Coatings, Paints & Inks

From industrial coatings to colorants for toner technologies

solutions_industries_coatings_paints_inks_1160x451_banner
  • Products

    • Colanyl Black N 131

      Colanyl Black N 131 is a binder-free, aqueous pigment preparation based on nonionic and / or anionic wetting and dispersing agents and propylene glycol. The product has a pourable and pumpable consistency and is suitable for dosing machines. Because of the excellent weathering fastness, it is suitable for interior and exterior use. more

    • Colanyl Black N 500

      Colanyl Black N 500 is an aqueous binder-free pigment preparation manufactured without using alkyl phenol ethoxylated (APEO) additives. This aqueous pigment preparation is compatible with water-based low VOC and VOC-free decorative coatings.* The main application fields of Colanyl Black N 500 are new generation of dispersion paints and renderings/plaster based on aqueous polymer dispersions. Colanyl Black N 500 is also compatible with some other binder systems, e.g. water-based industrial paints, but the maximum dosage level and compatibility of Colanyl Black N 500 has to be checked in the customer paint system itself. * As defined in EU directive 2004/42/EC, annex II, phase II. VOC standards and regulations vary by location. Product specific VOC information is available to customers upon request. It is the responsibility of the coatings manufacturer to determine standard compliance and appropriate claim for their products. more

    • Colanyl Black PR 130

      Colanyl Black PR 130 is a binder-free, aqueous pigment preparation based on nonionic and / or anionic wetting and dispersing agents and propylene glycol. The product has a pourable and pumpable consistency and is suitable for dosing machines. Because of the excellent weathering fastness, it is suitable for interior and exterior use. more

    • Colanyl Blue A2R 500

      Colanyl Blue A2R 500 is an aqueous binder-free pigment preparation manufactured without using alkyl phenol ethoxylated (APEO) additives. This aqueous pigment preparation is compatible with water-based low VOC and VOC-free decorative coatings.* The main application fields of Colanyl Blue A2R 500 are new generation of dispersion paints and renderings/plaster based on aqueous polymer dispersions. Colanyl Blue A2R 500 is also compatible with some other binder systems, e.g. water-based industrial paints, but the maximum dosage level and compatibility of Colanyl Blue A2R 500 has to be checked in the customer paint system itself. By using Colanyl Blue A2R 500 in automatic and manual dispensers, excellent accuracy and reliability when poured or pumped have been observed. Furthermore, Colanyl Blue A2R 500 is miscible in all proportions with other Colanyl 500 preparations. By adding Colanyl Extender MS 530, the color strength of Colanyl Blue A2R 500 can be adjusted. * As defined in EU directive 2004/42/EC, annex II, phase II. VOC standards and regulations vary by location. Product specific VOC information is available to customers upon request. It is the responsibility of the coatings manufacturer to determine standard compliance and appropriate claim for their products. more

    • Colanyl Blue B2G 131

      Colanyl Blue B2G 131 is a binder-free, aqueous pigment preparation based on nonionic and / or anionic wetting and dispersing agents and propylene glycol. The product has a pourable and pumpable consistency and is suitable for dosing machines. Because of its good durability, it can be used for interior and exterior use after adequate weathering tests. more

    • Colanyl Blue B2G 500

      Colanyl Blue B2G 500 is an aqueous binder-free pigment preparation manufactured without using alkyl phenol ethoxylated (APEO) additives. This aqueous pigment preparation is compatible with water-based low VOC and VOC-free decorative coatings.* * As defined in EU directive 2004/42/EC, annex II, phase II. VOC standards and regulations vary by location. Product specific VOC information is available to customers upon request. It is the responsibility of the coatings manufacturer to determine standard compliance and appropriate claim for their products. more

    • Colanyl Carmine FB 130

      Colanyl Carmine FB 130 is a binder-free, aqueous pigment preparation based on nonionic and / or anionic wetting and dispersing agents and propylene glycol. The product has a pourable and pumpable consistency and is suitable for dosing machines. Because of the moderate durability, it is suitable for interior use only. more

    • Colanyl Extender MS 530

      Colanyl Extender MS 530 is an aqueous binder-free pigment preparation based on a colorless inorganic extender and manufactured without using alkyl phenol ethoxylated (APEO) additives. This aqueous pigment preparation is compatible with water-based low VOC and VOC-free decorative coatings.* * As defined in EU directive 2004/42/EC, annex II, phase II. VOC standards and regulations vary by location. Product specific VOC information is available to customers upon request. It is the responsibility of the coatings manufacturer to determine standard compliance and appropriate claim for their products. more

    • Colanyl Green GG 131

      Colanyl Green GG 131 is a binder-free, aqueous pigment preparation based on nonionic and / or anionic wetting and dispersing agents and propylene glycol. The product has a pourable and pumpable consistency and is suitable for dosing machines. Because of its good durability, it can be used for interior and exterior use after adequate weathering tests. more

    • Colanyl Green GG 500

      Colanyl Green GG 500 is an aqueous binder-free pigment preparation manufactured without using alkyl phenol ethoxylated (APEO) additives. This aqueous pigment preparation is compatible with water-based low VOC and VOC-free decorative coatings.* * As defined in EU directive 2004/42/EC, annex II, phase II. VOC standards and regulations vary by location. Product specific VOC information is available to customers upon request. It is the responsibility of the coatings manufacturer to determine standard compliance and appropriate claim for their products. more

    • Colanyl Oxide Black B 100

      Colanyl Oxide Black B 100 is a binder-free, aqueous pigment preparation based on nonionic and / or anionic wetting and dispersing agents and propylene glycol. The product has a pourable and pumpable consistency and is suitable for dosing machines. Because of its good durability, it can be used for interior and exterior use after adequate weathering tests. more

    • Colanyl Oxide Black IR 500 VP 5148

      Colanyl Oxide Black IR 500 VP 5148 is a aqueous, binder-free pigment preparation and manufactured without using alkyl phenol ethoxylated (APEO) additives. This aqueous pigment preparation are compatible with water-based, VOC-free and VOC-low decorative coatings.* * As defined in EU directive 2004/42/EC, annex II, phase II. VOC standards and regulations vary by location. Product specific VOC information is available to customers upon request. It is the responsibility of the coatings manufacturer to determine standard compliance and appropriate claim for their products. more

    • Colanyl Oxide Blue COR 100

      Colanyl Oxide Blue COR 100 is a binder-free, aqueous pigment preparation based on nonionic and / or anionic wetting and dispersing agents and propylene glycol. The product has a pourable and pumpable consistency and is suitable for dosing machines. Because of the excellent weathering fastness, it is suitable for interior and exterior use. more

    • Colanyl Oxide Blue COR 530

      Colanyl Oxide Blue COR 530 is an aqueous binder-free pigment preparation manufactured without using alkyl phenol ethoxylated (APEO) additives. This aqueous pigment preparation is compatible with water-based low VOC and VOC-free decorative coatings.* * As defined in EU directive 2004/42/EC, annex II, phase II. VOC standards and regulations vary by location. Product specific VOC information is available to customers upon request. It is the responsibility of the coatings manufacturer to determine standard compliance and appropriate claim for their products. more

    • Colanyl Oxide Green CO 100

      Colanyl Oxide Green CO 100 is a binder-free, aqueous pigment preparation based on nonionic and / or anionic wetting and dispersing agents and propylene glycol. The product has a pourable and pumpable consistency and is suitable for dosing machines. Because of the excellent weathering fastness, it is suitable for interior and exterior use. more

    • Colanyl Oxide Green G 131

      Colanyl Oxide Green G 131 is a binder-free, aqueous pigment preparation based on nonionic and / or anionic wetting and dispersing agents and propylene glycol. The product has a pourable and pumpable consistency and is suitable for dosing machines. Because of the excellent weathering fastness, it is suitable for interior and exterior use. more

    • Colanyl Oxide Green G 530

      Colanyl Oxide Green G 530 is an aqueous binder-free pigment preparation manufactured without using alkyl phenol ethoxylated (APEO) additives. This aqueous pigment preparation is compatible with water-based low VOC and VOC-free decorative coatings.* * As defined in EU directive 2004/42/EC, annex II, phase II. VOC standards and regulations vary by location. Product specific VOC information is available to customers upon request. It is the responsibility of the coatings manufacturer to determine standard compliance and appropriate claim for their products. more

    • Colanyl Oxide Olive GS 130

      Colanyl Oxide Olive GS 130 is a binder-free, aqueous pigment preparation based on nonionic and / or anionic wetting and dispersing agents and propylene glycol. This pigment preparation contains a mixture of iron oxide yellow and iron oxide black. The product has a pourable and pumpable consistency and is suitable for dosing machines. Because of the excellent weathering fastness, it is suitable for interior and exterior use. more

    • Colanyl Oxide Red B 130

      Colanyl Oxide Red B 130 is a binder-free, aqueous pigment preparation based on nonionic and / or anionic wetting and dispersing agents and propylene glycol. The product has a pourable and pumpable consistency and is suitable for dosing machines. Because of the excellent weathering fastness, it is suitable for interior and exterior use. more

    • Colanyl Oxide Red B 530

      Colanyl Oxide Red B 530 is an aqueous binder-free pigment preparation manufactured without using alkyl phenol ethoxylated (APEO) additives. This aqueous pigment preparation is compatible with water-based low VOC and VOC-free decorative coatings.* * As defined in EU directive 2004/42/EC, annex II, phase II. VOC standards and regulations vary by location. Product specific VOC information is available to customers upon request. It is the responsibility of the coatings manufacturer to determine standard compliance and appropriate claim for their products. more

    • Colanyl Oxide Red G 100

      Colanyl Oxide Red G 100 is a binder-free, aqueous pigment preparation based on nonionic and / or anionic wetting and dispersing agents and propylene glycol. The product has a pourable and pumpable consistency and is suitable for dosing machines. Because of the excellent weathering fastness, it is suitable for interior and exterior use. more

    • Colanyl Oxide Red G 530

      Colanyl Oxide Red G 530 is an aqueous binder-free pigment preparation manufactured without using alkyl phenol ethoxylated (APEO) additives. This aqueous pigment preparation is compatible with water-based low VOC and VOC-free decorative coatings.* * As defined in EU directive 2004/42/EC, annex II, phase II. VOC standards and regulations vary by location. Product specific VOC information is available to customers upon request. It is the responsibility of the coatings manufacturer to determine standard compliance and appropriate claim for their products. more

    • Colanyl Oxide Yellow BV 100

      Colanyl Oxide Yellow BV 100 is a binder-free, aqueous pigment preparation based on nonionic and / or anionic wetting and dispersing agents and propylene glycol. The product has a pourable and pumpable consistency and is suitable for dosing machines. Because of the excellent weathering fastness, it is suitable for interior and exterior use. more

    • Colanyl Oxide Yellow BV 530

      Colanyl Oxide Yellow BV 530 is an aqueous binder-free pigment preparation manufactured without using alkyl phenol ethoxylated (APEO) additives. This aqueous pigment preparation is compatible with water-based low VOC and VOC-free decorative coating.* * As defined in EU directive 2004/42/EC, annex II, phase II. VOC standards and regulations vary by location. Product specific VOC information is available to customers upon request. It is the responsibility of the coatings manufacturer to determine standard compliance and appropriate claim for their products. more

    • Colanyl Oxide Yellow CR 130

      Colanyl Oxide Yellow CR 130 is a binder-free, aqueous pigment preparation based on nonionic and / or anionic wetting and dispersing agents and propylene glycol. The product has a pourable and pumpable consistency and is suitable for dosing machines. Because of the excellent weathering fastness, it is suitable for interior and exterior use. more

    • Colanyl Oxide Yellow CR 530

      Colanyl Oxide Yellow CR 530 is an aqueous binder-free pigment preparation manufactured without using alkyl phenol ethoxylated (APEO) additives. This aqueous pigment preparation is compatible with water-based low VOC and VOC-free decorative coatings.* * As defined in EU directive 2004/42/EC, annex II, phase II. VOC standards and regulations vary by location. Product specific VOC information is available to customers upon request. It is the responsibility of the coatings manufacturer to determine standard compliance and appropriate claim for their products. more

    • Colanyl Oxide Yellow R 132

      Colanyl Oxide Yellow R 132 is a binder-free, aqueous pigment preparation based on nonionic and / or anionic wetting and dispersing agents and propylene glycol. The product has a pourable and pumpable consistency and is suitable for dosing machines. Because of the excellent weathering fastness, it is suitable for interior and exterior use. more

    • Colanyl Oxide Yellow R 531

      Colanyl Oxide Yellow R 531 is a aqueous, binder-free pigment preparation and manufactured without using alkyl phenol ethoxylated (APEO) additives. This aqueous pigment preparation are compatible with water-based, VOC-free and VOC-low decorative coatings. * * As defined in EU directive 2004/42/EC, annex II, phase II. VOC standards and regulations vary by location. Product specific VOC information is available to customers upon request. It is the responsibility of the coatings manufacturer to determine standard compliance and appropriate claim for their products. more

    • Colanyl Pink E 100

      Colanyl Pink E 100 is a binder-free, aqueous pigment preparation based on nonionic and / or anionic wetting and dispersing agents and propylene glycol. The product has a pourable and pumpable consistency and is suitable for dosing machines. Because of the moderate durability, it is suitable for interior use only. more

    • Colanyl Red D3GD 500

      Colanyl Red D3GD 500 is an aqueous binder-free pigment preparation manufactured without using alkyl phenol ethoxylated (APEO) additives. This aqueous pigment preparation is compatible with water-based low VOC and VOC-free decorative coatings.* * As defined in EU directive 2004/42/EC, annex II, phase II. VOC standards and regulations vary by location. Product specific VOC information is available to customers upon request. It is the responsibility of the coatings manufacturer to determine standard compliance and appropriate claim for their products. more

    • Colanyl Red E3B 130

      Colanyl Red E3B 130 is a binder-free, aqueous pigment preparation based on nonionic and / or anionic wetting and dispersing agents and propylene glycol. The product has a pourable and pumpable consistency and is suitable for dosing machines. Because of the moderate durability, it is suitable for interior use only. more

    • Colanyl Red E3B 500

      Colanyl Red E3B 500 is an aqueous binder-free pigment preparation manufactured without using alkyl phenol ethoxylated (APEO) additives. This aqueous pigment preparation is compatible with water-based low VOC and VOC-free decorative coatings.* * As defined in EU directive 2004/42/EC, annex II, phase II. VOC standards and regulations vary by location. Product specific VOC information is available to customers upon request. It is the responsibility of the coatings manufacturer to determine standard compliance and appropriate claim for their products. more

    • Colanyl Red FGR 131

      Colanyl Red FGR 131 is a binder-free, aqueous pigment preparation based on nonionic and / or anionic wetting and dispersing agents and propylene glycol. The product has a pourable and pumpable consistency and is suitable for dosing machines. more

    • Colanyl Red FGR 530

      Colanyl Red FGR 530 is an aqueous binder-free pigment preparation manufactured without using alkyl phenol ethoxylated (APEO) additives. This aqueous pigment preparation is compatible with water-based low VOC and VOC-free decorative coatings.* * As defined in EU directive 2004/42/EC, annex II, phase II. VOC standards and regulations vary by location. Product specific VOC information is available to customers upon request. It is the responsibility of the coatings manufacturer to determine standard compliance and appropriate claim for their products. more

    • Colanyl Red FGRD 500

      Colanyl Red FGRD 500 is an aqueous binder-free pigment preparation manufactured without using alkyl phenol ethoxylated (APEO) additives. This aqueous pigment preparation is compatible with water-based low VOC and VOC-free decorative coatings.* * As defined in EU directive 2004/42/EC, annex II, phase II. VOC standards and regulations vary by location. Product specific VOC information is available to customers upon request. It is the responsibility of the coatings manufacturer to determine standard compliance and appropriate claim for their products. more

    • Colanyl Red FGRG 130

      Colanyl Red FGRG 130 is a binder-free, aqueous pigment preparation based on nonionic and / or anionic wetting and dispersing agents and propylene glycol. The product has a pourable and pumpable consistency and is suitable for dosing machines. Because of the moderate durability, it is suitable for interior use only. more

    • Colanyl Red FRLL 131

      Colanyl Red FRLL 131 is a binder-free, aqueous pigment preparation based on nonionic and / or anionic wetting and dispersing agents and propylene glycol. The product has a pourable and pumpable consistency and is suitable for dosing machines. Because of the moderate durability, it is suitable for interior use only. more

    • Colanyl Red GG 131

      Colanyl Red GG 131 is a binder-free, aqueous pigment preparation based on nonionic and / or anionic wetting and dispersing agents and propylene glycol. The product has a pourable and pumpable consistency and is suitable for dosing machines. Because of the moderate durability, it is suitable for interior use only. more

    • Colanyl Red GG 500

      Colanyl Red GG 500 is an aqueous binder-free pigment preparation manufactured without using alkyl phenol ethoxylated (APEO) additives. This aqueous pigment preparation is compatible with water-based low VOC and VOC-free decorative coatings.* * As defined in EU directive 2004/42/EC, annex II, phase II. VOC standards and regulations vary by location. Product specific VOC information is available to customers upon request. It is the responsibility of the coatings manufacturer to determine standard compliance and appropriate claim for their products. more

    • Colanyl Red HF3S 500

      Colanyl Red HF3S 500 is an aqueous binder-free pigment preparation manufactured without using alkyl phenol ethoxylated (APEO) additives. This aqueous pigment preparation is compatible with water-based low VOC and VOC-free decorative coatings.* * As defined in EU directive 2004/42/EC, annex II, phase II. VOC standards and regulations vary by location. Product specific VOC information is available to customers upon request. It is the responsibility of the coatings manufacturer to determine standard compliance and appropriate claim for their products. more

    • Colanyl Scarlet GO 130

      Colanyl Scarlet GO 130 is an aqueous, binder-free pigment preparation manufactured without using alkyl phenol ethoxylated (APEO) additives. It is used for the efficient coloration of water-based decorative paints. Colanyl Scarlet GO 130 is based on non-ionic and/ or anionic wetting and dispersing agents. Colanyl 100 contains volatile organic compounds (VOC). The rheological profile allows exact dosing in automatic and manual dispensers as well as easy incorporation into the base paints. Furthermore, the processing of Colanyl Scarlet GO 130 is facilitated by its excellent stability to settling and skinning. more

    • Colanyl Scarlet GO 530

      Colanyl Scarlet GO 530 is an aqueous binder-free pigment preparation manufactured without using alkyl phenol ethoxylated (APEO) additives. This aqueous pigment preparation is compatible with water-based low VOC and VOC-free decorative coatings.* * As defined in EU directive 2004/42/EC, annex II, phase II. VOC standards and regulations vary by location. Product specific VOC information is available to customers upon request. It is the responsibility of the coatings manufacturer to determine standard compliance and appropriate claim for their products. more

    • Colanyl Violet RL 131

      Colanyl Violet RL 131 is a binder-free, aqueous pigment preparation based on nonionic and / or anionic wetting and dispersing agents and propylene glycol. The product has a pourable and pumpable consistency and is suitable for dosing machines. Because of the moderate durability, it is suitable for interior use only.  more

    • Colanyl White R 100

      Colanyl White R 100 is a aqueous, binder-free pigment preparation and manufactured without using alkyl phenol ethoxylated (APEO) additives. This pigment preparation is compatible with water-based decorative coatings. more

    • Colanyl White R 500

      Colanyl White R 500 is an aqueous binder-free pigment preparation manufactured without using alkyl phenol ethoxylated (APEO) additives. This aqueous pigment preparation is compatible with water-based low VOC and VOC-free decorative coatings.* * As defined in EU directive 2004/42/EC, annex II, phase II. VOC standards and regulations vary by location. Product specific VOC information is available to customers upon request. It is the responsibility of the coatings manufacturer to determine standard compliance and appropriate claim for their products. more

    • Colanyl Yellow 10G 131

      Colanyl Yellow 10G 131 is a binder-free, aqueous pigment preparation based on nonionic and / or anionic wetting and dispersing agents and propylene glycol. The product has a pourable and pumpable consistency and is suitable for dosing machines. Because of the moderate durability, it is suitable for interior use only. more

    • Colanyl Yellow 2GXD 130

      Colanyl Yellow 2GXD 130 is a binder-free, aqueous pigment preparation based on nonionic and / or anionic wetting and dispersing agents and propylene glycol. The product has a pourable and pumpable consistency and is suitable for dosing machines. Because of the moderate durability, it is suitable for interior use only. more

    • Colanyl Yellow 2GXD 500

      Colanyl Yellow 2GXD 500 is an aqueous binder-free pigment preparation manufactured without using alkyl phenol ethoxylated (APEO) additives. This aqueous pigment preparation is compatible with water-based low VOC and VOC-free decorative coatings.* * As defined in EU directive 2004/42/EC, annex II, phase II. VOC standards and regulations vary by location. Product specific VOC information is available to customers upon request. It is the responsibility of the coatings manufacturer to determine standard compliance and appropriate claim for their products. more

    • Colanyl Yellow 5GX 130

      Colanyl Yellow 5GX 130 is a binder-free, aqueous pigment preparation based on nonionic and / or anionic wetting and dispersing agents and propylene glycol. The product has a pourable and pumpable consistency and is suitable for dosing machines. Because of the moderate durability, it is suitable for interior use only. more

    • Colanyl Yellow 5GX 500

      Colanyl Yellow 5GX 500 is an aqueous binder-free pigment preparation manufactured without using alkyl phenol ethoxylated (APEO) additives. This aqueous pigment preparation is compatible with water-based low VOC and VOC-free decorative coatings.* * As defined in EU directive 2004/42/EC, annex II, phase II. VOC standards and regulations vary by location. Product specific VOC information is available to customers upon request. It is the responsibility of the coatings manufacturer to determine standard compliance and appropriate claim for their products. more

    • Colanyl Yellow FGL 132 VP3539

      Colanyl Yellow FGL 132 is a binder-free, aqueous pigment preparation based on nonionic and / or anionic wetting and dispersing agents and propylene glycol. The product has a pourable and pumpable consistency and is suitable for dosing machines. Because of the moderate durability, it is suitable for interior use only. Due to the VP status of this product, this is only a preliminary product data sheet. No upper or lower specification tolerances will apply. The relevant master standard for the coloristic evaluation is only preliminary and may change without prior notice. more

    • Colanyl Yellow FGL 500

      Colanyl Yellow FGL 500 is an aqueous binder-free pigment preparation manufactured without using alkyl phenol ethoxylated (APEO) additives. This aqueous pigment preparation is compatible with water-based low VOC and VOC-free decorative coatings.* * As defined in EU directive 2004/42/EC, annex II, phase II. VOC standards and regulations vary by location. Product specific VOC information is available to customers upon request. It is the responsibility of the coatings manufacturer to determine standard compliance and appropriate claim for their products. more

    • Colanyl Yellow G 132

      Colanyl Yellow G 132 is a binder-free, aqueous pigment preparation based on nonionic and / or anionic wetting and dispersing agents and propylene glycol. The product has a pourable and pumpable consistency and is suitable for dosing machines. Because of the moderate durability, it is suitable for interior use only. more

    • Colanyl Yellow G 500

      Colanyl Yellow G 500 is an aqueous binder-free pigment preparation manufactured without using alkyl phenol ethoxylated (APEO) additives. This aqueous pigment preparation is compatible with water-based low VOC and VOC-free decorative coatings.* * As defined in EU directive 2004/42/EC, annex II, phase II. VOC standards and regulations vary by location. Product specific VOC information is available to customers upon request. It is the responsibility of the coatings manufacturer to determine standard compliance and appropriate claim for their products. more

    • Colanyl Yellow H3G 130 VP3377

      Colanyl Yellow H3G 130 is a binder-free, aqueous pigment preparation based on nonionic and / or anionic wetting and dispersing agents and propylene glycol. The product has a pourable and pumpable consistency and is suitable for dosing machines. Because of its good durability, it can be used for interior and exterior use after adequate weathering tests. more

    • Colanyl Yellow H3G 500

      Colanyl Yellow H3G 500 is an aqueous binder-free pigment preparation manufactured without using alkyl phenol ethoxylated (APEO) additives. This aqueous pigment preparation is compatible with water-based low VOC and VOC-free decorative coatings.* * As defined in EU directive 2004/42/EC, annex II, phase II. VOC standards and regulations vary by location. Product specific VOC information is available to customers upon request. It is the responsibility of the coatings manufacturer to determine standard compliance and appropriate claim for their products. more

    • Colanyl Yellow HR 130

      Colanyl Yellow HR 130 is a binder-free, aqueous pigment preparation based on nonionic and / or anionic wetting and dispersing agents and propylene glycol. The product has a pourable and pumpable consistency and is suitable for dosing machines. Because of the moderate durability, it is suitable for interior use only. more

    • Colanyl Yellow HRD 131

      Colanyl Yellow HRD 131 is a binder-free, aqueous pigment preparation based on nonionic and / or anionic wetting and dispersing agents and propylene glycol. The product has a pourable and pumpable consistency and is suitable for dosing machines. Because of the moderate durability, it is suitable for interior use only. more

    • Colanyl Yellow HRD 500

      Colanyl Yellow HRD 500 is an aqueous binder-free pigment preparation manufactured without using alkyl phenol ethoxylated (APEO) additives. This aqueous pigment preparation is compatible with water-based low VOC and VOC-free decorative coatings.* * As defined in EU directive 2004/42/EC, annex II, phase II. VOC standards and regulations vary by location. Product specific VOC information is available to customers upon request. It is the responsibility of the coatings manufacturer to determine standard compliance and appropriate claim for their products. more

    • Hansa Brilliant Yellow 2GX 70 for Paints and Coatings

      Hansa Brilliant Yellow 2GX 70 is a yellow pigment with good fastness to light and weathering for air-drying paints. Very good hiding power as an organic pigment. As it has good rheological properties, it can be used even at high pigment concentrations (about 20 % relative to solid binder) without any effect on gloss. Eminently suitable for the production of intense opaque yellow shades for lead-free or low-lead paints. Not suitable for stoving enamels because of the high risk of blooming more

    • Hansa Brilliant Yellow 2GX 70-S

      Yellow pigment with good fastness to light and weathering for air-drying paints. Very good hiding power as an organic pigment. As it has good rheological properties, it can be used even at high pigment concentrations (about 20 % relative to solid binder) without any effect on gloss. Eminently suitable for the production of intense opaque yellow shades for lead-free or low-lead paints. This pigment has been stabilized to recrystallization thus the production of pigment concentrates is much more reliable and their shelf-life is better. Pigment is not suitable for stoving enamels because of the high risk of blooming. more

    • Hansa Brilliant Yellow 4GX for Paints and Coatings

      Hansa Brilliant Yellow 4GX is a green shade monoazo pigment. The shade is similar to Pigment Yellow 1 but with higher transparency and good light- and weather fastness properties. Recommended for paste inks as well as for solvent- and water based packaging gravure and flexographic printing inks. more

    • Hansa Brilliant Yellow 5GX

      Yellow pigment for air-drying paints with considerably higher tinctorial strength and a slightly greener shade than Hansa Yellow G grades which it can often replace to advantage. Because of the high risk of blooming it is not suitable for stoving enamels. more

    • Hansa Red 3B for Paints and Coatings

      Hansa Red 3B is a very blue shade opaque beta-Naphthol pigment. It is easy to disperse and exhibits good light- and weather fastness properties. Recommended for paste inks as well as for solvent- and water based packaging gravure and flexographic printing inks. more

    • Hansa Red B for Paints and Coatings

      Hansa Red B is a blue shade opaque beta-Naphthol pigment. It is easy to disperse and exhibits good light- and weather fastness properties. Recommended for paste inks as well as for solvent- and water based packaging gravure and flexographic printing inks. more

    • Hansa Red GG for Paints and Coatings

      Hansa Red GG is an opaque, yellow shade beta-Naphthol pigment. It is easy to disperse and exhibits good light- and weather fastness properties. Recommended for paste inks as well as for solvent- and water based packaging gravure and flexographic printing inks. more

    • Hansa Scarlet RNC for Paints and Coatings

      Hansa Scarlet RNC is a blue shade opaque beta-Naphthol pigment. It is easy to disperse and exhibits good light- and weather fastness properties. Recommended for paste inks as well as for solvent- and water based packaging gravure and flexographic printing inks. more

    • Hansa Yellow 10G 41 gran. for Paints and Coatings

      Hansa Yellow 10G 41 gran. is a very green shade and opaque monoazo pigment in granule form. In comparison to the powder type, the granule form is stronger with improved recrystallization stability. It exhibits good light- and weather fastness properties. Recommended for paste inks as well as for solvent- and water based packaging gravure and flexographic printing inks. more

    • Hansa Yellow 10G for Paints and Coatings

      Hansa Yellow 10G is a pigment with good fastness to light and weathering for air-drying paints. Because of its pure greenish shade it is particularly suitable for green mixtures. Owing to the high risk of blooming, it is not suitable for stoving enamels. more

    • Hansa Yellow G 02 for Paints and Coatings

      Hansa Yellow G 02 is a strong, opaque monoazo pigment. It exhibits good light- and weather fastness properties, is easy to disperse and has good stability to recrystallization. Recommended for paste inks as well as for solvent- and water based packaging gravure and flexographic printing inks. more

    • Hostaperm Blue A2R for Paints and Coatings

      Hostaperm Blue A2R is a strong, red shade alpha-copper phthalocyanine pigment with the outstanding fastness properties of this group of pigments. more

    • Hostaperm Blue A4R

      Reddish blue pigment stable to aromatic solvents with the outstanding fastness properties of this group of pigments. In shade it is distinctly redder and slightly purer than Hostaperm Blue A2R. more

    • Hostaperm Blue AFL for Paints and Coatings

      Hostaperm Blue AFL is a red shade, alpha-copper phthalocyanine pigment with the outstanding fastness properties of this group of pigments. It exhibits good flocculation stability. more

    • Hostaperm Blue B4G for Paints and Coatings

      Hostaperm Blue B4G is a transparent, beta-copper phthalocyanine blue pigment with the outstanding fastness properties of this group of pigments. Hostaperm Blue B4G is distinctly greener and slightly purer than Hostaperm Blue B2G. more

    • Hostaperm Green GNX

      Hostaperm Green GNX is a green pigment stable to aromatic solvents with the outstanding fastness properties of this group of pigments. Hostaperm Green GNX is slightly bluer than Hostaperm Green GG 01 more

    • Hostaperm Orange GR for Paints and Coatings

      Hostaperm Orange GR is a strong and very brillant perinone orange pigment with very good fastness, a very pure shade and high tinctorial strength. more

    • Hostaperm Pink E for Paints and Coatings

      Hostaperm Pink E is a blue shade quinacridone pigment with high tinctorial strength and the outstanding fastness properties of this group of pigments. more

    • Hostaperm Pink E-EDW VP 3907

      Hostaperm Pink E-EDW VP 3907 is an easily dispersible pigment designed for water based pigment dispersions which are used in decorative paints. The pigment is surface modified with a highly efficient and widely compatible additive. Optimum tinting strength can be achieved in relatively short time using a dissolver and suitable dispersing agents. The simplified dispersion process that does not include a bead mill results in a cost efficient manufacturing of pigment dispersions. Furthermore dispersions made with Hostaperm Pink E-EDW VP 3907 can be used to tint the new generation of low VOC decorative paints.* * As defined in EU directive 2004/42/EC, annex II, phase II. VOC standards and regulations vary by location. Product specific VOC information is available to customers upon request. It is the responsibility of the coatings manufacturer to determine standard compliance and appropriate claim for their products.  For more details see our Innovation Spotlight video . more

    • Hostaperm Pink E-WD

      Hostaperm Pink E-WE is a specially developed version of Hostaperm Pink E for use in waterborne preparations and tinting systems. Besides high tinctorial strength it is noted for its pure yellowish shade. In addition it offers very good light and weathering fastness and outstanding dispersion stability. more

    • Hostaperm Red D2G 70

      Hostaperm Red D2G 70 is a brillant red pigment with excellent durability and good opacity. more

    • Hostaperm Red D3G 70

      Hostaperm Red D3G 70 is a brillant red pigment with very good durability, high color strength and very good opacity. more

    • Hostaperm Red D3G 70-EDW VP 3931

      Hostaperm Red D3G 70-EDW VP 3931 is an easily dispersible pigment designed for water based pigment dispersions which are used in decorative paints. The pigment is surface modified with a highly efficient and widely compatible additive. Optimum tinting strength can be achieved in relatively short time using a dissolver and suitable dispersing agents. The simplified dispersion process that does not include a bead mill results in a cost efficient manufacturing of pigment dispersions. Furthermore dispersions made with Hostaperm Red D3G 70-EDW VP 3931 can be used to tint the new generation of low VOC decorative paints.* * As defined in EU directive 2004/42/EC, annex II, phase II. VOC standards and regulations vary by location. Product specific VOC information is available to customers upon request. It is the responsibility of the coatings manufacturer to determine standard compliance and appropriate claim for their products.  For more details see our Innovation Spotlight video . more

    • Hostaperm Red Violet ER 02 for Paints and Coatings

      Hostaperm Red Violet ER 02 is a quinacridone pigment with the outstanding fastness properties of this group of pigments. more

    • Hostaperm Scarlet GO for Paints and Coatings

      Brilliant red pigment with outstanding fastness to light and weathering even in reductions. It can consequently be used in a wide range of concentrations.It is one ot the most lightfast and weather-resitant red pigments, Its fastness to overpainting is not quite perfect in some stoving systems. more

    • Hostaperm Scarlet GO-EDW VP 3894

      Hostaperm Scarlet GO-EDW VP 3894 is an easily dispersible pigment designed for water based pigment dispersions which are used in decorative paints. The pigment is surface modified with a highly efficient and widely compatible additive. Optimum tinting strength can be achieved in relatively short time using a dissolver and suitable dispersing agents. The simplified dispersion process that does not include a bead mill results in a cost efficient manufacturing of pigment dispersions. Furthermore dispersions made with Hostaperm Scarlet GO-EDW VP 3894 can be used to tint the new generation of low VOC decorative paints.* * As defined in EU directive 2004/42/EC, annex II, phase II. VOC standards and regulations vary by location. Product specific VOC information is available to customers upon request. It is the responsibility of the coatings manufacturer to determine standard compliance and appropriate claim for their products.  For more details see our Innovation Spotlight video . more

    • Hostaperm Violet BL 01

      Reddish, pure violet pigment with outstanding color strength. Violet BL 01 provides very good fastness properties and is recommended for all paint systems and in all fields of paint application more

    • Hostaperm Violet RL spec. for Paints and Coatings

      Hostaperm Violet RL spec. is a blue shade, very strong dioxazine pigment with the outstanding fastness properties of this group of pigments..Violet RL special is highly recommended as shading pigment to give a redder hue to phthalocyanine blue based solid- as well as effectshade paints. more

    • Hostaperm Yellow H3G for Paints and Coatings

      Pigment with a medium yellow shade and outstanding fastness to light and weathering. Because of its excellent fastness, it is suitable for use in all concentration ranges down to very pale pastel shades and as a shading pigment. more

    • Hostaperm Yellow H4G 70

      Modified version of Hostaperm Yellow H4G with considerably better opacity and distinctly improved flow properties with a lighter and cleaner full shade. Its improved rheological characteristics contribute to increase production eco- nomies by permitting for higher pigment loading in mill base without adversely affecting the gloss. more

    • Hostaperm Yellow H4G for Paints and Coatings

      Hostaperm Yellow H4G is a green shade, very opaque benzimidazolone pigment with excellent light, weather and solvent fastness properties as well as high heat stability. Recommended for paste inks as well as for solvent- and water based packaging gravure and flexographic printing inks more

    • Hostaperm Yellow H5G

      Greenish yellow pigment with high purity an excellent color strength. Noted for high heat stability and outstanding solvent fastness, recommended both for water borne and solvent borne OEM and refinish systems. With its outstanding weathering fastness and its semi-transparent full shade H5G is suitable for solid shades as well as for effect shades in the yellow, orange and green range. more

    • Hostaperm Yellow H6G for Paints and Coatings

      Hostaperm Yellow H6G is a green shade, opaque benzimidazolone pigment with excellent light, weather and solvent fastness properties as well as high heat stability. Recommended for paste inks as well as for solvent- and water based packaging gravure and flexographic printing inks. more

    • Hostatint Black A-N 100

      Hostatint Black A-N 100 is a solvent-containing pigment preparation based on a carrier resin (aldehyde resin) that was developed specially for industrial paint applications. more

    • Hostatint Black GR 30

      Hostatint Black GR 30 is a aqueous, binder-free pigment preparation and manufactured without using alkyl phenol ethoxylated (APEO) additives. This multipurpose pigment preparation is compatible with water-based and solvent-based decorative coatings. more

    • Hostatint Black GR 500

      Hostatint Black GR 500 is an aqueous, binder-free pigment preparation and manufactured without using alkyl phenol ethoxylated (APEO) additives. This multipurpose pigment preparation is compatible with water-based and solvent-based decorative coatings, especially modern low VOC decorative coatings.* * As defined in EU directive 2004/42/EC, annex II, phase II. VOC standards and regulations vary by location. Product specific VOC information is available to customers upon request. It is the responsibility of the coatings manufacturer to determine standard compliance and appropriate claim for their products. more

    • Hostatint Black GR-T 500 VP 3976

      Hostatint Black GR 500-T VP 3976 is an aqueous, binder-free pigment preparation and manufactured without using alkyl phenol ethoxylated (APEO) additives. This multipurpose pigment preparation is compatible with water-based and solvent-based decorative coatings, especially modern low VOC decorative coatings* * As defined in EU directive 2004/42/EC, annex II, phase II. VOC standards and regulations vary by location. Product specific VOC information is available to customers upon request. It is the responsibility of the coatings manufacturer to determine standard compliance and appropriate claim for their products. more

    • Hostatint Blue A-BG 100

      Hostatint Blue A-BG 100 is a solvent-containing pigment preparation based on a carrier resin (aldehyde resin) that was developed specially for industrial paint applications. more

    • Hostatint Extender CC 500

      Hostatint Extender CC 500 is an aqueous, binder-free pigment preparation and manufactured without using alkyl phenol ethoxylated (APEO) additives. This multipurpose pigment preparation is compatible with water-based and solvent-based decorative coatings, especially modern low VOC decorative coatings.* * As defined in EU directive 2004/42/EC, annex II, phase II. VOC standards and regulations vary by location. Product specific VOC information is available to customers upon request. It is the responsibility of the coatings manufacturer to determine standard compliance and appropriate claim for their products. more

    • Hostatint Orange A-HLD 100

      Hostatint Orange A-HLD 100 is a solvent-containing pigment preparation based on a carrier resin (aldehyde resin) that was developed specially for industrial paint applications. more

    • Hostatint Orange GR 500

      Hostatint Orange GR 500 is an aqueous, binder-free pigment preparation and manufactured without using alkyl phenol ethoxylated (APEO) additives. This multipurpose pigment preparation is compatible with water-based and solvent-based decorative coatings, especially modern low VOC decorative coatings.* * As defined in EU directive 2004/42/EC, annex II, phase II. VOC standards and regulations vary by location. Product specific VOC information is available to customers upon request. It is the responsibility of the coatings manufacturer to determine standard compliance and appropriate claim for their products. more

    • Hostatint Oxide Orange Z 500 VP 6094

      Hostatint Oxide Orange Z 500 VP 6094 is an aqueous, binder-free pigment preparation and manufactured without using alkyl phenol ethoxylated (APEO) additives. This multipurpose pigment preparation is compatible with water-based and solvent-based decorative coatings, especially modern low VOC decorative coatings.* * As defined in EU directive 2004/42/EC, annex II, phase II. VOC standards and regulations vary by location. Product specific VOC information is available to customers upon request. It is the responsibility of the coatings manufacturer to determine standard compliance and appropriate claim for their products. more

    • Hostatint Oxide Red A-B 100

      Hostatint Oxide Red A-B 100 is a solvent-containing pigment preparation based on a carrier resin (aldehyde resin) that was developed specially for industrial paint applications. more

    • Hostatint Oxide Yellow A-BV 100

      Hostatint Oxide Yellow A-BV 100 is a solvent-containing pigment preparation based on a carrier resin (aldehyde resin) that was developed specially for industrial paint applications. more

    • Hostatint Oxide Yellow A-CR 100

      Hostatint Oxide Yellow A-CR 100 is a solvent-containing pigment preparation based on a carrier resin (aldehyde resin) that was developed specially for industrial paint applications. more

    • Hostatint Oxide Yellow A-R 100

      Hostatint Oxide Yellow A-R 100 is a solvent-containing pigment preparation based on a carrier resin (aldehyde resin) that was developed specially for industrial paint applications. more

    • Hostatint Red A-F3RKD 100

      Hostatint Red A-F3RKD 100 is a solvent-containing pigment preparation based on a carrier resin (aldehyde resin) that was developed specially for industrial paint applications. more

    • Hostatint Violet A-RL 100

      Hostatint Violet A-RL 100 is a solvent-containing pigment preparation based on a carrier resin (aldehyde resin) that was developed specially for industrial paint applications. more

    • Hostatint White A-R 100

      Hostatint Whtie A-R 100 is a solvent-containing pigment preparation based on a carrier resin (aldehyde resin) that was developed specially for industrial paint applications. more

    • Hostatint Yellow 12G 500

      Hostatint Yellow 12G 500 is an aqueous, binder-free pigment preparation and manufactured without using alkyl phenol ethoxylated (APEO) additives. This multipurpose pigment preparation is compatible with water-based and solvent-based decorative coatings, especially modern low VOC decorative coatings.* * As defined in EU directive 2004/42/EC, annex II, phase II. VOC standards and regulations vary by location. Product specific VOC information is available to customers upon request. It is the responsibility of the coatings manufacturer to determine standard compliance and appropriate claim for their products. more

    • Hostatint Yellow A-F2G 100

      Hostatint Yellow A-F2G 100 is a solvent-containing pigment preparation based on a carrier resin (aldehyde resin) that was developed specially for industrial paint applications. more

    • Hostatint Yellow A-H3G 100

      Hostatint Yellow A-H3G 100 is a solvent-containing pigment preparation based on a carrier resin (aldehyde resin) that was developed specially for industrial paint applications. more

    • Hostatint Yellow A-HRD 100

      Hostatint Yellow A-HRD 100 is a solvent-containing pigment preparation based on a carrier resin (aldehyde resin) that was developed specially for industrial paint applications. more

    • Novoperm Orange HL 70 for Paints and Coatings

      Novoperm Orange HL 70 is an opaque red shade benzimidazolone pigment. more

    • Novoperm Orange HL 70-EDW VP 3965

      Novoperm Orange HL 70-EDW VP 3965 is an easily dispersible pigment designed for water based pigment dispersions which are used in decorative paints. The pigment is surface modified with a highly efficient and widely compatible additive. Optimum tinting strength can be achieved in relatively short time using a dissolver and suitable dispersing agents. The simplified dispersion process that does not include a bead mill results in a cost efficient manufacturing of pigment dispersions. Furthermore the dispersion made with Novoperm Orange HL 70-EDW VP 3965 can be used to tint the new generation of low VOC decorative paints.* * As defined in EU directive 2004/42/EC, annex II, phase II. VOC standards and regulations vary by location. Product specific VOC information is available to customers upon request. It is the responsibility of the coatings manufacturer to determine standard compliance and appropriate claim for their products.  For more details see our Innovation Spotlight video . more

    • Novoperm Orange HL for Paints and Coatings

      Orange pigment with very good all around fastness for all paint systems. more

    • Novoperm Red HF3S 70

      Novoperm Red HF3S 70 is a brilliant, yellowish red pigment with very good fastness to light and weathering in deep shades. It possesses very good rheological properties, high gloss and good opacity and is mainly used for lead-free, pure red shades in the automotive and industrial paints sector. more

    • Novoperm Red HF3S for Paints and Coatings

      Novoperm Red HF3S is a brilliant yellow shade, semi transparent Naphthol AS pigment. It exhibits excellent overall fastness properties. more

    • Novoperm Yellow FGL for Paints and Coatings

      Novoperm Yellow FGL is a mid shade monoazo pigment, similar to Pigment Yellow 1 grades, but with much better fastness properties and good heat stability. more

    • Novoperm Yellow HR 70 for Paints and Coatings

      Novoperm Yellow HR 70 is a strong, red shade, highly opaque diarylide yellow pigment. more

    • Novoperm Yellow HR for Paints and Coatings

      Novoperm Yellow HR is a red shade diarylide yellow pigment with good allround fastness properties. more

    • Permanent Bordeaux FGR for Paints and Coatings

      Permanent Bordeaux FGR is a blue shade Naphthol AS pigment. It exhibits good light fastness and moderate solvent fastnesses properties. more

    • Permanent Bordeaux FRR for Paints and Coatings

      Deep, bright bordeaux red mainly for air-drying paints. Because of the risk of blooming at low and medium concentrations, it should be used in stoving enamels only for full shades at higher concentrations after preliminary trials. If it is exposed to aggressive solvents, especially ketones, or in the presence of talcum, the crystal modification can change, causing a severe change in shade. more

    • Permanent Orange 2RLD 71 for Paints and Coatings

      Permanent Orange 2RLD 71 is a very opaque, pure orange pigment with very good weather fastness in medium and saturated colour shades. For the matching of lead-free orange shades with good hiding power. more

    • Permanent Red FGR 02 for Paints and Coatings

      Signal red pigment with very good fastness to light and weathering even in medium reductions; therefore an ideal alternative to toluidine red pigments when their fastness properties are not adequate. Provided the risk of blooming is observed it can be used, after the appropriate preliminary trials, in full shades for stoving enamels. Permanent Red FGR 02 has a darker, more transparent full shade in air-drying paints and has up to 10 % greater tinctorial strength than Permanent Red FGR. In alkyd/melamine resin stoving enamels on the other hand the coloristic differences are minimal. more

    • Permanent Red FGR 70 for Paints and Coatings

      Slightly higher opacity and considerably better rheological properties at higher pigment concentrations than Permanent Red FGR and therefore of particular interest for opaque full shades in the signal red range. Slightly lower tinctorial strength in reductions with titanium dioxide. Fastness properties virtually the same. more

    • Permanent Red FGR for Paints and Coatings

      Signal red pigment with very good fastness to light and weathering even in medium reductions; therefore an ideal alternative to toluidine red pigments when their fastness properties are not adequate. Provided the risk of blooming is observed it can be used, after the appropriate preliminary trials, in full shades for stoving enamels. more

    • Sanolin Blue AE 90

      Sanolin Blue AE 90 is a water soluble anionic dye. Suitable for cosmetics, stationery, cleaning agents, polishes, fertilizers and crop protection. Sanolin Blue AE 90 meets the requirements for cosmetic ingredients in EU (CI 42090). more

  • Products

    • Hostaperm Blue A2R for Paints and Coatings

      Hostaperm Blue A2R is a strong, red shade alpha-copper phthalocyanine pigment with the outstanding fastness properties of this group of pigments. more

    • Hostaperm Blue A4R

      Reddish blue pigment stable to aromatic solvents with the outstanding fastness properties of this group of pigments. In shade it is distinctly redder and slightly purer than Hostaperm Blue A2R. more

    • Hostaperm Blue AFL for Paints and Coatings

      Hostaperm Blue AFL is a red shade, alpha-copper phthalocyanine pigment with the outstanding fastness properties of this group of pigments. It exhibits good flocculation stability. more

    • Hostaperm Blue B4G for Paints and Coatings

      Hostaperm Blue B4G is a transparent, beta-copper phthalocyanine blue pigment with the outstanding fastness properties of this group of pigments. Hostaperm Blue B4G is distinctly greener and slightly purer than Hostaperm Blue B2G. more

    • Hostaperm Blue BT-617-D

      Hostaperm Blue BT-617-D is a greenish blue pigment stabilized against flocculation with the outstanding fastness properties of this group of pigments. Hostaperm Blue BT-617-D is slightly redder in reduction and somewhat more opaque in full shade than Hostaperm Blue BFL. more

    • Hostaperm Blue BT-627-D

      Greenish blue pigment stabilized against flocculation with the outstanding fastness properties of this group of pigments. Hostaperm Blue BT-617-D is slightly redder in reduction and somewhat more opaque in full shade than Hostaperm Blue BFL. Can be used in solid colors and in metallic colors in a very wide range of concentrations. more

    • Hostaperm Blue BT-728-D

      Hostaperm Blue BT-728-D is a greenish tetrachloro-Cu-phthalocyanine pigment. When compared with the common Pigment Blue 15:1 grades Hostaperm Blue BT-728-D is distinguished by its distinctly greener shade and, in metallic shades, by a greener color flop, which is not achievable with any other phthalocyanine blue grades. more

    • Hostaperm Blue BT-729-D

      Hostaperm Blue BT-729-D is a greenish tetrachloro-Cu-phthalocyanine pigment. When compared with the common Pigment Blue 15:1 grades Hostaperm Blue BT-729-D is distinguished by its distinctly greener shade and, in metallic shades, by a greener color flop, which is not achievable with any other phthalocyanine blue grades. more

    • Hostaperm Brown HFR 01 for Paints and Coatings

      Hostaperm Brown HFR 01 is a dark brown, very transparent benzimidazolone pigment with excellent light-, weather- and solvent fastness properties as well as high heat stability. more

    • Hostaperm Green GNX

      Hostaperm Green GNX is a green pigment stable to aromatic solvents with the outstanding fastness properties of this group of pigments. Hostaperm Green GNX is slightly bluer than Hostaperm Green GG 01 more

    • Hostaperm Orange GR for Paints and Coatings

      Hostaperm Orange GR is a strong and very brillant perinone orange pigment with very good fastness, a very pure shade and high tinctorial strength. more

    • Hostaperm Pink E for Paints and Coatings

      Hostaperm Pink E is a blue shade quinacridone pigment with high tinctorial strength and the outstanding fastness properties of this group of pigments. more

    • Hostaperm Pink E transp. 01

      Hostaperm Pink E transp. 01 is a transparent, purer version of Pigment Red 122. It has higher tinctorial strength and is somewhat bluer than Hostaperm Pink E. In most paint binders it possesses very good flocculation stability, good rheological characteristics and good gloss. more

    • Hostaperm Pink EB transp.

      Hostaperm Pink EB transp. is a highly transparent, pure, bluish version of Pigment Red 122. It has markedly higher tinctorial strength and is markedly bluer than Hostaperm Pink E. It has very good flocculation stability, good flowability and good gloss in most paint binders. more

    • Hostaperm Red D2G 70

      Hostaperm Red D2G 70 is a brillant red pigment with excellent durability and good opacity. more

    • Hostaperm Red D3G 70

      Hostaperm Red D3G 70 is a brillant red pigment with very good durability, high color strength and very good opacity. more

    • Hostaperm Red E2B 70 for Paints and Coatings

      Hostaperm Red E2B 70 is a yellow shade, brillant and very opaque quinacridone pigment with the outstanding fastness properties of this group of pigments. Chemically and crystallographically identical to Hostaperm Red E3B. Differs from this in its higher covering power, better rheological properties, easier dispersibility, distinctly improved flocculation stability and, coloristically, by a yellower purer shade both in full tone and reductions, and about 10 % higher tinctorial strength. Because of the good flocculation stability a haze-free high gloss is obtained in paints even at high pigment concentrations. more

    • Hostaperm Red E3B for Paints and Coatings

      Hostaperm Red E3B is a very opaque, yellow shade quinacridone pigment with the best fastness properties of this group of pigments. It is substantially more opaque and slightly yellower than Hostaperm Red E5B 02, which is crystallographically and chemically identical. Because of its outstanding fastness properties, it can be used in a wide range of concentrations, i. e. both in full shades and as a shading component. It gives brilliant yellowish reds when used in combination with opaque organic and inorganic orange pigments. more

    • Hostaperm Red P2GL-WD

      Hostaperm Red P2GL-WD is a highly transparent, yellowish, pure red pigment with outstanding light and weathering fastness. more

    • Hostaperm Red Violet ER 02 for Paints and Coatings

      Hostaperm Red Violet ER 02 is a quinacridone pigment with the outstanding fastness properties of this group of pigments. more

    • Hostaperm Scarlet GO transp.

      Transparent version of Hostaperm Scarlet GO with very similar fastness properties. Distincly greater tinctorial strength in some paint systems. Particulary recommended for metallic paints. more

    • Hostaperm Violet BL 01

      Reddish, pure violet pigment with outstanding color strength. Violet BL 01 provides very good fastness properties and is recommended for all paint systems and in all fields of paint application more

    • Hostaperm Violet RL spec. for Paints and Coatings

      Hostaperm Violet RL spec. is a blue shade, very strong dioxazine pigment with the outstanding fastness properties of this group of pigments..Violet RL special is highly recommended as shading pigment to give a redder hue to phthalocyanine blue based solid- as well as effectshade paints. more

    • Hostaperm Violet RL-NF

      Surface-treated version of Hostaperm Violet RL special with excellent rheological properties and high flocculation stability in most solvent-based binders. Fastness properties and fields of application are the same as for Hostaperm Violet RL special. more

    • Hostaperm Yellow H3G for Paints and Coatings

      Pigment with a medium yellow shade and outstanding fastness to light and weathering. Because of its excellent fastness, it is suitable for use in all concentration ranges down to very pale pastel shades and as a shading pigment. more

    • Hostaperm Yellow H4G 70

      Modified version of Hostaperm Yellow H4G with considerably better opacity and distinctly improved flow properties with a lighter and cleaner full shade. Its improved rheological characteristics contribute to increase production eco- nomies by permitting for higher pigment loading in mill base without adversely affecting the gloss. more

    • Hostaperm Yellow H4G for Paints and Coatings

      Hostaperm Yellow H4G is a green shade, very opaque benzimidazolone pigment with excellent light, weather and solvent fastness properties as well as high heat stability. Recommended for paste inks as well as for solvent- and water based packaging gravure and flexographic printing inks more

    • Hostaperm Yellow H5G

      Greenish yellow pigment with high purity an excellent color strength. Noted for high heat stability and outstanding solvent fastness, recommended both for water borne and solvent borne OEM and refinish systems. With its outstanding weathering fastness and its semi-transparent full shade H5G is suitable for solid shades as well as for effect shades in the yellow, orange and green range. more

    • Hostaperm Yellow H6G for Paints and Coatings

      Hostaperm Yellow H6G is a green shade, opaque benzimidazolone pigment with excellent light, weather and solvent fastness properties as well as high heat stability. Recommended for paste inks as well as for solvent- and water based packaging gravure and flexographic printing inks. more

    • Novoperm Orange HL 70 for Paints and Coatings

      Novoperm Orange HL 70 is an opaque red shade benzimidazolone pigment. more

    • Novoperm Red F2RK 70 for Paints and Coatings

      Novoperm Red F2RK 70 is a pure, yellowish and highly opaque Naphthol AS pigment. more

    • Novoperm Yellow M2R 70

      Novoperm Yellow M2R 70 is a reddish yellow pigment with excellent fastness to light and weathering, especially in deep shades. Very good opacity for an organic pigment. As it has very good flow properties in paints, it can also be used at high pigment concentrations (about 25 % pigment relative to solid binder) without affecting the gloss. Eminently suitable for the production of intense opaque yellow shades for lead-free or low-lead paints. It should be borne in mind that the resistance to very strong alkalis is in some binder systems unsatisfactory. more

    • PV Fast Yellow H3R

      PV Fast Yellow H3R is a reddish yellow pigment with excellent light fastness and heat resistance. It can also be used as shading component. more

  • Products

    • Hostaperm Blue A2R for Paints and Coatings

      Hostaperm Blue A2R is a strong, red shade alpha-copper phthalocyanine pigment with the outstanding fastness properties of this group of pigments. more

    • Hostaperm Blue A4R

      Reddish blue pigment stable to aromatic solvents with the outstanding fastness properties of this group of pigments. In shade it is distinctly redder and slightly purer than Hostaperm Blue A2R. more

    • Hostaperm Blue AFL for Paints and Coatings

      Hostaperm Blue AFL is a red shade, alpha-copper phthalocyanine pigment with the outstanding fastness properties of this group of pigments. It exhibits good flocculation stability. more

    • Hostaperm Blue B4G for Paints and Coatings

      Hostaperm Blue B4G is a transparent, beta-copper phthalocyanine blue pigment with the outstanding fastness properties of this group of pigments. Hostaperm Blue B4G is distinctly greener and slightly purer than Hostaperm Blue B2G. more

    • Hostaperm Blue BT-617-D

      Hostaperm Blue BT-617-D is a greenish blue pigment stabilized against flocculation with the outstanding fastness properties of this group of pigments. Hostaperm Blue BT-617-D is slightly redder in reduction and somewhat more opaque in full shade than Hostaperm Blue BFL. more

    • Hostaperm Blue BT-627-D

      Greenish blue pigment stabilized against flocculation with the outstanding fastness properties of this group of pigments. Hostaperm Blue BT-617-D is slightly redder in reduction and somewhat more opaque in full shade than Hostaperm Blue BFL. Can be used in solid colors and in metallic colors in a very wide range of concentrations. more

    • Hostaperm Blue BT-728-D

      Hostaperm Blue BT-728-D is a greenish tetrachloro-Cu-phthalocyanine pigment. When compared with the common Pigment Blue 15:1 grades Hostaperm Blue BT-728-D is distinguished by its distinctly greener shade and, in metallic shades, by a greener color flop, which is not achievable with any other phthalocyanine blue grades. more

    • Hostaperm Blue BT-729-D

      Hostaperm Blue BT-729-D is a greenish tetrachloro-Cu-phthalocyanine pigment. When compared with the common Pigment Blue 15:1 grades Hostaperm Blue BT-729-D is distinguished by its distinctly greener shade and, in metallic shades, by a greener color flop, which is not achievable with any other phthalocyanine blue grades. more

    • Hostaperm Brown HFR 01 for Paints and Coatings

      Hostaperm Brown HFR 01 is a dark brown, very transparent benzimidazolone pigment with excellent light-, weather- and solvent fastness properties as well as high heat stability. more

    • Hostaperm Green GNX

      Hostaperm Green GNX is a green pigment stable to aromatic solvents with the outstanding fastness properties of this group of pigments. Hostaperm Green GNX is slightly bluer than Hostaperm Green GG 01 more

    • Hostaperm Orange GR for Paints and Coatings

      Hostaperm Orange GR is a strong and very brillant perinone orange pigment with very good fastness, a very pure shade and high tinctorial strength. more

    • Hostaperm Pink E for Paints and Coatings

      Hostaperm Pink E is a blue shade quinacridone pigment with high tinctorial strength and the outstanding fastness properties of this group of pigments. more

    • Hostaperm Pink E transp. 01

      Hostaperm Pink E transp. 01 is a transparent, purer version of Pigment Red 122. It has higher tinctorial strength and is somewhat bluer than Hostaperm Pink E. In most paint binders it possesses very good flocculation stability, good rheological characteristics and good gloss. more

    • Hostaperm Pink EB transp.

      Hostaperm Pink EB transp. is a highly transparent, pure, bluish version of Pigment Red 122. It has markedly higher tinctorial strength and is markedly bluer than Hostaperm Pink E. It has very good flocculation stability, good flowability and good gloss in most paint binders. more

    • Hostaperm Red D2G 70

      Hostaperm Red D2G 70 is a brillant red pigment with excellent durability and good opacity. more

    • Hostaperm Red D3G 70

      Hostaperm Red D3G 70 is a brillant red pigment with very good durability, high color strength and very good opacity. more

    • Hostaperm Red E2B 70 for Paints and Coatings

      Hostaperm Red E2B 70 is a yellow shade, brillant and very opaque quinacridone pigment with the outstanding fastness properties of this group of pigments. Chemically and crystallographically identical to Hostaperm Red E3B. Differs from this in its higher covering power, better rheological properties, easier dispersibility, distinctly improved flocculation stability and, coloristically, by a yellower purer shade both in full tone and reductions, and about 10 % higher tinctorial strength. Because of the good flocculation stability a haze-free high gloss is obtained in paints even at high pigment concentrations. more

    • Hostaperm Red E3B for Paints and Coatings

      Hostaperm Red E3B is a very opaque, yellow shade quinacridone pigment with the best fastness properties of this group of pigments. It is substantially more opaque and slightly yellower than Hostaperm Red E5B 02, which is crystallographically and chemically identical. Because of its outstanding fastness properties, it can be used in a wide range of concentrations, i. e. both in full shades and as a shading component. It gives brilliant yellowish reds when used in combination with opaque organic and inorganic orange pigments. more

    • Hostaperm Red P2GL-WD

      Hostaperm Red P2GL-WD is a highly transparent, yellowish, pure red pigment with outstanding light and weathering fastness. more

    • Hostaperm Red Violet ER 02 for Paints and Coatings

      Hostaperm Red Violet ER 02 is a quinacridone pigment with the outstanding fastness properties of this group of pigments. more

    • Hostaperm Scarlet GO transp.

      Transparent version of Hostaperm Scarlet GO with very similar fastness properties. Distincly greater tinctorial strength in some paint systems. Particulary recommended for metallic paints. more

    • Hostaperm Violet BL 01

      Reddish, pure violet pigment with outstanding color strength. Violet BL 01 provides very good fastness properties and is recommended for all paint systems and in all fields of paint application more

    • Hostaperm Violet RL spec. for Paints and Coatings

      Hostaperm Violet RL spec. is a blue shade, very strong dioxazine pigment with the outstanding fastness properties of this group of pigments..Violet RL special is highly recommended as shading pigment to give a redder hue to phthalocyanine blue based solid- as well as effectshade paints. more

    • Hostaperm Violet RL-NF

      Surface-treated version of Hostaperm Violet RL special with excellent rheological properties and high flocculation stability in most solvent-based binders. Fastness properties and fields of application are the same as for Hostaperm Violet RL special. more

    • Hostaperm Yellow H3G for Paints and Coatings

      Pigment with a medium yellow shade and outstanding fastness to light and weathering. Because of its excellent fastness, it is suitable for use in all concentration ranges down to very pale pastel shades and as a shading pigment. more

    • Hostaperm Yellow H4G 70

      Modified version of Hostaperm Yellow H4G with considerably better opacity and distinctly improved flow properties with a lighter and cleaner full shade. Its improved rheological characteristics contribute to increase production eco- nomies by permitting for higher pigment loading in mill base without adversely affecting the gloss. more

    • Hostaperm Yellow H4G for Paints and Coatings

      Hostaperm Yellow H4G is a green shade, very opaque benzimidazolone pigment with excellent light, weather and solvent fastness properties as well as high heat stability. Recommended for paste inks as well as for solvent- and water based packaging gravure and flexographic printing inks more

    • Hostaperm Yellow H4G-EDS VP 3620

      Easily dispersible (called ED) version of Hostaperm Yellow H4G for solvent-borne coating systems. These pigments are surface modified with a highly efficient and widely compatible dispersing additive; hence they can also be dispersed with a dissolver, provided that their mill bases have been suitably formulated. The dispersion of ED pigments does not require additional dispersant as they already contain the optimal amount of additive for the modification of their surfaces. The coloristic properties of Hostaperm Yellow H4G-EDS VP 3620 can differ from those of the conventional pigment as a result of their improved ease-of-dispersion. more

    • Hostaperm Yellow H5G

      Greenish yellow pigment with high purity an excellent color strength. Noted for high heat stability and outstanding solvent fastness, recommended both for water borne and solvent borne OEM and refinish systems. With its outstanding weathering fastness and its semi-transparent full shade H5G is suitable for solid shades as well as for effect shades in the yellow, orange and green range. more

    • Hostaperm Yellow H6G for Paints and Coatings

      Hostaperm Yellow H6G is a green shade, opaque benzimidazolone pigment with excellent light, weather and solvent fastness properties as well as high heat stability. Recommended for paste inks as well as for solvent- and water based packaging gravure and flexographic printing inks. more

    • Novoperm Orange H5G 70 for Paints and Coatings

      Novoperm Orange H5G 70 is a very opaque, pure, yellowish benzimidazolone pigment. more

    • Novoperm Orange HL 70 for Paints and Coatings

      Novoperm Orange HL 70 is an opaque red shade benzimidazolone pigment. more

    • Novoperm Orange HL 70-NF

      Novoperm Orange HL 70-NF is the surface-treated version of Novoperm Orange HL 70 with considerably improved rheological properties and dispersion stability, also in critical binder systems. Fields of application are the same as those of Novoperm Orange HL 70. Attention must be paid to the easier dispersibility of the pigment and hence its somewhat higher sensitivity to overmilling. Not recommended for water-borne paint systems. more

    • Novoperm Red F2RK 70 for Paints and Coatings

      Novoperm Red F2RK 70 is a pure, yellowish and highly opaque Naphthol AS pigment. more

    • Novoperm Red HF4B for Paints and Coatings

      Novoperm Red HF4B is a transparent blue shade Naphthol AS pigment. more

    • Novoperm Yellow 5GD 71 for Paints and Coatings

      Novoperm Yellow 5GD 71 is a very opaque and strong, green shade pigment. more

    • Novoperm Yellow H2G for Paints and Coatings

      Novoperm Yellow H2G is a mid shade benzimidazolone pigment. more

    • Novoperm Yellow HR 70 for Paints and Coatings

      Novoperm Yellow HR 70 is a strong, red shade, highly opaque diarylide yellow pigment. more

    • Novoperm Yellow M2R 70

      Novoperm Yellow M2R 70 is a reddish yellow pigment with excellent fastness to light and weathering, especially in deep shades. Very good opacity for an organic pigment. As it has very good flow properties in paints, it can also be used at high pigment concentrations (about 25 % pigment relative to solid binder) without affecting the gloss. Eminently suitable for the production of intense opaque yellow shades for lead-free or low-lead paints. It should be borne in mind that the resistance to very strong alkalis is in some binder systems unsatisfactory. more

    • PV Fast Yellow H3R

      PV Fast Yellow H3R is a reddish yellow pigment with excellent light fastness and heat resistance. It can also be used as shading component. more

  • Products

    • JMAC Composite PG

      JMAC Composite PG is a preservative active with antimicrobial properties that reduces the spread of bacteria over the long term. The attractiveness of JMAC’s antimicrobial protection is reinforced by its low toxicity, non-sensitizing performance and very low environmental impact. JMAC meets Ecolabel standards for use in paints and coatings. Paint and coatings manufacturers benefit from easy and economical formulation. The JMAC biocides are effective at very small ppm addition levels and offer low viscosity liquid dispersion. Safe handling is assured through the non-flammability, non-corrosive nature of JMAC. For In-can preservation, the excellent thermal and pH stability of JMAC biocides means they can be used in a wide range of industrial applications, such as polymer emulsions, paints, sealants and adhesives. more

    • JMAC LP 10

      JMAC LP 10 is a preservative active with antimicrobial properties that reduces the spread of bacteria over the long term. The attractiveness of JMAC’s antimicrobial protection is reinforced by its low toxicity, non-sensitizing performance and very low environmental impact. JMAC meets Ecolabel standards for use in paints and coatings. JMAC is also suitable for home care applications. more

    • JMAC S 10

      JMAC S 10 is a preservative active with antimicrobial properties that reduces the spread of bacteria over the long term. The attractiveness of JMAC’s antimicrobial protection is reinforced by its low toxicity, non-sensitizing performance and very low environmental impact. JMAC meets Ecolabel standards for use in paints and coatings. Paint and coatings manufacturers benefit from easy and economical formulation. The JMAC biocides are effective at very small ppm addition levels and offer low viscosity liquid dispersion. Safe handling is assured through the non-flammability, non-corrosive nature of JMAC. For In-can preservation, the excellent thermal and pH stability of JMAC biocides means they can be used in a wide range of industrial applications, such as polymer emulsions, paints, sealants and adhesives. more

    • Nipacide BIT 10 W

      Nipacide BIT 10 W is an in-can biocide based on BIT. Nipacide BIT 10 W is a light colour, 10% active, VOC free, water-based solution of 1,2-benzisothiazolinone. Nipacide BIT 10 W is a low toxicity biocide developed for the complete in-can protection of water-based products. Nipacide BIT 10 W is effective against a wide range of microorganisms including gram positive and gram negative bacteria, yeast and fungi. Nipacide BIT 10 W should be the biocide of choice for products with pH >8 and production temperatures of >40 C. more

    • Nipacide BIT 20

      Nipacide BIT 20 is an in-can biocide based on BIT. Nipacide BIT 20 is a glycol based solution; low toxicity biocide developed for the complete in-can protection of water based products. Nipacide BIT 20 is effective against a wide range of microorganisms including gram positive and gram negative bacteria, yeast and fungi.  Nipacide BIT 20 can be used over a wide pH and temperature range. Nipacide BIT 20 should be the biocide of choice for products with pH >8 and production temperatures of >40 C. more

    • Nipacide BIT AS 20

      Nipacide BIT AS 20 is an in-can biocide based on BIT. Nipacide BIT AS 20 is a stable, free flowing 20% aqueous dispersion of 1,2-benzisothiazolinone and is a low toxicity biocide developed for the complete in-can protection of water based products. Nipacide BIT AS 20 is effective against a wide range of microorganisms including gram positive and gram negative bacteria, yeast and fungi. Nipacide BIT AS 20 should be the biocide of choice for products with pH >8 and production temperatures of >40 C. more

    • Nipacide BK

      Nipacide BK is an in-can biocide basen on Hexahydrotriazine (HHT). Nipacide BK is an aqueous based low toxicity biocide developed for the complete in-can protection of water based products.  Nipacide BK is effective against a wide range of microorganisms including gram positive and gram negative bacteria, yeast and fungi. Nipacide BK can be used over a wide pH and temperature range. more

    • Nipacide CFX 2

      Nipacide CFX 2 is an in-can biocide based on formaldehyde + chloromethyl and methylisothiazolinone.  Nipacide CFX 2 is water-based low toxicity isothiazolinone/ formaldehyde donor biocide, developed for the complete in-can and head space protection of water-based products. Nipacide CFX 2 is effective against a wide range of microorganisms including gram positive and gram negative bacteria, yeast and fungi. When products are prone to surface contamination by fungi and head space protection is required, Nipacide CFX 2 should be the biocide of choice. Nipacide CFX 2 is effective against a wide range of spoilage organisms effective over a wide pH and temperature range. more

    • Nipacide CFX 3

      Nipacide CFX 3 is an in-can biocide based on formaldehyde + chloromethyl and methylisothiazolinone.  Nipacide CFX 3 is a water-based low toxicity isothiazolinone/ formaldehyde donor biocide, developed for the complete in-can and head space protection of water-based products. Nipacide CFX 3 is effective against a wide range of microorganisms including gram positive and gram negative bacteria, yeast and fungi. When products are prone to surface contamination by fungi and head space protection is required, Nipacide CFX 3 should be the biocide of choice. Nipacide CFX 3 is effective against a wide range of spoilage organisms effective over a wide pH and temperature range. more

    • Nipacide CFX 4

      Nipacide CFX 4 is an in-can biocide based on formaldehyde + chloromethyl and methylisothiazolinone.  Nipacide CFX 4 is a water-based low toxicity isothiazolinone/ formaldehyde donor biocide, developed for the complete in-can and head space protection of water-based products. Nipacide CFX 4 is effective against a wide range of microorganisms including gram positive and gram negative bacteria, yeast and fungi. When products are prone to surface contamination by fungi and head space protection is required, Nipacide CFX 4 should be the biocide of choice. Nipacide CFX 4 is effective against a wide range of spoilage organisms and pH stable up to pH 9 and temperature stable up to 40 °C. more

    • Nipacide CI

      Nipacide CI is an in-can biocide based on CMIT/MIT. Nipacide CI is a water based biocide, developed for the complete in-can protection of water based products including water based /Latex/PVA adhesives, PVA / Acrylic polymer emulsions, water based decorative paints, printing inks, metal working fluids and construction admixtures. Nipacide CI is effective against a wide range of microorganisms including gram positive and gram negative bacteria, yeast and fungi. Thermal and pH stability for Nipacide CI is a critical consideration and it should not be used for products with pH >8.5 or production temperatures of >40 °C. more

    • Nipacide CI 15

      Nipacide CI 15 is an in-can biocide based on CMIT/MIT. Nipacide CI 15 is a water based biocide, developed for the complete in-can protection of water based products including water based / Latex/PVA adhesives, PVA / acrylic polymer emulsions, water based decorative paints, printing inks, metal working fluids and construction admixtures. Nipacide CI is effective against a wide range of microorganisms including gram positive and gram negative bacteria, yeast and fungi. Thermal and pH stability for Nipacide CI is a critical consideration and it should not be used for products with pH >8.5 or production temperatures of >40 °C. more

    • Nipacide CI 15 MV

      Nipacide CI 15 MV is an in-can biocide based on CMIT/MIT. Nipacide CI 15 MW is a water-based, low toxicity biocide developed for the complete in-can protection of water based products including water based /Latex/PVA adhesives, PVA / Acrylic polymer emulsions, water based decorative paints, printing inks, metal working fluids and construction admixtures. Nipacide CI 15 MW is effective against a wide range of microorganisms including gram positive and gram negative bacteria, yeast and fungi. Thermal and pH stability for Nipacide CI 15 MW is a critical consideration and it should not be used for products with pH >8.5 or production temperatures of >40 °C. more

    • Nipacide FC

      Nipacide FC is an in-can biocide based on EMMD. more

    • Nipacide IPBC 10

      Nipacide IPBC 10 is an aqueous, dry-film fungicide based on iodopropylbutylcarbamate.  Nipacide IPBC is recommended for a wide range of applications, including water- and solvent-based paints, wood coatings and in some packaging system. more

    • Nipacide KBS

      Nipacide KBS is an in-can biocide based on bronopol + chloromethyl and methylisothiazolinone. Nipacide KBS is a aqueous, low toxicity biocide developed for the complete in-can protection of water based products. Nipacide KBS is effective against a wide range of microorganisms including gram positive and gram negative bacteria, yeast and fungi. It is effective over a pH range of 4 to pH 8 and temperature below 40 °C. more

    • Nipacide PX

      Effective and broad spectrum disinfectant more

    • Nipacide TBX

      Nipacide TBX is an in-can biocide based on benzisothiazolinone + triazine. Nipacide TBX is a low toxicity biocide intended for industrial use only as a microbiostat preservative for aqueous compositions such as adhesives or tackifiers, polymer emulsions and lattices, natural and synthetic thickeners, aqueous slurries, construction compounds, metal working fluids and paints & coatings. Nipacide TBX combines the outstanding stability of Nipacide BIT based biocides with the rapid kill of Nipacide BK. more

  • Products

    • REMAFIN

      Under the REMAFIN brand name, Clariant markets color masterbatches (color concentrates) specially formulated for use in polyolefin polymers, including high-density, low-density and linear low-density polyethylene (PE), and polypropylene (PP). These materials are commonly used in injection molding, blow molding, film extrusion and other plastics processes. more

    • RENOL

      Today’s demanding applications require the high-performance properties found in modern engineering polymers. To create the bright, durable and consistent colors that succeed in consumer marketplace, designers turn to RENOL masterbatches from Clariant. more

  • Color Filter

    Colorants for the display market
    With decades of experience in manufacturing colorants, Clariant serves the trend for increasing image quality in the display market with a range of specially developed color filter grade products. 

    We offer pigments and dyes that are used in mill base dispersions for Liquid-Crystal- and W-OLED displays and in E-paper applications. 

    For continuous product improvements, we combine our technical expertise, in-depth application know-how and access to our wide range of high quality colorants with close cooperation with customers. 

    We happily provide further information about our products for color filter application on direct request.

    Learn more
    To learn more about products for color filter applications, please get in contact with us

    avatar3

    Chris Patterson

    Contact Person

    +17043317789

    Request to Clariant

    Please enter your contact information so we are able to process your request. Thank you for your interest.

    Your Name

     

    Your Email

    Your position

    Your Company

    Country

    Phone

  • Products

    • Hostaperm Blue A2R for Printing

      Hostaperm Blue A2R is a strong, red shade alpha-copper phthalocyanine pigment with the outstanding fastness properties of this group of pigments. Recommended for paste inks as well as for solvent- and water based packaging gravure and flexographic printing inks. more

    • Hostaperm Blue B4G for Printing

      Hostaperm Blue B4G is a transparent, beta-copper phthalocyanine blue pigment with the outstanding fastness properties of this group of pigments. Recommended for all commonly used printing inks. In comparison to other P.B. 15:3 Hostaperm Blue B4G in many ink systems offers advantages in color strength, gloss and transparency. In offset inks Hostaperm Blue B4G exhibits excellent flow properties at high Laray- viscosity. more

    • Hostaperm Brown HFR 01 for Printing

      Hostaperm Brown HFR 01 is a dark brown, very transparent benzimidazolone pigment with excellent light-, weather- and solvent fastness properties as well as high heat stability. Recommended for paste inks as well as for solvent- and water based packaging gravure and flexographic printing inks. more

    • Hostaperm Orange GR for Printing

      Hostaperm Orange GR is a strong and very brillant perinone pigment with very good allround fastness properties and excellent light-, weather- and heat- stability properties. Recommended for special highquality printing inks. more

    • Hostaperm Pink E 02

      Hostaperm Pink E 02 is a very strong, transparent and blue shade quinacridone pigment with the outstanding fastness properties of this group of pigments. Recommended for paste inks and for solvent- and water based packaging gravure and flexographic printing inks.  more

    • Hostaperm Pink E for Printing

      Hostaperm Pink E is a blue shade quinacridone pigment with the outstanding fastness properties of this group of pigments. Recommended for paste inks and for solvent- and water based packaging gravure and flexographic printing inks. more

    • Hostaperm Red D3G 70

      Hostaperm Red D3G 70 is a brillant red pigment with very good durability, high color strength and very good opacity. more

    • Hostaperm Red E2B 70 for Printing

      Hostaperm Red E2B 70 is a yellow shade, brillant and very opaque quinacridone pigment with the outstanding fastness properties of this group of pigments. Recommended especially for high quality offset, silk screen and tin printing inks. more

    • Hostaperm Red E3B for Printing

      Hostaperm Red E3B is a very opaque, yellow shade quinacridone pigment with the best fastness properties of this group of pigments. Recommended especially for high quality offset, silk screen and tin printing inks. more

    • Hostaperm Red E5B 02 for Printing

      Hostaperm-Rot E5B 02 is a blue shade, very transparent quinacridone pigment with the outstanding fastness properties of this group of pigments. Recommended for paste inks as well as for solvent- and water based packaging gravure and flexographic printing inks. more

    • Hostaperm Red Violet ER 02 for Printing

      Hostaperm Red Violet ER 02 is a quinacridone pigment with the outstanding fastness properties of this group of pigments. Recommended for paste inks and for solvent- and water based packaging gravure and flexographic printing inks. more

    • Hostaperm Scarlet GO for Printing

      Hostaperm Scarlet GO is a brilliant yellow shade anthanthrone pigment with excellent light- and weather fastness properties. It belongs to the group of red pigments with the best light- and weather fastness properties. Recommended for paste inks and for solvent- and water based packaging gravure and flexographic printing inks.         more

    • Hostaperm Violet RL 02

      Hostaperm Violet RL 02 is a blue shade dioxazine pigment with high colur strength and the outstanding fastness properties of this group of pigments. Particularly suitable for the shading of the green shade phthalocyanine blue pigments. Recommended for paste inks and for solvent- and water based packaging gravure and flexographic printing inks. more

    • Hostaperm Yellow H3G for Printing

      Hostaperm Yellow H3G is a mid shade benzimidazolone pigment with excellent light, weather and solvent fastness properties as well as high heat stability. Recommended for high performance offset and tin printing inks as well as for water based packaging gravure and flexographic printing inks. more

    • Hostaperm Yellow H4G for Printing

      Hostaperm Yellow H4G is a green shade, very opaque benzimidazolone pigment with excellent light, weather and solvent fastness properties as well as high heat stability. Recommended for paste inks as well as for solvent- and water based packaging gravure and flexographic printing inks. more

    • Hostaperm Yellow H6G for Printing

      Hostaperm Yellow H6G is a green shade, opaque benzimidazolone pigment with excellent light, weather and solvent fastness properties as well as high heat stability. Recommended for paste inks as well as for solvent- and water based packaging gravure and flexographic printing inks. more

    • Hostaperm Yellow HN4G

      Hostaperm Yellow HN4G is a green shade Azo Nickel Complex pigment with very good lightfastness and overall fastness properties as well as excellent heat resistance. Pigment Yellow 150 is the established standard Colour Index for a green shade yellow to be used in waterbased decorative gravure printing inks. Therefore, Hostaperm Yellow HN4G is highly recommended for this kind of application. more

    • Novoperm Carmine HF3C

      Novoperm Carmine HF3C is a blue shade benzimidazolone pigment. It exhibits excellent overall fastness properties. One important application is in inks for decorative laminated papers. It is recommended for paste inks and for solvent- and water based packaging gravure and flexographic printing inks. more

    • Novoperm Orange H5G 70 for Printing

      Novoperm Orange H5G 70 is a very opaque, pure, yellowish benzimidazolone pigment. It exhibits excellent light- and weather fastness properties as well as good overall fastness properties. Recommended for all kinds of printing ink systems, especially screen printing inks. more

    • Novoperm Orange HL 70 for Printing

      Novoperm Orange HL 70 is an opaque red shade benzimidazolone pigment. It exhibits excellent light- and weather fastness properties as well as good overall fastness properties. Recommended for all kinds of printing ink systems, especially for screen printing inks. more

    • Novoperm Orange HL for Printing

      Novoperm Orange HL is a transparent, red shade benzimidazolone pigment. It exhibits excellent light- and weather fastness properties as well as good overall fastness properties. Recommended for paste inks and for solvent- and water based packaging gravure and flexographic printing inks. more

    • Novoperm Red F2RK 70 for Printing

      Novoperm Red F2RK 70 is a pure, yellowish and highly opaque Naphthol AS pigment. It exhibits excellent light- and weather fastness properties as well as good overall fastness properties. Recommended for paste inks and for solvent- and water based packaging gravure and flexographic printing inks. more

    • Novoperm Red F3RK 70 for Printing

      Novoperm Red F3RK 70 is a blue shade, brilliant and very opaque Naphthol AS pigment. It exhibits excellent light- and weather fastness properties as well as good overall fastness properties. more

    • Novoperm Red F5RK for Printing

      Novoperm Red F5RK is a very strong, blue shade and semi transparent Naphthol AS pigment. It exhibits excellent light- and weather fastness properties as well as good overall fastness properties. Recommended for paste inks and for solvent- and water based packaging gravure and flexographic printing inks. more

    • Novoperm Red HF2B 01

      Novoperm Red HF2B 01 is a mid shade, transparent benzimidazolone pigment. It exhibits excellent overall fastness properties. Recommended for paste inks and for solvent- and water based packaging gravure and flexographic printing inks.  more

    • Novoperm Red HF3S for Printing

      Novoperm Red HF3S is a brilliant yellow shade, semi transparent Naphthol AS pigment. It exhibits excellent overall fastness properties. Recommended for paste inks and for solvent- and water based packaging gravure and flexographic printing inks. more

    • Novoperm Red HF4B for Printing

      Novoperm Red HF4B is a transparent blue shade Naphthol AS pigment. It exhibits excellent overall fastness properties. Recommended for paste inks and for solvent- and water based packaging gravure and flexographic printing inks. more

    • Novoperm Red HFG

      Novoperm Red HFG is a transparent, very yellow shade Naphthol AS pigment. It exhibits excellent overall fastness properties. Recommended for paste inks and for solvent- and water based packaging gravure and flexographic printing inks. more

    • Novoperm Scarlet 4RF 01

      Novoperm Scarlet 4RF 01 is a brilliant, yellow shade disazo condensation pigment. It exhibits excellent overall fastness properties. Main field of application are printing inks for decorative laminate paper. It is recommended for paste inks and for solvent- and water based packaging gravure and flexographic printing inks. more

    • Novoperm Yellow 4G 01 for Printing

      Novoperm Yellow 4G 01 is a strong, green shade disazo pigment. It exhibits excellent overall fastness properties. Recommended for paste inks and for solvent- and water based packaging gravure and flexographic printing inks. more

    • Novoperm Yellow 5GD 71 for Printing

      Novoperm Yellow 5GD 71 is a very opaque and strong, green shade pigment. It exhibits excellent overall fastness properties as well as good rheological properties. Recommended for paste inks and for solvent- and water based packaging gravure and flexographic printing inks. more

    • Novoperm Yellow F2G for Printing

      Novoperm Yellow F2G is a strong, green shade benzimidazolone pigment. It exhibits excellent overall fastness properties as well as good rheological properties. Recommended for paste inks and for solvent- and water based packaging gravure and flexographic printing inks. more

    • Novoperm Yellow FGL for Printing

      Novoperm Yellow FGL is a mid shade monoazo pigment, similar to Pigment Yellow 1 grades, but with much better fastness properties and good heat stability. Recommended for paste inks and for solvent- and water based packaging gravure and flexographic printing inks. more

    • Novoperm Yellow H2G for Printing

      Novoperm Yellow H2G is a mid shade benzimidazolone pigment. It exhibits excellent light- and weather fastness properties as well as high heat stability. Recommended for paste inks and for solvent- and water based packaging gravure and flexographic printing inks. more

    • Novoperm Yellow H3R

      Novoperm Yellow H3R is a red shade Monoazo/Benzimidazolone pigment with excellent overall fastness properties, excellent lightfastness and heat resistance. Highly recommended for waterbased decorative gravure printing inks. more

    • Novoperm Yellow HR 70 for Printing

      Novoperm Yellow HR 70 is a strong, red shade, highly opaque diarylide yellow pigment. It exhibits excellent light- and weather fastness properties as well as good overall fastness properties. Recommended for all kinds of printing ink systems, especially for screen printing inks. more

    • Novoperm Yellow P-HG

      Novoperm Yellow P-HG is a green shade benzimidazolone pigment of the P-grade range with extremely low specific conductivity (< 0,2 mS/cm), especially recommended for solvent based packaging printing inks. It exhibits high colour strength, high gloss and high transparency with very good rheological and excellent fastness properties. It is used if the fastness properties of a Pigment Yellow 13 or Pigment Yellow 17 are not sufficient. more

    • Novoperm Yellow P-M3R

      Novoperm Yellow P-M3R is a red shade isoindoline pigment of the P-grade range with extremely low specific conductivity (< 0,2 mS/cm), especially recommended for solvent based packaging printing inks. It exhibits high colour strength, high gloss and high transparency with very good rheological and fastness properties, except the alkaline fastness, which is only fair. more

    • PV Fast Red BNP

      PV Fast Red BNP is a bluish red pigment with superior heat resistance and a wide range of applications including fibres, films and engineering polymers. It is suitable as a shading pigment. more

    • PV Fast Red D3G for Printing

      PV-Fast Red D3G is a mid-shade Diketo-pyrrolo-pyrrole- pigment with outstanding fastness properties of this group of pigments. Recommended for gravure printing inks for decorative laminated paper, for solvent and waterbased packaging gravure and flexographic printing inks as well as paste inks. more

    • PV Fast Yellow HG

      PV Fast Yellow HG is a greenish yellow pigment with excellent fastness properties for applications in a wide range of polymers. It is a replacement for cadmium, lead chromate and diarylide pigments. more

  • Products

    • Duasyn Acid Blue AE-SF 30 liquid

      Duasyn Acid Blue AE-SF 30 liquid is a water-based dye solution with specified salt content suitable for all waterbased inkjet systems, including writing inks. more

    • Duasyn Acid Yellow XX-SF liquid

      Duasyn Acid Yellow XX-SF liquid is a water-based dye solution with specified salt content. It is suitable for all waterbased inkjet ink systems. more

    • Duasyn Black A-RG

      Duasyn Black A-RG is a solvent soluble metal complex dye. It is suitable for special inks, woodstains, leather finishes, industrial paints and printing inks. more

    • Duasyn Black HEF-SF liquid

      Duasyn Black HEF-SF liquid is a water-based dye solution with specified salt content. It is suitable for all waterbased inkjet ink systems, including writing inks. more

    • Duasyn Brilliant Red F3B-SF liquid

      Duasyn Brilliant Red F3B-SF liquid  is a water-based dye solution. Recommended for all waterbased inkjet systems, including writing inks. more

    • Duasyn Yellow 3GF-SF liquid

      Duasyn Yellow 3GF-SF liquid is a water-based dye solution with specified salt content. Suitable for all waterbased inkjet ink systems, for the coloration of home care products and industrial cleaners as well as writing inks. more

    • Duasynjet Cyan FRL-SF liquid

      Duasynjet Cyan FRL-SF liquid is a water-based dye solution with specified salt content. It is suitable for all waterbased inkjet ink systems, including writing inks. more

    • Graphtol Carmine HF4C

      Graphtol Carmine HF4C is a bluish red pigment with good fastness properties. It is recommended for PVC, PE film and cable applications. more

    • Hansa Brilliant Yellow 5GX 03

      Hansa Brilliant Yellow 5GX 03 is a very strong, green shade monoazo yellow. The shade is similar to Pigment Yellow 1, but with higher colour strength, transparency and gloss. It also exhibits good light- and weather fastness properties. Recommended for paste inks as well as for solvent- and water based packaging gravure and flexographic printing inks. more

    • Hostajet Black O-PT

      Hostajet PT grades are aqueous pigment dispersion based on polymeric dispersants and inkjet quality pigments. Hostajet Black O-PT is suitable for waterbased inkjet systems. more

    • Hostajet Cyan BG-PT

      Hostajet PT grades are aqueous pigment dispersion based on polymeric dispersants and inkjet quality pigments. Hostajet Cyan BG-PT is suitable for water-based inkjet systems. more

    • Hostajet Green 8G-PT VP 5154

      Hostajet PT grades are aqueous pigment dispersion based on polymeric dispersants and inkjet quality pigments. Hostajet Green 8G-PT VP 5154 is suitable for waterbased inkjet systems. more

    • Hostajet Magenta E5B-PT VP3565

      Hostajet PT grades are aqueous pigment dispersion based on polymeric dispersants and inkjet quality pigments. Hostajet Magenta E5B-PT VP3565 is suitable for waterbased inkjet systems. more

    • Hostajet Magenta E7B-PT VP 5122

      Hostajet PT grades are aqueous pigment dispersion based on polymeric dispersants and inkjet quality pigments. Hostajet Magenta E7B-PT VP 5122 is suitable for waterbased inkjet systems. more

    • Hostajet Magenta E-PT

      Hostajet PT grades are aqueous pigment dispersion based on polymeric dispersants and inkjet quality pigments. Hostajet Magenta E-PT is suitable for waterbased inkjet systems. more

    • Hostajet Red D3G-PT VP 5121

      Hostajet PT grades are aqueous pigment dispersion based on polymeric dispersants and inkjet quality pigments. Hostajet Red D3G-PT VP 5152 is suitable for waterbased inkjet systems. more

    • Hostajet Yellow 4G-PT

      Hostajet PT grades are aqueous pigment dispersion based on polymeric dispersants and inket quality pigments. Hostajet Yellow 4G-PT VP2669 is suitable for waterbased inkjet systems. more

    • Hostaperm Blue BT-617-D

      Hostaperm Blue BT-617-D is a greenish blue pigment stabilized against flocculation with the outstanding fastness properties of this group of pigments. Hostaperm Blue BT-617-D is slightly redder in reduction and somewhat more opaque in full shade than Hostaperm Blue BFL. more

    • Ink Jet Magenta E 02

      Ink Jet Magenta E 02 is a specially designed pigment for use in inkjet inks. Narrow particle size distribution and high purity offer very good stability in inkjet inks. more

    • Ink Jet Magenta E5B 02

      Ink Jet Magenta E5B 02 is a specially designed pigment for use in inkjet inks. Narrow particle size distribution and high purity offer very good stability in inkjet inks. more

    • Ink Jet Magenta E7B VP 3958

      Ink Jet Magenta E7B VP 3958 is a specially designed inkjet grade with high chroma. Recommended for use in UV-, solvent- and waterbased inks. more

    • Ink Jet Yellow 4G

      Ink Jet Yellow 4G is a specially designed pigment for use in inkjet inks. Narrow particle size distribution and high purity offer very good stability in inkjet inks. more

    • Ink Jet Yellow 4G 01

      Ink Jet Yellow 4G 01 is a specially designed inkjet grade pigment with excellent overall fastness properties. Recommended for use in UV- and solvent-based inks. more

    • Ink Jet Yellow 4GC

      Ink Jet Yellow 4GC is specially designed inkjet grade pigment with very good overall fastness properties. Recommended for for use in UV-, solvent- and waterbased inks. more

    • Ink Jet Yellow 5GX-W VP 5163

      Ink Jet Yellow 5GX-W VP 5163 is a specially designed inkjet grade for use in waterbased inks. more

    • Ink Jet Yellow H2G

      Ink Jet Yellow H2G is a specially designed high performance pigment for use in solvent an UV-based inkjet inks. more

    • Ink Jet Yellow H4G

      Ink Jet Yellow H4G is a specially designed high performance pigment for use in inkjet inks. It has very good stability in solvent and UV-inkjet inks and reduced particle size and narrow particle size distribution. more