior quality in precision castings: GEKO® Unrivaled precision, smooth processability and easy shake-out for iron and steel castings: GEKO® is the effective booster for foundry productivity and perfect castings. Our unique eco-friendly technology, GEKO® LE, drastically reduce emissions and help foundries comply with highly demanding environmental regulations and standards. This is our two-tiered Bentonite solution to provide a one-of-a-kind efficient molding system. Discover LE Technology more

  • Products

    • Hydrocerol®

      Hydrocerol chemical foaming and nucleating agents from Clariant Masterbatches are commonly used in consumer goods and automotive components to reduce part weight without compromising stiffness or mechanical properties. In packaging, they save material and improve productivity, while preserving aesthetic appeal. Recently developed Clariant technology yields foam with smaller and more uniform cells so that processors can use 10 to 20% less plastic to create components that are visually identical to heavier, solid-walled parts. This makes Hydrocerol very attractive to companies committed to reducing the potential environmental impact of their products. For more details see the Innovation Spotlight page for Hydrocerol. more

    • RENOL

      Today’s demanding applications require the high-performance properties found in modern engineering polymers. To create the bright, durable and consistent colors that succeed in consumer marketplace, designers turn to RENOL masterbatches from Clariant. more

    • REMAFIN

      Under the REMAFIN brand name, Clariant markets color masterbatches (color concentrates) specially formulated for use in polyolefin polymers, including high-density, low-density and linear low-density polyethylene (PE), and polypropylene (PP). These materials are commonly used in injection molding, blow molding, film extrusion and other plastics processes. more

    • OMNICOLOR®

      OMNICOLOR® color concentrates are based on a multipurpose compatible carrier system. more

    • HiFormer

      HiFormer® – the brand new system for liquid masterbatches. Exploring new and innovative dimensions in design, flexibility and performance with brand owners and plastics processors. more

    • CESA Brand

      Specified in virtually every major market and industry, Clariant’s comprehensive line of CESA additive masterbatches offers unprecedented opportunities to improve the properties, performance and quality of finished products, while also optimizing productivity and costs. The CESA product line includes an exceptionally broad selection of standard additive masterbatches for use with all commercially available polymers. In addition, we can develop custom masterbatches as well as masterbatches combining active ingredients with selected pigments and dyestuffs, in order to meet virtually any special customer requirement. more

  • Products

    • Hydrocerol®

      Hydrocerol chemical foaming and nucleating agents from Clariant Masterbatches are commonly used in consumer goods and automotive components to reduce part weight without compromising stiffness or mechanical properties. In packaging, they save material and improve productivity, while preserving aesthetic appeal. Recently developed Clariant technology yields foam with smaller and more uniform cells so that processors can use 10 to 20% less plastic to create components that are visually identical to heavier, solid-walled parts. This makes Hydrocerol very attractive to companies committed to reducing the potential environmental impact of their products. For more details see the Innovation Spotlight page for Hydrocerol. more

    • RENOL

      Today’s demanding applications require the high-performance properties found in modern engineering polymers. To create the bright, durable and consistent colors that succeed in consumer marketplace, designers turn to RENOL masterbatches from Clariant. more

    • REMAFIN

      Under the REMAFIN brand name, Clariant markets color masterbatches (color concentrates) specially formulated for use in polyolefin polymers, including high-density, low-density and linear low-density polyethylene (PE), and polypropylene (PP). These materials are commonly used in injection molding, blow molding, film extrusion and other plastics processes. more

    • OMNICOLOR®

      OMNICOLOR® color concentrates are based on a multipurpose compatible carrier system. more

    • HiFormer

      HiFormer® – the brand new system for liquid masterbatches. Exploring new and innovative dimensions in design, flexibility and performance with brand owners and plastics processors. more

    • CESA Brand

      Specified in virtually every major market and industry, Clariant’s comprehensive line of CESA additive masterbatches offers unprecedented opportunities to improve the properties, performance and quality of finished products, while also optimizing productivity and costs. The CESA product line includes an exceptionally broad selection of standard additive masterbatches for use with all commercially available polymers. In addition, we can develop custom masterbatches as well as masterbatches combining active ingredients with selected pigments and dyestuffs, in order to meet virtually any special customer requirement. more

  • Products

    • Hostanox® O 3 pills

      Hostanox O 3 pills is a highly efficient phenolic antioxidant with high resistance against hydrolysis, providing long term heat stabilization to polyolefins and polyamide especially for applications where the final article comes in contact with extractive media such as water, fat etc. more

    • Hostavin® 3051-2 DISP

      Hostavin 3051-2 disp. is a 52% aqueous dispersion of a low molecular radical scavenger (HALS). It is characterized by its easy incorporation, broad compatibility and low volatility. more

    • Hostavin® 3052 LIQ

      Hostavin 3052 is a low-molecular weight radical scavenger of the type hindered amine light stabilizer (HALS) for solventless and solventborne paints, with a high migration resistance. more

    • Hostavin® 3053 LIQ

      Hostavin 3053 is the 80% solution of a low molecular weight hindered amine light stabilizer (HALS) in xylene. It is characterized by its excellent solubility, broad compatibility, extremely low volatility and migration stability. more

    • Hostavin® 3055 LIQ

      Hostavin 3055 is a low molecular weight hindered amine light stabilizer (HALS). It is characterized by its excellent solubility, broad compatibility, extremely low volatility and migration stability. more

    • Hostavin® 3058 LIQ

      Hostavin 3058 is a non-basic low molecular weight hindered amine light stabilizer (HALS), 100% liquid, characterized by its excellent solubility, broad compatibility in all kind of liquid paints, with low volatility and excellent stabilization efficiency. more

    • Hostavin® 3065 LIQ

      Hostavin 3065 is a 100% liquid low molecular weight radical scavenger (HALS). It is characterized by its good solubility, broad compatibility and good stabilization efficiency in all kind of coatings. more

    • Hostavin® 3070 DISP

      Hostavin 3070 disp. is a 52% aqueous dispersion of an oligomeric hindered amine light stabilizer (HALS), designed for UV stabilization of paints and clear coats. This HALS is characterized by its broad compatibility and excellent resistance to migration, low extraction and very low tox-profile. more

    • Hostavin® 3206 LIQ

      Hostavin 3206 is a highly effective, oxalanilide based, liquid UV-B absorber. It is characterised by its excellent compatibility in all solventborne coatings, with an improved resistance to migration and low volatility, under normal stoving conditions as well as low color in wet-paint. more

    • Hostavin® 3212 LIQ

      Hostavin 3212 is a 2:1 synergistic mixture of an oxalanilide based UV absorber with a low molecular weight HALS. more

    • Hostavin® 3310 P

      Hostavin 3310 is a benzotriazole UV absorber. Besides applications like coatings and paints, it is also used as an UV stabilizer in a wide range of plastics, characterized by its excellent compatibility and high efficiency. more

    • Hostavin® N 30 P

      Hostavin N 30 P is an oligomeric hindered amine light stabilizer (HALS), designed for light stabilization of plastic materials. This HALS is characterized by its broad compatibility and excellent resistance to migration. more

    • Hostavin® PR-31 P

      Hostavin PR-31 is a hindered amine light stabilizer (HALS) with a UV absorber functionality. This HALS is characterized by its excellent efficiency and its ability to be fixed into the binder or the polymer matrix during UV exposure. more

  •  

    Products

    • AddWorks® ATR 945 mp

      AddWorks ATR 945 mp is a low molecular weight hindered amine light stabilizer particularly designed for light stabilization of non-polar polymers (e.g. polyolefins). This specific solution offers an optimal stabilization to PP compounds. more

    • Hostanox® O 3 pills

      Hostanox O 3 pills is a highly efficient phenolic antioxidant with high resistance against hydrolysis, providing long term heat stabilization to polyolefins and polyamide especially for applications where the final article comes in contact with extractive media such as water, fat etc. more

    • Hostanox® O 310 micro pills

      Hostanox O 310 micro pills effectively combines extraordinary high extraction resistance and hydrolytic stability with good stabilization performance. Therefore Hostanox O 310 micro pills is predestined for the stabilization of polymer articles requiring high level of stability even after an exposition to extractive media (e.g. water, solvents, etc). more

    • Hostastat® HS 1 FF

      Hostastat HS 1 FF is an alkane sulfonate which provides highly effective antistatic properties to thermoplastic polymers. more

    • Hostavin® B-CAP®

      Hostavin B-CAP is a UV absorber with pronounced absorptivity in the high energy (low wavelength) range of the UV spectrum. more

    • Hostavin® N 30 P

      Hostavin N 30 P is an oligomeric hindered amine light stabilizer (HALS), designed for light stabilization of plastic materials. This HALS is characterized by its broad compatibility and excellent resistance to migration. more

    • Hostavin® PR-25 granules

      Hostavin PR-25 granules is an efficient UV-B absorber for coatings and plastic materials. more

    • Hostavin® PR-31 P

      Hostavin PR-31 is a hindered amine light stabilizer (HALS) with a UV absorber functionality. This HALS is characterized by its excellent efficiency and its ability to be fixed into the binder or the polymer matrix during UV exposure. more

    • Nylostab® S-EED®

      Nylostab S-EED is a unique multifunctional additive specially tailored for high compatibility with nylons by molecular recognition. more

  • Products

    • AddWorks® ATR 945 mp

      AddWorks ATR 945 mp is a low molecular weight hindered amine light stabilizer particularly designed for light stabilization of non-polar polymers (e.g. polyolefins). This specific solution offers an optimal stabilization to PP compounds. more

    • Hostanox® O 3 pills

      Hostanox O 3 pills is a highly efficient phenolic antioxidant with high resistance against hydrolysis, providing long term heat stabilization to polyolefins and polyamide especially for applications where the final article comes in contact with extractive media such as water, fat etc. more

    • Hostanox® O 310 micro pills

      Hostanox O 310 micro pills effectively combines extraordinary high extraction resistance and hydrolytic stability with good stabilization performance. Therefore Hostanox O 310 micro pills is predestined for the stabilization of polymer articles requiring high level of stability even after an exposition to extractive media (e.g. water, solvents, etc). more

    • Hostanox® OSP 1

      Hostanox OSP 1 is a high efficient antioxidant and metal deactivator which prevents the auto-catalytic decomposition of polyolefins. The usage of metal deactivators is mandatory as long as the polyolefin based finished article comes into contact with transition metals, such as Cu, Fe, Ni, Ti, etc. more

    • Hostastat® FA 38

      Hostastat FA 38 is an ethoxylated alkyl amine which provides highly effective internal antistatic properties to thermoplastic polymers. more

    • Hostavin® N 30 P

      Hostavin N 30 P is an oligomeric hindered amine light stabilizer (HALS), designed for light stabilization of plastic materials. This HALS is characterized by its broad compatibility and excellent resistance to migration. more

    • Hostavin® VSU P

      Hostavin VSU is an Oxalanilide UV absorber, a low volatile polar substance with good heat stability. It is resistant to discoloration with metal ions, e.g. from polymerisation catalyst residues, fillers or from contact surfaces. Hostavin VSU absorbs the UV light especially in the UV-B range, and is therefore a stabilizer of choice for combinations with optical brighteners and for UV curing systems. more

    • Nylostab® S-EED®

      Nylostab S-EED is a unique multifunctional additive specially tailored for high compatibility with nylons by molecular recognition. more

  • Products

    • Hostanox® O 3 pills

      Hostanox O 3 pills is a highly efficient phenolic antioxidant with high resistance against hydrolysis, providing long term heat stabilization to polyolefins and polyamide especially for applications where the final article comes in contact with extractive media such as water, fat etc. more

    • Hostanox® O 310 micro pills

      Hostanox O 310 micro pills effectively combines extraordinary high extraction resistance and hydrolytic stability with good stabilization performance. Therefore Hostanox O 310 micro pills is predestined for the stabilization of polymer articles requiring high level of stability even after an exposition to extractive media (e.g. water, solvents, etc). more

    • Hostanox® OSP 1

      Hostanox OSP 1 is a high efficient antioxidant and metal deactivator which prevents the auto-catalytic decomposition of polyolefins. The usage of metal deactivators is mandatory as long as the polyolefin based finished article comes into contact with transition metals, such as Cu, Fe, Ni, Ti, etc. more

    • Hostanox® SE 10

      Hostanox SE 10 is a thio-ether based highly effective co-stabilizer with excellent compatibility with polyolefins. more

    • Hostanox® SE 4

      Hostanox SE 4 is a highly effective secondary antioxidant for various plastics. more

    • Hostavin® N 30 P

      Hostavin N 30 P is an oligomeric hindered amine light stabilizer (HALS), designed for light stabilization of plastic materials. This HALS is characterized by its broad compatibility and excellent resistance to migration. more

    • Nylostab® S-EED®

      Nylostab S-EED is a unique multifunctional additive specially tailored for high compatibility with nylons by molecular recognition. more

     

  • Products

    • CONTAINER DRI® II

      Clariant's Container Dri® portfolio offers a broad line of container desiccants that offer versatile protection against damaging humidity and moisture during intermodal transport. Available in bags, poles and strips, these industry-leading products absorb up to three times their weight in moisture, and trap it as a thick gel that will not spill or drip. Questions about using desiccants? Call us. Preventing “Container Rain” A unique feature of Container Dri II desiccants, also referred to as moisture absorbing bags, or dry bags, is dew point control. Dew point is the temperature at which condensation starts to form on surfaces, such as container walls and roofs. By aggressively removing moisture from ambient air, Container Dri II products lower the dew point to prevent “container rain”, “container sweat”, or also known as “cargo sweat”, from damaging goods in transit. This system is highly effective in preventing the conditions that may cause mildew, warpage, corrosion, caking and other damage to agricultural products, bulk foods, powders, wood products, glass, furniture, automobile parts, leather goods, beans such as cocoa bean, and coffee bean, machinery and metal components. Container Dri II cargo desiccants can help manufacturers, shippers, distributors and other stakeholders protect brand equity, maintain their reputation for quality and safeguard revenues. Usage Scenarios The Container Dri II line of container desiccants are particularly valuable when: - there is a large volume of air requiring moisture removal - high levels of humidity are present due to climate, cargo or storage conditions - the container admits exterior air and humidity Food Shipments Container Dri II has already enjoyed success protecting cocoa bean shipments from moisture damage by providing the highest moisture absorption of any calcium chloride–based product, easily addressing the 65 percent or higher loading of calcium chloride recommended in the Federation of Cocoa Commerce Ltd. (FCC) guidelines for shipment of cocoa beans in containers. Read the full release here: Clariant Container Dri® II Desiccants Meet New FCC Guidelines for Cocoa Bean Shipments Sustainability - ECOTAIN ® Clariant's EcoTain ® label is awarded to products that are identified as best-in-class for sustainability and performance excellence to customers. Products are screened against 36 criteria across three dimensions: social, environment, and economic. Container Dri II delivered a positive benefit in all three, making Container Dri II the only cargo desiccant to carry an eco-label claim. For more information about our desiccant, oxygen absorber , and humidity indicator solutions, visit our Cargo & Device Protection page. Infographic: How to protect shipments from MOISTURE DAMAGE Join us on: Twitter Google+ LinkedIn YouTube Facebook more

    • DESICCANT BAGS

      Questions? Call us. Clariant manufactures a full line of moisture adsorbent bags which consist of strong, yet porous, nonwoven materials such as Dupont Tyvek®, filled with a variety of desiccant types : Desi Pak® - bentonite clay Sorb-It® - silica gel Tri-Sorb® - molecular sieve Used to protect a variety of goods as they travel through the supply chain, our bags comply with rigorous industry and government standards including FDA, DIN, Mil-Spec, and JEDEC. Commonly used for semiconductor dry packing, preservation packaging and export packaging, with typical applications including electronic devices, food packaging, equipment, automotive parts, machinery, military goods, metal components and many other valuables. Download our White Paper: Bentonite desiccants - The natural, sustainable desiccant solution for moisture controlled packaging For the protection of bulk pharmaceutical packaging, Clariant's Healthcare Packaging business line offers desiccant bags for pharmaceutical applications. For more information about our desiccant, oxygen absorber , and humidity indicator solutions, visit our Cargo & Device Protection page. Join us on: Twitter Google+ LinkedIn YouTube Facebook more

    • HUMIDITY INDICATOR CARDS & HUMIDITY INDICATOR PLUGS

      Humidity Indicator Questions? Call us. The originator of the color change humidity indicator card, Clariant Cargo & Device Protection leads the industry with a wide array of Humitector ™ humidity indicators. Following the most rigorous quality standards, including strict color meter testing, Clariant's humidity indicator cards and humidity indicator plugs are designed to meet standards set forth by military agencies and electronic/semiconductor companies, such as Mil-Spec and JEDEC respectively. Further, Clariant offers Maximum humidity indicator cards to the logistics industry, as well as humidity indicators for preservation and commercial applications. Selection includes: Cobalt-Dichloride Free Humidity Indicator Cards Cobalt Free Humidity Indicator Cards Desiccator Plugs & Humidity Indicators Humitector Humidity Indicator Cards For more information about our desiccant, oxygen absorber , and humidity indicator solutions, visit our Cargo & Device Protection page. Download our White Paper: Bentonite desiccants - The natural, sustainable desiccant solution for moisture controlled packaging Join us on: Twitter Google+ LinkedIn YouTube Facebook more

  • Products

    • Graphtol Carmine HF4C

      Graphtol Carmine HF4C is a bluish red pigment with good fastness properties. It is recommended for PVC, PE film and cable applications. more

    • Graphtol Red HF2B

      Graphtol Red HF2B is a standard pigment for PVC with excellent dielectric properties. In combination with PV Fast Yellow HR 02 or PV Fast Yellow HGR it is possible to match a wide range of orange and red color shades. more

    • Graphtol Yellow H2R

      Graphtol Yellow H2R is a red shade yellow pigment with high color strength. It can be used as a replacement for diarylide and lead chromate pigments. Its potential reaction with alkaline additives can lead to discoloration and a reduction in properties. It is recommended for PP fiber applications. more

    • Hostaprint Yellow H4G 32

      Hostaprint Yellow H4G 32 is a greenish yellow pigment preparation with excellent lightfastness and heat resistance. A reaction with alkaline additives may cause discoloration and reduction in properties. Suitable for exterior application. more

    • PV Fast Blue A2R

      PV Fast Blue A2R is an organic blue pigment with excellent fastness, resistance and dispersion properties. It is a versatile pigment with applications in all polymers. more

    • PV Fast Blue A4R

      PV Fast Blue A4R is a reddish blue pigment with very good fastness properties. It is an universal pigment with applications in most polymers. more

    • PV Fast Blue BG

      PV Fast Blue BG is a greenish blue pigment with excellent fastness and dispersion properties. A versatile pigment with applications in all polymers. more

    • PV Fast Brown HFR

      PV Fast Brown HFR is a red shade organic brown pigment with high fastness properties. It is distinguished by its excellent weather fastness. more

    • PV Fast Brown RL

      PV Fast Brown RL is a yellow shade organic brown pigment with excellent fastness properties. Suitable for exterior applications in PVC and polyolefins due to its excellent weather fastness. more

    • PV Fast Green GNX

      PV Fast Green GNX is an organic green pigment with excellent fastness and dispersion properties. It is suitable for most plastics. more

    • PV Fast Orange 6RL

      PV Fast Orange 6RL is a reddish orange pigment with high heat resistance and compatibility in a broad range of plastics. After preliminary testing, it is suitable for the coloration of polyamides and other engineering polymers. more

    • PV Fast Orange GRL

      PV Fast Orange GRL is a strong and brilliant orange pigment with very good heat resistance, light fastness and excellent fastness to weathering. more

    • PV Fast Orange H4GL 01

      PV Fast Orange H4GL 01 is a strong and brilliant yellow shade orange pigment with excellent light fastness and high heat stability. more

    • PV Fast Pink E

      PV Fast Pink E is a bluish red pigment with excellent fastness properties and outstanding dispersibility. Suitable for high-end applications and for most plastics. Recommended for fibre, film and thin-wall applications. more

    • PV Fast Pink E 01

      PV Fast Pink E 01 is a bluish red pigment with excellent fastness properties and therefore suitable for high-end applications and for coloration of most plastics. more

    • PV Fast Red B

      PV Fast Red B is a yellowish red pigment with high purity and excellent fastness properties. It is suitable as shading pigment and recommended for a wide range of applications and polymers. more

    • PV Fast Red D3G

      PV Fast Red D3G is a mid-shade red pigment with outstanding fastness properties in Polyolefins and PVC. more

    • PV Fast Red E3B

      PV Fast Red E3B is the bluish red shade version of Pigment Violet 19. It has an excellent heat resistance and outstanding fastness to light and weathering. more

    • PV Fast Red E4G

      PV Fast Red E4G is the yellowish red shade version of Pigment Violet 19. It has excellent heat resistance and outstanding fastness to light and weathering. more

    • PV Fast Red E5B

      PV Fast Red E5B is a bluish red shade version of Pigment Violet 19. It has an excellent heat resistance, light and weathering fastness. more

    • PV Fast Violet BLP

      PV Fast Violet BLP is a very strong and brilliant violet pigment, with high fastness levels. It is not recommended as tinting component. But in combination with phthalocyanine pigments it is possible to economically match navy shades. more

    • PV Fast Violet RL

      PV Fast Violet RL is a very strong and brilliant violet pigment with very high fastness levels. It is not recommended as tinting component but in combination with phthalocyanine pigments it is possible to match navy shades economically. more

    • PV Fast Yellow H2G

      PV Fast Yellow H2G is a greenish yellow pigment with excellent light fastness and resistance properties. It is recommend for a wide range of polymers and for outdoor applications. more

    • PV Fast Yellow H3R

      PV Fast Yellow H3R is a reddish yellow pigment with excellent light fastness and heat resistance. It can also be used as shading component. more

    • PV Fast Yellow H4G

      PV Fast Yellow H4G has an excellent light fastness, high weather fastness, high heat resistance and excellent dispersibility. Due to low influence on warpage it works very well for coloration of bottle crates, boxes and cases. more

    • PV Fast Yellow HR

      PV Fast Yellow HR is a very strong, pure and transparent reddish yellow pigment with excellent fastness and dielectric properties. It is not recommended for processing temperatures above 200 °C. more

    • PV Fast Yellow HR 02

      PV Fast Yellow HR 02 is a very strong, pure and transparent reddish yellow pigment with excellent fastness and dielectric properties. It is not recommended for processing temperatures above 200 °C. more

  • Products

    • Licocene® PE 4201 granules

      Licocene PE 4201 granules is a non-polar, low viscous polyethylene wax. more

    • Licocene® PE 4201 powder

      The highly efficient lubricant Licocene PE 4201 powder is a low viscous, non-polar polyethylene wax. more

    • Licocene® PE 5301 granules

      Licocene PE 5301 granules is a low viscosity, high melting point Metallocene catalyzed Polyethylene wax. more

    • Licocene® PE MA 4221 fine grain

      Licocene PE MA 4221 fine grain is a maleic anhydride grafted metallocene PE wax and acts as mold release agent in polyamides and polyester without effecting the initial color of the compounds. more

    • Licocene® PE MA 4351 fine grain

      Licocene PE MA 4351 fine grain is a highly grafted maleic anhydride polyethylene wax with advantageous physical properties e. g. for powder coating applications. The maleic anhydride modified polyethylene creates structured surfaces in combination with titanium dioxide. The roughness depends on the ratio of titanium dioxide to Licocene PE MA 4351 fine grain. Licocene PE MA 4351 fine grain is used as an efficient coupling agent for glass-, wood-, natural fibre and inorganic filled PE compounds more

    • Licocene® PE MA 4351 granules

      Licocene PE MA 4351 granules is a highly grafted maleic anhydride polyethylene wax with advantageous physical properties e. g. for powder coating applications. The maleic anhydride modified polyethylene creates structured surfaces in combination with titanium dioxide. The roughness depends on the ratio of titanium dioxide to Licocene PE MA 4351 granules. Licocene PE MA 4351 granules is used as an efficient coupling agent for glass-, wood-, natural fibre and inorganic filled PE compounds more

    • Licocene® PE MS 431 granules

      Licocene PE MS 431 granules is a stabilized maleic anhydride grafted polyethylene wax. more

    • Licocene® PE SI 3361 TP

      Licocene PE SI 3361 TP is a functionalized metallocene polyethylene wax modified with silane. more

    • Licocene® PP 1302 fine grain

      Licocene PP 1302 fine grain is a low melting, metallocene-technology based propylene-ethylene copolymer wax, which exhibits a low degree of crystallinity. more

    • Licocene® PP 1302 granules

      Licocene PP 1302 granules is a low melting, metallocene-technology based propylene-ethylene copolymer wax, which exhibits a low degree of crystallinity. more

    • Licocene® PP 1502 fine grain

      Licocene PP 1502 fine grain is a low melting, metallocene-technology based propylene-ethylene copolymer, which exhibits a low degree of crystallinity. more

    • Licocene® PP 1502 granules

      Licocene PP 1502 granules is a low melting, metallocene-technology based propylene-ethylene copolymer, which exhibits a low degree of crystallinity. more

    • Licocene® PP 1602 granules

      Licocene PP 1602 granules is a low melting, metallocene-technology based propylene-ethylene copolymer, which exhibits a low degree of crystallinity. more

    • Licocene® PP 2602 granules

      Licocene PP 2602 granules is a low crystalline metallocene-technology based propylene-ethylene-copolymer. more

    • Licocene® PP 3602 granules

      Licocene PP 3602 granules is a low crystalline metallocene-technology based propylene-ethylene-copolymer. more

    • Licocene® PP 6102 fine grain

      Licocene PP 6102 fine grain is a low viscous, crystalline metallocene polypropylene wax. more

    • Licocene® PP 6102 granules

      Licocene PP 6102 granules is a low viscous, crystalline metallocene polypropylene wax. more

    • Licocene® PP 6502 fine grain

      Licocene PP 6502 fine grain is a high melting, metallocene-technology based polypropylene homopolymer, which exhibits a high degree of crystallinity. more

    • Licocene® PP 6502 granules

      Licocene PP 6502 granules is a high melting, metallocene-technology based polypropylene homopolymer, which exhibits a high degree of crystallinity. more

    • Licocene® PP 7502 fine grain

      Licocene PP 7502 fine grain is a high melting, metallocene-technology based polypropylene homopolymer, which exhibits a high degree of crystallinity. more

    • Licocene® PP 7502 granules

      Licocene PP 7502 granules is a high melting, metallocene-technology based polypropylene homopolymer, which exhibits a high degree of crystallinity. more

    • Licocene® PP MA 1332 TP

      Licocene PP MA 1332 TP is a propylene-ethylene-maleic anhydride copolymer. more

    • Licocene® PP MA 6252 granules

      Licocene PP MA 6252 granules is a maleic anhydride grafted polypropylene wax. more

    • Licocene® PP MA 6452 fine grain

      Licocene PP MA 6452 fine grain is a maleic anhydride grafted polypropylene wax. more

    • Licocene® PP MA 6452 granules

      Licocene PP MA 6452 granules is a maleic anhydride grafted polypropylene wax. more

    • Licocene® PP MA 7452 granules TP

      Licocene PP MA 7452 granules TP is a maleic anhydride grafted polypropylene wax. more

    • Licocene® PP MS 641 granules TP

      Licocene PP MS 641 granules TP is a stabilized maleic anhydride grafted polypropylene wax. more

  • Products

    • Licocene® PP MA 1332 TP

      Licocene PP MA 1332 TP is a propylene-ethylene-maleic anhydride copolymer. more

    • Licowax® E flakes

      Licowax E flakes is an ester of montanic acids with multifunctional alcohols. The montanic acids contained in raw montan wax are straightchain, unbranched monocarboxylic acids with a chain length in the range of C 28 -C 32 . As a result of the long chain these montanic acids have a high thermostability and a low volatility as well as a low tendency to migration. Licowax E flakes is used as lubricant and dispersing agent in a wide variety of polymers like PVC, PS, PBT, PA, PDM, PC, TPU. Licowax E flakes is also applied in polish & care industries, such as shoe & leather care, car care. It is a hard ester wax and good paste forming properties and it is easily emulsifiable. more

    • Licowax® KC 132 granules TP

      Licowax KC 132 granules TP is a modified montan-based ester wax. more

    • Licowax® KLE flakes

      Licowax KLE flakes is an emulsifier containing montan ester wax. more

    • Licowax® KSL flakes

      Licowax KSL flakes is an ester of montanic acids with multifunctional alcohols. more

    • Licowax® KST

      Licowax KST is an ester of montanic acids with multifunctional alcohols with a very low drop point. more

    • Licowax® LP flakes

      Licowax LP flakes is a montanic acid wax. more

    • Licowax® O flakes

      Licowax O flakes is a partly saponified ester wax. more

    • Licowax® OP flakes

      Licowax OP flakes is a partly saponified ester wax of montanic acids used for a wide variety of polymers as multifunctional lubricant and dispersing agent. Suitable for PVC, engineering resins, thermosets etc. In addition, it is used in solvent-based polish applications, thanks to its excellent paste-forming and solvent-binding capacity. more

    • Licowax® PE 130 granules

      Licowax PE 130 granules is a non-polar high density polyethylene wax. more

    • Licowax® PE 520 granules

      Licowax PE 520 granules is a medium-molecular weight, non-polar polyethylene wax. more

    • Licowax® PED 191 flakes

      Licowax PED 191 flakes is an oxidized, high density polyethylene wax with high molecular weight. more

    • Licowax® PED 192 flakes

      Licowax PED 192 flakes is an oxidized, high density polyethylene wax. more

    • Licowax® R 21 flakes

      Licowax R 21 flakes is a branched alkane carboxylic acid/salt mixture. more

    • Licowax® S flakes

      Licowax S flakes is an acid wax used in a wide variety of applications, such as an external release agent (e.g. for thermosets and engineering plastics), emulsifier (e.g. for paraffin) and additives in care products (for its protection and gloss properties) more

    • Licowax® SC 131 flakes TP

      Licowax SC 131 flakes TP is a modified montan-based acid wax. more

    • Wax Emulsifier 2106

      Wax Emulsifier 2106 is a wax emulsifier containing alkyl phenol ethoxylate. more

    • Wax Emulsifier 4106

      Wax Emulsifier 4106 is a wax emulsifier containing Alkylethoxylates. more

  • Products

    • Licocene® PE 4201 granules

      Licocene PE 4201 granules is a non-polar, low viscous polyethylene wax. more

    • Licocene® PE 4201 powder

      The highly efficient lubricant Licocene PE 4201 powder is a low viscous, non-polar polyethylene wax. more

    • Licocene® PE MA 4221 fine grain

      Licocene PE MA 4221 fine grain is a maleic anhydride grafted metallocene PE wax and acts as mold release agent in polyamides and polyester without effecting the initial color of the compounds. more

    • Licocene® PE MA 4351 fine grain

      Licocene PE MA 4351 fine grain is a highly grafted maleic anhydride polyethylene wax with advantageous physical properties e. g. for powder coating applications. The maleic anhydride modified polyethylene creates structured surfaces in combination with titanium dioxide. The roughness depends on the ratio of titanium dioxide to Licocene PE MA 4351 fine grain. Licocene PE MA 4351 fine grain is used as an efficient coupling agent for glass-, wood-, natural fibre and inorganic filled PE compounds more

    • Licocene® PE MA 4351 granules

      Licocene PE MA 4351 granules is a highly grafted maleic anhydride polyethylene wax with advantageous physical properties e. g. for powder coating applications. The maleic anhydride modified polyethylene creates structured surfaces in combination with titanium dioxide. The roughness depends on the ratio of titanium dioxide to Licocene PE MA 4351 granules. Licocene PE MA 4351 granules is used as an efficient coupling agent for glass-, wood-, natural fibre and inorganic filled PE compounds more

    • Licolub® CE 2 fine grain

      Licolub CE 2 fine grain is a highly polar modified copolymer wax. more

    • Licolub® CE 2 granules

      Licoclub CE 2 granules is a highly polar modified copolymer wax. more

    • Licolub® FA 1 powder vegetable based

      Licolub FA 1 powder vegetable based is an amide wax of type N,N-bis-stearyl ethylenediamine with particularly good thermostability. It provides typical slip and anti blocking characteristics to all polymers e.g. in films. Licolub FA 1 powder vegetable based does not affect the transparency of polymers and acts as lubricant in a wide variety of polymers like PVC, PO, PS and engineering plastics. Licolub FA 1 powder vegetable based is produced from a raw material of vegetable origin. more

    • Licolub® H 12 fine grain

      Licolub H 12 fine grain is an oxidized polyehtylene wax, also has a strong antisticking effect in PVC an Thermoplastics. Important areas of applications are pipe and profile extrusion and extrusion blow molding, especially when the final product does not require high transparency. Also used as an efficiend lubricant in PO based Wood Plastic Composites. more

    • Licolub® H 4

      Licolub H 4 is a modified hydrocarbon wax with an external lubricating effect, which is used primarily in extrusion of rigid PVC pipes and profiles. more

    • Licolub® WE 4 powder

      Licolub WE 4 powder is an ester of montanic acids with a polyol. Due to its polar center and the long, non-polar hydrocarbon chains, Licolub WE 4 powder combines internal and primarily external lubrication effects in the processing of engineering resins and PVC, especially in Polyester compounds. In calendering of rigid PVC films Licolub WE 4 powder offers excellent lubrication properties at high thermal stability and low volatility. more

    • Licolub® WE 40 powder

      Licolub WE 40 powder is a complex ester of montanic acids. Licolub WE 40 powder is used as an efficient, multi-functional lubricant in engineering resins as well as for the processing of PVC. more

    • Licolub® WM 31 flakes

      Licolub WM 31 flakes is an ester based on montanic acids and long chain aliphatic acids. Licolub WM 31 flakes is especially used in PVC as cost efficient multifunctional lubricant. more

    • Licolub® WM 31 powder

      Licolub WM 31 powder is an ester based on montanic acids and long chain aliphatic acids. Licolub WM 31 powder is especially used in PVC as cost efficient multifunctional lubricant. more

    • Licomont® CaV 102 fine grain

      Licomont CaV 102 fine grain is a calcium salt of long chain, saturated, linear carboxylic acids (montanic acids), providing excellent nucleating and lubricating effects in all kinds of injection moulded polyamides. In injection moulding applications of polyamides the reduction of the cycle time up to 25 % is possible. Due to the chemical nature, Licomont CaV 102 fine grain obtains excellent thermal stability, low volatility and color stability. Licomont CaV 102 fine grain does also not affect the transparency and the mechanical properties of polyamides and has no influence on polymer degradation. Licomont CaV 102 fine grain combines the advantages of a lubricating and nucleating agent in one product and is very effective at low concentrations (~ 0.2 – 0.5 %). more

    • Licomont® CaV 102 powder

      Licomont CaV 102 powder is a calcium salt of long chain, saturated, linear carboxylic acids (montanic acids), providing excellent nucleating and lubricating effects in all kinds of injection moulded polyamides. In injection moulding applications of polyamides the reduction of the cycle time up to 25 % is possible. Due to the chemical nature, Licomont CaV 102 powder obtains excellent thermal stability, low volatility and color stability. Licomont CaV 102 powder does also not affect the transparency and the mechanical properties of polyamides and has no influence on polymer degradation. Licomont CaV 102 powder combines the advantages of a lubricating and nucleating agent in one product and is very effective at low concentrations (~ 0.2 – 0.5 %). more

    • Licomont® NaV 101

      Licomont NaV 101 is a sodium salt of montanic acids Licomont NaV 101 acts as a suitable nucleating agent in PET and PBT. Due to the high molecular weight, it has a low volatility and favourable migration characteristics in the finished product. In addition to the excellent nucleation effect of the Licomont NaV 101, this product also has outstanding lubrication and mold- release effects. Licomont NaV 101 is effective at concentrations of 0.1 – 0.4 % in polyester. more

    • Licowax® C micro powder PM

      Licowax C micro powder PM is an amide wax used in powder metallurgy. more

    • Licowax® C powder

      Licowax C powder is an amide wax of type N,N-bis-stearyl ethylenediamine with particularly good thermostability. It provides typical slip and anti blocking characteristics to all polymers e.g. in films. Licowax C powder does not affect the transparency of polymers and acts as lubricant in a wide variety of polymers like PVC, PO, PS and engineering plastics. more

    • Licowax® E flakes

      Licowax E flakes is an ester of montanic acids with multifunctional alcohols. The montanic acids contained in raw montan wax are straightchain, unbranched monocarboxylic acids with a chain length in the range of C 28 -C 32 . As a result of the long chain these montanic acids have a high thermostability and a low volatility as well as a low tendency to migration. Licowax E flakes is used as lubricant and dispersing agent in a wide variety of polymers like PVC, PS, PBT, PA, PDM, PC, TPU. Licowax E flakes is also applied in polish & care industries, such as shoe & leather care, car care. It is a hard ester wax and good paste forming properties and it is easily emulsifiable. more

    • Licowax® E powder

      Licowax E powder is an ester of montanic acids with multifunctional alcohols. The montanic acids contained in raw montan wax are straightchain, unbranched monocarboxylic acids with a chain length in the range of C 28 -C 32 . As a result of the long chain these montanic acids have a high thermostability and a low volatility as well as a low tendency to migration. Licowax E powder is used as lubricant and dispersing agent in a wide variety of polymers like PVC, PS, PBT, PA, PDM, PC, TPU. more

    • Licowax® OP flakes

      Licowax OP flakes is a partly saponified ester wax of montanic acids used for a wide variety of polymers as multifunctional lubricant and dispersing agent. Suitable for PVC, engineering resins, thermosets etc. In addition, it is used in solvent-based polish applications, thanks to its excellent paste-forming and solvent-binding capacity. more

    • Licowax® OP powder

      Licowax OP powder is a partly saponified ester wax of montanic acids used for a wide variety of polymers as multifunctional lubricant and dispersing agent. Suitable for PVC, engineering resins, thermosets etc. more

    • Licowax® PE 190 powder

      Licowax PE 190 powder is a non-polar high density polyethylene with low molecular weight. more

    • Licowax® PE 520 fine grain

      Licowax PE 520 fine grain is a medium-molecular weight, non-polar polyethylene wax. more

    • Licowax® PE 520 granules

      Licowax PE 520 granules is a medium-molecular weight, non-polar polyethylene wax. more

    • Licowax® PE 520 powder

      Licowax PE 520 powder is a medium-molecular weight, non-polar polyethylene wax. more

    • Licowax® PED 191 flakes

      Licowax PED 191 flakes is an oxidized, high density polyethylene wax with high molecular weight. more

    • Licowax® PED 191 powder

      Licowax PED 191 powder is an oxidized, high density polyethylene wax with high molecular weight. more

  • Products

    • Licocene® PE 4201 granules

      Licocene PE 4201 granules is a non-polar, low viscous polyethylene wax. more

    • Licocene® PE 4201 powder

      The highly efficient lubricant Licocene PE 4201 powder is a low viscous, non-polar polyethylene wax. more

    • Licocene® PE MA 4221 fine grain

      Licocene PE MA 4221 fine grain is a maleic anhydride grafted metallocene PE wax and acts as mold release agent in polyamides and polyester without effecting the initial color of the compounds. more

    • Licocene® PE MA 4351 fine grain

      Licocene PE MA 4351 fine grain is a highly grafted maleic anhydride polyethylene wax with advantageous physical properties e. g. for powder coating applications. The maleic anhydride modified polyethylene creates structured surfaces in combination with titanium dioxide. The roughness depends on the ratio of titanium dioxide to Licocene PE MA 4351 fine grain. Licocene PE MA 4351 fine grain is used as an efficient coupling agent for glass-, wood-, natural fibre and inorganic filled PE compounds more

    • Licocene® PE MA 4351 granules

      Licocene PE MA 4351 granules is a highly grafted maleic anhydride polyethylene wax with advantageous physical properties e. g. for powder coating applications. The maleic anhydride modified polyethylene creates structured surfaces in combination with titanium dioxide. The roughness depends on the ratio of titanium dioxide to Licocene PE MA 4351 granules. Licocene PE MA 4351 granules is used as an efficient coupling agent for glass-, wood-, natural fibre and inorganic filled PE compounds more

    • Licocene® PP 1302 fine grain

      Licocene PP 1302 fine grain is a low melting, metallocene-technology based propylene-ethylene copolymer wax, which exhibits a low degree of crystallinity. more

    • Licocene® PP 1302 granules

      Licocene PP 1302 granules is a low melting, metallocene-technology based propylene-ethylene copolymer wax, which exhibits a low degree of crystallinity. more

    • Licocene® PP 1502 fine grain

      Licocene PP 1502 fine grain is a low melting, metallocene-technology based propylene-ethylene copolymer, which exhibits a low degree of crystallinity. more

    • Licocene® PP 1502 granules

      Licocene PP 1502 granules is a low melting, metallocene-technology based propylene-ethylene copolymer, which exhibits a low degree of crystallinity. more

    • Licocene® PP 1602 granules

      Licocene PP 1602 granules is a low melting, metallocene-technology based propylene-ethylene copolymer, which exhibits a low degree of crystallinity. more

    • Licocene® PP 2602 granules

      Licocene PP 2602 granules is a low crystalline metallocene-technology based propylene-ethylene-copolymer. more

    • Licocene® PP 3602 granules

      Licocene PP 3602 granules is a low crystalline metallocene-technology based propylene-ethylene-copolymer. more

    • Licocene® PP 6102 fine grain

      Licocene PP 6102 fine grain is a low viscous, crystalline metallocene polypropylene wax. more

    • Licocene® PP 6102 granules

      Licocene PP 6102 granules is a low viscous, crystalline metallocene polypropylene wax. more

    • Licocene® PP 6502 fine grain

      Licocene PP 6502 fine grain is a high melting, metallocene-technology based polypropylene homopolymer, which exhibits a high degree of crystallinity. more

    • Licocene® PP 6502 granules

      Licocene PP 6502 granules is a high melting, metallocene-technology based polypropylene homopolymer, which exhibits a high degree of crystallinity. more

    • Licocene® PP 7502 fine grain

      Licocene PP 7502 fine grain is a high melting, metallocene-technology based polypropylene homopolymer, which exhibits a high degree of crystallinity. more

    • Licocene® PP 7502 granules

      Licocene PP 7502 granules is a high melting, metallocene-technology based polypropylene homopolymer, which exhibits a high degree of crystallinity. more

    • Licocene® PP MA 6452 fine grain

      Licocene PP MA 6452 fine grain is a maleic anhydride grafted polypropylene wax. more

    • Licocene® PP MA 6452 granules

      Licocene PP MA 6452 granules is a maleic anhydride grafted polypropylene wax. more

    • Licocene® PP MA 7452 granules TP

      Licocene PP MA 7452 granules TP is a maleic anhydride grafted polypropylene wax. more

    • Licolub® CE 2 fine grain

      Licolub CE 2 fine grain is a highly polar modified copolymer wax. more

    • Licolub® CE 2 granules

      Licoclub CE 2 granules is a highly polar modified copolymer wax. more

    • Licolub® FA 1 powder vegetable based

      Licolub FA 1 powder vegetable based is an amide wax of type N,N-bis-stearyl ethylenediamine with particularly good thermostability. It provides typical slip and anti blocking characteristics to all polymers e.g. in films. Licolub FA 1 powder vegetable based does not affect the transparency of polymers and acts as lubricant in a wide variety of polymers like PVC, PO, PS and engineering plastics. Licolub FA 1 powder vegetable based is produced from a raw material of vegetable origin. more

    • Licolub® H 12 fine grain

      Licolub H 12 fine grain is an oxidized polyehtylene wax, also has a strong antisticking effect in PVC an Thermoplastics. Important areas of applications are pipe and profile extrusion and extrusion blow molding, especially when the final product does not require high transparency. Also used as an efficiend lubricant in PO based Wood Plastic Composites. more

    • Licolub® H 4

      Licolub H 4 is a modified hydrocarbon wax with an external lubricating effect, which is used primarily in extrusion of rigid PVC pipes and profiles. more

    • Licowax® C micro powder PM

      Licowax C micro powder PM is an amide wax used in powder metallurgy. more

    • Licowax® C powder

      Licowax C powder is an amide wax of type N,N-bis-stearyl ethylenediamine with particularly good thermostability. It provides typical slip and anti blocking characteristics to all polymers e.g. in films. Licowax C powder does not affect the transparency of polymers and acts as lubricant in a wide variety of polymers like PVC, PO, PS and engineering plastics. more

    • Licowax® E flakes

      Licowax E flakes is an ester of montanic acids with multifunctional alcohols. The montanic acids contained in raw montan wax are straightchain, unbranched monocarboxylic acids with a chain length in the range of C 28 -C 32 . As a result of the long chain these montanic acids have a high thermostability and a low volatility as well as a low tendency to migration. Licowax E flakes is used as lubricant and dispersing agent in a wide variety of polymers like PVC, PS, PBT, PA, PDM, PC, TPU. Licowax E flakes is also applied in polish & care industries, such as shoe & leather care, car care. It is a hard ester wax and good paste forming properties and it is easily emulsifiable. more

    • Licowax® E powder

      Licowax E powder is an ester of montanic acids with multifunctional alcohols. The montanic acids contained in raw montan wax are straightchain, unbranched monocarboxylic acids with a chain length in the range of C 28 -C 32 . As a result of the long chain these montanic acids have a high thermostability and a low volatility as well as a low tendency to migration. Licowax E powder is used as lubricant and dispersing agent in a wide variety of polymers like PVC, PS, PBT, PA, PDM, PC, TPU. more

    • Licowax® OP flakes

      Licowax OP flakes is a partly saponified ester wax of montanic acids used for a wide variety of polymers as multifunctional lubricant and dispersing agent. Suitable for PVC, engineering resins, thermosets etc. In addition, it is used in solvent-based polish applications, thanks to its excellent paste-forming and solvent-binding capacity. more

    • Licowax® OP powder

      Licowax OP powder is a partly saponified ester wax of montanic acids used for a wide variety of polymers as multifunctional lubricant and dispersing agent. Suitable for PVC, engineering resins, thermosets etc. more

    • Licowax® PE 190 powder

      Licowax PE 190 powder is a non-polar high density polyethylene with low molecular weight. more

    • Licowax® PE 520 fine grain

      Licowax PE 520 fine grain is a medium-molecular weight, non-polar polyethylene wax. more

    • Licowax® PE 520 granules

      Licowax PE 520 granules is a medium-molecular weight, non-polar polyethylene wax. more

    • Licowax® PE 520 powder

      Licowax PE 520 powder is a medium-molecular weight, non-polar polyethylene wax. more

    • Licowax® PED 191 flakes

      Licowax PED 191 flakes is an oxidized, high density polyethylene wax with high molecular weight. more

    • Licowax® PED 191 powder

      Licowax PED 191 powder is an oxidized, high density polyethylene wax with high molecular weight. more

  • Products

    • Hydrocerol®

      Hydrocerol chemical foaming and nucleating agents from Clariant Masterbatches are commonly used in consumer goods and automotive components to reduce part weight without compromising stiffness or mechanical properties. In packaging, they save material and improve productivity, while preserving aesthetic appeal. Recently developed Clariant technology yields foam with smaller and more uniform cells so that processors can use 10 to 20% less plastic to create components that are visually identical to heavier, solid-walled parts. This makes Hydrocerol very attractive to companies committed to reducing the potential environmental impact of their products. For more details see the Innovation Spotlight page for Hydrocerol. more

    • RENOL

      Today’s demanding applications require the high-performance properties found in modern engineering polymers. To create the bright, durable and consistent colors that succeed in consumer marketplace, designers turn to RENOL masterbatches from Clariant. more

    • REMAFIN

      Under the REMAFIN brand name, Clariant markets color masterbatches (color concentrates) specially formulated for use in polyolefin polymers, including high-density, low-density and linear low-density polyethylene (PE), and polypropylene (PP). These materials are commonly used in injection molding, blow molding, film extrusion and other plastics processes. more

    • OMNICOLOR®

      OMNICOLOR® color concentrates are based on a multipurpose compatible carrier system. more

    • HiFormer

      HiFormer® – the brand new system for liquid masterbatches. Exploring new and innovative dimensions in design, flexibility and performance with brand owners and plastics processors. more

    • CESA Brand

      Specified in virtually every major market and industry, Clariant’s comprehensive line of CESA additive masterbatches offers unprecedented opportunities to improve the properties, performance and quality of finished products, while also optimizing productivity and costs. The CESA product line includes an exceptionally broad selection of standard additive masterbatches for use with all commercially available polymers. In addition, we can develop custom masterbatches as well as masterbatches combining active ingredients with selected pigments and dyestuffs, in order to meet virtually any special customer requirement. more


Download File

Please enter your contact details and the file will start downloading immediately after your details have been submitted. This only has to be done for the first file you download on this site. Thank you for your understanding.

Personal Information

Your Name *

 

Your Email *

Your position

Your Company

Request to Clariant

Please enter your contact information so we are able to process your request. Thank you for your interest.

Your Name

 

Your Email

Your position

Your Company

Country

Phone

Message

Disclaimer:
This information corresponds to the present state of our knowledge and is intended as a general description of our products and their possible applications. Clariant makes no warranties, express or implied, as to the information’s accuracy, adequacy, sufficiency or freedom from defect and assumes no liability in connection with any use of this information. Any user of this product is responsible for determining the suitability of Clariant’s products for its particular application.<br />
<br />
* Nothing included in this information waives any of Clariant’s General Terms and Conditions of Sale, which control unless it agrees otherwise in writing. Any existing intellectual/industrial property rights must be observed. Due to possible changes in our products and applicable national and international regulations and laws, the status of our products could change. Material Safety Data Sheets providing safety precautions, that should be observed when handling or storing Clariant products, are available upon request and are provided in compliance with applicable law. You should obtain and review the applicable Material Safety Data Sheet information before handling any of these products. For additional information, please contact Clariant.<br />
<br />
* For sales to customers located within the United States and Canada the following applies in addition: No express or implied warranty is made of the merchantability, suitability, fitness for a particular purpose or otherwise of any product or service.<br />
<br />
© Trademark of Clariant registered in many countries.<br />
® 2013 Clariant International Ltd 

You are about to leave the Clariant domain

The link you activated will take you outside the Clariant site in about 10 seconds. If you want to stop this, press "Cancel".