Product Redirector

HYTREAT DF 19512A ECO is a complex blend of anti-agglomerate hydrate inhibitors and surfactants in a naphthalene-depleted hydrocarbon solvent. The product is intended for use in gas-condensate and black oil production systems where hydrate formation occurs. It is highly effective at inhibiting hydrate agglomeration and allows transportation of a hydrate slurry. The product has an improved environmental profile over conventional anti-agglomerants and is suitable for subsea umbilical/capillary injection.

HYTREAT DF 19630A ECO is a complex blend of anti-agglomerate hydrate inhibitors and surfactants in a naphthalene-depleted hydrocarbon solvent. The product is intended for use in gas-condensate and black oil production systems where hydrate formation occurs. It is highly effective at inhibiting hydrate agglomeration and allows transportation of a hydrate slurry. The product has an improved environmental profile over conventional anti-agglomerants and is suitable for subsea umbilical/capillary injection.

Highly effective demineralizer and iron chelating agent for cotton and polyester-cotton blends.

Low-foaming mercerizing agent that enhances caustic penetration into fabrics during the mercerization process for cotton substrates

Concentrated wetting agent and detergents for scouring & bleaching of cotton & blends

Nonionic scouring, wetting and soaping agent for textile wet processing for cotton & blends, synthetic and wool fibers

Sequestering agent for peroxide bleaching compounds & dyeing

Anionic surfactant-based wetting and penetrating agent effective at low concentrations for cotton & blends

Economical low foaming wetting agent and detergents for desizing of cotton & blends in discontinuous and semicontinuous process

Economical wetting agent and detergents for soaping off cotton & blends

Highly concentrated, low foaming mercerisation wetting agent for cotton substrates

All-rounder concentrated wetting agent for cotton and blends used for pre-wetting fabric before printing or dispersing pigments and dyes, and for batch processes for yarn in home textiles

Concentrated sequestering agent for peroxide bleaching & dyeing

All-rounder silicate-free stabilizer for peroxide bleaching of cotton, suitable for both batch and continuous processing

Highly concentrated low foaming wetting agent and detergents for desizing of cotton & blends in discontinuous and semi-continuous process

Low foaming scouring and wetting agent for continuous pre-treatment processes

Economical and concentrated detergent

Stain remover and scouring agent for cotton & polyester fabrics

Concentrated scouring agent for continuous pre-treatment processes

Low foaming scouring and wetting agent for continuous pre-treatment processes

Polymeric soaping agent and dye bath conditioner for reactive & direct dyes

Concentrated softener for cotton & blends

Low foam wetting and de-aerating agent for continuous and semi-continuous dyeing

Highly concentrated levelling and stripping agent to disperse dyes on polyester

Concentrated loop accelerator for polyester printing

Nonionic surfactant-based anti-choking agent for textile printing applications for cotton and blends

Versatile levelling agent for all dye types on cotton, including reactive and direct dyes

Economical washing-off agent for reactive and direct dyes for cotton & blends

Formaldehyde-free cationic resin-based dye fixing agent for reactive and direct dyes on cellulosic & blended fabrics

Polyethylene softener for surface smoothness & tearing strength improvement of cotton & synthetic blends

Concentrated anticreasing/lubricating agent in dyeing process

Economical scouring agent for continuous pre-treatment processes

Dispersing & levelling agent to disperse dyes for polyester

Concentrated loop accelerator for polyester & nylon printing

Anionic surfactant-based washing off and soaping agent for reactive & direct dyes for cotton and blends

Concentrated dye fixing agent for reactive and direct dyes. Formaldehyde-free

Lubricating agent for cotton & synthetic blended yarns & fabrics

FLOCTREAT 3956 is a cationic dispersion with a low to medium molecular weight, and is a water soluble acrylamide-based copolymer supplied as an oil free dispersion of polymer in water. It is effective over a pH range of 3 - 10 and does not contain any oil or surfactants. The polymer molecule contains both hydrophobic and hydrophilic groups. It is used to treat wastewater produced by a wide variety of oil industry operations by bridging between oil droplets and/or suspended solids to form a large, agglomerated mass or flocculant which can be easily removed. It can be utilized in liquid-solid separation processes such as settling, thickening, dissolved air flotation, and centrifugation, either alone or with an organic or inorganic coagulant.

FLOCTREAT 19338 is a proprietary technology, based on polymeric dithiocarbamates, used for deoiler and water clarification applications in oil and gas processing systems.

FLOCTREAT 7856 is a liquid cationic polyamine polyelectrolyte that is resistant to chlorine. It has a low molecular weight with a high charge density. It is used as a coagulant to improve the efficiency of high flow rate water filtration units and has been used with sand, mixed media garnet/anthracite, diatomaceous earth, and polypropylene sock type filters.

FLOCTREAT 7843 is an anionic emulsion polymer that has a high ionic charge and molecular weight. It is effective as a flocculant for oil water clarification, particularly suited to induced air flotation, coalescers and separators. It can be dosed neat or diluted in water to prepare stable dispersions for treatment.

FLOCTREAT 7550 is an acrylic based copolymer emulsion effective as a flocculant for oil water clarification, particularly suited to induced air flotation, coalescers and separators. It has excellent handling characteristics and can be applied as supplied into the system without the need for prior dilution.

FLOCTREAT 7924 is an anionic emulsion polymer that has a high ionic charge and molecular weight. It is effective as a flocculant for oil water clarification, particularly suited to induced air flotation, coalescers and separators. It can be dosed neat or diluted by preparing a 0.5 to 1.5% dispersion in water using a let-down system. Normal dosage rates are 1 to 10 ppm.

FLOCTREAT 7844 is a liquid grade flocculating agent that can be used to clarify a variety of industrial waters. It is effective as a flocculant for water streams such as sea water or other source waters used for pressure support in injection facilities. The product can also be used in produced water handling systems to aid clarification. It should be applied as supplied at dose rates of 1 - 10 ppm depending on the system characteristics and solids loading.

FLOCTREAT 15855 is a proprietary technology, based on polymeric dithiocarbamates, used for deoiler and water clarification applications in oil and gas processing systems. It is applied continuously upstream of process locations to improve water quality by reducing high oil or suspended solids. It can be used with water processing systems such as Gas Flotation Units (GFUs), Hydrocyclone Units (HCUs), and gravity settling tanks to reduce settling times and improve flow rates.

FLOCTREAT 7845 is a 40-42% w/w aqueous solution of ferric sulphate used in water injection systems to aid the filtration process. Typical dose levels are 0.1 to 0.5 mg/l as iron.

Bentomix™ GF is an advanced controlled-release granular fertilizer technology developed to solve one of agriculture's most persistent challenges: nutrient loss between application and plant uptake. By controlling the rate at which nutrients become available throughout the crop cycle, Bentomix™ GF ensures that nutrients reach the plant according to demand — reducing losses, cutting reapplication frequency, and contributing to more sustainable fertilization practices. Its specific mineral composition and coating mechanism deliver consistent performance even under variations in humidity and temperature, making it suitable for intensive crop management in diverse climate conditions.

Hordaphos CC MS is a phosphate ester used as a component for acid cleaning applications. It is suitable for cleaning painted surfaces such as road and rail vehicles (car wash), and for cleaning plants and equipment in the food processing industry, including dairy plants, milking machines, storage fermentation and pressure tanks, as well as sanitary cleaners. It offers higher solubility for various salts and oxides than phosphoric acid, helping prevent precipitates, and is effective even in hard water with low corrosion rates on metallic and non-metallic materials. It also provides good limescale dissolving power.

SENSOTAIN™ PTIS is a clear, odorless liquid. It offers a rich, cushiony emollience. With its high refractive index and excellent heat stability, SENSOTAIN™ PTIS is recommended for use in skincare, sun care, and makeup products. It has a very mild taste, making it particularly suitable for lipstick and lip care formulations.

Synergen™ SP 10 A is a unique silicon-free adjuvant blend combining NIS and anionic components for superior spreading performance. It can be used as a ready-to-use tank-mix adjuvant in arable and high value crops and shows excellent retention and foliar coverage with strong surface tension reduction. Synergen™ SP 10 A remains stable in low pH and high salt environments while being plant safe.

Tailored solutions for data center/direct-to-chip cooling, based on on physiologically harmless monopropylene glycol (MPG).

Tailored solutions for data center/direct-to-chip cooling. The low-conductivity fluid for sensitive cooling systems.

Tailored solutions for data center/direct-to-chip cooling, based on traditional monoethylene glycol (MEG).

Cationic softener delivering a smooth and silky texture to cotton, acrylic, and blended fabrics

Robust scouring agent that effectively removes soil and fats from grey cotton fabrics while preventing re-deposition, suitable for both batch and continuous processes

Micro-crystalline oxidized polyethylene softener for knitted fabric for inner wear

Alpha amylase desizing enzyme of cotton & blends in continuous and semi-continuous process

Low formaldehyde anticrease self-crosslinking resin for cellulosics & their blends

Emulsogen™ MTP 050 is a multifunctional label-free nonionic emulsifier for metal working fluids with outstanding low pour point and low foaming properties. Emulsogen™ MTP 050 also exhibits very good lime soap dispersing properties and is able to disperse large quantities of calcium oleate or tallate. Because of its excellent solubility in almost all kinds of mineral oils, Emulsogen™ MTP 050 can be used as an anti-wear additive to improve lubricity. Emulsogen™ MTP 050 has a sustainable profile, reducing the impact on the environment and being safe to personal health.

Hostaphat 1308 K is an aqueous solution of tridecyl polyethylene glycol ether-orthophosphate ester, potassium salt. It is mainly used as an emulsifier in emulsion polymerization, as an allrounder for common monomers (acrylic, vinyl, styrene...). Moreover, it can also be used as a dispersing agent for pigments in aqueous dispersions, and as a wetting agent and detergent in vehicle and industrial cleaning and textile finishing processes.

Licocare RBW 222 P TP TERRA is a high-performing additive based on renewable, non-food competing feedstock, which provides favorable chemical structure. Licocare RBW 222 P TP TERRA demonstrates high thermal stability, low volatility, and low tendency for migration. As a result, Licocare RBW 222 P TP TERRA is used as a lubricant and dispersing agent in a wide variety of polymers, predominantly in TPU and engineering resins.

Licocare RBW 226 P TP TERRA is a high-performing additive based on renewable, non-food competing feedstock, which provides favorable chemical structure. Licocare RBW 226 P TP TERRA demonstrates high thermal stability, low volatility, and low tendency for migration. As a result, Licocare RBW 226 P TP TERRA is used as a lubricant and dispersing agent in a wide variety of polymers, predominantly in TPU and engineering resins.

Hostaphat 1309 LD is a phosphoric acid ester of isotridecyl polyethylene glycol ether (with 9 EO) used as an emulsifier for emulsion polymerization. Its low dioxan content (< 10 ppm) allows it to be food contact compliant.

Hostaphat 1306 LD is a phosphoric acid ester of isotridecyl polyethylene glycol ether (with 6 EO) used as emulsifier for emulsion polymerization. Its low dioxan content (< 10 ppm) allows it to be food contact compliant.

Genapol X 1085 is isotridecyl polyethylene glycol ether with 10 EO, used mainly as an emulsifier for water-based plastisol applications. Moreover, it can be used for other applications like emulsion polymerization and other industrial applications.

Licocare RBW 286 P TP TERRA is a high-performing additive based on renewable, non-food competing feedstock, which provides favorable chemical structure. Licocare RBW 286 P TP TERRA demonstrates high thermal stability, performs as a lubricant and release agent in Polyesters and EMC applications.

Amonill™ is a high-performance ammonia adsorbent produced from premium-quality bentonite, specially developed for use in the poultry industry. Designed to support healthier and more productive chicken farms, Amonill™ effectively reduces ammonia concentration inside poultry farms, which prevents health risks to both birds and workers.

Exolit OP 1262 is a non-halogenated flame retardant based on organic phosphinates and synergists. The product achieves its flame-retardant effect through a combined gas phase and condensed phase mode of action. The thermoplastic polymer with Exolit OP 1262 forms on exposure to flame a stable char at the surface acting as a barrier. The protective layer provides an heat-insulating effect, reduces oxygen access and prevents dripping of molten polymer. Exolit OP 1262 is a white powder.

Polyglykol 3350 PSRJ is a sprayed PEG API grade powder product, with a coarse particle size distribution. It is produced under ICH Q7 conditions and GMP certified by the German authorities. The powder form supports the homogeneous mixing with other powder materials within production resulting into powder mixtures with improved flowability. It is followed the Japanese Pharmacopoeia monograph "Macrogol 4000" and registered with a J-MF in Japan (see below). With its low Ethylene oxide and Dioxane specification limits, special formulation requirements could be fulfilled.

Polyglykol 3350 PSEJ is a sprayed PEG API grade powder product, with a mean particle size distribution. It is produced under ICH Q7 conditions and GMP certified by the German authorities. The powder form supports the homogeneous mixing with other powder materials within production resulting into powder mixtures with improved flowability. It is following the Japanese Pharmacopoeia monograph "Macrogol 400" and registered with a J-MF in Japan (see below). With its low Ethylene oxide and Dioxane specification limits, special formulation requirements could be fulfilled.

Polyglykol 3350 PSTJ is a sprayed PEG API grade powder product, with a fine particle size distribution. It is produced under ICH Q7 conditions and GMP certified by the German authorities. The powder form supports the homogeneous mixing with other powder materials within production resulting into powder mixtures with improved flowability. It is following the Japanese Pharmacopoeia monograph "Macrogol 4000" and registered with a J-MF in Japan (see below). With its low Ethylene oxide and Dioxane specification limits, special formulation requirements could be fulfilled.

Safebrake™ R335 racing fluid offers the highest DOT4 performance with maximum temperature resistance.

Safebrake™ R310 is a brake fluid with enhanced formulation stability against borate precipitation for long-term use.

VitiPure™ 400 LS is a high-quality liquid polyethylene glycol (PEG) excipient manufactured under Cosmetic GMP conditions. VitiPure™ 400 LS is particularly suited for oral care products where controlled sodium and potassium levels are essential. Specification reflects the Ph. Eur. and USP monographs' specification limits.

Genamin NT 018-ID is a cost-effective pH neutralizer blend that exhibits minimal yellowing compared to other commonly-available amines and amino alcohols. When incorporated into paint formulations, it maintains stability without negatively impacting viscosity or color strength during storage. Furthermore, Genamin NT 018 functions as an effective co-dispersant, enhancing color strength in paints. The dosage recommendation (in supply form) is 0.1% - 03%.

Exolit AP 862 (TP) is a non-halogenated flame retardant based on modified encapsulated ammonium polyphosphate, which develops its effectiveness through phosphorus/nitrogen synergism. Exolit AP 862 (TP) differs in its mode of action from chlorine- or bromine-containing flame retardants by creating an insulating char. The flame retarded material foams in combination with nitrogen-containing blowing agents on exposure to heat. The carbon foam layer so formed protects the substrate through its heat insulating effect and reduces further oxygen access, thereby reducing heat release, flame spread and smoke release.

Exolit AP 822 (TP) is a non-halogenated flame retardant based on modified ammonium polyphosphate, which develops its effectiveness through phosphorus/nitrogen synergism. Exolit AP 822 (TP) differs in its mode of action from chlorine- or bromine-containing flame retardants by creating an insulating char. The flame retarded material foams in combination with nitrogen-containing blowing agents on exposure to heat. The carbon foam layer so formed protects the substrate through its heat insulating effect and reduces further oxygen access, thereby reducing heat release, flame spread and smoke release.

Hordaphos CC MN is a phosphate ester used as a component for high performance acid cleaning agents. It is suitable for use in the food processing industry, sanitary sector and for railway rolling stock. It is also used in surface technology applications, for example in formulations for rust removers. It provides higher solubility for various salts and oxides than phosphoric acid, helping prevent precipitates. Hordaphos CC MN is effective even in hard water and has low corrosion rates on metallic and non-metallic materials.

Hordaphos 222 is a mono- and diester of phosphoric acid based on long chain alkyl polyethylene glycols. It is used as an EP (extreme pressure) / AW (anti-wear) additive in mineral oils, where it increases lubrication and EP properties. It is also described as an additive for liquid detergents and dry cleaning, with strong dispersing and emulsifying properties, antistatic and softening effects, and suitability for aluminum treatment.

Exolit™ BA 701 (TP) is a SVHC-free blowing agent, specifically designed for use in intumescent coating systems. It acts as gas-releasing component within the intumescent reaction. Upon thermal activation, the product undergoes controlled decomposition, releasing voluminous gases (primarily ammonia and carbon dioxide) that expand the carbonaceous char layer formed by the acid donor and carbon source components present in the intumescent formulation. The protective mechanism is based on several synergistic effects: Char expansion: The released gases cause the forming char layer to expand significantly, creating a highly insulating, low-density foam structure that acts as a physical and thermal barrier between the flame and the underlying substrate Thermal insulation: The expanded intumescent char dramatically reduces heat transfer to the substrate, delaying critical temperature rise Diffusion barrier: The stable foam char limits oxygen supply to the combustion zone and suppresses the release of combustible pyrolysis gases, subsequently reducing heat release Endothermic contribution: The decomposition reaction absorbs energy from the system, further reducing substrate temperature Through this combination of effects, the thermal degradation and structural failure of protected substrates is significantly delayed, providing essential passive fire protection in building and construction applications.

NIPACIDE GSF is a biocidal preparation containing bronopol and isothiazolinones for in-can preservation

Emulsogen M SG Vita is a fatty alcohol polyglycol ether, used as an emulsifier for emulsion polymerization. This product is 100% bio-based with a fully segregated supply chain and a Renewable Carbon Index (RCI) of 100%.

Hostapal ZS liq is a liquid textile auxiliary product composed of fatty alcohol alkoxylates and polyethylene glycols. It is designed to provide superior lubrication and friction reduction, wetting and detergency, and smooth fiber processing with low foaming potential. It is suitable for polypropylene and staple fiber processing across multiple synthetic fiber types.

Hostaphat ACV liq. is a potassium ethyl octyl phosphonate used as an antistatic agent in the textile processing and plastic processing industries.

Genagen HSGV solid is a fatty acid polyglycol ester used as an emulsifier in spin finish formulations. It is a solid wax with light yellow color and aromatic odor, providing high-temperature stability above 200°C and thickening properties. It is designed for high-temperature polyester processing and high-speed spinning applications.

Genagen V 5066 liq is a capped fatty acid oxalkylate used as an emulsifier in spin finish formulations for synthetic fiber manufacturing. It provides minimal foam generation, good oil solubility, and is ideal for jet-type spin finish application systems, particularly in polypropylene fiber processing with low-foam requirements.

Derived from microalgae through advanced blue biotechnology, AlgaSurge™ is a highly purified sulfated polysaccharide (SP) hydrogel that biomimics HA's benefits and also serves as a botanical source of PDRN without the limitations.

Hordaphos MDB is a multi-functional additive acting as a wetting and dispersing agent that can be used in various applications, especially in printing inks, paints and coatings.

Licocene PP 2502 GR TERRA ISCC Plus is a low crystalline metallocene-technology based propylene-ethylene copolymer made from mass-balanced certified renewable propylene and ethylene.

Dispersogen™ PS 80 is a nonionic polymeric dispersing agent with an innovative star-shaped molecular design for water-based Suspension Concentrates or Suspoemulsions. It enables stable formulations with high loadings and is well suitable for challenging combo formulations involving multiple active ingredients. Its branched block copolymeric structure provides a higher density of surface-affine groups for improved surface coverage and stronger adhesion compared to traditional linear polymeric dispersants.

Highly concentrated wetting agent, detergents and soaping agent for textile and natural wool

Bentoseed™ is a line of powdered mineral solutions developed to optimize seed coating, encrusting, and pelleting processes. Based on minerals with high plasticity and absorbent properties, Bentoseed™ products promote efficient agglomeration and deliver high-quality, uniform coatings — ensuring consistent seed performance, improved handling, and support for early plant development. A key advantage of Bentoseed™ technology is its ability to enable effective seed coating without the need for additional synthetic additives, reducing the use of water, graphite, glues, and organic polymers while simplifying the overall coating process.

Exolit AP 762 (TP) is a non-halogenated flame retardant based on ammonium polyphosphate, which develops its effectiveness through phosphorus/nitrogen synergism. Exolit AP 762 (TP) differs in its mode of action from chlorine- or bromine-containing flame retardants by achieving its effect through char formation. In the event of fire, thermal decomposition of the flame retardant leads to the formation of a compact, thermally stable carbon layer (char layer) on the substrate surface. This protective layer acts as a physical barrier between the heat source and the underlying substrate. The protective mechanism is based on several synergistic effects: Thermal insulation: The char layer significantly reduces heat transfer to the substrate Diffusion barrier: The carbon layer limits oxygen supply to the combustion zone and reduces the release of combustible pyrolysis products from the substrate Endothermic reaction: The chemical transformation of the flame retardant withdraws energy from the system and lowers the substrate temperature Through this combination, thermal degradation of the substrate material is delayed, flame propagation is inhibited, and the structural integrity of the material is prolonged in the event of fire.

Prevol T 510 is used as raw material for foam control agents, as low foaming wetting agent and emulsifier for industrial applications. It is used as compound in antifoaming agents and as emulsifier for low foaming wetting agents in industrial applications. For instance, this is used in liquid building products, e.g. concrete plasticizers, screeds, putties, adhesives and sealants.

Prevol T 936 is used as raw material for foam control agents, as low foaming wetting agent and emulsifier for industrial applications. It is used as compound in antifoaming agents and as emulsifier for low foaming wetting agents in construction and industrial applications.

Genapol 2222 is an alkyl polyglykol ether used as a low foaming wetting agent for industrial applications such as metal cleaners, emulsions, antifoaming agents, and other coatings applications.

Bentomix™ AF is a product based on activated sodium bentonite — a mineral with exceptional binding, swelling, and ion exchange properties — specially formulated for applications in coated and encapsulated fertilizer formulations. Unlike conventional binders or coating agents, Bentomix™ AF combines multiple functional roles in a single mineral solution: it improves granule integrity, enhances nutrient distribution, and provides mechanical and thermal resistance throughout storage, transportation, and application. Its high cation exchange capacity (CEC) and large surface area make it a technically superior choice for formulators who need reliable performance in demanding agronomic and logistical conditions.

Hordaphos MDGB is an effective corrosion inhibitor for acidic aqueous systems, such as cleaners for the food processing industry. It works on common metal surfaces and reduces the corrosivity of various acids.

Hordaphos CC MN is a highly effective base component for acidic cleaners, delivering powerful cleaning performance, superior limescale-dissolving power, and efficient removal of mineral, oxidation, and corrosion deposits across sanitation, automotive, and food processing industries. Its unique formula ensures low corrosion on metals, excellent performance in hard water, low foaming, and easy formulation thanks to good wetting properties and full miscibility with water and polar solvents.

Hordaphos MOB is a multifunctional product with strong acidic properties. It is primarily used in the coatings industry, where it cleans and prepares metal surfaces, improves paint adhesion, and acts as a hardener in acid-curing paint systems. Beyond paints, it also finds its use in printing inks, antistatic applications, and as a dispersing and rinsing agent.

Hordaphos CC MS is recommended as a base component for acidic cleaners in the sanitary, automotive, and food processing industries. It delivers superior cleaning power, effectively dissolving limescale, rust, and mineral deposits even in hard water, while ensuring low corrosion rates on both metallic and non-metallic materials. Easy to formulate, low foaming, and stable down to -30°C, it is a reliable and versatile solution for industrial acidic cleaning applications.

Hordaphos 222 exhibits excellent dispersing properties for solid particles and can be used in cleaning agents, as EP additive for metal working fluids and as dispersing agent in pigment preparations. It shows a good antistatic and softening effect on laundry.

Genapol EP 2584 is a oxo-alcohol alkoxylate with 4 PO and 8 EO used as a low foaming wetting agent for industrial cleaning formulations.

Prevol T 22 is used as low foaming raw material and base oil for the formulation of foam control agents. It could also be used as textiles auxiliary.

Genapol EP 2564 is a oxo-alcohol alkoxylate with 4 PO and 6 EO used as a low foaming wetting agent for industrial cleaning formulations.

Silicone-free polymeric defoamer used in surfactant concentrate, for wastewater treatment or in cleaning formulations

Genapol EP 2424 is a fatty alcohol alkoxylate is a low foaming surfactant used primarily in the metal working industry for metal cleaning processing. It is not corrosive to metals.

Silicone-free defoamer with recommended use in wastewater treatment, cleaning formulations, surfactant concentrates or industrial sprinkler systems

FOAMTREAT 19302 is a high-performance, non-PFAS, silicone-based antifoaming agent formulated in an organic solvent. Designed for use as a secondary defoamer in both offshore and onshore applications, it delivers effective foam control in crude oils across a broad range of API gravities, including systems susceptible to large, stable foam volumes. Its non-PFAS formulation offers a superior environmental profile, making it a more sustainable choice for foam control operations.

Continuous strip desiccants wound on reels, specifically designed for automated high-speed packaging lines. Desi Pak bentonite clay, Sorb-It silica gel, and Tri-Sorb molecular sieve strips provide targeted solutions for a range of humidity control challenges. Rigorous quality control processes help ensure consistent packet integrity across every reel, with advanced AI-based inspection systems being progressively implemented across our manufacturing network.

Genantin EV-LC is a low conductive EV coolant based on ethylene glycol specifically designed for EVs. Cooling systems are critical to customer peace of mind: maximum equipment lifetime, minimal maintenance, and operational safety. Genantin EV-LC delivers outstanding corrosion protection even when water quality isn't perfect – real-world solutions for real-world conditions. This reliability contributes to dual protection: keeping systems safe while cutting down on maintenance. The product is ready-to-use and also available as concentrate.

TexCare SRN 300 is used in textile finishing process to improve ease of ironing and to improve the removal of oily and fatty stains significantly. The soil release polyester is adsorbed on the hydrophobic fibres and forms a hydrophilic film. This prevents the hydrophobic and oily soils from adhering directly to the fibres and supports the removal in subsequent laundry with fabric cleaners. Furthermore, the affinity of hydrophobic soils for the hydrophilic film is reduced significantly compared to the untreated fibres, making it much easier to remove oily stains from the fabric during subsequent washing.

Silicate free peroxide stabilizer for bleaching bath applications of cotton & blended fabrics

Economical wetting agent and detergents for scouring of cotton & blends.

Scouring agent for natural wool & soaping agent for reactive & direct dyed textile.

Crypto anionic surfactant for scouring of grey fabrics

Hostapon CT solid is a salt-free taurate surfactant that elevates cosmetic applications with its exceptional foaming properties and silky lubricity. It's the ultimate foam booster for crafting luxurious cream-typeshampoos, delivering cloud-likesoftness and mildness that transforms everyday cleansing into a premium experience.

Dispersogen™ SC Plus is a performance blend for SC crop protection formulations. It is suitable for multi-active applications and includes wetting, dispersing and anti-freeze properties.

Genapol EC 50 is an excellent low foaming surfactant and rinse aid for multifunctional automatic dishwashing detergents. It provides great overall rinse performance and superior drying performance also on plastic items.

Clariant Oil Services’ HOSTADRILL technologies are HT/HP fluid loss additives for drilling applications that improve operations and achieve optimum results.

Clariant Oil Services’ ICETREAT flow assurance technologies offer specially-formulated solutions that prevent blockages formed by water and hydrates in gas wells and gas flow lines.

Clariant Oil Services’ HOSTAMER technologies are HT/HP fluid loss additives for cementing applications.

Clariant Oil Services’ LIBERATE near wellbore remediation technology is an integrated system of solutions that focuses on damage removal in the wellbore region that negatively affects the normal oil production curve. Find more information on the Oil Innovation page.

Clariant Oil Services’ PHASETREAT demulsifier technology has successfully separated the world’s oil from water for more than 50 years—from the lightest sweet crudes to the heaviest sour crudes, from Alaska to the Far East—and in compliance with some of the most stringent environmental regulations. For more details see our Innovation Spotlight video.

Clariant Oil Services’ HYTREAT hydrate management and control technologies are designed to provide hydrate control for the most severe conditions of sub-cooling.

Clariant Oil Services’SURFTREAT range of technologies comprises product functionalities such as cleaning, detergency, wettability modification and other general surfactant type applications.

Clariant Oil Services’ WellBoost chemical foamer technologies for gas well deliquification are custom-designed, cost- effective solutions that help maximize gas production and increase profits.

The growing scarcity, and rising cost, of freshwater, has challenged the oil industry to find new, innovative, chemical solutions to control halite buildup. Clariant Oil Services developed the SCALETREAT HL product line to address this evolving industry challenge. Application of SCALETREAT HL reduces freshwater consumption between 74% and 95%. Our product also eliminates the need for a supplemental scale inhibitor as it is effective against halite and many types of carbonate and sulfate levels. Additionally, treatment rates of SCALETREAT HL are 50% less than those of traditional halite inhibitors. The most common strategy to control halite is fresh water addition upstream of deposition to dilute the problem. While chemical inhibitors for halite control have existed for some years, they usually required high concentrations of environmentally undesirable products. New production in the US, such as in the Bakken and the deepwater Gulf of Mexico, has resulted in more production of saline fluids. The Bakken region has already had a profound impact. Application of SCALETREAT HL at 80ppm was able to reduce water consumption to 10% of that of the incumbent strategy with a return of investment of nearly 1,000%.

Clariant Oil Services’ PRESERVAN line of hydrotest technologies delivers exemplary performance in a variety of easy-to-use, flexible options to meet all of your pipeline and process preservation needs.

Clariant Oil Services’ SCAVTREAT scavengers are used to control hydrogen sulfide, iron sulfide, sulfide scale and oxygen.

Clariant Oil Services’ WAXTREAT paraffin control technologies were designed to prevent and treat paraffin build-up in order to improve flow and increase production.

Clariant Oil Services’ BIOTREAT bacteria control technologies prevent microbiological-induced corrosion, system biomass fouling, process plugging and reservoir and process H2S production, as well as controls iron sulfide deposition.

Clariant Oil Services’ line of defoamers and anti-foam technologies provides foam management products for both oil- and aqueous-based fluids.

Polyglykol ML 2400 is a polyglycol methallyl ether which can be polymerized directly.

Clariant Oil Services’ FLOTREAT range of downhole treatments removes and prevents asphaltene deposits and resolves emulsions that have formed in the near-wellbore.

Clariant Oil Services’ FLOCTREAT water clarification technologies were designed to remove contaminants of residual oil and solids in produced water, while meeting regulatory requirements.

Clariant Oil Services’ CORRTREAT corrosion inhibitors were designed to prevent and reduce corrosion.

Clariant Oil Services’ DISSOLVAN demulsifier base chemistry technology has been used in finished demulsifier products to successfully separate the world’s oil from water for more than 50 years—from the lightest sweet crudes to the heaviest sour crudes, from Alaska to the Far East—and in compliance with some of the most stringent environmental regulations.

GlucoPure Deg perfectly combines sustainability and performance for Hand Dishwashing Liquid Detergents. The mild sugar surfactant provides a superior foaming profile and outstanding ecological profile. Therefore it is especially suitable for the use as co-surfactant in natural, mild and ecofriendly hand dishwashing detergents. Due to its high active level and water-free formulation it is the perfect choice for concentrated formulation in pouches, pads or for self-dilution.

GlucoPure Wet is a mild sugar surfactant with excellent cleaning and wetting ability. It is designed for the use in hard surface cleaners and especially suitable for bathroom cleaners with a mild pH value and all purpose cleaners. GlucoPure Wet combines fast soap scum removal and mildness to plastic or metal materials.

Excellent low foaming surfactant and rinse aid for automatic dishwashing liquids, tabs and rinses.

GlucoPure Foam perfectly combines sustainability and performance for Hand Dishwashing Liquid Detergents. The mild sugar surfactant provides a superior foaming profile and outstanding ecological profile. Therefore it is especially suitable for the use as co-surfactant in natural, mild and ecofriendly hand dishwashing detergents. GlucoPure Foam is based on coconut oil and is therefore suitable for palm-free detergents.

Polyglykol A 2400 C is a polyglycol allyether which can be directly polymerized.

TONSIL ™ CO series catalysts have been establishing an outstanding status around the world. The Tonsil series has multiple products for each process to meet the different requirements in terms of activity and selectivity. Generally, Tonsil catalysts contain less side reaction active sites and have high surface area and superior pore properties. Those properties ensure the long cycle time of Tonsil catalysts, thus reduce the number of change outs and operation cost, increase the operation efficiency and reduce energy consumption. Clariant has years of experience in aromatics treatment and is committed to continuously improve these materials to adapt them to the increasing requirements of thepetrochemical industry.

Clariant’s CPA series is an advanced catalytic solution for the production of BTX aromatics and high-octane gasoline from light olefins and paraffins, such as LPF and gas condensates. Our high-performance catalysts are designed to maximize yields, thus enhancing plant profitability. Thanks to their outstanding thermo-mechanical stability and excellent regenerability, the catalysts ensure a long lifetime of reliable, cost-effective production. We offer CPA catalysts for both fixed-bed and moving-bed process designs. Depending on the plant’s feedstock composition, customers can choose from a variety of olefin and paraffin aromatization catalysts with tailored activity and selectivity.

The StyroMax™ series is designed to promote the dehydrogenation of ethylbenzene to styrene monomer far more efficiently than many other state-of-the-art catalysts. Thanks to their outstanding selectivity and high activity, the catalysts help to maximize styrene yield while minimizing by-product formation. Producers also benefit from reliable operation with low deactivation rates, low pressure drop, and high resistance to coke formation or accidental poisoning. A complete range of StyroMax catalysts are available for both standard and ultra-low steam-to-oil (SOR) or steam-to-hydrocarbon (SHR) ratios. Because they require less steam for styrene production, the latter versions reduce energy costs, and allow more sustainable operation. Learn more about our Styrene Catalyst Porftolio

Clariant’s highly selective MTPROP™ catalyst series is specially designed for the Methanol to Propylene (Lurgi MTP™) technology jointly developed by Air Liquide and Clariant. Air Liquide’s Lurgi MTP™ process combines an efficient reactor system with Clariant's highly selective MTPROP zeolite-based catalysts, to convert methanol to propylene in the presence of steam. An industry benchmark for MTP applications, the MTPROP catalyst series helps cover the growing demand for on-purpose propylene production derived from flexible C1-Cx feedstock. The technology and catalysts have been successfully proven at several commercial plants throughout China.

Litol™ is a high-performance catalyst for conversion of light oil, a by-product from the coking of coal, into high-purity benzene. This complex, single-step process achieves desulfurization, removal of paraffins and naphthenes, and saturation of unsaturated compounds, in addition to dealkylation and dehydrogenation. The catalyst operates at lower temperatures than thermal processes, and delivers excellent product purity (benzene content in the end-product exceeding 99.93 wt%). Hence, petrochemical producers attain maximum productivity at minimum costs.Our complete range of catalysts for dehydrogenation and dealkylation of aromatic hydrocarbons to benzene includes:Litol™ for light oil to benzeneDetol™ for toluene to benzenePyrotol™ for pyrolysis petrol to benzeneLitol, Detol and Pyrotol technologies are exclusively licensed by our process partner, Lummus Technology, while the catalysts are solely produced and supplied by Clariant.

Clariant’s CATOFIN catalyst is tailor-made for the production of on-purpose propylene via CATOFIN technology. Based on the Houdry process of catalytic cracking, CATOFIN technology and catalysts allow highly efficient dehydrogenation of isobutane, n-butane, or propane to isobutylene, n-butenes, or propylene, respectively. The reliable, proven process uses fixed-bed reactors and operates at optimum pressure and temperature to maximize catalytic dehydrogenation of alkanes for high yields of alkenes at low costs. In operation at numerous propylene facilities worldwide, CATOFIN technology is exclusively licensed by our process partner, Lummus Technology, while the catalysts are solely produced and supplied by Clariant. Learn more about our high performance CATOFIN catalysts

Detol™ is a high-performance catalyst designed for selective dehydrogenation and dealkylation of toluene to benzene. Thanks to the catalyst’s high aromatic selectivity, petrochemical producers benefit from excellent product purity, with benzene content in the end-product exceeding 99.93 wt%. Detol is designed for use in an economical, single-step process, which eliminates the need for separate hydrotreating to reduce olefin or sulfur content in feedstock. Our complete range of catalysts for dehydrogenation and dealkylation of aromatic hydrocarbons to benzene includes:Detol™ for toluene to benzene Litol™ for light oil to benzene Pyrotol™ for pyrolysis petrol to benzeneDetol, Litol and Pyrotol technologies are exclusively licensed by our process partner, Lummus Technology, while the catalysts are solely produced and supplied by Clariant.

OleMax™ 100 series catalysts are designed for selective hydrogenation of acetylene and dienes in the purification refinery offgas streams for high value olefins recovery. While they convert acetylene and dienes to olefins in the stream, the catalysts effectively remove other contaminants such as MAPD (methyl acetylene/propadiene), oxygen, NOx (nitrogen oxides), and heavy metals. This enables the recovery of ethylene, propylene, and hydrogen from FCC off-gas streams in one single reactor. A range of catalysts types are offered to suit a variety of plant design conditions.

OleMax™ 200 series catalysts are developed for selective hydrogenation of acetylene to ethylene in tail-end process configurations. Thanks to their outstanding performance, excellent stability and long operating cycles, the catalysts help producers increase ethylene yield and total profitability while reducing operating costs. The promoted-palladium catalysts have a long record of performance at ethylene plants throughout the world, where they are used for a variety of feedstocks. We offer a choice of catalysts in different shapes and sizes, which are tailored to meet the unique needs of each operating plant.

OxyMax™ is a series of oxychlorination catalysts designed for efficient production of ethylene dichloride (EDC) from ethylene. The range offers excellent stability, selectivity and activity during operation, to maximize ethylene dichloride yields and plant profitability. Producers also benefit from greater flexibility, as the catalysts allow oxychlorination in fluid-bed reactors operated with either air or oxygen, and work under a wide range of operating conditions, such as different feed gas compositions, temperatures, or plant capacities. We offer a broad range of catalysts to suit different plant requirements and processes:OxyMax™ A: for all standard fluid-bed applications OxyMax™ B: for medium and high temperatures (225-240°C)OxyMax™ V: provides maximum performance in fluid-bed reactors OxyMax™ M: for fluid-bed reactors using Mitsui Chemicals technology OxyMax™ MW: make-up catalyst for reactors using OxyChem’s Catoxid technology OxyMax™ S & OxyMax™ BS: make-up catalysts for units with high loss of fine particles; developed to increase activity and restore fines

Pyrotol™ is a catalyst developed for selective dehydrogenation and dealkylation of pyrolysis gas (pygas) to high-purity benzene. The Pyrotol process converts the C6 to C9 fraction of pyrolysis liquids obtained as a by-product of ethylene production. Compared to the Litol™ process, Pyrotol achieves more hydrocracking of non-aromatics, and a comparable amount of hydrodealkylation, but offers less desulfurization. The catalyst provides high activity and selectivity at lower operating temperatures than thermal processes, thereby supporting the operational and commercial success of petrochemical producers. Our complete range of catalysts for dehydrogenation and dealkylation of aromatic hydrocarbons to benzene includes:Pyrotol™ for pyrolysis petrol to benzene Litol™ for light oil to benzene Detol™ for toluene to benzene Pyrotol, Litol and Detol technologies are exclusively licensed by our process partner, Lummus Technology, while the catalysts are solely produced and supplied by Clariant.

Hostastat FE 2 is a fatty acid ester which provides highly effective internal antistatic properties to thermoplastic polymers.

Hostastat FE 20 is a fatty acid ester which provides highly effective internal antistatic properties to thermoplastic polymers.

Hostanox O 3 pills is a highly efficient phenolic antioxidant with high resistance against hydrolysis, providing long term heat stabilization to polyolefins and polyamide especially for applications where the final article comes in contact with extractive media such as water, fat etc.

Hostastat FA 14 is an ethoxylated alkyl amine which provides highly effective internal antistatic effect to thermoplastic polymers.

Hostastat FA 24 is an ethoxylated alkyl amine which provides highly effective internal antistatic properties to thermoplastic polymers.

AddWorks AGC 102 G is a specific light stabilization system to protect greenhouse film, extend its service life and optimize the light transmission required to grow UV sensitive crops.

Hostagliss NDC is a polyol ester and used as synthetic base fluid in rolling oils or lubricating component for cutting & grinding fluids.

Hostagliss EHS is a polyol ester and used as synthetic base fluid and lubricating component for rolling fluids, cutting & forming fluids and fire resistant hydraulic fluids.

Hostagliss EFP is a polyol ester and used as synthetic base fluid in rolling oils or lubricating component for cutting & grinding fluids.

Hostagliss L6 is a complex ester and used as lubricity improver for milky, semisynthetic and neat oil metalworking fluids. Furthermore it is used as synthetic base fluid for rolling emulsions.

Hordaphos 1306 is an efficient EP/AW additive with emulsification as well as corrosion inhibiting properties. It is used for metal working fluids (emulsions, semi-synthetic) as well as for rolling emulsions and fire-resistant hydraulic fluids.

Hostagliss L2 is a complex ester and used as lubricity improver for milky, semisynthetic and neat oil metalworking fluids. Furthermore it is used as synthetic base fluid for rolling emulsions.

Polyglykol B01/20 is a polyalkylene glycol (PAG) to be used as synthetic base fluid in high performance lubricants with low friction coefficients, excellent wear properties and good thermal stability.

Polyglykol B01/80 is a polyalkylene glycol (PAG) to be used as synthetic base fluid for high performance lubricants with low friction coefficients, excellent wear properties and good thermal stability.

Polyglykol B01/40 is a polyalkylene glycol (PAG) to be used as synthetic base fluid for high performance lubricants with low friction coefficients, excellent wear properties and good thermal stability.

Polyglykol PE-K 270 is a high performance lubricant especially designed for the use in high pressure production processes of low density polyethylene (LDPE). It is a polyalkylene glycol (EO/PO random copolymer) with an excellent intrinsic lubricity and a high viscosity index, showing a favorable pressure-viscosity relationship.

Polyglykol D21/100 is a polyalkylene glycol (PAG) to be used as synthetic base fluid in high performance lubricants with low friction coefficients, excellent wear properties and good thermal stability.

Polyglykol B11/50 is a polyalkylene glycol (PAG) to be used as synthetic base fluid in high performance lubricants with low friction coefficients, excellent wear properties and good thermal stability.

Polyglykol B11/30 is a biodegradable polyalkylene glycol (PAG) to be used as synthetic base fluid for high performance lubricants with high viscosity index, excellent wear properties and good thermal stability.

Polyglykol B01/150 is a polyalkylene glycol (PAG) to be used as synthetic base fluid in high performance lubricants with low friction coefficients, excellent wear properties and good thermal stability.

Polyglykol B01/120 is a polyalkylene glycol (PAG) to be used as synthetic base fluid for high performance lubricants with low friction coefficients, excellent wear properties and good thermal stability.

Polyglykol B01/240 is a polyalkylene glycol (PAG) to be used as synthetic base fluid for high performance lubricants with low friction coefficients, excellent wear properties and good thermal stability.

Polyglykol B01/100 is a polyalkylene glycol (PAG) to be used as synthetic base fluid in high performance lubricants with low friction coefficients, excellent wear properties and good thermal stability.

Hostagliss TPO-V 68 is a polyol ester and used as synthetic base fluid and lubricating component for rolling fluids, cutting & forming fluids and fire resistant hydraulic fluids.

Hostagliss TPO-V is a polyol ester and used as synthetic base fluid and lubricating component for rolling fluids, cutting & forming fluids and fire resistant hydraulic fluids.

Plantasens Cosmetic Wax A4 is a natural structuring agent derived from non-GMO soybean oil. It presents to formulators a fully natural and cost-effective solution to stabilize and/or increase formulation viscosity and is ideal for synthetic-, petroleum- and animal-free concepts

Lubricant and dispersing aid for plastics, especially for engineering plastics.

Sapogenat™ T products are the best- performing NPE alternatives. Besides excellent emulsification power, these surfactants are also good wetters, increasing pesticide efficacy in foliar application.

Synergen™ GL 5 is a polyglycerol ester-based adjuvant with unique combination of proven adjuvant performance and dispersing power. It is label-free, derived from renewable resources and can be used in a wide range of formulation types.

Polyglykol P41/12000 M80 is a water-soluble polyalkylene glycol (PAG) to be used as thickener in fire-resistant hydraulic fluids and in water-based quenchants.

Sapogenat™ T products are the best- performing NPE alternatives. Besides excellent emulsification power, these surfactants are also good wetters, increasing pesticide efficacy in foliar application.

Polyglykol M 3000 is a linear, mono hydroxy-functional polyethylene glycol monomethyl ether (M-PEG).

Synergen G 480 is cost effective and environmentally friendly adjuvant for TAE-free, high Load MIPA Glyphosate formulations.

Polyglykol M 2000 is a linear, mono hydroxy-functional polyethylene glycol monomethyl ether (M-PEG).

Polyglykol D21/700 is a polyalkylene glycol (PAG) to be used as synthetic base fluid in high performance lubricants with low friction coefficients, excellent wear properties and good thermal stability.

Synergen™ GU is a universal and cost-efficient Adjuvant for glyphosate formulations.

Polyglykol MA 750 is a linear, mono hydroxy-functional polyethylene glycol monomethyl ether (M-PEG) that is completely water soluble. Polyglykol MA 750 is esterified with methacrylic acid to yield the corresponding polyglycol mono methacrylates which are used for the polymerization of polycarboxylate superplasticizers.

Polyglykol D21/220 is a polyalkylene glycol (PAG) to be used as synthetic base fluid in high performance lubricants with low friction coefficients, excellent wear properties and good thermal stability.

Polyglykol 6000 FL is a polyethylene glycol with a mean molecular weight of 6000 g/mol. Product supplied in melt form, ready for immediate use in high-temperature demanding processes, such as making rheology modifiers (HEUR thickeners).

Sapogenat™ T products are the best- performing NPE alternatives. Besides excellent emulsification power, these surfactants are also good wetters, increasing pesticide efficacy in foliar application.

Polyglykol M 350 is a linear, mono hydroxy-functional polyethylene glycol monomethyl ether (M-PEG) that is completely water soluble. Polyglykol M 350 is esterified with methacrylic acid to yield the corresponding polyglycol mono methacrylates which are used for the polymerization of polycarboxylate superplasticizers.

Hostapur DTC Hi Conc is an ether carboxylic acid with excellent emulsification and dispersing properties. It is used for metal working fluids, fire resistant hydraulic fluids (HFA-S) and rolling emulsions. The product is extremely stable against electrolyte and hard water. Furthermore Hostapur DTC Hi Conc shows outstanding lime soap dispersing power, being able to disperse large quantities of calcium oleate or tallate.

Sapogenat™ T products are the best- performing NPE alternatives. Besides excellent emulsification power, these surfactants are also good wetters, increasing pesticide efficacy in foliar application.

Polyglykol 9000 FL is a polyethylene glycol with a mean molecular weight of 9000 g/mol. Product supplied in melt form.

Polyglykol M 500 PU is a linear, mono hydroxy-functional polyethylene glycol monomethyl ether (M-PEG) that is completely water soluble. Polyglykol M 2000 FL is esterified with methacrylic acid to yield the corresponding polyglycol mono methacrylates which are used for the polymerization of polycarboxylate superplasticizers. Polyglykol M 500 PU is produced for polyurethane applications and offers low alkali and low water content.

Polyglykol P41/3000 is a water-soluble polyalkylene glycol (PAG) to be used as thickener in fire-resistant hydraulic fluids and in water-based quenchants.

Polyglykol D21/300 is a polyalkylene glycol (PAG) to be used as synthetic base fluid in high performance lubricants with low friction coefficients, excellent wear properties and good thermal stability.

Active Bleach ACL is a bleach activator used as a disinfectant for surgery materials.

Sapogenat™ T products are the best- performing NPE alternatives. Besides excellent emulsification power, these surfactants are also good wetters, increasing pesticide efficacy in foliar application.

Sapogenat™ T products are the best- performing NPE alternatives. Besides excellent emulsification power, these surfactants are also good wetters, increasing pesticide efficacy in foliar application.

Nipacide MBM is a low toxicity biocide developed for use in metal working concentrates. Nipacide MBM is effective against a wide range of microorganisms including gram positive and gram negative bacteria, yeast and fungi. Microorganisms grow at a rapid rate and without use of the correct biocide, numbers can increase dramatically.

Polyglykol B11/100 is a polyalkylene glycol (PAG) to be used as synthetic base fluid in high performance lubricants with low friction coefficients, excellent wear properties and good thermal stability.

Sapogenat™ T products are the best- performing NPE alternatives. Besides excellent emulsification power, these surfactants are also good wetters, increasing pesticide efficacy in foliar application.

Nipagin M Sodium is a highly water-soluble short-chain paraben in sodium salt form. The major benefit offered by the sodium salts is their high solubility in cold water, thereby enabling the introduction of parabens without heating or pre-dissolving in solvents.

Polyglykol D21/150 is a polyalkylene glycol (PAG) to be used as synthetic base fluid in high performance lubricants with low friction coefficients, excellent wear properties and good thermal stability.

Polyglykol D01/240 is a polyalkylene glycol (PAG) to be used as synthetic base fluid in high performance lubricants with low friction coefficients, excellent wear properties and good thermal stability.

Sapogenat™ T products are the best- performing NPE alternatives. Besides excellent emulsification power, these surfactants are also good wetters, increasing pesticide efficacy in foliar application.

Polyglykol M 500 is a linear, mono hydroxy-functional polyethylene glycol monomethyl ether (M-PEG) that is completely water soluble.

Polyglykol M 750 is a linear, mono hydroxy-functional polyethylene glycol monomethyl ether (M-PEG) that is completely water soluble.

Polyglykol B11/70 is a polyalkylene glycol (PAG) to be used as synthetic base fluid in high performance lubricants with low friction coefficients, excellent wear properties and good thermal stability.

Polyglykol D41/200 K is a polyalkylene glycol (PAG) to be used as synthetic base fluid in high performance gear oils with low friction coefficients, excellent wear properties and good thermal stability.

Synergen™ G2D is a cost-efficient and environmentally friendly Adjuvant for TAE-free Glyphosate formulations.

Polyglykol P41/12000 is a water-soluble polyalkylene glycol (PAG) to be used as thickener in fire-resistant hydraulic fluids.

Polyglykol P41/12000 is a water-soluble polyalkylene glycol (PAG) to be used as thickener in fire-resistant hydraulic fluids and in water-based quenchants.

Polyglykol P41/300 is a water-soluble polyalkylene glycol (PAG) to be used as a synthetic base fluid in gear oils and greases, as polymer in water-based quenchants and as thickener in fire-resistant hydraulic fluids.

POLYGLYKOL B11/150 K is a liquid lubricant used in the metal working industry for metal processing.

High foaming primary surfactant for hand dishwashing liquids. Low stickiness to textile fibres; especially for carpet and upholstery cleaners . Low tendency to build up viscosity therefore suitable for use in I&I cleaners .

Synergen™ 9903 is a cost-efficient and environmentally friendly Adjuvant for TAE-free Glyphosate formulations.

Polyglykol 9000 S is a polyethylene glycol with a mean molecular weight of 9000 g/mol. Product supplied in flakes form.

JMAC S 10 is a preservative active with antimicrobial properties that reduces the spread of bacteria over the long term. The attractiveness of JMAC’s antimicrobial protection is reinforced by its low toxicity, non-sensitizing performance and very low environmental impact. JMAC meets Ecolabel standards for use in paints and coatings. Paint and coatings manufacturers benefit from easy and economical formulation. The JMAC biocides are effective at very small ppm addition levels and offer low viscosity liquid dispersion. Safe handling is assured through the non-flammability, non-corrosive nature of JMAC. For In-can preservation, the excellent thermal and pH stability of JMAC biocides means they can be used in a wide range of industrial applications, such as polymer emulsions, paints, sealants and adhesives.

Hordaphos™ 145 is an efficient EP/AW additive with emulsification as well as corrosion inhibiting properties for ferrous metals and aluminium alloys. It is used for metal working fluids (emulsions, semi-synthetic, neat oil), rolling emulsions and fire-resistant hydraulic fluids (HFA-E). To some extent the performance depends on the amine chosen for neutralization and can be boosted by combining Hordaphos™ 145 with esters, especially with TMP-trioleate.

Synergen™ W 06 is an excellent wetting agent to be used in EC or SC formulations or as tank-mix adjuvants to increase wetting of the plant surface. It does not require a hazardous labeling.

Hostapon SCI-85 C is a mild, high-foaming, anionic surfactant suited for use in syndet bars. It is very mild to the skin and eyes and provides a rich and abundant lather with no soap scum due to its hard water tolerance. This product imparts a luxurious, silky skin after-feel and is very easy to handle and use. Product is supplied as flakes.

Cleaner & detergent component, Wetting agent

Genapol XM 060 is a methyl-end-capped ethoxylate based on Genapol X 060 which can enable the formulation of very sensitive active ingredients in non-aqueous formulations like ECs and ODs

Solid nonionic surfactant, suitable for coating of enzymes, bleach activators and extrusion products. Excellent binder for toilet rim blocks and gels.

Hostaphat 1306 is an anionic wetting agent and emulsifier used as an emulsifier in emulsion polymerization, a dispersing agent for pigments in aqueous dispersions, and as a wetting agent and detergent in vehicle and metal cleaning and textile finishing processes.

Hostagliss™ PA 135 is a polar polymer with multiple functional groups exhibiting a high affinity to metal surfaces. Hostagliss™ PA 135 has good lubricity and anti-wear properties and is used as a component for non-water miscible metal working fluids such as cutting oils or deep drawing oils. Other applications are rolling emulsions, gear oils and greases.

Genapol PN 30 is a EO/PO block copolymer and used as a low foaming surfactant and lubricity improver in metal working fluids and metal cleaners. It is stable against hard water. In combination with corrosion inhibitors like Hostacor IT, clear water soluble metal working fluids with good corrosion protecting and lubricating properties are obtained.

Genapol TS Powder has a brilliant pearl lustre effect. It is compatible with anionic, nonionic and amphoteric surfactants. The foaming behavior of surfactants is not effected.

Hostapal BV conc. is used as anionic emulsifier for the emulsion polymerization of acrylate, styrene-acrylate and vinyl acetate dispersions.

Cleaner & detergent component, Wetting agent

Hostapon SCI-85 G is a mild, high-foaming, anionic surfactant suited for use in syndet bars. It is very mild to the skin and eyes and provides a rich and abundant lather with no soap scum due to its hard water tolerance. This product imparts a luxurious, silky skin after-feel and is very easy to handle and use. Product is supplied as granules.

Hostagliss H is a nitrogen containing complex ester and can be used as a lubricity improver for mineral oil-based metalworking fluids.

Solid nonionic surfactant, suitable for coating of enzymes, bleach activators and extrusion products. Excellent binder for toilet rim blocks and gels.

Genapol XM 150 is a methyl-end-capped ethoxylate based on Genapol X 150 which can enable the formulation of very sensitive active ingredients in non-aqueous formulations like ECs and ODs.

Hostagliss™ A is a complex ester and can be used as lubricity improver in rolling emulsions and cutting & forming fluids. Despite its high viscosity, it can be easily incorporated into concentrates for water based emulsions. The product contributes to emulsion stability and corrosion protection when neutralized with alkanolamines.

Hostapon SCI 65 C is a mild, anionic surfactant, which gives a good foam structure and resistance to hard water. Primarily used in syndet bars.

The alkali and alkaline earth salts of Hostagel™ HT 300 are used as gel-forming agents or thickeners for the production of greases for special applications at high and low temperatures, exposure to high pressure, high and low revolutions, aggressive media, etc.The average concentration used is 10 % by weight, calculated on the liquid basestock. These so-called terephthalamate greases have relatively high drop points, very good water stability and low penetration values.Depending on the property and application of the grease, mineral oils as well as synthetic oils such as dicarboxylicacid esters, silicones/siloxanes, polyalkylene glycols, polyalphaolefines, alkyl benzenes and polyalkylene ethers can be used as basestocks.

Hostagliss 1510 is used as lubricity improver in rolling emulsions and cutting & forming fluids. It is a polar polymer of high molecular weight and with multiple functional groups exhibiting a high affinity to metal surfaces. Due to the products high degree of saturation, it shows an excellent oxidative and thermal resistance but also hydrolytical stability.

Hostaphat 1322 is an efficient EP/AW additive with emulsification as well as corrosion inhibiting properties for ferrous metals and aluminum alloys. It is used for metal working fluids (emulsions, semi-synthetic) as well as for rolling emulsions and rolling oils.

Cleaner & detergent component, Wetting agent

Hordaphos MDHX is a phosphate ester (mono- and diester of phosphoric acid) used as an additive in drilling and cutting fluids. It has very high phosphatizing properties and is also used as an extreme pressure/anti-wear additive in mineral oil formulations.

Cleaner & detergent component, wetting agent.

Hostapon SCI-85 P is a mild, high-foaming, anionic surfactant suited for use in syndet bars. It is very mild to the skin and eyes and provides a rich and abundant lather with no soap scum due to its hard water tolerance. This product imparts a luxurious, silky skin after-feel and is very easy to handle and use. Product is supplied as powder.

Hostagliss™ DHSZ is a complex ester and can be used as lubricity improver in rolling emulsions and cutting & forming fluids. Despite its high vicosity, it can be easily incorporated into concentrates for water based emulsions. The product contributes to emulsion stability and corrosion protection when neutralized with alkanolamines.

Hostacor™ IS is a low foaming corrosion inhibitor mainly used in cutting & grinding fluids, in rolling emulsions and water-based hydraulic fluids (HFA-E, HFA-S). It is a solid product and comes in acid form, offering the formulator full flexibility for neutralization. Water-soluble salts of Hostacor™ IS are obtained by neutralization with alkanolamines and aqueous alkali hydroxides. These are used either alone or in combination with other water-soluble corrosion inhibitors or lubricants. Alkanolamine salts derived from Hostacor™ IS are excellent corrosion inhibitors for steel and show very good hard water stability. Hostacor™ IS is compatible with phosphoric acid esters in neutralized form, like Hordaphos MDB. Thus extreme-pressure properties of semi- and full synthetic formulations based on Hostacor IS can be adjusted.

Genapol PS is a EO/PO random polymer and used as a low foaming surfactant and lubricity improver in metal working fluids and metal cleaners. It is stable against hard water. In combination with corrosion inhibitors such as Hostacor IT, clear water soluble metalworking fluids with good lubricating and corrosion protecting properties are obtained.

The Genapol X products combine low-foam emulsification and wetting properties which make them the first choice for many NPE-free formulations as emulsifier, wetting agent and adjuvant.

Solid nonionic surfactant, suitable for coating of enzymes, bleach activators and extrusion products. Excellent binder for toilet rim blocks and gels.

Hostacor™ 3928 is a water-dispersible corrosion inhibitor with emulsifying properties used for metalworking fluids (emulsions, semi-synthetic, synthetic). The product is clearly soluble in water, dispersible in mineral oils and compatible with non / anionic products. Mineral oil based formulations show no gelation tendency, form spontaneously emulsions and are stable in hard water.

Hostagliss™ L4 is a complex ester and used as lubricity improver and water-dispersable corrosion inhibitor for milky, semisynthetic and neat oil metalworking fluids. Furthermore it is used as synthetic base fluid for rolling emulsions. Hostagliss™ L4 is also listed on the “Lubricant Substance Classification list (LuSC)". Thus suitable for lubricants with European Ecolabel certification.

Genapol PMS is a premium opacifying agent. With its brilliant pearl lustre effect, it transforms cosmetic formulations into visually appealing products that can be further enhanced with suitable colorants. Especially suitable for formulations where an elegant, luxurious appearance is desired.

Hostagliss TPO is a synthetic base fluid and lubricating component for rolling oils, cutting & forming fluids and fire resistant hydraulic fluids.

Hostacor™ 2732 is a liquified version of Hostacor™ IS and used as low foaming corrosion inhibitor in cutting & grinding fluids, in rolling emulsions and water-based hydraulic fluids (HFA-E, HFA-S). Hostacor™ 2732 is insoluble in water. Water soluble salts of Hostacor™ 2732 are obtained by neutralization with alkanolamines and hydroxides. These are used alone or in combination with other water soluble corrosion inhibitors or lubricants. Alkanolamine salts derived from Hostacor™ 2732 are excellent corrosion inhibitors for steel and show very good hard water stability.

Hostagliss PTO is a synthetic base fluid and lubricating component for rolling oils, cutting & forming fluids and fire resistant hydraulic fluids.

Emulsogen 3475 is an excellent surfactant based dispersing agent highly stable in the presence of electrolytes and improved emulsification properties. Its appearance is vicious liquid.

Dispersogen™ TP 160 is an excellent dispersing agent based on a polyarylphenyl ether phosphate. It also exhibits good emulsification properties.

Dispersogen™ 1494 liq. is an anionic sulfonated dispersing Agent with no eye-irritancy for SC, SE, and FS formulations. It is provided as an aqueous solution for easier handling..

Emulsogen CNO 080 is a low foaming ether carboxylic acid with excellent emulsification and dispersing properties. It is used for metal working fluids, fire resistant hydraulic fluids (HFA-S) and rolling emulsions. The product is extremely stable against electrolyte and hard water.

Genapol B is a PO/EO/PO block polymer and used as a low foaming surfactant and lubricity improver in metal working fluids and metal cleaners. It is stable against hard water. In combination with corrosion inhibitors such as Hostacor IT, clear water soluble metalworking fluids with good lubricating and corrosion protecting properties are obtained.

Emulsogen™ 5126 MW is an anionic emulsifier for cutting & forming fluids, rolling fluids and fire resistant hydraulic fluids. Furthermore it is a corrosion inhibitor for cutting & forming fluids and rolling fluids.

Emulsogen 3971 is package based on Na/TEA mix salt of a complex amino carboxylic acid/anionic. Its appearance is brownish, clear and oily liquid.

Genagen IS 140 is a fatty acid polyglycid ester based isostearic acid used as an emulsifier in cutting and forming fluids.

Emulsogen COL 020 is a low foaming ether carboxylic acid with excellent emulsification properties.If neutralized with alkanolamines, Emulsogen COL 020 shows good corrosion protection. The product is extremely stable against electrolyte and hard water.

Genamin O 200 is a higher ethoxylated oleyl amine with a lower pour pointt versus the corresponding tallow amine ethoxylate.

Genamin C 100 is an amine ethoxylate based on cocos fatty amine.

Besides its use as an emulsifier, Genapol C 120 shows excellent Adjuvant properties in EC and SC formulations by enhancing performance in foliar applications.

Genamin T 100 is a medium EO range tallow amine ethoxylate and an excellent Adjuvant for glyphosate formulations.

The Genapol O types are alcohol ethoxylates based on a naturally derived fatty alcohol. Besides its use as an emulsifier, Genapol O 150 shows excellent Adjuvant properties in EC and SC formulations.

The Genapol O types are alcohol ethoxylates based on a naturally derived fatty alcohol. Genapol O 109 is a 90% aqueous version of Genapol O 100 for easier handling in SC and FS formulations.

Emulsogen™ EL 400 is a castor oil-based nonionic emulsifier with high emulsification power. The product shows excellent emulsification characteristics for many solvents and is not eye-irritating. It is widely used in different agrochemical formulation types and especially recommended for EC and EW.

Emulsogen™ A is a fatty acid ethoxylate which is used as nonionic emulsifier in metal cutting & grinding fluids (emulsions, semi-synthetic) and rolling emulsions. It is clearly soluble in all kind of mineral oils (naphthenic, paraffinic, hydrocrack) and vegetable oils (e.g. rapeseed).

Emulsogen COL 080 is a low foaming ether carboxylic acid with good emulsification and dispersing properties. It is used for metal working fluids, fire resistant hydraulic fluids (HFA-S) and rolling emulsions. The product is extremely stable against electrolyte and hard water. Furthermore Emulsogen COL 080 shows outstanding lime soap dispersing power, being able to disperse large quantities of calcium oleate or tallate.

Genapol O 020 is a fatty alcohol ethoxylate and used as a nonionic component in emulsifiable metalworking fluids and water-based hydraulic fluids. Because of its low HLB-value of about 5, Genapol O 020 is preferably used as a co-emulsifier for anionic emulsifiers with high HLB values.

Clariant matched pairs comprise different emulsifier blends based on NPE-free products. By combining emulsifier blends in variable ratios, a broad range of EC formulations can be formulated with a small number of raw materials only.

Emulsogen™ TS 100 is a nonionic tristyrylphenol ethoxylate which commonly used as NPE-free emulsifier and dispersing Agent for a wide range of different formulation types.

Genamin C 050 is an amine ethoxylate based on coconut fatty amine. Lower ethoxylated amine ethoxylates are highly compatible with the Glyphosate potassium salt and high-load formulations of Glyphosate.

Besides its use as an emulsifier, Genapol C 100 shows excellent Adjuvant properties in EC and SC formulations by enhancing performance in foliar applications

Emulsogen ClO 050 is an electrolyte and hard water stable surfactant with good lime soap dispersing properties. It is low foaming and can be blended with Emulsogen COL types to give relatively low foaming dispersing / cleaning agents.

Emulsogen™ 4617 is a blend of ether carboxylic acids with excellent emulsification and dispersing properties. It is used for metal working fluids and rolling emulsions. The product is extremely stable against electrolyte and hard water. Furthermore, Emulsogen™ 4617 shows outstanding lime soap dispersing power, being able to disperse large quantities of calcium oleate or tallate.

Emulsogen MT 050 is a nonionic emulsifier based on a fatty acid alkanol amide with low content of acid and amine. Generally it is used for milky and semisynthetic metalworking fluids. Emulsogen MT 050 is highly compatible with anionic and nonionic surfactants. It has a very low foam tendency and provides outstanding lime soap dispersing power, being able to disperse large quantities of calcium oleate or tallate. Furthermore, Emulsogen MT 050 improves lubrication and shows good anti-wear properties.

Emulsogen™ TS 540 is a nonionic tristyrylphenol ethoxylate which is commonly used as NPE-free emulsifier and dispersing agent for a wide range of different formulation types.

Genamin 3920 is as an alkaline component in emulsifiable metalworking fluids, rolling fluids and fire resistant hydraulic fluids. It shows good emulsifying properties and improves the dispersibility and stability of emulsions. Occasionally, Genamin 3920 improves the spontaneity and shortens the emulsifying time considerably. Genamin 3920 is also a suitable additive for an adjustment of the buffering capacity. A neutralisation with suitable fatty acids can be necessary.

Emulsogen™ TS 160 is a nonionic tristyrylphenol ethoxylate which is commonly used as NPE-free emulsifier and dispersing agent for a wide range of different formulation types.

Emulsogen™ 5781 is a polymeric surfactant, particularly recommended to be used as as nonionic emulsifier in rolling emulsions. Emulsogen™ 5781 is a perfect choice to stabilize a wide range of emulsions. The product forms clear solutions in all types of mineral oils, synthetic esters and vegetable oils. Due to its low HLB, Emulsogen™ 5781 does not form self-emulsifying systems.

Emulsogen™ TS 290 is a nonionic tristyrylphenol ethoxylate which is commonly used as NPE-free emulsifier and dispersing agent for a wide range of different formulation types.

Genamin SH 100 D is a primary amine and used as an intermediate for polyurea greases.

Genamin 8 R 100 D is used as an intermediate for polyurea greases. Its appearance is a colourless liquid.

Genapol C 200 is a non ionic surfactant and emulsifier used in crop solution products as well as in industrial and home care products.

Emulsogen™ MS 12 is a fatty alcohol ethoxylate and used an nonionic emulsifier for metalworking fluids (emulsions, semi-synthetic) and water-based fire-resistant hydraulic fluids (HFA-S). Provides excellent emulsification properties and is highly compatible with anionic formulation components. The product offers good lime soap dispersing power, being able to disperse large quantities of calcium oleate and tallate.

Genamin 267 is the standard ready-to-use Adjuvant for Glyphosate 360 g/l a.e. IPA formulations with an excellent cost-performance profile. No addition of solubilizer is necessary.

Emulsogen™ OG is a fatty acid ester and used as co-emulsifier in combination with nonionic emulsifier (e.g. Emulsogen™ M) in for milky and semisynthetic metalworking fluids based on paraffinic mineral oils. Concentrate and emulsion stability are improved by addition of 2–3%. Emulsogen™ OG is used for the manufacture of high viscous to paste-like water-in-oil emulsions based on mineral oils, petroleum, fatty acid esters etc.

Genamin CH 020 is used as an alkaline component in emulsifiable metalworking fluids, rolling fluids, metal cleaners, polymer quenchants and fire resistant hydraulic fluids. It shows good emulsifying properties and improves the dispersibility and stability of emulsions. Occasionally, Genamin CH 020 improves the spontaneity and shortens the emulsifying time considerably. In contrast to other tertiary amines used in water-based formulations, such as triethanolamine, Genamin CH 020 reduces the leaching of heavy metals like cobalt or copper drastically. This is also true for chromium leaching out of "chromated" or "chromatized" steel parts, in particular when coatings are based on Cr(III)-salts.Due to the high boiling point, Genamin CH 020 is a low volatile component which can be used for high temperature operations, e.g. heavy chip removal operations and emulsion cleaners applied at 80 °C or higher.Genamin CH 020 stabilizes emulsions durable and increases their lifetime also under harsh conditions. Genamin CH 020 is also a suitable additive for an adjustment of the buffering capacity. In Asia, the product is available under the name Genamin CH 020 J.

Genapol BA 020 is an ethoxylated alcohol used as an emulsifying, low foaming surfactant in metal cleaning formulations. An aromatic ring is incorporated into the structure, which offers unique emulsification and greater solvency than typical linear or branched alcohol ethoxylates.

Emulsogen™ LP is a fatty alcohol ethoxylate and used as nonionic emulsifier for metalworking fluids (emulsions, semi-synthetic) and water-based fire-resistant hydraulic fluids (HFA-S). It provides excellent emulsification properties and is highly compatible with anionic formulation components. The product has low foaming tendency, is hard water stable and offers good lime soap dispersing power, being able to disperse large quantities of calcium oleate and tallate. Because of its good solubility in most kinds of mineral and vegetable oils, Emulsogen™ LP can also be used as anti-wear additive to improve lubricity.

Emulsogen™ TS 600 is a nonionic tristyrylphenol ethoxylate which is commonly used as NPE-free emulsifier and dispersing agent for a wide range of different formulation types.

Emulsogen™ M is a fatty alcohol ethoxylate and used as nonionic emulsifier for metalworking fluids (emulsions, semi-synthetic), rolling emulsions and water-based fire-resistant hydraulic fluids (HFA-S).It provides excellent emulsification properties and is highly compatible with anionic formulation components. The product has very low foaming tendency, is hard water stable and offers outstanding lime soap dispersing power, being able to disperse large quantities of calcium oleate and tallate. Because of its good solubility in most kinds of mineral and vegetable oils, Emulsogen™ M can also be used as anti-wear additive to improve lubricity.In North America, the product is available under the tradename Emulsogen™ M A.

Emulsogen™ ELO 200 is a fatty acid ethoxylate which is used as nonionic emulsifier in metal cutting & grinding fluids (emulsions, semi-synthetic) and rolling emulsions. Provides excellent emulsification properties in particular for vegetable oils, synthetic esters or combination of these. It dissolves easily in such ester oils to form clear and stable solutions. Emulsogen™ ELO 200 is highly compatible with other formulation components and can also be used for mineral oil based concentrates. Furthermore the product shows outstanding lime soap dispersing power, being able to disperse large quantities of calcium oleate or tallate. Emulsogen™ ELO 200 also acts as anti-wear additives and improves lubricity.

Genapol LA 080 is a readily biodegradable ethoxylate based on naturally derived lauryl alcohol.

Genagen 4296 is a dimethylamide based on naturally derived fatty acids. This versatile water immiscible solvent shows excellent solvent power, prevents crystallization of actives and can be used for various formulation types (EC, EW and DC).

Emulsogen™ V 1816 is an EO/PO block-copolymer with a low HLB which is mainly used as emulsifier or co-emulsifier in EC, ME and OD formulations.

Emulsogen™ COA 070 is a medium foaming ether carboxylic acid with good emulsification and dispersing properties, used for metal working fluids, fire resistant hydraulic fluids (HFA-S) and rolling emulsions. The product is extremely stable against electrolyte and hard water. Furthermore, Emulsogen™ COA 070 shows outstanding lime soap dispersing power, being able to disperse large quantities of calcium oleate or tallate.

Clariant matched pairs comprise different emulsifier blends based on NPE-free products. By combining emulsifier blends in variable ratios, a broad range of EC formulations can be formulated with a small number of raw materials only..

Emulsogen™ ENF is a nonylphenol-free ready-to use package for de-watering fluids, providing wetting agent and corrosion inhibiting properties to the formulation.A special drying process used in metalworking consists in briefly immersing the metal parts in solvents such as white spirit, kerosene or similar hydrocarbons. The rapid separation of the water from the metal surface is effected by a wetting agent. Selected corrosion inhibitors in the wetting agent impart adequate temporary corrosion protection to the metal parts under normal temperature and humidity conditions. The corrosion protection depends on storage and environmental conditions.Emulsogen™ ENF is tailor-made for this application. It is used at a concentration of only 0.6-1.2%. The water adhering to the metal surface is displaced within a few seconds when metal parts are dipped in the dewatering fluid. The metal parts are then effectivly protected against corrosion during storage.

Genapol EGDS is a gentle, sulfate-free opacifying agent. With its elegant pearlescent effect, it enhances the visual appeal of formulations while maintaining mildness. Especially suitable for creating luxurious shampoos, liquid soaps and shower gels that delight consumers with their appearance.

Emulsogen™ T is a emulsifier package for metal working emulsions based on vegetable oils. Emulsogen™ T is tailored for optimum emulsification of most triglycerides.

Emulsogen CLE 070 is an ether carboxylic acid with excellent emulsification and dispersing properties. It is used for metal working fluids, fire resistant hydraulic fluids (HFA-S) and rolling emulsions. The product is extremely stable against electrolyte and hard water. Furthermore Emulsogen CLE 070 shows outstanding lime soap dispersing power, being able to disperse large quantities of calcium oleate or tallate.

Genapol EGL is a concentrate for pearl and silk lustre agents with an opacifying effect used in skin and hair cleansing products.

Plantasens VP 170 is a natural alternative to petrolatum designed to rapidly protect and moisturize the skin, leaving a comforting after feel in all body care applications. The added value of improving shine makes Plantasens VP 170 ideal for makeup and lip care applications

Plantasens VP R15 is a vegetable alternative to petrolatum that is designed to provide deep moisturization and utmost protection for the skin, while allowing it to breathe naturally. It immediately hydrates and protects the skin and provides a smooth skin feel.

Plantasens VL has been developed as an alternative to lanolin. Plantasens VL offers a comparable lanolin feel and sensory with a cosmetic finish.

Red Phosphorus HB 801 (TP) is a stabilized and micro-encapsulated red phosphorus grade. Red Phosphorus HB 801 (TP) is a fine red powder that is insoluble in water and organic solvents.

Nipacide BNPD 20 is an in-can biocide based on Bronopol. Nipacide BNPD 20 is an aqueous solution recommended for preservation of a wide range of applications including Paints, varnishes, adhesives, emulsions (polymers), slurries, metal working fluids and home care products where the protection against bacteria and fungi is required in humid state (in can protection). Nipacide BNPD 20 is especially effective against bacteria including Pseudomonas sp. and sulphate reducing bacteria (SRB).

Nipacide GRTp is an encapsulated biocide for dry-film preservation based on benzilisothiazolinone + iodopropylbutylcarbamate. Nipacide GRTp is a powerful, low toxicity biocide developed for complete dry film and coating materials protection. It is effective against a wide range of fungal and yeast species and exhibits some activity against Gram negative and Gram positives bacteria.

Nipacide CDZ is a dry film fungicide based on Carbendazim, available in powder form. Nipacide CDZ is recommended for a wide range of coating applications including water-based paints and wood coatings. It is effective against a wide range of fungal species, responsible for the discoloration and degradation of surface coatings.

Nipacide BIT 20 is an in-can biocide based on BIT. Nipacide BIT 20 DPG is a glycol based solution; low toxicity biocide developed for the complete in-can protection of water based products. Nipacide BIT 20 DPG is effective against a wide range of microorganisms including gram positive and gram negative bacteria, yeast and fungi. Nipacide BIT 20 DPG can be used over a wide pH and temperature range. Nipacide BIT20 DPG should be the biocide of choice for products with pH >8 and production temperatures of >40 C.

Nipacide DDI is an aqueous dispersion, dry film algaecide based on Diuron. Nipacide DDI is recommended for a wide range of coating applications including water basedpaints and wood coatings. It is effective against a wide range of algal species, responsible for the discoloration and degradation of surface coatings.

Nipacide CO 5 is an aqueous dispersion dry film fungicide based on Carbendazim, and Octyl isothiazolinone. Nipacide CO 5 is recommended for protection of a wide range of coating applications including water based decorative paints, wood stains and colours. It is effective against a wide range of fungal species, responsible for the discoloration and degradation of surface coatings. Nipacide CO 5 can be used over a wide pH and temperature range.

Nipacide CFX 5 is an in-can biocide based on formaldehyde + chloromethyl and methylisothiazolinone. Nipacide CFX 5 is a low toxicity biocide, developed for the complete protection of water based products. Nipacide CFX 5 is effective against bacteria, yeast and fungi. Nipacide CFX 5 is recommended for a wide range of applications including preservation of paints and varnishes, adhesives, emulsions (polymer), cutting fluids, where protection against bacteria and fungi is required in the wet state (In can protection). Nipacide CFX 5 is stable in the temperature range of 5°C to 40 °C and in the range of pH 4 to 10.0.

Nipacide BKX is an in-can biocide based on bronopol + chloromethyl and methylisothiazolinone. Nipacide BKX is a liquid, low toxicity biocide developed for the complete in-can protection of water-based products. Nipacide BKX is effective against a wide range of spoilage organisms and effective over a pH range of 4 to pH 8 and temperature below 40o C.

Nipacide BK is an in-can biocide basen on Hexahydrotriazine (HHT). Nipacide BKI is a water based, liquid biocide specifically developed for the complete in-can microbiological protection of industrial water-based products against bacterial and fungal spoilage in the wet state. Nipacide BKI is effective against a wide range of microorganisms including gram positive and gram negative bacteria, yeast and fungi. It can be used over a pH range 6 - 10 and temperature range up to 60°C.

Nipacide BNPD is an in-can biocide based on Bronopol. Nipacide BNPD is recommended for preservation of a wide range of applications including Paints, varnishes, adhesives, emulsions (polymers), slurries, metal working fluids and home care products where the protection against bacteria and fungi is required in humid state (in can protection). Nipacide BNPD is especially effective against bacteria including Pseudomonas sp. and sulphate reducing bacteria (SRB).

Plantasens Cosmetic Wax A5 is a natural structuring agent derived from non-GMO sunflower oil. It presents to formulators a fully natural and cost-effective solution to stabilize and/or increase formulation viscosity and is ideal for synthetic-, petroleum- and animal-free concepts.

Exolit OP 945 is a white, fine-grained powder based on an organic phosphinate with a D95 of less than 5 µm. The product is not hygroscopic and it is insoluble in water and common organic solvents like acetone, dichloromethane, MEK, toluene. Exolit OP 945 can easily be dispersed in solvents like acetone or MEK. For more details see our Innovation Spotlight video.

Olive Active HP is an unsaponifiable olive oil derivative that prevents the formation of Advanced Glycation Endproducts (AGEs), to delay the apparition of aging signs. It is obtained from upcycled byproduct of olive oil production.

Licocare RBW 300 flakes Vita is a partially saponified wax based on renewable resource. See here for more details about Licocare™ RBW for Plastics and for Coatings and Inks.

Dispersogen LFA is used as anionic emulsifier for the emulsion polymerization of vinyl acetate dispersions. Dispersogen LFA is also suitable for emulsion paints to improve the paint freeze-thaw resistance and to reduce solvent use level in the paint formulation.

Dispersogen LEC is an amphoteric, surfactant based dispersing agent and synergist for water-based and solvent-based pigment preparations based on inorganic pigments.Dispersogen LEC is recommended for use in point-of-sales colorants and concentrates for in-plant tinting in combination with a nonionic dispersing agent, e.g. Dispersogen MT 200. The general dosage recommendation is 4-6% on organic or inorganic pigments.

Licocare RBW 106 flakes Vita is a high polar modified wax based on renewable resource. See here for more details about Licocare™ RBW for Plastics and for Coatings and Inks.

Licocare™ RBW 102 flakes Vita is a medium polar modified wax based on renewable resource. See here for more details about Licocare™ RBW for Plastics and for Coatings and Inks.

Genapol PF 40 is a block copolymer of propylene oxide and ethylene oxide, containing 40% w/w ethylene oxide. It is a low-foaming surfactant with good wetting and dispersing action, used in various industrial applications including detergents, emulsion polymerization, pigment preparations, silicone emulsions, and construction products. It improves latex stability, pigment wetting, and acts as an emulsifier and plasticizer in different formulations.

Genapol X 150 is used as nonionic emulsifier for the emulsion polymerization of monomers like acrylates, styrene-acrylates and vinyl acetate.

Genapol O 080 is a nonionic wetting agent for use as compatibilizer in waterborne high PVC paints, as well as in waterborne low PVC lacquers. The general dosage (supply form) is 0.5-1.0% in emulsion paints and 1.0-1.5% in acrylic lacquers.

Genapol O 100 is a nonionic wetting agent for use as compatibilizer in waterborne high PVC paints, as well as in waterborne and solvent-borne low PVC lacquers. The general dosage (supply form) is 0.5-1.5% in emulsion paints and 1.0-1.5% in acrylic lacquers, and 1.5% in alkyd lacquers.

Genapol PF 80 is a polymerization product of propylene oxide and ethylene oxide used as a wetting agent, emulsifier, and antifoaming agent for construction, detergents, industrial and institutional cleaning, and many industrial applications. Genapol PF 80 is used as nonionic emulsifier for the emulsion polymerization of monomers like acrylates, styrene-acrylates and vinyl acetate. It is also used as a reactant for chemical synthesis of polyesters and polyurethanes.

Hostapur SAS 30 is used as anionic emulsifiers for the emulsion polymerization of styrene-butadiene latex, E-PVC and vinyl-acetate dispersions.

Hostapur OS liq is used as anionic emulsifier in emulsion polymerization of styrene/butadiene latex, E-PVC, acrylate and vinyl-acetate dispersions.

Genapol X 080 is a tridecyl alcohol ethoxylate with 8 EO that functions as a nonionic emulsifier, suitable for use in emulsion polymerization of acrylates, styrene-acrylates, vinyl acetate, styrene-butadiene, and E-PVC. It is also a good wetting agent in adhesives and coatings formulations. Furthermore, it offers broad compatibility with anionic, cationic, and other nonionic surfactants, while maintaining strong resistance to both highly alkaline and acidic environments.

Emulsogen LCN 088 is used as nonionic emulsifier for the emulsion polymerization of E-PVC.

Emulsogen LCN 158 is used as a nonionic emulsifier for emulsion polymerization improving the shear, temperature and electrolyte stability of polymer dispersions. The recommended usage is 2% active based on monomers. In waterborne and solvent-borne lacquers (low PVC), Emulsogen LCN 158 can be used as a compatibilizer to improve tinting strength and to reduce rub-out, water absorption, and haze effects. Dosage recommendation (supply form) in waterborne acrylic lacquers is 1.3-1.9% and in solvent-borne alkyd lacquers 0.33-0.66%.When used during the premixing phase in the production of waterborne emulsion paints (high PVC), Emulsogen LCN 158 also acts as a processing aid and helps to reduce the grinding time by faster deagglomeration of TiO2 and fillers. This is especially of interest in areas of hard water. The general dosage recommendation (supply form) for this purpose is 0.3%.

PREVOL Z-70 is a liquid foam control agent with very low silicone content for adhesives, coatings and inks based on synthetic latex emulsions.PREVOL Z-70 is very effective during the mixing, dispersing and milling processes. Due to its components, it is easily dispersed and acts immediately to release entrapped air in foam bubbles and to prevent undesired foam built-up. It maintains its efficiency during long periods of agitation.The recommended dosage is 2.4-3.2 kg of PREVOL Z-70 for 1000 liters of paint. This amount is sufficient to control the foam efficiently.In adhesives we recommend dosages between 1-2 % of Antimussol Z-70 based on the total latex solids.This defoamer can be used as it is or as a water dispersion.

PREVOL 1030 is a cost-efficient, 100% active, vegetable oil-based defoamer recommended for coatings applications, especially recommended in the manufacture of binders, paints, adhesives and pigment preparations.PREVOL 1030 can be added at any stage of the manufacturing process, and has a rapid foam knockdown and persistent antifoam performance even after long term coating storage. It shows a good compatibility with other components and has no impact on end-product appearance.PREVOL 1030 can be used as such or pre-dispersed in water. For the use as is, the dosage recommendation is 0.2 -0.4% based on the total formulation.

PREVOL 1040 is a cost-efficient, 100% active, vegetable oil-based foam control agent for coatings applications, PREVOL 1040 shows high performance, rapidly repressing foams. It may be added in any production process step and presents antifoam performance even after long periods of storage. It has good compatibility and does not interfere with the final product appearance.The recommended dosage of Antimussol V4 is 0.2 - 0.4% based on total formulation.

PREVOL DF is a cost efficient, 100% active and vegetable oil-based defoamer recommended for all types of waterborne architectural coatings.Typical applications are emulsion paints, paper coatings and water-based pigment preparations.PREVOL DF can be added at any stage of the manufacturing process. It has a rapid foam knockdown and persistent antifoam performance even after long term coating storage.Good compatibility and no impact on coating appearance. PREVOL DF dosage recommendation is 0.2 -0.4% based on the total formulation.

PREVOL P is a cost-efficient, 100% active oil-based defoamer recommended for all types of waterborne architectural coatings.PREVOL P is suitable for all coating types, can be added at any stage of the manufacturing process, and has a rapid foam knockdown andpersistent antifoam performance even after long term coating storage.Good compatibility and no impact on coating appearance.PREVOL P can be used as such or pre-dispersed in water. For the use as is, the dosage recommendation is 0.2 -0.4% based on the totalformulation.

PREVOL NS 22 is a liquid foam control agent for waterborne latex paints, adhesives, architectural paints and coatings. PREVOL NS 22 can be used as such or pre-dispersed in water.Dosage: 0.2 -0.5% based on the total formulation.

Polyglykol 1000 is a polyethylene glycol with a mean molecular weight of 1000 g/mol.

Genamin M 41/2000 is a random EO/PO copolymer end-capped with a primary amino group.

Polyglykol 300 is a polyethylene glycol with a mean molecular weight of 300 g/mol.

Polyglykol 400 is a polyethylene glycol with a mean molecular weight of 400 g/mol.

Polyglykol 200 LVC is a very low-VOC humectant for water-borne pigment preparations with little impact on wet scrub resistance. Polyglykol 200 LVC retards the drying of pigment pastes and forms a soluble film of the pigment preparation. Polyglykol 200 LVC prevents the clogging of the nozzles of tinting systems and metering machines.

Genapol LRO paste is used as anionic emulsifiers for the emulsion polymerization of styrene-butadiene latices, acrylate, styrene-acrylate and vinyl acetate dispersions.

Emulsogen APS 100 is used as emulsifier and comonomer in emulsion polymerization, particularly in the manufacture of acrylate, styrene/acrylate and vinyl acetate emulsions.

Emulsogen LA 083 is used as a anionic emulsifiers for emulsion polymerization of acrylic acid esters, styrene and other monomers.

Genapol LRO liquid is used as anionic emulsifiers for the emulsion polymerization of pure-acrylic, styrene-acrylic and vinyl acetate dispersions

Emulsogen LCA 213 is used as anionic emulsifier for the emulsion polymerization of pure acrylate, styrene acrylate and vinyl acetate dispersions.

Hostavin N 30 pills is an oligomeric hindered amine light stabilizer (HALS), designed for light stabilization of plastic materials. This HALS is characterized by its broad compatibility and excellent resistance to migration.

Hostanox P-EPQ pills is a highly efficient phosphorus based secondary antioxidant, which reduces the thermo-oxidative degradation of polymers and the development of undesired colour (yellowing) during processing. The main advantages of Hostanox P-EPQ pills are its high thermal stability and high solubility in polymeric materials as well as its broad compatibility in coating polymers.

Hostavin N 30 micro pills is an oligomeric hindered amine light stabilizer (HALS), designed for light stabilization of plastic materials. This HALS is characterized by its broad compatibility and excellent resistance to migration.

Hostastat HS 1 pills Zn is an alkane sulfonate which provides highly effective antistatic properties to thermoplastic polymers.

Hostanox P-EPQ powder is a highly efficient phosphorus based secondary antioxidant, which reduces the thermo-oxidative degradation of polymers and the development of undesired colour (yellowing) during processing. The main advantages of Hostanox P-EPQ powder are its high thermal stability and high solubility in polymeric materials as well as its broad compatibility in coating polymers.

Hostanox O 3 powder is a highly efficient phenolic antioxidant with high resistance against hydrolysis, providing long term heat stabilization to polyolefins and polyamide especially for applications where the final article comes in contact with extractive media such as water, fat etc.

Hostastat HS 1 pills is an alkane sulfonate which provides highly effective antistatic properties to thermoplastic polymers.

Velsan AS offers an alternative for preservation. It is a nature-identical, multifunctional fragrance ingredient suitable for natural formulations that efficiently boosts the power of preservatives. This product is typically used at 0.2-0.4% for most cosmetic formulation, and it provides activity against gram positive and gram negative bacteria.

Velsan SC is a powerful synergistic booster for preservation systems. It can reduce the amount of traditional preservative load needed for adequate formulation protection. It is a 100% renewable and readily biodegradable ingredient without any human or environmental hazard label.

Zeliquid LP 2 is compatible with other anionic and nonionic surfactants and resistant to water hardness.

Sensotain PPS 15 is an emollient with excellent spreading and conditioning properties which can act as a solvent.

Nipaguard CG is a preservative blend and provides protection over a wide range of microbial types. Its appearance is a slightly yellow clear liquid.

Hostagel PH1 is a surfactant blend for acidic cleaners, e.g. bath & toilet cleaners. It thickens HCl acid formulations and other acidic cleaners based on e.g. phosphoric, sulfamic and sulfuric acid in the presence of chloride ions. Especially in combination with amine oxides, Hostagel PH1 thickened acidic formulations show a long-term storage stability and low shear dependence.

Polyglykol MA 5000/50 is a mono methacrylic acid ester of the corresponding polyglycol.

Nipacide BIT AS 20 is an in-can biocide based on BIT. Nipacide BIT AS 20 is a stable, free flowing 20% aqueous dispersion of 1,2-benzisothiazolinone and is a low toxicity biocide developed for the complete in-can protection of water based products. Nipacide BIT AS 20 is effective against a wide range of microorganisms including gram positive and gram negative bacteria, yeast and fungi. Nipacide BIT AS 20 should be the biocide of choice for products with pH >8 and production temperatures of >40 C.

Hostaphat OPS 30 is a solubilizer or hydrotope for nonionic detergents in liquid cleaning agents at high pH values and a corrosion inhibitor for aluminium, iron and zinc in alkaline systems.

Nipacide BK is an in-can biocide basen on Hexahydrotriazine (HHT).Nipacide BK is an aqueous based low toxicity biocide developed for the complete in-can protection of water based products. Nipacide BK is effective against a wide range of microorganisms including gram positive and gram negative bacteria, yeast and fungi. Nipacide BK can be used over a wide pH and temperature range.

Hostaphat KW 340 D is a versatile emulsifier suitable for demanding formulations thanks to its strong emulsifying and stabilizing properties. Emulsions with Hostaphat KW 340 D obtain great texture making the ingredient an ideal choice for caring non-greasy formulations

Hostacerin CG is an easy to use O/W emulsion base with excellent skin compatibility.

Drygen P is an antiperspirant active for aerosol spray or stick application.

Nipacide CI 15 is an in-can biocide based on CMIT/MIT. Nipacide CI 15 is a water based biocide, developed for the complete in-can protection of water based products including water based / Latex/PVA adhesives, PVA / acrylic polymer emulsions, water based decorative paints, printing inks, metal working fluids and construction admixtures.

Drygen S is an anhydrous antiperspirant active for several types of antiperspirants.

Drygen LIC is an antiperspirant active especially for roll-on and pump sprays, with improved clarity and lower iron content.

Hostacor™ IT is a pre-neutralized, low foaming corrosion inhibitor mainly used in cutting & grinding fluids, in rolling emulsions and water-based hydraulic fluids (HFA-E, HFA-S). Hostacor™ IT is an excellent corrosion inhibitor for steel and shows very good hard water stability. It can be used alone or in combination with other water-soluble corrosion inhibitors or lubricants.

Nipagin A Sodium is a highly water-soluble short-chain paraben in sodium salt form. The major benefit offered by the sodium salts is their high solubility in cold water, thereby enabling the introduction of parabens without heating or pre-dissolving in solvents.

Hostapon CCG is a mild surfactant with good skin compatibility. It imparts a very pleasant feel on the skin, has excellent biodegradability and is free of preservatives.

Polyglykol M 1000 is a linear, mono hydroxy-functional polyethylene glycol monomethyl ether (M-PEG).

Hostacerin WO is a self emulsifying base for cosmetic water-in-oil emulsions. The emulsions obtained using this product have very good spreading properties on the skin, as well as cold and heat stability. Moreover, soft lustrous creams can be formulated, depending on the fatty components used.

JMAC LP 10 is a preservative active with antimicrobial properties that reduces the spread of bacteria over the long term. JMAC is also suitable for various industrial applications like paints and coatings. It is also OEKO-TEX® ECO PASSPORT certified.

Low tendency to build up viscosity therefore suitable for use in I&I cleaners . Primary surfactant for hand dishwashing liquids.

Hostapon CGN is a very mild anionic surfactant giving an excellent skin feel in shower gels and facial & body washes. It is convenient to use and is cold-processable.

Nipagin A 200 mesh is a short-chain paraben for higher water solubility. It has a defined particle size of 200 mesh.

Hostacor™ MT is a boron-and DEA-free, water-dispersible corrosion inhibitor with emulsifying properties used for metalworking fluids, rolling emulsions and fire-resistant hydraulic fluids. The product has a very low amine content and a very small acid value. Hostacor™ MT is primarily used for the preparation of aqueous coolants based on mineral oil. By mixing Hostacor™ MT with various types of alkanolamines and fatty acids, pH values and corrosion protection can be adjusted to the need of the respective formulation.

Hostapon TPHC is a low odor high concentrate taurate. It produces moderate foam and is stable over a broad pH range. Its long carbon-chain can also help build viscosity in surfactant formulations.

Hostagel AVS is the perfect thickener for products with high solvent content, such as glass cleaners and hand sanitizers.

Nipacide BIT 20 is an in-can biocide based on BIT.

Hostapon CT paste is an anionic surfactant with excellent foaming properties, lubricity and mildness. It is primarily used as a foam booster for the formulation of cream-type shampoos.

Plantasens Emulsifier DGI is a natural PEG-free emulsifier based on a patented technology. In combination with other emulsifiers or co-emulsifiers it allows a wide range of w/o textures due to its high emulsifying effect. Emulsions obtained with Plantasens Emulsifier DGI have very good spreading properties on the skin and provide a cushony after-feel.

Nipaguard BPX is a broad spectrum antimicrobial agent comprising a synergistic blend of esters of parahydroxybenzoic acid (parabens) and Bronopol in Phenoxyethanol. It is ideal for all difficult to preserve formulations, such as wet wipes and sun screen formulations

Nipacide FC is an in-can biocide based on 1,6-dihydroxy-2,5-dioxahexane (DHD)

The originator of the color change humidity indicator card, Clariant Cargo & Device Protection leads the industry with a wide array of Humitector™ humidity indicators. Following the most rigorous quality standards, including strict color meter testing, Clariant's humidity indicator cards and humidity indicator plugs are designed to meet standards set forth by military agencies and electronic/semiconductor companies, such as Mil-Spec and JEDEC respectively.Further, Clariant offers Maximum humidity indicator cards to the logistics industry, as well as humidity indicators for preservation and commercial applications. Selection includes: Cobalt-Dichloride Free Humidity Indicator Cards Cobalt Free Humidity Indicator Cards Desiccator Plugs & Humidity Indicators Humitector Humidity Indicator Cards

Effective and broad spectrum disinfectant. No EU use. .

Hostagel AV can be used as stabilizer or rheology modifier in a wide variety of applications such as surface cleaning, car polishing, hand care and insects repellents.

Nipagin M is the best water soluble short-chain Paraben.

Hostacor™ DT is a boron free, water-dispersible corrosion inhibitor with emulsifying properties used for metalworking fluids, rolling fluids and fire-resistant hydraulic fluids. It is primarily used for the preparation of water-soluble coolants based on mineral oil. By varying the concentration of Hostacor™ DT, it is possible to adjust the corrosion inhibiting effect of the emulsion to special requirements.

Hostaphat KL 340 D is a flexible emulsifier for challenging formulations that demand stability as well as a pleasant skin feel. This very efficient, pre-neutralized, anionic o/w emulsifier allows the design of emulsions with all types of oils and UV filters. Also very well suitable for low viscosity formats and textures like sprays, lotions and milks.

Hostapon SG is a mild anionic surfactant that gives a rich, creamy foam and contributes to a soft skin feel. It gives excellent rinsability, especially in hard water areas which can help save water when showering. The product is convenient to use (low viscous liquid) and can be processed cold.

Nipacide CI 15 MV is an in-can biocide based on CMIT/MIT. Nipacide CI 15 MW is a water-based, low toxicity biocide developed for the complete in-can protection of water based products including water based /Latex/PVA adhesives, PVA / Acrylic polymer emulsions, water based decorative paints, printing inks, metal working fluids and construction admixtures. Nipacide CI 15 MW is effective against a wide range of microorganisms including gram positive and gram negative bacteria, yeast and fungi. Thermal and pH stability for Nipacide CI 15 MW is a critical consideration and it should not be used for products with pH >8.5 or production temperatures of >40 °C.

Nipacide BIT 10 W is an in-can biocide based on BIT. Nipacide BIT 10 W is a light color, 10% active, VOC free, water-based solution of 1,2-benzisothiazolinone. Nipacide BIT 10 W is a low toxicity biocide developed for the complete in-can protection of water-based products. Nipacide BIT 10 W is effective against a wide range of microorganisms including gram positive and gram negative bacteria, yeast and fungi. Nipacide BIT 10 W should be the biocide of choice for products with pH >8 and production temperatures of >40 C.

Nipaguard PO 5 is a broad spectrum liquid preservative comprising a powerful fungicide in an antibacterial liquid carrier designed for preservation of a wide range of cosmetics and toiletries. It is effective against bacteria, molds and yeasts

Hostaphat OPS 100 is a solubilizer or hydrotope for nonionic detergents in liquid cleaning agents at high ph values and a corrosion inhibitor for aluminium, iron and zinc in alkaline systems. Hostaphat is used for various industrial lubricants applications. Hostaphat is a corrosion inhibitor and EP/AW additive for cutting & forming fluids and fire resistant hydraulic fluids. It is a water-based polymer quenchant for hardening fluids and a mild alkaline type metal cleaner.

Nipacide CI is an in-can biocide based on CMIT/MIT. It is developed for the complete in-can protection of water based products including water based /Latex/PVA adhesives, PVA / Acrylic polymer emulsions, water based decorative paints, printing inks, metal working fluids and construction admixtures.

Nipagin A is a short-chain paraben for higher water solubility.

Nipacide CFX 3 is an in-can biocide based on BIT/MIT combination + DHD (1,6-dihydroxy-2,5-dioxahexane).

Polyglykol MA 2000/55 is a mono methacrylic acid ester of the corresponding polyglycol.

Polyglykol M 5000 is a linear, mono hydroxy-functional polyethylene glycol monomethyl ether (M-PEG).

Nipacide CFX 2 is an in-can biocide based on formaldehyde + chloromethyl and methylisothiazolinone. Nipacide CFX 2 is water-based low toxicity isothiazolinone/ formaldehyde donor biocide, developed for the complete in-can and head space protection of water-based products. Nipacide CFX 2 is effective against a wide range of microorganisms including gram positive and gram negative bacteria, yeast and fungi. When products are prone to surface contamination by fungi and head space protection is required, Nipacide CFX 2 should be the biocide of choice. Nipacide CFX 2 is effective against a wide range of spoilage organisms effective over a wide pH and temperature range.

Nipaguard POB is a broad spectrum liquid preservative comprising a powerful fungicide in an antibacterial liquid carrier designed for preservation of a wide range of cosmetics and toiletries. It is effective against bacteria, molds, and yeasts, and is normally recommended to be used from 0.3-1.0% based on the total weight of the finished product.

Nipacide TBX is an in-can biocide based on benzisothiazolinone + triazine. Nipacide TBX is a low toxicity biocide intended for industrial use only as a microbiostat preservative for aqueous compositions such as adhesives or tackifiers, polymer emulsions and lattices, natural and synthetic thickeners, aqueous slurries, construction compounds, metal working fluids and paints & coatings. Nipacide TBX combines the outstanding stability of Nipacide BIT based biocides with the rapid kill of Nipacide BK.

Medialan KF-J is a plant-based mild surfactant. It functions as effective foaming and lathering agent. Its easy-to-use system also offers advantage on skin and hair care due to the mild benefits it brings into the formulation.

Polyglykol M 3000 FI is a linear, mono hydroxy-functional polyethylene glycol monomethyl ether (M-PEG) that is completely water soluble. Polyglykol M 3000 FI is esterified with methacrylic acid to yield the corresponding polyglycol mono methacrylates which are used for the polymerization of polycarboxylate superplasticizers.

JMAC Composite PG is a preservative active with antimicrobial properties that reduces the spread of bacteria over the long term. The JMAC biocides are effective at very small ppm addition levels and offer low viscosity liquid dispersion. For In-can preservation, the excellent thermal and pH stability of JMAC biocides means they can be used in a wide range of industrial applications, such as polymer emulsions, paints, sealants and adhesives.

Polyglykol MA 1000/70 is a mono methacrylic acid ester of the corresponding polyglycols.

Medialan LD is a plant-based anionic surfactant . It combines good cleansing properties with good skin conditioning. Among other applications, it is widely used as a foaming agent in dental care preparations, especially in toothpastes.

Hostapon CLG is a very mild co-surfactant with a pleasant skin feel. It is cold-processable and preservative-free.

Hostacerin DGSB is an emulsifier providing viscosity-increasing properties. Also applicable as co-emulsifier for cosmetic o/w emulsions and cream rinses.

Nipacide CFX 4 is an in-can biocide based on formaldehyde + chloromethyl and methylisothiazolinone. Nipacide CFX 4 is a water-based low toxicity isothiazolinone/ formaldehyde donor biocide, developed for the complete in-can and head space protection of water-based products. Nipacide CFX 4 is effective against a wide range of microorganisms including gram positive and gram negative bacteria, yeast and fungi. When products are prone to surface contamination by fungi and head space protection is required, Nipacide CFX 4 should be the biocide of choice. Nipacide CFX 4 is effective against a wide range of spoilage organisms and pH stable up to pH 9 and temperature stable up to 40 °C.

Nipagin M 200 mesh is a water soluble short-chain Parabe. It has a defined particle size of 200 mesh.

Nipacide BSM is an In-can biocide based on BIT/MIT.

Nipaguard DMDMH is a formaldehyde donor. It combines the benefits of broad spectrum antimicrobial activity with the ease of liquid handling. It has good performance against bacteria but is not recommended for oral care. It is non-irritating to eyes, skin and mucous membranes.

Emulsogen LCN 118 is used as a nonionic emulsifier for emulsion polymerization improving the shear, temperature and electrolyte stability of polymer dispersions. The recommended usage is 2% active based on monomers.In waterborne and solvent-borne lacquers (low PVC), Emulsogen LCN 118 can be used as a compatibilizer to improve tinting strength and to reduce rub-out, water absorption, and haze effects. Dosage recommendation (supply form) in waterborne acrylic lacquers is 1.3-1.9% and in solvent-borne alkyd lacquers 0.33-0.66%. When used during the premixing phase in the production of waterborne emulsion paints (high PVC), Emulsogen LCN 118 also acts as a processing aid and helps to reduce the grinding time by faster deagglomeration of TiO2 and fillers. This is especially of interest in areas of hard water. The general dosage recommendation (supply form) for this purpose is 0.3%.

Hostacerin CS 200 is a non ionic emulsifier, easy to use, O/W emulsifier. Provides good estability to O/W emulsions. Hostacerin CS 200 is used in wet wipes, hair conditioners, creams and lotions

Emulsogen EPN 118 is used as nonionic emulsifier for the emulsion polymerization of monomers like acrylates, styrene-acrylates, styrene-butadiene and vinyl acetate.

Emulsogen™ EL 360 is a castor oil-based nonionic emulsifier with high emulsification power. The product shows excellent emulsification characteristics for many solvents and is not eye-irritating. It is widely used in different agrochemical formulation types and especially recommended for EC and EW..

Genamin KDMP is a cationic surfactant that is mainly used in cream-type hair conditioners and hair replenishing treatments. The concentration required depends on the hair. The more damaged the hair is, the more Genamin KDMP will be used to achieve best effect.

Emulsogen™ M is an excellent nonionic emulsifier for many common oils. It is easy to formulate with a low pour pointt.

Dispersogen 2774 is a nonionic, polymeric dispersing agent for water-based pigment preparations, suitable for organic pigments and carbon black. Dispersogen 2774 is especially recommended for use in concentrates for in-plant tinting. The general dosage recommendation is 10-40% on organic pigments.

Emulsogen PF 20 S is used as anionic emulsifier in emulsion polymerization, particularly in the manufacture of acrylic and styrene acrylic binders for paint applications.

Emulsogen™ 3510 is an EO/PO block copolymer with high emulsification power. The product shows excellent emulsification characteristics for many solvents and is not eye-irritating. It is widely used in different agrochemical formulation types and especially recommended for EC and EW.

Dispersogen AN 100 is a surfactant-based dispersing agent for water-based and solvent based pigment preparations, suitable for inorganic and organic pigments and carbon blacks. Dispersogen AN 100 is a 3 – in – 1 product with nonionic and anionic surface active components and a polyglycol as humectant. Dispersogen AN 100 is especially recommended for use in point-of-sales colorants and concentrates for in-plant tinting. The general dosage recommendation is 20- 50 % on inorganic pigments and 5-20% on organic pigments.

Dispersogen 1728 is an anionic, polymeric dispersing agent for water-based pigment preparations, suitable for organic pigments and carbon blacks.Dispersogen 1728 is especially recommended for use in concentrates for in-plant tinting. The general dosage recommendation is 12-50% on organic pigments.

Emulsogen EPA 073 is used as anionic emulsifier for the emulsion polymerization of monomers like pure acrylic, styrene-acrylic acid esters and vinyl acetate.

Dispersogen SPS is a low viscous, cationic stabilizer for mineral paints containing potassium water glass, such as silicate and organosilicate paints. The product reduces the increase in viscosity during storage and helps to improve the rheological profile of the paint. The recommended dosage is 0.5 – 1.5% in the paint formulation. Dispersogen SPS is APEO-free and suitable for ecolabel certified paints.

Genamin BTMS is a safe, efficient and widely used conditioning quat. Outstanding performance on hair, such as soft, natural feel and excellent dry combing properties is combined with safe and convenient handling. Genamin BTMS offers a superb softening effect for thick and hard to manage hair. It is soluble in aqueous systems, compatible with cationic and amphoteric surfactants, and has excellent stability over wide pH range.

Emulsogen™ COL 050 is a low foaming ether carboxylic acid with good emulsification and dispersing properties, used for metal working fluids, fire resistant hydraulic fluids (HFA-S) and rolling emulsions. Emulsogen™ COL 050 also offers good corrosion protection if neutralized with alkanolamines. The product is extremely stable against electrolyte and hard water. Furthermore Emulsogen™ COL 050 has good lime soap dispersing power, being able to disperse large quantities of calcium oleate or tallate.

Emulsogen™ EL 200 is a castor oil-based nonionic emulsifier with high emulsification power. The product shows excellent emulsification characteristics for many solvents and is not eye-irritating. It is widely used in different agrochemical formulation types and especially recommended for EC and EW.

Emulsogen EL 300 is a standard NPE-free emulsifier in various EC formulations. The product shows excellent emulsification characteristics for many solvents and is not eye-irritating.

Dispersogen LFH is an anionic, surfactant-based dispersing agent for water-based pigment preparations, suitable for inorganic and organic pigments and carbon blacks.Dispersogen LFH is recommended for use in point-of-sales colorants and concentrates for in-plant tinting, in combination with a nonionic dispersing agent such as Dispersogen MT 200. The general dosage recommendation is 4-20% on organic pigments and 1-6% on inorganic pigments.

Emulsogen™ EL 540 is a castor oil-based nonionic emulsifier with high emulsification power. The product shows excellent emulsification characteristics for many solvents and is not eye-irritating. It is widely used in different agrochemical formulation types and especially recommended for EC and EW.

Genamin C 020 is an amine ethoxylate based on coconut fatty amine. Lower ethoxylated amine ethoxylates can be used as compatibilizer for high-load glyphosate formulations.

Emulsogen EPA 1954 is used as anionic emulsifier for the emulsion polymerization of vinyl acetate dispersions, styrene-butadiene latex and E-PVC.

Emulsogen LCN 070 is used as nonionic emulsifier for the emulsion polymerization of monomers like acrylates, styrene-acrylates and vinyl acetate.

Electrolyte and hard water stable (anionic) surfactant with excellent lime soap dispersing properties. Medium foaming.

Dispersogen PCE is an anionic, polymeric dispersing agent for water-based pigment preparations, suitable for inorganic pigments.Dispersogen PCE is recommended for in-plant tinting systems. The general dosage recommendation is 5 - 25% on inorganic pigments.

Emulsogen DTC Acid is a electrolyte and hard water stable anionic surfactant with excellent lime soap dispersing properties.

Emulsogen EPN 287 is used as nonionic emulsifier for the emulsion polymerization of monomers like acrylates, styrene-acrylates, styrene-butadiene and vinyl acetate.

Emulsogen EPN 217 is used as nonionic emulsifier for the emulsion polymerization of monomers like acrylates, styrene-acrylates, styrene-butadiene and vinyl acetate.

Genamin T 150 is the standard Adjuvant for Glyphosate IPA formulations. When using Genamin T 150, the addition of a solubilizer is necessary to obtain cold-temperature stability and dissolution behavior in the spray tank.

Emulsogen TS 200 is a nonionic wetting agent for use as a compatibilizer in waterborne high PVC paints, as well as in waterborne and solvent-borne low PVC lacquers. The general dosage (supply form) is 1.0-1.5% in emulsion paints and in acrylic lacquers, and 0.25% in alkyd lacquers. The additive can also be used as a dispersing agent in water-based pigment preparations, suitable for organic pigments and carbon blacks. Emulsogen TS 200 is recommended for POS-colorants as well as for concentrates for in-plant tinting. The general dosage recommendation is 5-30% on organic pigments and 20-40% on carbon black.Furthermore, Emulsogen TS 200 acts as a nonionic emulsifier for the emulsion polymerization of monomers like acrylates, styrene-acrylates, and vinyl acetate.

Dispersogen PTS is a nonionic, surfactant based dispersing agent for water-based pigment preparations, suitable for organic pigments and carbon blacks.The product is recommended for use in point-of-sales colorants and concentrates for in-plant tinting. The general dosage recommendation is 5-40% on organic pigments.

Dispersogen FA is a nonionic, surfactant based dispersing agent for water-based and solvent based pigment preparations, suitable for inorganic and organic pigments.

Genadvance SPA is a premium conditioning superstar for luxurious hair care experiences. With its deeply nourishing properties and exceptional hair softening capabilities, it delivers superior performance while maintaining compatibility with anionic surfactants. Especially suitable for rich, caring formulations requiring versatile conditioning that leaves hair irresistibly smooth and pampered.

Dispersogen 3169 is an anionic, polymeric dispersing agent for water-based pigment preparations, suitable for organic pigments and carbon blacks.Dispersogen 3169 is especially recommended for use in concentrates for in-plant tinting. The general dosage recommendation is 12-50% on organic pigments.

Genamin DSAP is used mainly in cream-type hair conditioners and hair replenishing treatments. It is also suitable for skin care preparations. The concentration required depends on the hair. The more damaged the hair is the more Genamin DSAP will be used to achieve best effect, starting at about 0.5% up to 2.0%, relative to the active substance

D-FOAM-R M752 is a high performance, water based, foam control product for metalworking fluids and cleaners. D-FOAM-R M752 contains defoaming surfactants and organo-modified silicone materials that are cold water rinseable and will not cause coating defects or adhesion problems. It offers excellent compatibility and persistence in all types of metalworking fluids, in some cases at concentrations as low as 50 ppm.

Dispersogen™ PSL 100 is a non-ionic comb-shaped polyacrylate based polymeric dispersing agent which is highly effective at low concentrations. It can be used in highly stable SC formulations. It is provided in easy-to-handle liquid form.

D-FOAM-R T297 is a 100% active, non-silicone foam control concentrate designed for textile wet processing. It can easily be diluted with mineral seal oil (or other solvents) and/or surfactants to prepare a range of effective, ‘ready to use’ defoamers. Foam control products formulated from D-FOAM-R T297 are very well suited for pressurized dyeing of synthetic fabrics and synthetic blends. D-FOAM-R T297 can also be formulated into scours, wetting agents, penetrants and other textile processing auxiliaries.

Genagen SBF is a stearamidopropyl betaine used in industial cleaners as well as in vehicle care and areosols.

Genamin TA 100 is a fatty amine dispersing agent for pigment preparations.

Emulsogen SF 8 is used as wetting agent for textile and paper coatings applications

Emulsogen 4084 is used as nonionic emulsifier for the emulsion polymerization of monomers like pure acrylic, styrene-acrylic acid esters and vinyl acetate.

Emulsogen LCN 217 is used as nonionic emulsifier for the emulsion polymerization of monomers like acrylates, styrene-acrylates, styrene-butadiene and vinyl acetate. It improves the shear, temperature and electrolyte stability of polymer dispersions. The recommended usage is 2% active based on monomers.

Emulsogen™ CIO 050 is a very low foaming ether carboxylic acid with excellent emulsification properties, used for metal working fluids, fire resistant hydraulic fluids (HFA-S) and rolling emulsions. Emulsogen™ CIO 050 shows good corrosion protection if neutralized with alkanolamines. The product is extremely stable against electrolyte and hard water.

Dispersogen LFS is an anionic, surfactant-based dispersing agent for water-based pigment preparations, suitable for inorganic and organic pigments as well as for specialty carbon blacks. The product is recommended for use in point-of-sales colorants and concentrates for in-plant tinting. Dispersogen LFS can be used as a stand-alone dispersing agent for organic pigments. For inorganic pigment, it is used in combination with a nonionic dispersing agent such as Dispersogen MT 200. The general dosage recommendation is 5-25% on organic pigments and 4-10% on inorganic pigments.Dispersogen LFS also acts as wetting agent/compatibilizer in waterborne high PVC paints as well as in waterborne and solvent-borne low PVC lacquers. The general dosage (supply form) is 1.0-1.5% in emulsion paints, 1.0-1.5% in acrylic lacquers and 0.5-1.0% in alkyd lacquers.

Genamin BTLF is an exclusive form of Behentrimonium Chloride, free of any flammable solvents. Genamin BTLF provides a safe, efficient and easy to use blend of this very successful and widely used conditioning quat. Outstanding performance on hair, such as soft, natural feel and excellent dry combing properties is now combined with safe and convenient handling. Hair damaged by bleaching, permanent waving or excessive degreasing feels and looks dull and lifeless. Genamin BTLF greatly improves the condition of the hair, making the hair look healthy and strong. Genamin BTLF offers a superb softening effect also for thick and hard to manage hair. The antistatic effect of Genamin BTLF is also noteworthy.

Emulsogen™ MTP 070 is a multifunctional label-free nonionic emulsifier for metal working fluids with outstanding lime soap dispersing and low foaming properties. Emulsogen™ MTP 070 is able to disperse large quantities of calcium oleate or tallate. Because of its excellent solubility in almost all kinds of mineral oils, Emulsogen™ MTP 070 can be used as an anti-wear additive to improve lubricity. Emulsogen™ MTP 070 has a sustainable profile, reducing the impact on the environment and being safe to the personal health.

Emulsogen™ COL 100 is an ether carboxylic acid with excellent emulsification and dispersing properties. It is used as a co-emulsifier in a broad variety of emulsifiable metal working fluids. In combination with other suitable nonionic or anionic components, as little as 2-3 % Emulsogen™ COL 100 in the mineral oil concentrate are sufficient to improve emulsion stability and dispersity. Emulsogen™ COL 100 also shows outstanding lime soap dispersing power and is able to disperse large quantities of calcium oleate or tallate.

Genamin T 050 is a neutralising agent for corrosion protection oils, cutting & forming fluids and rolling fluids. Its appearance is clear, yellowish to brown liquid.

Genagen 3SB is an optimized, mild three surfactant blend of Coco Betaine, Sodium Methyl Cocoyl Taurate and Sodium Cocoyl Isethionate. It is a mild surfactant blend which can be processed cold.

Dispersogen ECS is an anionic, surfactant-based dispersing agent for water-based and solvent-based pigment preparations, suitable for organic pigments and specialty carbon blacks. The product is especially recommended for use in in-plant tinters. The general dosage recommendation is 20 - 50 % on organic pigments. Dispersogen ECS also acts as wetting agent/compatibilizer in waterborne high PVC paints as well as in waterborne and solvent-borne low PVC lacquers. The general dosage (in supply form) is 1.7-3.3% in emulsion paints, 3.3-5.0% in acrylic lacquers and 0.85-1.7% in alkyd lacquers.

Dispersogen™ SI is a ready to use and optimized combination of dispersing and wetting agents for application with solid (WP and WG) formulations.

Emulsogen EPN 407 is used as nonionic emulsifier for the emulsion polymerization of monomers like acrylates, styrene-acrylates, styrene-butadiene and vinyl acetate.

Genamin STAC is a plant-based, cationic surfactant used in Hair Care products. Hair damaged by bleaching, permanent waving or excessive degreasing tends to mat. Genamin STAC, used in cream aftertreatment preperations, considerably improves the wet combing properties and the condition of the hair.

Genamin S 080 is a wetting Agent and can have other Adjuvant functions. It can be used in different formulation types.

Emulsogen HCO 040 is a solubilizer for active, essential and perfume oils and an O/W emulsifier for special emulsions.

Genamin S 100 is a wetting Agent and can have other Adjuvant functions. It can be used in different formulation types.

Genagen 4166 is a dimethylamide based on naturally derived fatty acids. This versatile water immiscible solvent shows excellent solvent power, prevents crystallization of actives and can be used for various formulation types (EC, EW and DC).

Emulsogen HCW 049 is a solubilizer for active, essential and perfume oils and an O/W emulsifier for special emulsions. This ingredient version is an easy-to-use and cold-processable solution for formulators.

Emulsogen™ EP 4901 is a highly efficient emulsifier and dispersant for a variety of Crop formulations including EC, EW, SC, DC, FS, SE, OD and ME. It is suitable for use as an inert ingredient according to US NOP. Emulsogen™ EP 4901 is compatible with several microorganisms used in microbial Biological formulations..

Emulsogen LCN 287 is used as a nonionic emulsifier for the emulsion polymerization of monomers like acrylates, styrene-acrylates, styrene-butadiene, and vinyl acetate. It improves the shear, temperature and electrolyte stability of polymer dispersions. The recommended usage is 1-3% active based on monomers.Emulsogen LCN 287 also acts as wetting agent/compatibilizer in waterborne acrylic lacquers (low PVC). The general dosage (supply form) for this purpose is 1.4%-2.1%. The product is suitable for low odor paints applying for eco-labels such as Blue Angel or Ecoflower.

Dispersogen 4387 is an anionic, surfactant-based dispersing agent for water-based pigment preparations, suitable for inorganic and organic pigments as well as for specialty carbon blacks. Dispersogen 4387 is especially recommended for use in point-of-sales colorants and concentrates for in-plant tinting. The general dosage recommendation is 10-30 % on organic pigments and 5-10% on inorganic pigments.

Dispersogen FSE is a nonionic, surfactant based dispersing agent for water-based and solvent based pigment preparations, suitable for inorganic pigments.Dispersogen FSE is recommended for use in point-of-sales colorants, in combination with an anionic dispersing agent such as Dispersogen 145, Dispersogen 4387, Dispersogen LFH or Dispersogen LFS. The general dosage recommendation is 5- 10 % on inorganic pigments.

Genamin M 41/2000 is a random EO/PO copolymer end-capped with a primary amino group.

Emulsogen LCN 407 is used as nonionic emulsifier for the emulsion polymerization of monomers like acrylates, styrene-acrylates and vinyl acetate.

D-FOAM-R B2552 is a 100% synthetic base, silicone free foam control additive. It is used to provide rapid air release in a wide range of construction materials including mortar mixes, self leveling cements, plaster and polymer modified concrete. D-FOAM-R B2552 is compatible and can be mixed with PCE-Superplasticizers to prevent entrapped air formation.

Calsogen™ EH is a versatile anionic emulsifier based on branched CaDDBS in an aromatic-free 2-ethylhexanol with a high flash pointt for safer handling. It is used in different agrochemical formulation types and especially recommended for ECs.

Polyglykol A 1100 C is a polyglycol allylether which can be directly polymerized.

Water-soluble defoamer for surfactant-containing cleaning liquors.